SCM Quota Arrangement Data transfer

i am trying to do BDC recording for Quota arrangement header data (/SAPAPO/SCC_TQ1). while processing the recording (SM35) i am not able to get the subscreen in order to fill the header level details.
Here is my recoding data:
perform bdc_dynpro      using '/SAPAPO/SAPLOO_TR_QUOTA' '0010'.
perform bdc_field       using 'BDC_CURSOR'
                              '/SAPAPO/S_TRQTASEL-LOCNO'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CHANGE'.
perform bdc_field       using '/SAPAPO/S_TRQTASEL-MODEL'
                              WA_TAB1-MODEL.
perform bdc_field       using '/SAPAPO/S_TRQTASEL-LOCNO'
                              WA_TAB1-LOCATION.
perform bdc_field       using '/SAPAPO/S_TRQTASEL-VERSINDEP'
                              'X'.
perform bdc_field       using '/SAPAPO/S_TRQTASEL-QTDIRI'
                              'X'.
perform bdc_dynpro      using '/SAPAPO/SAPLOO_TR_QUOTA' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=%_GC 118 10'.
perform bdc_dynpro      using '/SAPAPO/SAPLOO_TR_QUOTA' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=0121_OK'.
*perform bdc_field       using 'BDC_CURSOR'
*                              '/SAPAPO/S_TRQTAHALVIO-DVALTO'.
perform bdc_field       using 'BDC_SUBSCR'
                              '/SAPAPO/SAPLOO_TR_QUOTA 0121DETAIL'.
perform bdc_field       using 'BDC_CURSOR'
                              '/SAPAPO/S_TRQTAHALVIO-DVALTO'.
perform bdc_field       using 'GS_0121-MAT_SINGLE'
                              'X'.
perform bdc_field       using '/SAPAPO/S_TRQTAHALVIO-MATNR'
                              WA_TAB1-PRODUCT.
perform bdc_field       using '/SAPAPO/S_TRQTAHALVIO-DVALFR'
                              WA_TAB1-S_DATE.
perform bdc_field       using '/SAPAPO/S_TRQTAHALVIO-DVALTO'
                              WA_TAB1-E_DATE.
perform bdc_dynpro      using '/SAPAPO/SAPLOO_TR_QUOTA' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
I have tried Bapi method also for the same
Business object: BUS10009
Method: SAVEMULTIPLE2
But the data is not getting posted.
Please give your inputs on the same.
Regards,
Avijit Khajanchi.

Hi,
    check with Function module ME_UPDATE_QUOTA in function group MEQU.
Thanks,
Asit Purbey.

Similar Messages

  • CIF - Master Data Transfer from ERP to SCM(SNC)

    Hi,
    I am very new to SAP SCM.
    Can anyone please provide me documentation links , helpful material for the CIF customization in SNC for Master Data Transfer.
    e.g If I need to send a predefined value for Business Logical System from ERP to SAP SNC
    i.e from ERP 1 to SNC ( Business Logical System ends with suffix 00 )
    and  from ERP 2 to SNC ( Business Logical System ends with suffix 01 )
    Where and how I can make these changes to reflect in my data sending.
    How I can achieve this.
    Please help.
    Best Regards
    Sid

    Siddharth,
    I assume when you say 'SNC' your are referring to Supply Network Collaboration. Here are some Best Practices Building blocks to get you started
    [B02 - connectivity|http://help.sap.com/bp_scmv250/BBLibrary/HTML/B02_EN_DE.htm]
    [B05 - replication|http://help.sap.com/bp_scmv250/BBLibrary/HTML/B05_EN_DE.htm]
    [S32 - SCM Collaboration|http://help.sap.com/bp_scmv250/BBLibrary/HTML/S32_EN_DE.htm]
    There are many more building blocks at
    http://help.sap.com/bp_scmv250/BBLibrary/HTML/BBLibrary_EN_DE.htm
    Regards,
    DB49

  • Scheduling Agreement and Quota arrangement

    Dear all,
    Kindly share with me the individual steps involved in in creating Scheduling Agreement as well as Quota arrangement procurement process with T.Codes and also the relevant configurations involved.
    Thanks a lot.

    Hi,
    Here is all about Quota arrangement :
    Following are the configurations.
    1) To specify number range for quota arrangement
    SPRO > IMG > MM > Purchasing> Quota arrangement> Define number range (Int or Ext)
    2) Set Quota arrangement usage indicator:
    SPRO > IMG > MM > Purchasing> Quota arrangement> Define quota arrangement usage
    On Application side following are the prerequisites
    1) Create Quota arrangement
    SAP Menu> Logistic> MM > Purchasing> Master Data> Quota arrangement > Maintain
    2)specify procurement type : Int / Ext
    3)Where appropriate specify the special procurement type For ex stock transfer
    4) Enter the vendor or supplying plant
    5) Specify the quota you want to assign to this source
    Please understand terms as below,
    Quota Rating = Quota allocated Qty +Quota Base Qty /Quota
    Quota Base Qty: Quantity used for manual control of the quota Arrangement (For example new source is included)
    Quota: Number that determines how requirement are apportioned among various sources .Decided by a Purchasing people based on confidence on source.
    I source determination source with lowest quota arrangement will always be assigned
    Example
    Source Quota    allocated Qty      Quota Rating
    M             1                   100                     100
    N              2                   150                     75
    O             3                     75                      25 *
    In above case vendor O will be assigned as low Rating *
    Now quota Base Qty will come into picture when new supplier is introduced. As you have seen that vendor with low quota Rating is assigned .In case of new supplier as no allocated qty earlier its Quota rating will always be low & all Qty will be allocated to him. To prevent this Base qty is added to allocated Qty so that accordingly it will determined accordingly
    If Quota base Qty is 100   & quota is 2
    For new vendor X rating will be
    Quota rating = 100 + 0 / 2 = 50
    I hope this gives you entire clarity.
    Vivek

  • What is the difference between copy requirement and data transfer routines

    Hi Experts,
    I am writing a copy control routine for maintainence quote
    from sales quote.Where do i have to write it in VOFM?
    Is it in copying requirements or data transfer.
    Actually according to the business all the line items from the sales quote are copied
    into the maintainence quote and additional line items are added into maintainence quote
    and the line items copied from the source document are linked to the two newly added
    line items.
    Please advise.
    And is it possible to add the 2 new line items to the new document into VBAP at the runtime?
    Regards,
    Chitrasen

    First of all you have to have a link between the sales documents. You can check it in Tcode: VTAA. if not, talk to your functional people. Try to make this equal to quote to order but instead make it quote to quote.
    You need to put break point in copy requirement as well as in data transfers and check for your requirement.
    Well, the code you want to put in will be the requirement
    I am not sure if you can add 2 line items runtime into quote. this has to go through different checks and i dont think it is possible.
    Good luck

  • How to calculate the quota base quantity in quota arrangement?

    Hi all,
    As we all know, when a new supplier is added in the quota arrangment, we take the help of quota base qunatity so that the new supplier does not get any unfair advantage over the existing suppliers. Would you please help me on how to calculate the quota base quantity or on what basis the quota base quantity is calculated?*
    Regards,
    Ranjan

    Dear,
    Quota arrangement divides the total requirements generated over a period of time among the sources of supplied by assigning a quota.
    Quota u2013 quota is equal to a number and its represents the proportionate of requirements. Total quota of all the vendors is equal to 100% of requirements.
    This quota arrangement is also specific to material and plant level.
    Quota rating = quota allocate quantity + quota base quantity / quota.
    Quota based quantity used only when a new vendor introduced.
    In the as on date situation, the minimum quota ratings will considered as preferred vendor.
    The 2 vendors has 2 same quota rating, the vendor who is having the highest quota will considered first.
    In the running quota, a new source of supply is included. (In situation of short supply) including a new source not means to reduce the quota for existing.
    Regards,
    Syed Hussain.

  • How to know if a MRP run element is using Quota Arrangement and lot size?

    Hi all,
    Two questions:
    A) How to determine if a source is actually pulled from Quota Arrangement?
    I am wondering if there is anyway from ABAP table or from Transaction (i.e. Purchasing Order) in which the source is pulled from a Quota Arrangement?
    We use scheduling agreement, PIR and source list, and as well as Quota Arrangement for our purchasing.
    I just want to know how, from system (table and transaction), to find out the source is from quota, not from PIR or others.
    B) Quota Arrangement still can work properly if lot-size procedure's splitting quota indicator not Checked?
    If my the lot-size procedure which I am using for a material does not activate the splitting quota indicator, it means split quota will not work during MRP run.
    But does this also mean that quota arrangement will not be working for this particular material even if I have create a a quota arrangement object (via MEQ1) for this material?
    Thanks
    Daniel

    Tomek,
    If I want to use the split quota, it seems there is some pre-requisite.
    If you go to MEQ1 and press F1's on the "Minimum qty split" column, and you will notice the following message.
    Allocation by quota using splitting quotas is only carried out via a requirement planning run, subject to the following preconditions:
    Through the appropriate entry in the field Quota arrangement usage (on the MRP data screen 2 or Purchasing screen) it must have been specified that a quota arrangement is to be applied in the planning run.
    The indicator for the splitting quota must be set for the the lot-sizing procedure used for materials planning purposes in Customizing.
    Hence, the quota arrangmeent still workable even if the lot-size does not have the spliting quota box checked?
    Indicator: Splitting quota in short-term horizon
    The indicator for splitting is used to determine that in the case of the selected lot size, the quota arrangement is to be applied using the splitting logic.
    Use
    If this indicator has been set, the lot is split up in the planning run according to the following formula:
                                quota for source X
    Quantity for source  X = --------------------- * requirement
                               sum of all quotas

  • Regarding Quota Arrangment

    Dear Gurus,
    I have to activate quota arrangement in our organization. I have done the following steps to active the quota arrangement, 1)Activated the Quota arrange usage in material master.
    2).Activated the Source list in material master. 3)Created the product requirement
    4).Maintained the quota arrangement for Vendor X and Vendor Y 50 percent accordingly
    5).Material requirement planning - MRP run for particular product
    As per the quota arrangement in this stage PR should create for Vndr X and Vndr Y. But it is not happing.
    Your answer will be highly appreciated.
    Reg/ Shankar G.

    Dear All,
    Thanks for your valuable replies; I have done the quota arrangement successfully.
    The following functions are done to achieve the goal.
    u2022     I have created the info record for both vendors.
    u2022     Activated the Quota arrange (3) usage in Material Master (Purchasing)
    u2022     Activated the source list-purchasing
    u2022     Maintained the quota arrangement thru MEQ1 for particular material
    u2022     I have assigned 50% for 2 vendors
    u2022     We have to maintain Lot size data as a u201CFSu201D, fixed lot size field enter sum Value and also enter the rounding
                         value.   Eg- if you enter the fixed lot size 5000, you can enter the rounding value 2500. Then 2 PRu2019s will as per our
                          quota arrangement.
    u2022     Material requirement planning(MRP) run for the product thru MD02
    Reg/ Shankar G.

  • Source determination with referance to quota arrangement

    Dear all
    I had created quota for vendor A & Vendor B for a material M100, I had also defined quota arrangement usage in SPRO ( 3),
    While creation of PR for this material M100, I had selected the tick for source determination, But still system is not determining the source.
    Here one more observation is if I create the info record the source is determined from info record & the details are updated in quota.
    Can some one help me which other things I need to check, so that the source is automatically determined by system from quota arrangement.
    Thanks in advance
    Regards
    Pravin

    HI,
    If MIGO is done for the P.O all the datas are updated in the Purchase order history.
    When you are doing MIRO , it will take what you have entered in  the MIGO only.
    Please try
    G.Ganesh Kumar

  • Multiple Requisition  line itme for Quota arrangement

    Hello
    We are maintaining the quota arrangement master data .
    The Purchase requisition is splitting in to two line items based on the demand and assigning the Vendor on it .
    Is it the right way or some thing missing in the configuration
    Please advice me
    Thanks
    Nick

    Hi,
    1) The creation of PR depends upon the lot size you have maintained in the material master record.
    a) If you have maintained lot size as FX (Fixing & Splitting) & the splitting indicator is maintained for the lot size in customizing, then seperate PR will be generated for each vendor maintained in quota, with quantity alloted to the respective vendor as per quota arrangement & delivery date being as per requirement of the material (probably being same for all PRs).
    b) If you are using other lot size (which does not have the splitting indicator) then one PR will be generated for each demand, which will be assigned to the first vendor in line as per quota arrangement. Next PR (probably after next MRP run) will be assigned to another vendor which will be next vendor as per the quota arrangement.
    2) Regarding firming, these PRs will not be firmed automatically. If required, you will have to firm the same manually.
    Regards,
    Prashant
    - Pl. reward points if the answer is helpful to you

  • Quota Arrangement in LTP

    Hi Gurus
    In LTP Business Process my requirement is like this
    1) One Fert Material Contains one ROH in BOM of Qt1
    2) The ROH contains 2 vendors
    3) I want to give the quta of ROH in 40% and 60%
    SO in LTP i need 2 planned orders for ROH even if i my requirment for Fert is single
    Pl explain me the settings required for the same
    K.Prabakaran

    Hi,
    In MEQ1 , pls check the foll.
    1. Min Qty splitting - the minimum quantity that a lot must have in order to be apportioned among several sources of supply in the planning run.
    Check whether order qty is more than this min qty.
    2. Also check the valid from and to dates.
    Allocation by quota using splitting quotas is only carried out via a requirement planning run, subject to the following preconditions:
    Through the appropriate entry in the field Quota arrangement usage (on the MRP data screen 2 or Purchasing screen) it must have been specified that a quota arrangement is to be applied in the planning run.
    Regards,
    Sheik
    The indicator for the splitting quota must be set for the the lot-sizing procedure used for materials planning purposes in Customizing.

  • Can someone pl explain Quota arrangement process in MM?

    Hi Folks,
    I am new to MM, could someone pl explain the quota arrangement steps step by step anything with screen would be very helpful
    for beginners like me with examples. 
    Also could some also pl tell me the Source priority in terms of Source of supply?
    Thanks.
    Steve

    Dear,
    Quota Arrangements :
    In simple words: Distributing the requirements quantity between potential source of suppliers (Vendors) - basing on their order fulfillment capacity.
    In business terminology:
    Quota arrangements allow you to define target percentages and distribute them between two or more purchasing contracts. A quota arrangement ensures that a contract is guaranteed both a minimum sales volume and a percentage of the total purchasing volume of the product category or product. A quota arrangement has the highest priority in the sourcing process.
    Quota Arrangements
    Quota Arrangements means a mechanism enabling the system to compute which source of supply to assign to a requirement for a material.
    If a material can be obtained from various sources of supply, each individual source of supply can be allocated a quota arrangement. The quota arrangement is valid for a certain period of time and specifies exactly how the receipts are to be distributed amongst each source of supply.
    We can set the quota arrangement for in-house production as well as for external procurement. Setting quotas permits the automatic apportionment of a total material requirement over a period to different sources.
    Sources of supply can be:
    - an individual vendor or outline agreement
    - another plant, from which material should be procured
    - a production version
    Quota Arrangement Usage
    The quota arrangement facilitates the determination of the applicable sources of supply for the following at a certain time.
    Purchase orders
    Scheduling agreement delivery schedules
    Planned orders
    Purchase requisitions
    Materials planning and control
    In customizing activity, we specify for each material master record which quota arrangement rule is allowed. We group the usage combinations you have chosen under different keys.
    We have to assign quota arrangement usage key to material master record in purchasing or MRP2 view (Maintaining Material Master Record T.Code MM01)
    The quota arrangement usage determines whether a material is included in a quota arrangement and which operations lead to a quota arrangement.
    We have to maintain the quota file for the material. Here we define the sequence of the sources of supply, the quotas per source of supply and numerous other parameters in the quota file.
    Maintaining the Quota File
    A quota arrangement file consists of quota arrangement records identifying the source (such as a vendor or an internal plant), the validity period, and the quota allocated to each source.
    We can maintain the quota file. Following are the steps for maintaining this file.
    T. Code: MEQ1
    The initial screen for maintaining quota appears.
    Enter the material number and the plant for the material that you want to use to maintain the quota file and choose. The header screen for maintaining quotas appears.
    Enter the Valid to date for the quota arrangement item.
    We can only define continuous validity periods for one material. In the first interval, the system sets the current date in the Valid from field. The Valid from dates of the other intervals are set continuously so that the day after the end date of the last quota item is set as the start date for the next item.
    If we want to work with splitting quota arrangements, we will enter a minimum quantity here.
    Double-click on the item to process.
    The item screen now appears.
    Here we will define the source of supply and other control parameters per item.
    Allocating the source of supply to the quota item determines the procurement type that the procurement proposal receives. Therefore, we can specify via the quota arrangement that, for example, 75% of a material is produced in-house and the other 25% is procured externally.
    Save entries.
    Regards,
    Syed Hussain.

  • Source determination,Quota Arrangement Process

    Hi,
    Plz tell me how to maintain Source determination,Quota Arrangement.step by step

    Dear,
    QUOTA ARRANGEMENTS
    If a quota arrangement exists for a material, it has the highest priority during source determination. Like source list, the quota arrangement facilitates the administration of sources of supply at plant level.
    If you procure a material from different suppliers, you can assign a quota to each individual supplier. A quota arrangement applies to a certain period and specifies how the receipts should be distributed among each source of supply.
    If a quota arrangement exists, this does not mean that the quantity of a single manually created purchase requisition is automatically apportioned among different sources. In such case, the entire quantity of the requisition is assigned to one source u2013 the source that is next in line receive the relevant order.
    Before you can maintain a quota arrangement item with the procurement type external procurement, a source of supply (info record and / or outline agreement) must exists.
    Create quota arrangement:
    LOGISTICS u2013MATERIAL MANAGEMENT u2013 PURCHASING u2013 MASTER DATA u2013 QUOTA ARRANGEMNET u2013 MAINTAIN.
    Specify number ranges for quota arrangement:
    SAP IMG u2013 MATERIAL MANAGEMENT u2013 PURCHASING u2013 QUOTA ARRANGEMENT u2013 DEFINE NUMBER RANGES.
    You must specify the business application for which quotation arrangement will be used, for example: in material planning or in purchase requisitions. You make this specification in QUOTA ARRANGEMENT USAGE filed, which is to be found in the plant-specific purchasing/materials planning data of the material master record.
    Set quota arrangement usage indicator:
    SAP IMG u2013 MATERIALS MANAGEMENT u2013 PURCHASING u2013 QUOTA ARRANGEMENT u2013 DEFINE QUOTA ARRANGEMENT USAGE.
    System assign quota rating to each source by calculation as u2013 Quota rating = (quota allocated quantity + quota base quantity / quota).
    ADDITIONAL ASPECTS OF SUPPLY SOURCE DETERMINATION
    Quota arrangements also can be source of supply.
    Quota arrangements for material requirements arising over a certain period divided up among different sources on basis of quota. Quota arrangements determine which source of supply is automatically assigned to a purchase requisition.
    SOURCE DETERMINATION
    The purpose of the source determination process is to automatically assign a source of supply to a purchase requisition, if source determination indicator set in the requisition header, the system searches for possible sources of supply for all the items of the requisition. Quota arrangements also can be source of supply.
    In source list specify a preferred source as fixed for a certain period, the system suggest just only this source, even if other potential sources exists.
    Quota arrangements for material requirements arising over a certain period divided up among different sources on basis of quota. Quota arrangements determine which source of supply is automatically assigned to a purchase requisition.
    Source list record consists of the following:
    1.Validity period u2013 Period of validity
    2.Key source data u2013 Number of vendor and responsible purchasing organization or number and item of outline agreement.
    3.Fixed source u2013 Within a validity period not more than one source should be flagged as fixed.
    4.Procurement plant u2013 if the materials can be procured from a plant or another point within your firm, enter the plant number in PPl field and leave the field for the vendor number empty.
    5.Blocked source u2013 To block a source. If you set Blocked indicator and enter only one validity period, the material is excluded from external procurement; that is, it cannot be ordered during this period.
    6.Material requirements planning  - You use MRP indicator to determine whether an automatic source determination process is carried out during the requirements planning run. The appropriate source is then automatically assigned to a purchase requisition, or scheduling agreement delivery schedule lines can be generated directly via planning run.
    If an attempt is made to order a material subject to a source list requirement from a source that is not included in the source list, the standard system issues an error message with the text: Source not included in list despite source list requirement. You can change this to warning message.
    If source list requirement defined for a plant, all materials in the plant level must be maintained with source list before procurement.
    Analyze source list:
    LOGISTICS u2013 MATERIAL MANAGEMNET u2013 PURCHASING u2013 MASTER DATA u2013 SOURCE LIST u2013 FOLLOW ON FUNCTIONS u2013 ANALYSE.
    Define source list requirement at plant level:
    SAP IMG u2013 MM u2013 PURCHSING u2013 SOURCE LIST u2013 DEFINE SOURCE LIST AT PLANT LEVEL.
    Source lists can be created:
    -Manually.
    -Create from within an outline agreement u2013 on outline agreement overview screen, select an item for which you wish to enter source list record and choose ITEM u2013 MAINTAIN SOURCE LIST.
    -Creation from with an info record u2013 you can enter vendor in the source list when creating or changing a purchasing info record. Choose EXTRAS u2013 SOURCE LIST. If the info record valid for entire purchase organization, you can create the source list for all plants of the organization in question. Choose the plant via GOTO u2013 PLANT.
    -Automatic u2013 can generate by system automatically.
    Create source list manually:
    LOGISTICS u2013 MATERIAL MANAGEMENT u2013 PURCHASING u2013 MASTER DATA u2013 SOURCE LIST u2013 MAINTAIN/DISPLAY.
    Generate source list automatically:
    LOGISTICS u2013 MATERIAL MANAGEMENT u2013 PURCHASING u2013 MASTER DATA u2013 SOURCE LIST u2013 FOLOW ON FUNCTIONS u2013 GENERATE.
    Regards,
    Syed Hussain

  • Error with LSMW IDOC method while maintaining Quota arrangement

    Hi
    I am trying to create LSMW using IDOC method for maintaining quota Arrangment.
    I used the standard Message type LPIEQU. Idoc is getting generated and when i tried to process this IDOC i am getting error "Function module not allowed: BAPI_IDOC_INPUT1".
    I used the process code as "BAPI" in message type LPIEQU configuration in WE20.
    If anyone faced this issue please let me know the reason for the error.
    sakthi.K

    see OSS Note 198252 - Special features of POI message category LOI*
    The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.

  • Using TCP or shared variable for data transfer

    I am trying to send a large amount of numbers from a real-time module to a host computer.  These numbers have been arranged into a large array, such as an array with 10s of thousands of points.  The time critical portion of getting the information has already been done, so the data transfer back to the host VI is not time critical.  I know I will need to break the large array down into smaller arrays and then reform the large array after all the information has been sent.  I know how to use both TCP and shared variables with FIFO.  What I am unsure of is which one is better to use for this application.  I do not know what the maximum size arrays I can send through either.
    Also, from what I have gathered from using LabView is that the sender has to be listening for a connection before the client opens a connection, or else it will throw an error.  When I tried breaking it down into 50 points, if i did not wait long enough in the host VI or if I did not put a long enough wait function in the RT loop, and error would throw, so it would take a long time to transfer the data when it worked properly.
    Any help or suggestions is appreciated, thanks.

    Regarding the array size question, there is no real limit (other then the amount of memory in your system) to the size of data that you can transfer in a single block using either TCP or the Shared Variable. In your case you can easily transfer an array with 10's of thousands of data points in a single write operation. Both TCP and the Shared Variable will automatically handle breaking up the data for the maximum packet size on Ethernet and then reconstitute the array on the receiving end. In LabVIEW you will simply get back the array as a whole without needing to worrying about how the data is broken into smaller packets on the Ethernet.
    I tested the attached example which transfers 400kB per block (50000 Doubles) without any problems. You do need to have the Server (in this case RT) running first before the client (Windows) can connect.
    Message Edited by Christian L on 02-09-2007 11:34 AM
    Christian Loew, CLA
    Principal Systems Engineer, National Instruments
    Please tip your answer providers with kudos.
    Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
    or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
    to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense
    Attachments:
    TCP.JPG ‏44 KB

  • Information about   Data Transfer in mySAp retrail

    Hello
    I have a quetion  I need to learn about Data Transfer  then I have a guide to Initial Data Transfer in mySAP  retrail  version 1.2  Octuber 2001.
    So, my question is: Are there another guide most recently about this topic? or  these  guide is fine  for starting.
    Thanks  for  your answers
    Danny

    Hello,
    You have posted a question that is related to system transports. Unfortunately this category is not related to these kind of questions. SAP TM deals with logistics in the real world - moving pallets, containers, loading trucks, etc.
    To learn more about SAP TM please visit [http://service.sap.com/scm-tm|http://service.sap.com/scm-tm]
    Therefore I will now move this thread to the category Software Logistics. Thank you for your understanding.
    Kind regards,
    Nico van Os.

Maybe you are looking for