Screen changes are not active in production tenent

Hi Experts,
I realized the transport of a solution to the production environment and as can be seen in the attached image the solution has been successfully activated.
The scripts "OnSave", "AfterModify", etc for example are up and running in the production environment, but all the changes that were made on screen are not displayed to users.
Does anyone know how to make the screen changes available to users?
Best regards.

Hello Felipe,
What tool did you use to "make changes on screens"?
UI Designer started from SDK?
Adaption mode in UI?
Bye,
   Horst

Similar Messages

  • 0CML_DELTA : Change pointers are not active

    Hi All,
    I have successfully did the delta init without data transfer for datasource 0CML_DELTA and 0CML_DELTA_CAP. Now, While trying to load delta, I am getting an error "Change pointers are not active" for both the datasource 0CML_DELTA and 0CML_DELTA_CAP.
    The position datasources are fecthing 0 records.
    I have activated the change pointers in BD61, even though I am getting the same error.
    Anyone faced the similar issue or have any clue about the problem.
    Thanks in advance,
    Pravender
    Edited by: Pravender on Sep 30, 2010 11:09 AM

    I resolved it. I was activating change pointers in BD61. But fot CML we need to activate in SPRO--> SAP Banking --> Loans Management --> Basic settings --> Installation parameters ---> Define general installation parameters.
    Then it will work.
    Pravender

  • Recent Workflow Version not active in Production server

    Hi Gurus,
    Recently, I made a  minor change to an existing workflow. After the changes, it was transported to QA and Production. In QA, the changes are reflected and when I click on the version overview tab of the workflow, I can see that my last changed version is the active version. But, In production server the last version is  not active. The previous version before my changes remains as the active version. Though it shows my version their, it is not active and the change are not yet reflected.
    To solve this I tried following ways,
    1)  I refreshed the buffer in SWU_OBUF in Production, but no improvements.
    2) Then I tried to check, if there could be any errors when I activate the workflow in Development server. But, there are no errors except few warnings like some of the variables declared for the workflow but not used. So, this also does not help.
    3) Then I tried changing the workflow to tag it again to a transport request thinking in a way, previously there might be a problem in attaching the active object. But, even after transporting the second changes, the workflow version is still not active in Production. But, it is active in QA.
    Please let me know, if I can try any other ways which is not mentioned above!
    Thanks a million.
    AM

    Hello,
    Check the transport logs for any errors and make sure all the transports have been done, and in the right order.
    What was the minor change that you made?
    You can get situations like this when you eg create a task, don't transport the task, and then add the task to a workflow and transport the workflow. In Development all will be fine, but not so in QA and/or Production.
    regards
    Paultje Bakker
    Hanabi Technology

  • Material delta changes are not flowing into CRM

    Dear All,
    material delta changes are not flowing into CRM, because the product hierarchy on material has been changed to a new product hierarchy. I do not want to download again the object DNL_CUST_PROD1 because it maight cause inconstancies in CRM. (I have already defined some z product hierarchies in CRM)
    Do I need to create the new product hierarchy also in CRM manually?
    Appreciate any inputs
    Raj

    Hi Raj,
    Use the transacrion R3AR2 to create a z object for DNL_CUST_PROD1 and assign DNL_CUST_PROD1 as the object name
    Then in request detail screen for new z object enter the details like table name (T179 in your case) and the name of the product hierarchy that you want to bring in. Save the transaction
    Then use the transaction R3AR4 to initiate the download for your new z object as you normally do in R3AS.
    Then go to SMW01 and reprosess the struck Bdoc.
    Reward points if helps,
    Regards,
    Paul Kondaveeti

  • RSSM: Checks Authorization Objects for Infoprovider are not activ

    Hello,
    we have BW 3.5 and we use RSSM Authorization Objects.
    When we create a new cube with an Infoobject that is authorization relevant, in our development-system in rssm the flags for the checks are automatically activ.
    When we transport the new cube to our production-system, the flags in RSSM for the authorization object are not activ.
    Sometimes the new infoprovider is not in the list of the infoprovider in rssm, so we have to "update check status" with the appropriate icon.
    My question:
    It is possible, that when we import the new cube in our production-system, that all authorization objects are activ??

    Hi,
    Normally system would check all the authorization relevant objects whenever a new Info cube is imported and in case if you want to transport these changes to Production system manually then follow the below listed steps:
    1) In Development system, check or un-check the authorization relevancy using the transaction RSSM on a given Info provider
    2) These changes are stored in table RSSTOBJDIR
    3) Create a manuall transport request and include these entries covering the required Authorization objects manually. 
    R3TR TABU RSSTOBJDIR
    Ex: If Info object 'A' is authorization relevant in Development system but not in Production system and you want to transport this change to Production system then include object 'A' table entries manually.
    Hope this helps.
    Cheers
    Bala Koppuravuri

  • Cant use colours in AI free version.stroke and fill options are not active either

    cant use colours in AI free version.stroke and fill options are not active either

    In the Trial version of Illustrator try this:
    In the top right of your screen, choose 'Essentials' from the workspace menu.
    Then from the same menu, choose Reset Essentials.
    Next, click the Selection tool in the Tools panel (strip on the left side of your screen, it is the black pointer at the top).
    Click on the object you want to change the stroke and fill colour for. Does it display with little handles around it (this is called bounding box)? E.g. can you tell it is selected?
    You should see the Stroke and Fill options in the Control panel (top horizontal strip above your document), if the object you've selected is a path. But if for instance you selected as a placed photo, you won't see the Stroke and Fill options.
    If possible take a screenshot of what you are trying to do, and we can be of more help hopefully.

  • Termstore changes are not getting reflected in the list items in SharePoint 2010 farm environment

    Hi,
    I had created managed metadata with termstores from central admin. Then I had created one list in which added a column of type managed metadata using the managed metadata which I had created. And also added few list items to this list.
    The problem is that after updating a termstore the changes are not reflecting in the list items which were added before the update.
    I have referred the following links:
    http://www.paulgrimley.com/2011/02/managed-metadata-changes-not-applied-to.html
    http://davidfrette.wordpress.com/2010/05/26/taxonomy-update-scheduler%C2%A0timer%C2%A0job/
    According to the links we need to run Taxonomy Update Scheduler on the server for updated termstore to get reflected. After running
    this scheduler on development environment changes are getting reflected but not working on the production environment.
    Kindly help!
    Regards, Shruti

    You should check the obvious.  You made the change in dev, but did you make the change in production too?  And, is the term you updated, actually the one that you are looking at in the list item?
    There is not much, if anything, that can go wrong with that timer job. so I'd guess that the term you are looking at is not the one you think you are updating.
    If you have double checked everything (the term is is in fact the same term id), then you may have something erroring in the update process.  In this case, you should check the ULS logs for any errors.
    Chris
    Chris Givens CEO, Architecting Connected Systems
    Blog Twitter

  • HT3149 iPhoto 09 When I click on the preview pane to move a photo into edit, it shows up black and the edit buttons are not active.  How do I fix that?

    When I click on the preview pane to move a photo into the edit pane, there is no image just a black square and the edit buttons are not active. A few images in an event will move to the edit pane but most will not.  I cannot work with those images that do not enter the edit pane..no attaching to email, make a card, slideshow, etc.

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Limit PO price changes are not replicated to ECC backend

    Hi all,
    SRM 5.0 ECS SP13.
    When I change the value(increase/decrease) in limt PO which is already created(PO is changed for first time) and order the PO,under Overview screen.,the PO total value(at header level) shows the correct changed /new value while at the Item level,the Net price is shown as the old value!However when I go and check the item details,the  field "VALUE" and "EXPECTED VALUE" have the changed/new value.
    Because of the above issue,the PO changes are not replicated to ECC backend system.When I tested the BAPI BAPI_PO_CHANGE1 with the test data,there is no error mesasge in ECC backend system.
    After this,when I change the PO for second time(again value increase/descrease),the total value and net price is shown correctly in SRM and changes are also replicated to ECC backend system!
    I have also checked the cong for SPOOLPARAMETERS under Set Control Parameters and eveything is set correctly as shown below
    SPOOL_JOB_USER     User that execueds spool job.     CUA_ADMIN
    SPOOL_LEAD_INTERVAL     intervall by which the retrytime incr.     60
    SPOOL_MAX_RETRY     Max. number of retrys for writing BAPIS     10
    Can someone throw some pointers how to resolve the above issue.
    Thanks in advance.

    Hi
    can you recreate the same issue
    are you saying that
    1. create a limit po for 100 USD and replicated to ECC AS 100 USD total value.
    2 . now update the PO in SRM 150 USD and it was not replicated to ECC ?
    or
    1. limit sc
    2. Limit PO
    3. update not reached ECC.
    Note 1284361 - Limits not transferred to backend purchase order
    Symptom
    Extended classic scenario.
    You have ordered a purchase order with more than one hierarchy item containing a limit.The purchase order is created or updated in the backend system without errors but the limits are missing in the backend purchase order.

  • Why changes are not visible in alternate profit center heirarchy?

    Hi
    I did changes in the master data of profit center. I chaged the profit center group in the masterdata of profit center & the same change is visible in the standard heirachy but the changes are not visible in the alternative heirarchy.
    I think it should visible as I did changes in the master data.
    I just want to know why it is like so or there is some other way to change the master data.
    I know i can drag the profit center as well in t code KCH9 or KCH 2.
    After doing so i activated the same.
    Waiting for sugestions, comments.
    Edited by: Smruti Mohanty on Nov 13, 2008 1:47 PM
    Edited by: Smruti Mohanty on Nov 13, 2008 1:47 PM
    Edited by: Smruti Mohanty on Nov 13, 2008 2:03 PM
    Edited by: Smruti Mohanty on Nov 13, 2008 3:02 PM

    Hi,
    If your are using same profit center group(which is used in standard hierarchy) in alternate hierarchy,you will see change.
    if your using different groups in Standard hierarchy and Alternate hierarchy you will not see change in alternate hierarchy.
    hope this helps you.
    Thanks,
    Rau

  • Changes are not refreshing at runtime

    hi friend,i made some changes in the mapping Object in system A and then transported the changes to System B.
    in system B ...transported objects are activated and it shows activated in history of transport objects....up to here everything going fine.
    but in runtime....the changes are not getting reflected.....
    can u tell the reasons where it fails and how to solve this issue.....
    Best Regards,Saran

    looks like a version conflict to me,just check if you are having any issues due to wrong versions.
    http://help.sap.com/saphelp_nw04/helpdata/en/47/65993f7717fb47e10000000a114084/frameset.htm
    Thanx
    Aamir

  • Changes are not reflecting in Int Directory. Pls suggest

    Hi All,
    I made changes in my Integration Directory.
    I run the scenario. Changes are not reflected in sxmb_moni.
    I do SXI_cache, CPA Cache and then again run scenario.
    Changes are reflected.
    What steps to do so that I do not have to do SXI_cache, CPA Cache again to get my changes reflected.
    Regards

    Hi,
    I have done the post installtion steps.
    My XI was working fine initially
    But yesterday it stopped working properly.
    My ID changes were not reflecting.
    Then I did SXI_cache, CPA Cache.
    Then my ID changes again started working properly.
    Since my scenario has to go in production:
    Pls tell me what steps to do so that
    I do not get this SXI_cache, CPA Cache problem again.
    Regards

  • Document is being distributed - changes are not possible

    Dear Guru's
    I have an issue when making a quotation transaction. After i saved the quotation transaction, i would like to change the window into edit mode.
    So i have to click the display or change button and then after i click that button, there is an message text   "<b>Document is being distributed - changes are not possible</b>" but after i wait for some minute, system still can not be change. and still appearing a message text "Document is being distributed - changes are not possible"
    Please could u give some information about this issue?

    The order in the CRM system remains in status 'to be distributed'
    because it waits for an answer of the OLTP system that the order has
    been successfully saved.
    The reason could be due to the following:
    1. Check in your system the delta download is active ?  Did you perform
       an initial download of SALESDOCUMENTS ?
       If you check in transaction R3AC4 there must be an entry for
       SALESDOCUMENT to enable a successfull delta download.
       Without a successful initial download of this object, no delta
       download will be performed.  Please refer to the SETUP AND
       DOWNLOAD guide you will find in the service market place
       http://service.sap.com
    2. Check if there are any ABAP Dumps related in OLTP ?  If yes, status
       will always be in distributed as CRM is still waiting for a reply
       from OLTP.
    3. Check your inbound/outbound queues are working.
    The note 490932 will help you to check your dataexchange
    customizing.
    Please, reward points if it helps you.
    Regards, José Ignacio

  • Problem in building and changes are not reflecting

    Hi Team,
    When I am building my DC, It is building without any errors,
    But it is not showing anything like build failed yes or no.
    I feel Its not building my DC,bcoz in tasks its not showing my DC name.
    When I deploy, It is deploying without any errors, but my changes are not effecting.
    What could be the problem ?
    Thanks in advance.
    Regards,
    Naresh

    Hi Ayyapparaj,
    Thank you very much for your reply.
    I have reverted the activity i have created for the DC, and deleted the activity.
    I have deleted that DC from my NWDS also.
    Now I have created the project again, with new activity.
    And made the changes, build and deploy.
    But still the changes are not effected.
    When I build my DC, It is not showing any errors in tasks,
    but My DC name is not there in tasks.
    I feel my Dc is not building at all.
    If some other user is created any activity on same DC but not checked in, then will create this kind of problem ??
    I am not sure , where it is going wrong?
    Its not showing like build failed---NO.
    Its not showing any errors also.
    Build is happening within 2 seconds.
    Can you please sort it out..??
    Thanks in advance.
    Regards,
    Naresh

  • Query changes are not reflecting

    Hi All,
    Scenario: We have changed in Query from Query Designer in BED system and moved to Quality system but the changes are not reflecting. After checking tables RSRREPDIR and RSZCOMPDIR, we found out the information as below:
    Note: Production System - BEP
    Quality - BEQ
    Development - BED
    We have 2 issues with Queries in different systems as below:
    Issue 1: Query name: T01
    Issue 2: Query name: T02
    Issue1:
    Table - RSRREPDIR
    BEP -
    COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M   (also present in table - RSZCOMPDIR)
    GENUNID : 4U2QC61SREY9HKJFVEHM894CU
    BEQ -
    COMPUID : 4T6BTKW1X3RYN7H2UO4WMLWLQ   (also present in table - RSZCOMPDIR)
    GENUNID : 4T6BUM0LKCPAO5H71ZG983P72
    COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M   (also present in table - RSZCOMPDIR)
    GENUNID : 4U2QC61SREY9HKJFVEHM894CU
    BED -
    COMPUID : 4T6BTKW1X3RYN7H2UO4WMLWLQ   (also present in table - RSZCOMPDIR)
    GENUNID : 4T6BUM0LKCPAO5H71ZG983P72
    COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M   (not present in table - RSZCOMPDIR)
    GENUNID : 4U2QC61SREY9HKJFVEHM894CU
    Issue2:
    Table - RSRREPDIR
    BEP -
    COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6   (also present in table - RSZCOMPDIR)
    GENUNID : 4U188U6N2623QPCTMC43MFOZY
    BEQ -
    COMPUID : 4T6MDKABLUBC46HOKZMC0K6KU   (also present in table - RSZCOMPDIR)
    GENUNID : 4T6MEWPZ6178KB4LDKDREY34E
    COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6   (also present in table - RSZCOMPDIR)
    GENUNID : 4U188U6N2623QPCTMC43MFOZY
    BED -
    COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6   (not present in table - RSZCOMPDIR)
    GENUNID : 4U188U6N2623QPCTMC43MFOZY
    but in Table - RSZCOMPDIR
    BED -
    COMPUID : 4T6MDKABLUBC46HOKZMC0K6KU  
    GENUNID : 4T6MEWPZ6178KB4LDKDREY34E.
    Please suggest which query element and from which table we should remove to have a sync with all systems.
    Thanks in advance!!
    Regards,
    Niranjan Chechani

    If possible can u Compare  Bex queries in All 3 systems Using RSRTQ tcode, Either they are matching or not?
    How to compare using RSRTQ  u can Refer Below :
    Compare Bex Queries in Different Client /System.
    Regards,
    Seshu.P

Maybe you are looking for