SCOM 2012 Linux Monitoring - RPCBIND, RPCIDMAP, RPCSTAT services not running

We are running SCOM 2012 SP1 and added a test Linux server running Red Hat Enterprise 6.3. SCOM is reporting that the server is in Critical health because the following three services are not running.
1) Process Rpcbind Service Health - Rpcbind Mapper Not Running
2) Process Rpcidmap Service Health - NFSv4 ID Name Mapper Not Running
3) Process Rpcstat Service Health - NSM Status Monitor Not Running
My question is that are these services required to be running in order for SCOM to monitor the Linux servers properly? If yes, can you please give brief explaination as to why so I can explain that to our Linux Administrator. The Linux Administrator
is saying that we do not run these services on any of the Linux servers because they are not needed. If infact these services are not needed, how can I have SCOM ignore the critical error messages? Thanks

Yup, generally running. I'm assuming you've done a basic install of RHEL 6. All processes listed above are enabled by default on a RHEL 6 install if you take the default settings. If someone is just getting started you can pretty much guarantee
they will do a basic install of RHEL 6 and this will not be an issue.
Could it be done better... sure but at what point do you stop? We could discover all services running on the system and start monitoring them out of the box but what are important and what are not to each customer? The idea is to give you some basic monitoring
on a default install based on what each OS provider starts on a "default" install. If this does not suite your needs SCOM is very configurable and adding a custom service monitor is very easy to configure along with disabling existing ones.
If you'd like to provide feedback on this feel free to open a support ticket with Microsoft and file what we call a 'Design Change Request' [DCR]. We go though these prior to starting each update to SCOM. No guarantee it will get fixed/changed as we do have
priorities but we are listening.
Regards,
-Steve

Similar Messages

The Data access service not running or not yet initialized.

Hello guys ,
i am getting the following error wen tryin to open the console The Data access service not running or not yet initialized. on scom 2012 R2 before it was working fine but once i closed the console and open got the error
OS : Windows 2012r2 patched and scom 2012 r2
sql : 2012 r2 enuff database size
tried few things as :
1. change the account to domain admin for system center data acess service still no luck
2. created registry keys for servicepipetimeout to 6000 bt still nit working
3. Refresh sql account used for sccom data aceess service still no luck
4. the service disappears as running after 30 seconds and the console is unable to open
kindly help if some perfect resolution as lot of time has been wasted and need to meet deadlines.
thanks guys in advance
Basit Siddiqui
AIG

Check that following:
Verify permission of SCOM Account on sysadmin and OM DB.
Check firewall that is disable
Check antivirus that didn't block scom folders or services.
Check SQL services is running
Check Space of database at 5 GB as you configured. It is best practice to set the db size at a reasonable size and not to set to autogrowth.
Also you can check below link
http://vmajmudar.blogspot.com/2013/07/the-data-access-service-is-either-not.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Auto-start services not running :Shell Hardware Detection in my Health Reports

Recently I've setup up Windows Server 2012 Essentials on my Custom-made Box. All is going well so far except that i have a warning in my generated Health Report such as
Auto-start Services Not Running Shell
Hardware Detection.
I had checked My Services and found out that this particular service is scheduled to start Automatically and it is always started...
Any Advice what might be the problem?

Susan, can you still see the Connect bug? What Product/Program is it under in Connect? I can't see it but I might not be a member of the correct group.
From http://technet.microsoft.com/en-us/library/hh831394.aspx:
"After a server has been added to the Server Manager server pool, service alerts about the Shell Hardware Detection service can be displayed if there are no users logged on to the managed server. This occurs because the Shell Hardware Detection service runs
only when users are logged on to the managed server, or connected to a Remote Desktop session on the managed server. To avoid seeing Shell Hardware Detection service alerts for this case, click
Services in the thumbnails for server groups, including the
All Servers group. In the Services Detail View dialog box, on the
Services drop-down list, clear the check box for Shell Hardware Detection, and then click
OK."
That confirms that it's okay for Shell Hardware Detection not to be running. However the suggested fix--removing it from 2012 alerting--does not keep it off my 2012E Health Report.
Mark Berry
MCB Systems

Windows Modules Installer - Autostart Service Not Running

I'm receiving in my health reports for four separate WSE 2012R2 deployments the below error. I've set the service to restart upon failure, but it seems this occurs upon every server reboot until I manually go in and start the service. However,
from my understanding this service only runs when it is needed, which would leave me to a false negative in the BPA scan.
Just curious if anyone else is getting this.
Autostart Services Not Running:
Windows Modules Installer

Hi MattSla,
On current situation, please type services.msc in RUN to open Services panel. Then navigate to Windows Modules
Installer service and open Properties. In General tab, please check Startup type of this service. Did set as Manual? Meanwhile, in Log On tab, please check which account this service used to log on as? Did log on as Local System account?
I check the Windows Modules Installer service in two Windows Server 2012 R2 Essentials in my Lab environment.
It seems that this service was set as Manual. Then Generate a Health Report in Dashboard, and didn’t find any error which was related to ‘Autostart Service Not Running’.
If this issue still exists, please open Event Viewer and check if find some relevant events. Those may help
us to go further analyze.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Diagnostics policy service not running on Windows 7 home premium

I'm unable to connect to internet through wireless connectionsr . it says limited access to wi-fi router. When i try to fix this it says diagnostics policy service not running. Checked services.msc While the type is set up to automatic Unable to start the
service. I had similar problem with my LAN connection. After resetting my LAN connection i was able to connect to internet. Tried this on wifi as well but the issue remains.
Error code is 5: access denied

Hi,
Thanks for the post!
Go to your Device Manager and uninstall the network device, including the wireless network card, then restart the computer. Let the system automatically reinstall the driver for you. You can also manually update the network card driver to the latest one.
After that, check if you can connect to the internet.
For the Diagnostics policy service issue. please click Start, input regedit in the search box, press Enter to open your Registry Editor, navigate to the key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS\Parameters.
Right click this key, choose permission, click the user "Trustedinstaller", ensure the permission is set to "Full Control" and "Read". Then click OK to apply the change.
Restart the computer to check if this service is working now.
Regards,
Miya
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Window search service not running

window search service not running how i can fix it?
This question was solved.
View Solution.

Hi,
From the Desktop, hold down the Windows key and press

[mostly solved] Strigi service not running

Hello,
Since I am constantly fluctuating between a rich and a minimalistic desktop environment, I'm trying out KDE once again. The Soprano/Nepomuk/Strigi stuff seems really interesting but I fail at using it.
When I go to System Settings -> Advanced -> Desktop Search it says "Strigi service not running". While Nepomuk is activated, I can't activate Strigi. When I set the checkbox for Strigi and apply, the message is still there. When I close the widow and go back again, the checkbox is deactivated again.
The searchbar in dolphin never finds anything and there is no interface for tagging or commenting files.
However, I can index files and find stuff when I run strigiclient.
What may the problem be?
Thanks,
Viv
Last edited by V for Vivian (2010-06-30 07:48:54)

Steigi seems to be installed.
viv ~ $ pacman -Q strigi
strigi 0.7.2-2
I'm considering a clean Chakra installation but this seems kind of unaesthetic and stupid.
edit01: I've just renamed my .kde4 folder and restarted KDE. Now Strigi is indexing and I can tag files, everything works. Some kind of configuration seems to have been wrong. I think I can figure this out.
edit02: I had to replace the .kde4/share/apps/nepomuk folder with a clean one, maybe something with the database or how it is accessed. Don't have time to go into this right now, I'm just happy it works now.
Last edited by V for Vivian (2010-06-30 08:16:11)

SCOM 2012 Network Monitoring Does Not Show Servers

We are testing out the network monitoring piece in SCOM 2012 but for some reason it never does show the servers. We have a test switch with a monitored server connected directly to it but after the discovery completes it doesn't show the server as
being connected. The switch in question is a Juniper and if you look at the diagram view for the device it does show all of the ports under "not monitored" and the Processor and Memory under "Healthy." The following event sequence shows up in the
"Network Discovery Progress Events" view:
Full Discovery Started for 1 request(s)
Proceeding to discover all systems in repository
Probing <<IP Address 1>>
Probing <<IP Address 2>>
Probing completed for <<IP Address 2>>
PostProcessing started
Probing completed for <<IP Address 1>>
PostProcessing completed
Switch::<<IP Address 2>> discovered successfully
Switch::<<IP Address 1>> discovered successfully
Discovery Completed / Devices discovered: 2 / Windows computers filtered: 0 / Devices in pending list: 0 / Devices excluded: 0
No devices were found in filtered list after discovery
Start processing connections to computers
Finished processing connections to computers. Number of connections made: 0
I've been trying to find some documentation on any other settings that are required to get network monitoring to work as advertised but so far I have struck out. Help!

Sorry Matt - you did say that very clearly in your previous post. I'll try and do better this time ;-)
From here:
http://technet.microsoft.com/en-us/library/hh212935.aspx
From here:
http://blogs.technet.com/b/momteam/archive/2011/09/20/what-gets-monitored-with-system-center-operations-manager-2012-network-monitoring.aspx
"An agent computer that is directly connected to a device will have the connecting interface added to this group. For this to work the management group must have the Windows Operating System management pack for the agent’s operating system, the Windows
Client Network Discovery management pack and the Windows Server Network Discovery management pack. The full discovery of the agent’s operating system has to be completed including the discovery of the agent’s network adapters. Then when network discovery
runs for the device it should stitch the port on the device to the network adapter on the computer and add the port to this group."
So possibly:
- check the management packs specified are imported
- check the the agents network adapters have been discovered
From here -
http://technet.microsoft.com/en-us/library/hh212935.aspx - it is also possible to do this for non-scom monitored servers.
"Ports that are connected to a computer are not monitored; only ports that connect to other network devices are monitored. You can monitor a port that is connected to a computer that is not agent-managed in the same management group by adding the port to
the Critical Network Adapters Group."
Cheers
Graham
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

How to use SCOM 2012 R2 Monitoring the standalone Windows Server

Greetings,
I want to use SCOM 2012 R2 to monitoring the standalone Windows Server that does not joined the domain. would you please guide me how to configure it.
Thanks
Frank@Hiweb 冯立超@瀚博资讯

I found the answer, as following:
http://pkjayan.wordpress.com/2010/05/17/agent-managed-non-trusted-servers-without-gateway/
and
http://blogs.technet.com/b/stefan_stranger/archive/2012/04/17/monitoring-non-domain-members-with-om-2012.aspx
Frank@Hiweb 冯立超@瀚博资讯

SCOM 2012 SP1 is failing to install - SQL not compatible

I'm getting an error when installing SCOM 2012 SP1 stating the SQL is not supported. I have seen a few posts on the forum about this error message but so far none of the resolutions resolved my issue.
Using named instance on port 2433. Entering SQL\instance and port 2433 yields same message as seen in another post:
"The installed version of SQL server is not supported. Verify that the computer and installed version of SQL Server meet the minimum requirements for installation. Please see the Supported Configurations document for further information."
I noticed I get this in my OpsMgrSetupWizard.log
[15:03:28]: Error: :StackTrace:   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at System.Management.ManagementScope.InitializeGuts(Object o)
   at System.Management.ManagementScope.Initialize()
   at System.Management.ManagementObjectSearcher.Initialize()
   at System.Management.ManagementObjectSearcher.Get()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[15:03:28]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
Notice the last line - IsSQLOnAValidComputer is null/empty. The solutions I found are to open the ports between these servers but the SQL server and SCOM server are on the same network - no firewall between them. The registry key for domain firewall
policy to 'EnableFirewall' is 0. The firewall service is disabled on both machines.
I am running the installation as a domain service account - for the DAA. It has local admin on the SQL and SCOM server. It has sysadmin DB access to the instance.
SCOM Server:
Server 2008 R2 Standard SP1
SQL Server:
Server 2008 R2 Enterprise SP1 | SQL 2012 RM 64-bit version 11.0.2100.60
Any help is greatly appreciated.

Glad to hear the issue has been resolved. Thanks for the update.
Niki Han
TechNet Community Support

Service not running logged an alert?

Hello,
There is a service on a Linux machine I don't want it to run.
I am getting an alert from SCOM:
Alert: SUSE Linux Enterprise Server 11 Process Klog Monitor Alert
Resolution state: New
Source: SUSE Linux Enterprise Server 11 (x86_64)
Path: Server
Last modified by: System
Last modified time: 4/21/2014 6:54:58 AM
Alert description: The KLOGD - Kernel Message Logging daemon on server Server is not running.
I could disable the alert for this service on this server Server but anyway to prevent the server Server to send this information. I know in Windows if the startup type is set to "Automatic" SCOM is looking for a service running, if the Startup
type is set to manual no check.
Do we have the same type of check in Linux?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Dom,
Doesn't work the same as Windows. Just override the monitor in the MP and disable it from monitoring the klog daemon.
Regards,
-Steve

Cisco NAC agent services not running on Windows XP

Hi,
I've problem with Cisco NAC agent services on Windows XP professional SP3.
After first installation using user local administrator, the services of Cisco NAC agent on windows machine running well, but after logout, and login using another user which is registered in domain users, the services of Cisco NAC agent is going to stopped (going to Manual mode not automatic, and the status is stopped).
This situation is not happened on all windows machines, several machines running well.
Cisco NAC agent version 4.9.0.42
Has anyone seen this type of problem?
Below i attached windows machine information from ones running well and not running, Thanks
Regards,
Rian

Hi thanks for your answers, dbconsole is started in services.msc and also Agent, but goes on to say that the agent is not running.
In sysman log shows this,
"03/20/2012 13:38:54,553 [MetricCollector: HOMETAB_THREAD600: 60] ERROR rt.DbMetricCollectorTarget _getAllData.328 - oracle.sysman.emSDK.emd.comm.CommException: Exception in sending Request :: null
oracle.sysman.emSDK.emd.comm.CommException: Exception in sending Request :: null
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_ (EMDClient.java: 1330)
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest (EMDClient.java: 1223)
at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics (EMDClient.java: 640)
at oracle.sysman.emo.perf.metric.rt.DbHomeTab._getAllData (DbHomeTab.java: 324)
at oracle.sysman.emo.perf.metric.rt.DbHomeTab.getData (DbHomeTab.java: 139)
at oracle.sysman.emo.perf.metric.eng.MetricCached.collectCachedData (MetricCached.java: 402)
at
at oracle.sysman.emo.perf.metric.eng.MetricCollectorThread.run (MetricCollectorThread.java: 320)
at java.lang.Thread.run (Thread.java: 595)
20/03/2012 22:00:03,335 [JobWorker 772: Thread-13] ERROR em.jobs executeCommand.161 - UpdateARUTables: Oracle MetaLink credentials are incorrect or missing. Click Patching Setup parameters required to September."
In event viewer shows this,
"Agent process exited abnormally DURING initialization." but this message appears a few hours after having started the service.
I am using the Administrator account

Solaris 10 - print services not running

Hi
One of our servers has just been upgraded from Solaris 9 to 10 but we are having problems getting the lp scheduler to start. We have tried starting the service manually by issuing *'svcadm -v enable application/print/server'* which returns '*svc:/application/print/server:default enabled.*' However when you issue the command '*lpstat -r*' it returns '*scheduler is not running*'. The next step I tried was typing '*svcs -a | grep print*' which returned the following:
online               16:34:09 svc:/application/print/ppd-cache-update:default
online               16:35:39 svc:/application/cde-printinfo:default
offline               16:34:45 svc:/application/print/rfc1179:default
offline               16:34:45 svc:/application/print/ipp-listener:default
maintenance    16:34:45 svc:/application/print/server:default
I then issued the command '*svcs -v -x*' which returned the following:
svc:/application/print/server:default (LP print server)
* State: maintenance since Wed Dec 17 16:34:45 2008*
Reason: Restarting too quickly.
* See: http://sun.com/msg/SMF-8000-L5*
* See: man -M /usr/share/man -s 1M lpsched*
* See: /var/svc/log/application-print-server:default.log*
Impact: 2 dependent services are not running:
* svc:/application/print/rfc1179:default*
* svc:/application/print/ipp-listener:default*
I tried enabling the 2 dependent services manually and it says they are enabled after you issue the command but in actual fact it is not doing anything. Our set up is complicated by the fact that we are not using Soalris as our print m,anager but are using Hewlett Packard's.
Any help would be greatly appreciated,
Bruce

This could be caused by print requests that were waiting in the print queue when the upgrade took place. You need to remove these requests as follows:
# svcadm disable print/server
# rm -fr /var/spool/lp/fifos /var/spool/lp/temp /var/spool/lp/tmp /var/spool/lp/requests
# svcadm enable print/server
# svcs -xv
The print scheduler should now be running and you should now be able to print.

Mailbox Server Role Services not running: MSExchangeDelivery

Running Exchange 2013 CU7 on Server 2012R2.
Ive been working on this project on and off for the last few months, as I am the only IT guy, and a new office construction at my company has had me running cable, moving offices, workstations, and phones.
This install of Exchange was working fine up until about a week ago. When I came back to finish its setup, I noticed that I was not able to send email internally anymore. Connecting to OWA says the message was sent, but it never arrives. After some more
investigation, it turns out the MSExchageDelivery service will not run.
Checking on this service, it indicates that it is starting/stopping, but never getting to the running stage. I have tried everything that I can think of, including uninstalling and re-installing the software. I have scoured the internet looking for solutions,
but not finding one that will take care of the problem.
Looking in the event viewer under Windows Logs -> Application I do see alot of information about MSExchangeTransportDelivery. Seems to be looping through a set of events....
1. Error MSExchangeTransportDelivery Failed to start listening (Error: 10048). Binding: 0.0.0.0:475
2. Error MSExchangeTransportDelivery This address is already in use. Binding: 0.0.0.0:475.
3. Error MSExchangeTransportDelivery Inbound direct trust authentication failed for certificate %1. The source IP address of the server that tried to authenticate to Microsfot Exchage is [%2]. Make sure EdgeSync is running properly.
4. Information MSExchangeTransportDelivery The service will be stopped. Reason TCP/IP socket error. The service will stop.
5. Information MSExchangeTransportDelivery A configuration update for Microsoft.Exchange.Transport.TransportServerConfiguration has successfully completed.
6. Information MSExchangeTransportDelivery A configuration update for Microsoft.Exchange.Data.Directory.SystemConfiguration.MailboxTransportServer has successfully completed.
7. Information MSExchangeTransportDelivery A configuration update for Microsoft.Exchange.Transport.X400AuthoritativeDomainTable has successfully completed.
8.Information MSExchangeTransportDelivery A configuration update for Microsoft.Exchange.Transport.AcceptedDomainTable has successfully completed.
9.Information MSExchangeTransportDelivery A configuration update for Microsoft.Exchange.Transport.ReceiveConnectorConfiguration has successfully completed.
10. Information MSExchangeTransportDelivery A configuration update for Microsoft.Exchange.Transport.RemoteDomainTable has successfully completed.
11.Information MSExchangeTransportDelivery A configuration update for Microsoft.Exchange.Transport.TransportSettingsConfiguration has successfully completed.
12.Information MSExchangeTransportDelivery We are doing a full mailbox database reload as part of routing tables loading due to: First read.
Not sure where to go from here... any and all help is appreciated.

You're getting a tcp socket error and This address is already in use. Binding: 0.0.0.0:475.
Are you sure port 475 is not being used for some other service? Go to services and check if the
MSExchangeTransportDelivery is
currently stopped. If it is, open cmd and type netstat -ano and see if port 475 is showing up. If the MSExchangeTransportDelivery
is stopped it should not show up, if it is then it's being binded somewhere else and prob causing a conflict.
James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com
Thank you for your help. MSExchangeTransportDelivery was stopped. When I ran the netstat command, it shows:
TCP    0.0.0.0:475            0.0.0.0:0              LISTENING       1600
TCP    127.0.0.1:475          127.0.0.1:35056        ESTABLISHED     1600
TCP    127.0.0.1:475          127.0.0.1:35231        ESTABLISHED     1600
TCP    127.0.0.1:475          127.0.0.1:35386        ESTABLISHED     1600
TCP    127.0.0.1:475          127.0.0.1:35559        ESTABLISHED     1600
TCP    127.0.0.1:475          127.0.0.1:35657        ESTABLISHED     1600
UDP    0.0.0.0:475            *:*
1600
So we can see that 475 is indeed in use. I followed this up with Process Explorer to find out what process had PID 1600. Turns out that a security dongle we use for network licensing is using that port. I will be moving the dongle to another server, and
will follow up here when I have results.

Intel RST Service Not Running

PLEASE HELP
Since updating from Windows 8 to 8.1 I am experiencing performance degradation on my HP HPE-250f desktop PC (one HDD, NO RAID).
In the past (Win 7 & 8), when I would occasionally notice performance degradation, the Intel RST icon in the system tray would have a yellow triangle with an exclamation mark in front of it and if I would hover over it, it would say “Intel RST service is not running”. I would then reboot the PC and performance would return to normal.
Since updating to Win 8.1 everything stated in the previous paragraph is still true, except nothing changes after the reboot.
I’ve tried right clicking on the RST icon and then opening the IAStorUI program, but the message “IASrorUI has stopped working” flashes on the screen then disappears and nothing changes.
Any help solving my problem will be appreciated.

Hi,
Some versions of IRST have delayed startup. This improves the startup time to get the desktop displayed.
Try the lastest version of IRST.
I have never experienced an performance degradation due to a delayed IRST startup. However, your mileage my vary.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

SCOM 2012 Linux Monitoring - RPCBIND, RPCIDMAP, RPCSTAT services not running

Similar Messages

Maybe you are looking for