SCM Queue Error

Dear Sir,
While doing the CCR Activity, I am getting an error "APO Indicator not active for the material in the plant" in R/3 Inbound.
Request you to please help me out getting the solution for this problem.
Thanks in advance,
Vinit P. Deshmukh.

Hi
Can u please update what is the exact transaction for which you are doing CCR
If it is wrt to material, check whether MRP Type - whether some one changed from X0
If is wrt to Transaction data like SA, check the planning indicator
regards
Vijay

Similar Messages

  • What kind of red entries we see in general in SCM Queue Manager?

    Hi Experts,
    When does SCM Queue Manager comes into picture? What kind of red entries we see in general in SCM Queue Manager? Explain with atleast 2 examples.
    Thanks in Advance.
    Suvecha

    Hi,
    You are taking a planning run in APO. System has created orders. These orders need to flow to R3.
    This you need to carryout in /SAPAPO/CCR. If these orders are not moving to R3 , system will throw error message.
    This error message you can find in /SAPAPO/CQ or SMQ1 or SMQ2 depending upon queue type.
    This error you need to rectify. Then only orders will flow to R3.
    This is applicable both from R3 to APO and APO to R3.
    You can further info in details in CIF help library.
    Thanks,
    nandha

  • Inbound queue error

    Hi Gurus,
    I am facing a problem with inbound RFC Queue,error message is logical system not defined in table smof_erpsh.
    i hav e cheked the table but not too sure about how to activate the queue.
    please help.
    Regards,
    Samarjit

    Sounds like you switched backends on the CRM system.  You can only have one ERP backend connected to a CRM system, in a normal typical landscape without special customizing.
    You may also had a system that was copied from the original backend that is now trying to send bdocs to your crm system.  Can you tell us a little more about your system landscape and we can then see what needs to be done?

  • Inbound queue error"XI Error APPLICATION_ERROR.ABAP: Queue stopped"

    Hi,
    In  SMQ2 ,we have received inbound queue error "XI Error APPLICATION_ERROR.ABAP: Queue stopped".When activate queue error is not going.So please advice.
    Thanks,
    Praveen

    Hello Mr,
    Have a look into SAP Notes: 824554, 906435, 783515, 910649, 706563.
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    To be more helpful, can you post here complete error log?

  • Alert Monitoring - ID failures and Queue errors

    Hi,
    In our project we need to trigger alerts for cases apart from Mapping Errors, Application Errors and Adapter Erors like the cases mentioned below :
    1. A Message gets stuck in the QUEUE of ECC system
    2. The ID has errors like the Receiver Determination has errors.
    How can we trigger the Alerts and see them in Our Alert Inbox .
    Regards,
    Arunava

    Hi ,
    For runtime errors , you can trigger an alert.
    I don't think so, it is possible to trigger an alert when message is stuck in Queue, but if you get any error either system error or application error then you can trigger an alert.
    For more-
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    If you have got any errors like communication errors because of Queue error, then you can think of configuring CCMS alerts.(i.e alerts for Components)
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
    Regards,
    moorthy

  • HT3669 My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error"  However, it will print if I directly connect my laptop to this printer via the USB connection.  Any ideas?

    My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error"  However, it will print if I directly connect my laptop to this printer via the USB connection.  Any ideas?

    It's all about setting up what ever version of windows you have running on your pc to share the printer. If you still get stuck post in a windows forum for help.

  • QRFC Outbound queue errors

    Hi All,
    I have some "qRFC Outbound queue errors" in the production system of R/3 and the target system is CRM.
    The status is "SYSFAIL " .
    Can anybody tell me how to solve them.
    Regards,
    Anindya

    HI Anindya,
    It's a very simple error. You have to check with your Security System Administrator if the user has included in your profile the authorization object S_RFCACL. Before this you have to define RFC Trusted / Trusting Systems in your Landscape.
    Reward Points if helpful
    Cheers
    Manohar

  • BDC_CLOSE_GROUP, queue error at

    I want to record the transaction MM01, i am on sap4.0 B, the moment i do the recording and click save , it shows a dialog box saying get transaction, then i click on yes, at that moment it throws an error
    BDC_CLOSE_GROUP, queue error at . Please check the system log
    Can anyone help, is this is a authorization error....???
    Or how should i remove this....?
    <b>Points will be rewarded</b>

    Runal,
    Might be you have opend multiple BDC groups and have not closed them properly.
    Regards,
    Sujatha

  • Queue error in BPM

    Hi,
    We are working in PI7.0. We have implemented an integration scenario where we use iDocs and BPMs.
    When we start the workflow, we get the following error in queues: "Copy Sender from Payload: Sender is Missing in Pay", and the queue gets blocked.
    In another similar scenario, we use the same iDoc header directed to the same destination, and the queues do not get blocked.
    Which is the problem?
    Thanks in advance,
    Samantha.

    Hi,
    Copy Sender from Payload: Sender is Missing in Pay
    1. Cross check the mapping again, have you assigned all the required fields for header mapping
    2. If you are not doing header mapping in payload  then Cross check in Integration directory that the checkbox " Apply control from payload" in receiver comm. channel for IDOC is unchecked.
    Regards,
    Sachin

  • Improt queue error

    Hi All,
    i am using two system landscape ecc6.0, i had configured TMS and, and also established rfc.
    my problem is that when i tries to import the queue from DEV in PRD server its throwing an error
    An error occurred when opening the source file for reading.
      File name: R900434.DEV
      Directory: $TR_DATA
      Error code: 16
    Definition of the error codes:
    03   RFC system failure
    04   RFC communication failure
    11   invalid EPS subdirectory
    12   sapgparam failed
    13   build directory failed
    14   no authorization
    15   build path failed
    16   open failed
    17   read directory failed
    18   read attributes failed
    System Response
    Transmission was terminated.
    Procedure
    Eliminate the cause of the error and restart the transmission.
    Thanks in Advance
    vijay

    Graham,
    when i run STMS > Import Overview > Import Queue > Check > Transport Tool?
    I am getting my two systems and they are not showing any errors..
    the following are displaying...........
    Check Transport Tool
            DEV Development Server
                tp Interface
                Transport Profile
                RFC Destination
                tp Call
            PRD Production Server
                tp Interface
                Transport Profile
                RFC Destination
                tp Call
    Thanks
    vijay

  • JSM QUEUE ERROR - WEBLOGIC SERVER

    I have created a JMS queue and deployed it in weblogic server. But I am getting the following error while running the proxy service:
    " <Jun 18, 2009 5:22:32 PM IST> <Error> <OSB Kernel> <BEA-382004> <Failed to proce
    ss request message for service ProxyService Database-File/DatabasePoll: com.bea.
    wli.sb.context.BindingLayerException: [JMSPool:169803]JNDI lookup of the JMS con
    nection factory EramIn failed: javax.naming.NameNotFoundException: Unable to res
    olve 'EramIn'. Resolved ''; remaining name 'EramIn'
    com.bea.wli.sb.context.BindingLayerException: [JMSPool:169803]JNDI lookup of the
    JMS connection factory EramIn failed: javax.naming.NameNotFoundException: Unabl
    e to resolve 'EramIn'. Resolved ''; remaining name 'EramIn'
    at com.bea.wli.sb.context.ContextUtils.createBindingLayerException(Conte
    xtUtils.java:924)
    at com.bea.wli.sb.pipeline.PipelineContextImpl.doDispatch(PipelineContex
    tImpl.java:595)
    at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextI
    mpl.java:498)
    at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeSt
    ep.java:128)
    at com.bea.wli.sb.pipeline.debug.DebuggerRuntimeStep.processMessage(Debu
    ggerRuntimeStep.java:74)
    Truncated. see log file for complete stacktrace
    com.bea.wli.sb.transports.TransportException: [JMSPool:169803]JNDI lookup of the
    JMS connection factory EramIn failed: javax.naming.NameNotFoundException: Unabl
    e to resolve 'EramIn'. Resolved ''; remaining name 'EramIn'
    at com.bea.wli.sb.transports.jms.JmsOutboundMessageContext.send(JmsOutbo
    undMessageContext.java:537)
    at com.bea.wli.sb.transports.jms.JmsTransportProvider.sendMessageAsync(J
    msTransportProvider.java:680)
    at sun.reflect.GeneratedMethodAccessor334.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    Truncated. see log file for complete stacktrace
    javax.jms.JMSException: [JMSPool:169803]JNDI lookup of the JMS connection factor
    y EramIn failed: javax.naming.NameNotFoundException: Unable to resolve 'EramIn'.
    Resolved ''; remaining name 'EramIn'
    at weblogic.deployment.jms.JMSExceptions.getJMSException(JMSExceptions.j
    ava:29)
    at weblogic.deployment.jms.JMSConnectionHelper.lookupConnectionFactory(J
    MSConnectionHelper.java:485)
    at weblogic.deployment.jms.JMSConnectionHelper.openConnection(JMSConnect
    ionHelper.java:268)
    at weblogic.deployment.jms.JMSConnectionHelper.<init>(JMSConnectionHelpe
    r.java:144)
    at weblogic.deployment.jms.JMSSessionPool.getConnectionHelper(JMSSession
    Pool.java:500)
    Truncated. see log file for complete stacktrace
    Please help

    I have created a JMS queue and deployed it in weblogic server. But I am getting the following error while running the proxy service:
    " <Jun 18, 2009 5:22:32 PM IST> <Error> <OSB Kernel> <BEA-382004> <Failed to proce
    ss request message for service ProxyService Database-File/DatabasePoll: com.bea.
    wli.sb.context.BindingLayerException: [JMSPool:169803]JNDI lookup of the JMS con
    nection factory EramIn failed: javax.naming.NameNotFoundException: Unable to res
    olve 'EramIn'. Resolved ''; remaining name 'EramIn'Are in Product ion domain or Development domain?It might be due to fact that JMS Q is not targeted for any JMS server. Can you please paste the XML files on from the $DOMAIN_HOME/config/jms/.
    Cheers
    Manoj

  • SMQ2 (Inbound Queue) : Error occurred during character conversion

    Hi,
    In SMQ2 an Inbound Queue has failed with status text "Error occurred during character conversion". The XML message inside this queue is in waiting status with status text " Scheduled for Outbound Processing" .
    Even after cancelling this message from SXMB_MONI, and reposting the PO, still again the queue and the XML message inside the queue are in same status.
    As this is in XI production system, requesting to provide some suggestion ASAP.
    Thanks,
    Mateen.

    The queue status is still sysfail. There is only 1 message waiting in the queue.
    I think that the queue might be locked for some reason and after unlocking the queue and restarting the message, the message will get processed successfully.
    But before working on this I want to make sure that the queue is locked.
    Do you or anyone else know how and from where can I check whether the queue is locked or unlocked?
    Regards,
    Mateen.

  • TRFC Queue Error "Unable to interpret BGUA as a number"

    Hi all,
    I am getting the below error message in TRFC queue
    "Unable to interpret BGUA as a number" when i do a datamart dataload from ODS to Cube. ODS is getting data from datasource 0CO_OM_CCA_9. Can anyone help how to resolve this issue?.
    Thanks & Regards,
    Muruganand. K

    What is  BGUA ??
    I think you have mapped this field (BGUA holding infoobject) to number or key figure field.
    Check your  mapping in transformation form ODS to CUBE.
    Hope this helps.

  • SAP SCM Console error

    Hi SAP Friends,
    Iam using a SAP SCM IDES version 5.0. while posting transactions in SCM system the system dose not responce after 2 hours of starting the management Console. When i had a look at the management console the first instance status was ended and the message server was disconnected. When i shut down and restart the system SCM works fine for another 2 hour. This was happning for the past 2 days. Today when we tryed to run the console the following error poped up when i clicked on the Process List.
    Getprocesslist failed: FFFFFFF
    End of file or no input: "Unknown error"
    All the status shows as Ended and the message server gets disconnected.
    In the Syslog the following warning message is shown:
    SAP-Basis System: Stop Msg Server, PID     1304
    Avaiting responce from the SAP Gurus out there.
    Thanks in advance.
    Regards,
    Sivabalan.K.S.

    Solved by setting up the back up for Live Cache

  • CIF Queue Error

    Dear All
    After transfering the data from R/3 to APO system it going in error mode as show in transaction code /N/SAPAPO/CQ. But after selecting and activating the , it is clear and updating the APO Tables. Can it be automatic, please suggest the solution ?
    Regards
    Vimal

    Hi Vimal,
    Check on the following lines.
    1) Check Distribution definition & object specific settings are made under
    APO customisation
    2) Check the performance of livecache using basis team
    3) Carry out /sapapo/ccr for the transactional data which is often
    getting struck
    4) Check whether any sysfails/errors/queues struck in the system,
    study the application logs and take corrective action and then
    retransfer and check
    5) If the above points did not resolve your query, mention the
    error you are facing
    Regards
    R. Senthil Mareeswaran.

Maybe you are looking for