Scrapping assets into stock and sales

Dear Experts,
our business scenario is like the user scrap the assets and scraped material is taken into stock and sold ,please advise me how to map the scenario.
Regards,
Varun
Edited by: Jeyakanthan A on Oct 8, 2011 11:22 PM

if, u want to use ur this business process with CIN then follow these steps:
    maintain chapter id for ur material with material type should be RG1.
            Do MB1A with 551 mvt type.
then do J1is AND j1iv.
then need the updating of Excise Register here J1i5
          U can use here j2iun instead of j1i5)
if u are new to J2iun then do like this carefully,
                      display pending invoice in j2iun.
                        then one by one excise value put.(it will *** in green, then save this)
                        then extraction of register and printing.
Thanks

Similar Messages

Displaying stock and sales orders for aggregated product in Product View

Hello,
We have successfully created an SNP aggregated planning scenario which uses CTM to plan purchase requisitions and planned orders at the aggregated product level. The disaggregation to the sub-product level is working as well.
We have one issue.
We would like to be able to use the Product View (SAPAPO/RRP3) to view the sales order and stock information for both the aggregated products and the sub-products.
Currently, the sub-products (which are the materials in the stock and sales orders functions in ECC) show the disaggregated planned orders and purchase Reqs, and the sales order and stock information in the Product View.
The aggregated-products (which aren't included in the ECC sales order and stock functions), only show the aggregated planned orders and purchase Reqs.
Is there a Product View configuration which will show the aggregated stock and sales orders in the aggregated product view?
thanks in advance for any comments and/or assistance.
Sarah

Hi Sarah,
The Product view configuration is available under customisation menu under the below path.
spro > sap guide > APO > supply planning > PPDS > settings for order view/product view
Under this, you can configure your customised product view structure.
Regards,
R. Senthil mareeswaran.

Single report showing stock and sale prices

Dear SD Wizards.
Am seeking to know if any standard report exists which would show me a the existing stock alongwith the valid selling price maintained for the item.
I do understand it's from two different areas and such instances are best through developed reports, but just trying and learning to know if there exists some report for this. This is a useflu info for the sales team, as most of you all would agree.
Thanks and regards,
Tariq

Sales price for material you can get from Tcode V/LD with pricing report as 15 - Material Price.
But you will not get current stock overview with it.
And yes, your understanding is correct. You might need to develop a Z report for the same.
Regards
JP

Prod. order and sales order order link-MTS sceanrio

Hi dudes,
My client is using both MTO and MTS scenarios,
to customize a report in costing they want link between production order and sales order. Its readily available in MTO sceanrio but in in Make-to-Stock scenario how to get this link.
Please if any enhancement or some other way to get it..
thanks in advance...
Robert.

Robert,
I will assume that you have already informed your client that this report is nonsense (Make to Stock by definition cannot be linked reliably to a Sales order). Oh well, the client is always right!
Make sure you include in your solution
1. How does he want to account for the business scenario where one production order ends up supporting more than one sales doc (and yes, it will happen).
2. How does he want to account for the business scenario where a production order is received to support Safety Stock (might not happen if he doesn't use SS)
3. How does he want to account for the business scenario where a production order is received to support a forecast, but there is not yet any sales doc (might not happen if he doesn't use forecasting)?
4. How does he want to account for the business scenario where the production order is received into stock, and the sales department decides to use the stock for a different sales order?
Item 4 would only be an issue if the report is run prior to the sales order being shipped.
Regards,
DB49

Stock ans sale order stock

Dear All,
What is difference b/w stock and sale order stock.and what is its impact if i use strategy 40.and what is the movement type to transfer stock to sale order stock

What is B/W stock?
Strategy 40: Planning with Final assembly.
When you plan the sales order, MRP create receipts and when you do the GR, the stock will posted to to Unrestricted stock. PGI for the Sales order deliveruy is done from the Unrestricted stock. which can be used by any sales order.
The Movement type to transfer the Stock from Unrestricted to sales order stock is 411E.
if you use 20 or 50 startegy depedning on your requirement, the stock directly is posted to the Sales order stock, which cannot be consumed by any other sales order.
Regards
Ratan

Check Credit and Stock on Sale Order

Hi All
Could you please tell me how to check Credit and Stock on Sale Order.
Thank and Best Regard
Thang

How To Do Configuration For Credit Management
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored.   This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors
Regards
Raja
Edited by: ramanathan raja on Jul 25, 2008 4:37 PM

Using Consignment Stock and filling up an unrelated Sales Order

Hi there,
Apologies if this has been covered elsewhere, but I have an issue that I hoped SCN may be able to resolve.
We have a client for whom we hold Stock in our warehouse location. We fill up this stock using SAP Sales Orders (at 0 revenue) to maintain levels to satisfy need.
When the client puts in a stock request, they do so using our front end quoting engine which is integrated with SAP, and effectively drives the client invoice. This sends through picking and shipping requests to our warehouse who immediately action the stock holding to satisfy the request, creating Outbounds against the stocking order(s).
At a later stage the quoting engine creates a Sales Quotation in SAP which is then converted to a Sales Order. In order to reconcile the Order and the shipments, the Stock Order Outbounds are then reversed, and re-issued against this new (unrelated) Sales Order, and then we can move to invoice.
Step by Step, the process broadly looks as follows:
- Order Stock via 'Sales Order (1)'
- Pick and Deliver Stock (Outbounds are created against Stock 'Sales Order (1)')
- Process the client request and create 'Invoice Sales Order (2)'
- Reverse the Outbounds against Stock 'Sales Order (1)' and link these to 'Invoice Sales Order (2)'.
- Process to Invoice.
I am trying to determine if there is a more efficient means of processing this requirement, and whether consignment stock can help us here. From what I have read, I am assuming that for consignment stock a saleable YKE can only be created against an existing YKB. For the model that we are trying to operate, ideally we need a solution where we can Associate the YKB items to YOR, or perhaps achieve the following:
- Order Stock via 'Sales Order (1)'
- Move this Stock into a "Bucket"
- Pick and Delivery this stock out of the "Bucket"
- Transfer the delivery over to the 'Invoice Sales Order (2)' when required.
I'd welcome any suggestions here to helps us optimise the process.
Many thanks,
Alexander.

Hi Alexander ,
Yes ofcourse you can use consignmentment Process
and you can use the concept of special stock partner in the partner profile
Spoecial stock partner (SB) can assign to your ship to party
1stly you can do consignment fill up( with your customer name (ex-2316)
then at the time of creating the consignment issue parter function use 2361 customer
Regards
Ramesh

Opening and closing stock with sales order and with out sales order

hello,
any body please help me my client want to check opening stock and and closing stock in areport.
material contains batch and some material with sales order and some are with out sales order. my client is asking this in a single layout. please tell me isthere any teport or bapi or function module to get this report.
this is very uregent. and layout is requesting like opening stock, production stock, sales stock and closing stock.
please guide me to get this report.
Thanks & Regads
Bhakta

Transaction MB5B
For sales order related use specila stock as E and use radio button indicator in stock type
For stock w/o sales order, use special stock indiactor as "space' and stock type valuated stock.
to get a perticular month,opening stock/closing stock enter the start date/end date as month start and end date.
See the o/p which will give the stock as required by you

Sale order wise stock and Issuance of external procurement material.

Transaction : ME21N and MIGO
Dear SDNites,
When i make a account assigned PO(with ref to sale order), then material comes and goes directly for consumption.
I want that when the material comes after 105 movt., it should go to un-restricted stock and i can see in mmbe(or any other transaction) how much qty. has come against
which sale order, so that i can issue material also sale order wise by movement 231
Pls. help as to how to go about it.
Rgds.,                                                    Parag                                                     09815999582.

Hi,
When you are trying to create PO with reference to SO what is the item category used in SO, Use item category as "TAB" then SO will generate a Purchase Requisition. Convert this Purchase requisition in to Purchase Order, account assignment will be copied as "E Individual Customer stock" Sales order and Cost element will populate from PR.
When you post the GR for above PO, the stock is managed as Special Stock indicator "E" sales order stock, in MMBE also it displays as SO stock.At the time of GR value is booked to SO and stock will be shown in MMBE.
This stock is reserve for particular SO against which you have procured, but you can transfer post the same from SO stock to your OWN stock
Hope this clarifies,
Thanks & Regards,
Sridhar

Moving Average Price for Sales stock and Project stock of a material

Hiya Gurus,
                 I am developing a report to display inventory details. My requirement is that I have to display the Moving average price of a material for all Valuation type. I also need to display the Moving average price if a material has got Project stock or Sales stock.
                 In MBEW table I can get the Valuation type and its Moving average price, but how can I find the moving average price for the same material if it has got Sales stock and project stock. Please let me know the table and field where I could get the relevant data.
                Kindly help me on this, it would be deeply appreciated.
Cheers,
ZIa

Hi
can you look at tables
EBEW                             Sales Order Stock Valuation
QBEW                             Project Stock Valuation
Nat

How to include Sales Office and Sales Group into FI report?

Hi,
I have a requirement to add Customer characteristics u201CSales Groupu201D and u201CSales Officeu201D into a FI report which is based on the InfoCube 0COOM_C02. The values that needs to be presented is actual data (Customer Master Data; NOT transactional value.
In the DataSource u201C0COORDER_ATTRu201D, fields Sales Organization and Sales Group are present and it is brought to BW from R3. But I am not able to find the way to get the field Sales Office into SAP BW.
I checked the extraction program for the DataSource u201C0COORDER_ATTRu201D, the fields Sales Org and Sales Group are coming from a table u201CCE41000u201D but in this particular table there is no Sales Office present.
So can anyone guide me out in getting the Sales Office to the DataSource u201C0COORDER_ATTRu201D, or is there any way of getting it in BW directly by reading some Master Data table.
Thanks in advance
Prasapbi

Hi Sangeeta,
As per your statement, my understanding is that the Organization Attributes are not maintained in the Customization. If all the values are properly maintained then based on the Organization Data determination, the system would have picked up the data. You can first check the Organization Structure and see all the attributes are properly maintained or not and then check whether the Object Permitted in determination checkbox is checked. Then create a Transaction and see that all the Organization data are getting filled properly.
Have a look at the following link for a complete guide to the Organization data determination customization.
http://help.sap.com/saphelp_crm70/helpdata/en/6d/5c1738453fde16e10000009b38f8cf/frameset.htm
If the Organization data customization is not meeting your requirements then you can have a second look at the development approach. Then we can have a look at the available Objects to get the desired functionality.
Hope this helps.
Thanks,
Samantak.

GR into 'blocked stock' and GR into ' Goods receipt blocked stock'

Hellow!
I am to implement 2 scenarios
1. "GR into Goods receipt blocked stock"
2. 'GR into Blocked stock'
We use GR via shipment (movement type 101 , stock category ' ' ).
1 . I have tried to change stock category in delibery but fiels is locked. How could I set 'S' category for blocked stock to recive in 'Blocked stock'
2. How could I recive into ' Goods receipt blocked stock'?
Thank you for answers.
Andrey Garshin.

Hi Andrey,
I think the only way to do GR to GR blocked stock is in the GR confirmation from WMS (IDoc SHP_IBDLV_CONFIRM_DECENTRAL if you use DWMS, IDoc MBGMCR or WMMBXY if you don't use DWMS). Assign the movement type (BWART) = 103 in the IDoc. Please note that the stock type would better to be coordinated between the WMS and SAP, i.e. it is the WMS that shall say "I received the goods into the GR blocked stock" and only in such case you will map it into mvt type 103 in SAP.
For the normal blocked stock, I would suggest you to try setting this in the PO, tab "Delivery". Do it before you create the inb. delivery and see if it helps. If not, then you have the same option as for the GR blocked stock, set the stock type to S in the incoming IDoc.
BR
Raf

Make to order and sales from stock

Hi,
What are the important differences between make to order and sales from stock?
Thanks

Dear Yves,
Make-to-order
A type of production in which a product is manufactured for a particular customer.
Includes both sales order production and engineer-to-order.
Make-to-stock
An inventory of goods that were not manufactured for specific sales orders or projects.
I hope it will clear for you,
Regards,
Murali.

Subcontracting for Sales Order Stock and collective Transfer Posting

Dear Expert,
We have a scenario in subcontracting wherein the sales order the customer also wants to see the components and as such along with the Header item of subcontracting ,we also mention the components as another line item in the sane Sales Order.
Now from the sale sorder two Po's are created onr for the subcontractor and one for the compnens to be procured.
Since the components are procured on sales order stock there is noway we can issue it to the Vendor stock through Movt .Type 541.
As per SAP AG WE CAN:
"ubcontracting is also possible in conjunction with sales order stocks and project stocks. The subcontracting orders are account-assigned to a sales order or a WBS element. Thus, the components are not transferred (using a transfer posting) to the u201Cstock of material provided to vendoru201D but are directly withdrawn from the sales order stock or the project stock at the time of the goods receipt. The material manufactured is also posted to the sales order stock or to the project stock. The cost of subcontracting is then debited to the sales order or WBS element.Since the components are not transferred to the u201Cstock of material provided to vendoru201D, we recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor.This information is particularly important when you carry out a physical inventory of the sales order stocks and project stocks."
But my query is that how many such storage locations will be created for the subcontracting vendors.
Secondly for the stock transfer from sales to storage location , we have lots of sales order, is dera way through which we can do bulk transfer rathar than clicking at new item everytime and then doing the transfer posting.
your expert advice shallbe helpful in resolving a longtime pending issue , waiting for the response.
Regards
Jabeen

This is a known issue, the system doesnt allow stock to have two special stock statuses at the same time.
Your concern of having to make multiple storage locations is valid (since this is a configuration).
I suggest you do the following
- Configure a warehouse and a single storage type (say 001). Allow mixing of materials in a single bin
- Assign this warehouse to a new storage location.
- Create a bin for every sales order number in the warehouse.
- When goods are moved to subcontractor, perform a transfer posting to the storage location, and perform a putaway to the respective bin. The putaway strategy can be tweaked using a user exit to go to the relevant bin. This way you do not have to enter the WM transaction for putaway.
- To consume the stocks, you can use 231E movement (MB1A). On the WM side, the picking strategy can be enhanced so that the picking TO is generated with the correct source bin. Make sure the GL account and CO objects are as per FICO requirements.
This way you can track the stocks binwise (bin level reports are available in WM), perform physical inventory and also consume the stocks from the relevant bin automatically.
We had faced the same situation, and we ended up not having sales order stock at all.
Hope this helps.
Regards,
Aroop

Replication of Sales Office and SAles group into CRM from ECC6

Hi All,
recently I added the sales group and sales office into and existing sales are in ECC6.
1. how can I replicate that sales group and sales office replicate into CRM and Assign to the same sales area
2, how can replicate a new sales area into CRM?
3. do I need to do something in Org structure..?
thanks,
Ken

Hello Ken,
You can download new sales office & sales group using Transaction code CRMC_R3_ORG_GENERATE.
After executing this transaction you can see new sales office & sales group structure.
You have to select this new sales office & group rows & generate structure. After that you have to save. While saving you can give the earlier CRM Sales Organization unit.
You can see new sales office & sles group under earlier sales organization in PPOMA_CRM.
Best Regards,
Rajendra Sonawane

Scrapping assets into stock and sales

Similar Messages

Maybe you are looking for