SCOM services password required to retype everytime restart the services

Hi,
Everytime i restart the server center configuration service and system center data access service. It will failed to restart and prompt out password error message.
I need to retype the same password and hit Apply then it will prompted with a dialog box that says the account was granted 'log on as a service' rights then only i can start the services normally.
Both of the services are using domain ID.

That isn't normal, Check that services account right and if you apply any group policy on scom server.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Similar Messages

Any way to turn off password requirement on startup (without eliminating the password)?

I'm trying to help a friend with snow leopard. Her primary hard drive was recently replaced by apple and then restored from time machine. She's always had the same password but claims that she was never required to enter it for every startup as she is now. She'd like to turn off that requirement.
I don't want to change her password to none (or null), as I perceive that there may be problems when attempting to do software updates with a null password.
I've looked at system prefs > security, system prefs >accounts, and the keychain and haven't found a way to do this
Any ideas?
She's using a prior generation MacBook Air.
Pete

Hi Francine
Thanks very much for your answer. I've got it working now thanks to you.
Strangely, it WAS set that way all along.
But I tried the following:
- I turned OFF Auto Login for her account,
- Exited system preferences,
- Returned to Account Login Options,
- Turned ON Auto Login for her account, (again)
- Did a restart
And that seems to have done the trick. It appears that the restore from time machine, may have only partially restored that setting.
Thanks very much for your quick and accurate response
Pete

Can I disable the password requirement to download applications from the app store?

Recently, my Apple ID has become "locked" roughly twice a month for the last two months and it's been driving me insane. To try to remedy this issue, I finally changed my password -- after struggling to come up with a password that was "strong" I ended up with one that's more than 20 characters long and incredibly convoluted.
This brings me to this question: is there a way to disable the App Store requiring a password to download apps? It was already a nuisance, but it's going to be wholly worse now that my password is Biblical in length.
If there is an answer to either of these issues, that would be awesome! (Why does my Apple ID keep locking up twice a month when I type my password immaculately? Can I stop needing my password? I'm the only one using my iPhone).
Thank you so much!

Awesome. :|
Thank you!

HT1338 I am currently struggling to update OSX mountain lion to 10.8.4, I have installed the update, and it is telling me that a restart is required. When I restart the mac it is still showing that I have one update outstanding, and it is for 10.8.4. can

I am currently struggling to udate OSX mountain lion to 10.8.4, it constantly tells me that an update is available and a restart is required. Please could someone help?

Click here and download it.
(86298)

MBP 13in drops wifi when computer goes to sleep, I have to restart the computer to reconnect. Help?

I recently did the Lion update on my MBP. Since then my computer will drop wifi connection everytime the computer goes to sleep. It will not let me log on network saying invailed password. I have to restart the computer and then it connects automatically. This is NOT a router problem. Skip any and all advice about routers. I have 4 other Apple products all connected to wifi perfectly. This is a MBP issue. Please help.

On the MBP, go to /Library/Preferences/System Configuration
Move all the files in the System Configuration folder to the Trash.
Restart the Mac.
It will not let me log on network saying invailed password
Just in case, open Keychain Access located in /Applications/Utilities
Select Passwords on the left.
Use the search field top right corner of the window to locate your network keychain.
Now right or control click the keychain then click Get Info then select the Attributes tab.
Click: Show password
Make sure it's correct.
And launch AirPort Utility /Applications/Utilities
Select the connection on the left the click Manual Setup.
Select AirPort from the menu then select the Wireless tab.
Make sure the password is available there then click Update.

It is possible to speed up the 31410 (datawarehouse event) after restarted all the SCOM services for SCOM 2007R2

Hi,
Everytime, we restarted the SCOM services. It will took 50mins++ until event id 31410 is out then SCOM application will only start to pumping out alerts. anyway to speed it up?

Hi,
When you restart the SCOM services, please also try to restart Microsoft Monitoring Agent.
@echo off
echo Restarting System Center Management Configuration…
net stop cshost
net start cshost
echo Restarting HealthService…
net stop HealthService
net start HealthService
echo done!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is there a requirement to restart the JMS/Weblogc Server everytime when the DB goes down?

Question:
When the Database is shutdown gracefully everything was fine.
But when the Database is brought down with shutdown abort the MDB consumer will never consume messages from the topic again. And we need to restart the WebLogic Server in order to get the messages consumed again.
So is there a requirement to restart the JMS/Weblogc Server everytime when the DB goes down? If not, what type of failures will require the JMS/WLS restart?

On a DB failure, a WL JDBC store service will make a brief attempt to reconnect before shutting itself down along with any services that depend on the store.
It isn't necessary to restart the entire WebLogic Server JVM to bring the affected service(s) back if you can use the Automatic Service Migration feature. ASM can automatically restart a failed service on a different WL Server in the same cluster, and/or can try a restart-in-place for the service if the service's original host WL Server JVM is still running. The Automatic Service Migration (pdf) white-paper has a thorough discussion of this area.
In addition to ASM, there's also a "whole server migration" option that can automatically restart or migrate an entire WL server.
Tom

Trying to install new printer. can't password required.. tried everything how can i restore or restart my computer

can't install my new printer. password required.. don't know it my son set up computer and he can't even remember doing a password. tried tech support. that didn't work. if you can't help i have to take this computer to geek squad. help…. can i restart or reset my computer

Hi-
Welcome to Discussions!
the guy says it needs a low level format?
That's not within the realm of the end user.
Low level formatting is done at the factory.
If the drive can't be erased, return it. Something is wrong.

"The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook" in Exchange 2013

In Exchange 2013, Outlook finds a new connection point made up of the user’s mailbox GUID + @ + the domain portion of the user’s primary SMTP address. This change makes
it much less likely that users will see the dreaded message “Your administrator has made a change to your mailbox.”
http://technet.microsoft.com/en-us/library/dd298114(v=exchg.150).aspx
Although the error message in the topic has been already improved a lot in Exchange 2013, the users may still encounter them in some specific scenarios. We have collected them and let’s discuss them in this thread.
Symptom
=======================================
Consider the following scenario:
Exchange 2013 was installed for a migration from Exchange 2007/2010.
The legacy Exchange server is removed after successful migration.
Exchange 2013 may be updated to Exchange 2013 SP1.
Some users were being randomly prompted with a popup in their outlook client with the following message when connecting with Exchange 2013 server:
“The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook”
Cause
=======================================
The issue may be caused due to Public Folders.
The msExchHomePublicMDB attribute on Exchange 2013 databases was set to deleted legacy public folder object.
Solution
=======================================
Removed the Public Folder from all the Exchange
2013 Databases. To do it, we can use ADSIedit.msc and remove the arrtibute - msExchHomePublicMDB from all the Databases:
1. Open ADSIEdit.
2. Connect to the Configuration container.3.
Expand Configuration, expand CN=Configuration,DC=Domain,DC=com.4. Expand CN=Services -> CN=Microsoft Exchange -> CN=Domain -> CN=Administrative Groups -> CN=Exchange
Administrative Group -> CN=Databases.5. In the right hand pane you will see a list of databases.6.
Right-click the listed database object -> Properties.7. Check whether the msExchHomePublicMDB value is set to an unavailable value. If you see reference to the old database,
please clear the value.8. Click OK.9. Check the rest of the databases to make sure
that they are not populated in the same way.
References:
https://social.technet.microsoft.com/Forums/en-US/2f736bdd-1c00-4a22-97a5-95faeadf1495/exchange-2013-sp1-users-randomly-prompted-with-the-microsoft-exchange-administrator-has-made-a?forum=exchange2010
https://social.technet.microsoft.com/Forums/lync/en-US/7a7b3cf8-8761-421c-9d55-6c84e05531c0/the-administrator-has-made-a-change?forum=exchangesvrclients
https://social.technet.microsoft.com/Forums/en-US/0d71c843-b662-493c-ab6e-30708929ef18/2013-sp1-problem-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and?forum=exchangesvrdeploy
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

This one? http://support.microsoft.com/kb/2934750

Exchange 2013 SP1 users randomly prompted with "The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook"

I got a call to check an issue with a Exchange Server 2013 SP1 environment recently. All server was upgraded from Exchange server 2013 CU2 to Exchange Server 2013 SP1. It was done successfully but many users were being randomly prompted with a popup in their outlook
client with the following message:-
“The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook”
Although there wasn’t any changes of late in the environment there were random popups like these for multiple users. As the behaviour was not consistent and effecting the entire upgration population
Please suggest us how to resolve the issue.
Regards, Md Ehteshamuddin Khan All the opinions expressed here is mine. This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

Hi,
Does the issue happen to all Outlook 2013 users? Please create a new Outlook profile to have a try.
If it fails, please check the msExchHomePublicMDB value in ADSI Edit:
1. In Adsiedit, expand Configuration-->CN=Services -> CN=Microsoft Exchange -> CN=domain -> CN=Administrative Groups -> CN=Exchange Administrative Group -> CN=Databases.
2. Right-click the listed database > Properties.
3. Check whether the msExchHomePublicMDB value is set to an available value. Please change the value to <not set>.
4. Click OK.
Then check whether the issue persists.
Thanks,
Winnie Liang
TechNet Community Support

After restarting the Services, Foundation service is not starting

Hi All,
Recently, i have applied patch and restarted the services, later found that foundation services is not starting. I have referred the logs and it showing below error.
<Apr 29, 2015 7:45:30 PM PDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-x86_64 from Oracle Corporation>
<Apr 29, 2015 7:45:31 PM PDT> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}9e8e9w8ADkG/3Hx33gkE9Ukm29IxHIISKLeLw/FYfxTO0GcnA= from the file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException.>
Enter username to boot WebLogic server:
I have logged to Weblogic server and checked, the foundation service is not started.
We dont have the backup of installation folder.
I manually edited the user name and password and started the services, but no luck.
Do any one idea about processBootProperties.cmd, shall i trigger it to get the new boot.properties.
Please suggest.
Thanks

Hi all,
I manually enter the credential for the Web logic server and started the services. It worked out.
I did the same first, but i did some typo error in credential, it killed me for more that 1 hour... ):
Thanks

User name and password required to access Security settings

I have an HP5520e all in one printer. I am trying to set it to scan to my computer. The instructions say I should activate Webscan from the Administrator Options under Settings and Security. When I try to get to Administrator settings I am being asked for a user name and password. What username and password am I supposed to enter here?
This question was solved.
View Solution.

gnomad899,
Welcome to the HP Forum.
Start with the standard:
admin = admin
password = password (or leave it blank)
This assumes, of course, you have not used EWS (embedded web server) and set a password for it previously -- which you CAN do while using EWS. Once you do set a password using the EWS page, everytime you want to look at certain settings, adjust certain settings, you have to enter the password you set up.
EWS is simply the web page interface to the printer -- like you use a web page to talk to your router software. Same thing - sort of, except you type in the printer IP on your browser instead of the router, of course.
============================================================================
If it won't let you in,
You can try resetting the printer. Be Aware that should you do this, you have to re enter any previously entered information (wireless settings, etc.).
You might be able to reset the printer on the front panel - settings > factory defaults (or similar).
OR
from TroubleShooting > Solve a Problem > Printer Does Not Maintain Wireless Connection
Step four: Reset the printer and wireless router, and then restart the computerFollow these steps to reset your printer and your wireless router, and then restart your computer.
NOTE:Consider bookmarking this page on your web browser so that you can reference it after restarting the computer.
Follow these steps to reset your printer, your wireless router, and your computer.
Press the Power button on the printer to turn it off.
Disconnect the power cord from the rear of the printer.
Disconnect the power cord from the wireless router.
Turn off the computer.
Wait 30 seconds.
Reconnect the power cord to the wireless router.
Wait 30 seconds, or until the router is fully on and ready.
Turn the computer back on.
Wait for the computer to reload.
Reconnect the power cord to the rear of the printer.
Turn the printer back on.
===========================================================================
Reference:
HP 5520 e All in One Printer
User Guide
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Admin password required for stopped queue

I am running 10.5.4 iMac G5 clients and 10.5.5 servers at my schools. We use mostly GCC 12 series laser printers with a few HP models of varying vintages thrown in. My users are experiencing frequent pauses or stops of their print queues. They are unable to restart the queues themselves, I must go in with my admin password to restart their queues. I've been told this is not a bug but a purposeful function of the OS. Is this true? Also, is there any way around it? I am going crazy just trying to keep up with all the print queues that need to be reset every day! Also, any idea what is causing printers to stall on even simple jobs? It seems to be happening far more often than it used to on my old 10.3 clients, even on simple Appleworks documents.

I found a possible solution at the macosxhints, haven't tried it yet as only one of my Macs is on 10.5.5 so far. I'll post back if it works, though a few posts have been made to that solution with success so far.
http://www.macosxhints.com/article.php?story=20081107092520601
Here's the text from the link:
Mac OS X 10.5 requires you to enter an administrator's password to pause/resume a print queue, where no previous version of OS X has done so. This is extremely annoying in a lab setting -- if there's a paper jam or something, the queues on all the computers need to be restarted by an administrator, instead of the user just clicking Resume. I haven't seen a solution to this elsewhere, so here's what I came up with:
1. As root, or in a Terminal session with su privileges, edit /etc/cups/cupsd.conf.
2. Find this section:
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Res
tart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @AUTHKEY(system.print.admin) @admin @lpadmin
Order deny,allow
</Limit>
3. Remove the items you don't want limited: Pause-Printer, Resume-Printer, Pause-Printer-After-Current-Job, etc.
4. Save the file, quit the editor, and restart your computer.
After restarting, you should be able to pause/resume the print queue as any user. Hope this helps, it was annoying the heck out of me.

Facing an error while restarting the services : Process Manager is not initialized.

while setting up the MDM environment I somehow messed up all the database connections.
Now im unable to start or stop the services properly.
Below is the error shown in the event viewer log for process MDM Ntier Process manager :
The description for Event ID ( 3 ) in Source ( MDM NTier Process Manager ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Exception Emdm_Exception with message 'Process Manager is not initialized.'.
Kindly help
I suspect this is because incorrect password for Engine login MDM_SYSTEM or incorrect configuration file (config.xml), However i may be wrong.

As far as the "Process Manager is not initialized" error is concerned, we got the same error recently.
What we did was restart the DRM services on the server - The N-Tier Client and the Web-Publisher.
However, after doing it - we still got the error or DRM would not respond. On looking through it again, we saw that the Task Manager on the Server did not kill the DRM processes and so we did it manually. Then we restarted the services and it worked fine this time. See if this works for you - first kill all the services on the client sides and then on the server side, check for the client and server side process task manager and then restart the service. This worked for us, hopefully it works for you too.
-- Adi

How to disable/remove password requirement every time you send amessage

Every time I try to send an email, I get a box requiring me to type in a password (the one associated w/my ISP provider account). I can't find a way to turn off. My daughter uses Thunderbird & does not have this problem. She has a desktop pc & I am using a laptop, but I wouldn't think that would make a difference? This is so annoying and I couldn't find an answer any where in HELP or online support. My daughter set Thunderbird up for me & can't figure out why this is happening or how to make it so I don't have to do this. Please help & provide me w/a solution. THANKS!

There is no check box with, at or near the password requirement. It is the same password used to access my server (comcast.net). I have asked comcast.net and they told me it is a Mozilla Thunderbird problem, and they have no control over it, so can't fix the problem - CALL THUNDERBIRD!
But Thunderbird doesn't have any customer service. The problem only began when I had to change my comcast.net password (and no, the old one doesn't work either now).

SCOM services password required to retype everytime restart the services

Similar Messages

Maybe you are looking for