Screen Lock - No Screensaver
Hi all!
Got a Q, ever since upgrading to SL, when i do "Lock Screen" from the keychain access menu item, the screen locks and goes black, but the screensaver no longer activates.
In Leopard, when i locked the screen it let my flurry screensaver run.
Anyone else have this? or is it an upgrade glitch?
Cheers
I see the same behaviour, but I'm not sure whether it is or isn't a bug. However, it is inconsistent with the previous behavior of OS X.
Curiously, in previous versions of Mac OS X (pre-10.6) there was an intermittent bug where the Security pref pane did not respect the "Require password after sleep or screen saver begins" setting. At some point it always defaulted to requiring authentication after the screen saver was triggered (even if that option was unselected).
I have noticed that the "Require password after ..." setting above now works correctly under Snow Leopard (10.6). Perhaps that fix involved decoupling the screen saver from the "Lock Screen" action of Keychain Access? One may rationalize that locking a screen does not necessarily imply running a screen saver.
Similar Messages
-
E7 screen lock without screensaver or black screen...
Is there a way to lock the E7 screen lock without screensaver or black screen?
With the almost over-sensitive touch screen interface there is a constant danger of hitting a function by accident, therefore one must have the screen locked at all times. However, it would be important to see the home screen or the running application.
I use S2PuTTY for work and I need to see the screen, with or without backlight, not a clock display or blank screen. With S60 this was no problem, that's why I have an E72 for backup and SSH use. The E7 would be a better phone for this, if only it would show the contents of the screen while being screenlocked.
Any hacks or software for this? A transparent screensaver perhaps? Anyone..? This instant-blank screen was IMHO a stupid thing to copy from iPhone, especially when it won't even save any battery power because of the backlight and the clock display.seppuku wrote:
The only way would be extending the screen saver timeout to max 30 minutes (AFAIK).
E7 has an AMOLED display which does not have any backlight, so the less lit pixels on screen the less power it uses.
No, the timeout setting only adjusts the time it takes for an unlocked display to autolock. When it does, it goes black or clock. The same as turning the lock switch.
I need a touch screen with screen on and touch sensitivity off. It doesn't have to be forever, but say 10min at a time would be needed. I'm amazed that the UI designers have forgotten about the possible need to see what the phone is doing while safe from inadvertant touch input.
(You're right about the AMOLED) -
Hello guys
My major problem with gnome 3 is that I'm unable to lock my screen.
I tried every possible alternative such as locking after suspend via pm-suspend, the gnome-menu or closing the lid.
Even lock screen via the gnome-menu doesn't work.
Furthermore I changed my dconf and gconf multiple times ( especially the lock-use-screensaver setting) and tried every solution posted in the web. But nothing solved my problem.
I also tested using GDM in stead of SLIM ( which I prefer ) but this solved my problem neither.
My laptop is an Acer Aspire 3820TG Timeline X running the newest kernel ( 3.0 ) and Gnome 3.0.2.
If you need more information don't hesitate to ask!I'm not sure what is "ridiculous".
When on a call using the iPhone's earpiece - holding the iPhone up to your ear and face during a call, the iPhone includes a proximity sensor to automatically turn the screen off or lock the screen when doing so - there is no need to press the sleep/wake button while holding the iPhone up to your ear and face during a call. When pulling the iPhone away from your ear and face during a call to look at the screen and to use the iPhone for something else during the call or to hang up the call, etc., the screen turns back on. This is done automatically. -
Hi,
increasingly of late, and now permanently, when the screen locks on my 808, either by the slider or timer, the screensaver doesn't appear.
The screen stays as it is and bright all the time. The screen is locked and the lock symbol appears, but no screensaver.
I used to be able to solve it by rebooting several times, but no longer.
Anyone seen this before or got any ideas how to solve it?
Cheers,
AntonyHi macaroni,
the following procedure might help you - it worked for me a few times:
Go to Menu -> Settings -> Themes -> Screensaver.
The hook on the left side might be on "none" or "big clock" or "Sleeping Screen", it does not matter.
Now select "none" and select your desired screensaver again (if you choose Sleeping Screen, you'll see a configuration window, go back).
Lock your phone and see if the screensaver appears.
6600 -> N90 -> N95 8GB -> (skipped N97) -> N8 -> N950 -> 808 PureView -
I would like to enable a screen lock after resuming from suspend. i am using the latest xorg thats in the repos, openbox, and slim.
anyone have any ideas?jcolinzheng wrote:
thelastknowngod wrote:
jcolinzheng wrote:http://aur.archlinux.org/packages.php?ID=3844
Add xtrlock & to the end of the suspend script.
P.S. On very rare occasions xtrlock fails to grab input focus, e.g. when the Opera address bar has input focus, most window manager hotkeys don't seem to work.
that application worked like i assume its supposed to. if that displayed a blank screen instead of showing the desktop then i would be a lot happier with it.
Haha, yeah, we just gotta find some app that takes full screen and run it before xtrlock.
there is xlockmore in community. that seems to do the job. it displays a screensaver when resuming though. if there was a way to configure it to just be blank that would be cool.
Edit: or just a picture of a login promt so the person wouldnt just shut down the machine thinking something is wrong with it.
Last edited by thelastknowngod (2008-12-13 16:51:34) -
Multiple AD Group Policy Screen Lock Policies
I am looking to have multiple screen lock policies one for X minutes and one for Y minutes, is this possiable, and how can I configure this?
Yes you can do this. A few ways are possible. From memory the screen saver policy is user based rather than computer based.
You can create two GPO's and configure the screensaver setting you want in both. Then you can do one of two things.
1. apply each policy to a different OU where the users reside
2. create two security groups - one for each GPO. Then remove the authenticated users group from the GPO security settings and add your new security group to the GPO and give it read and apply group policy. Then add your users to which ever group you want.
Apply the GPOs to either a user OU, or domain level - which ever works best.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn: -
X 1.11 vulnerability (screen lock inefficient)
quoted from http://seclists.org/oss-sec/2012/q1/191
"I recently found out that it is possible to kill a screensaver/screen
locker program on the latest version of Xorg (1.11 shipped with
archlinux, debian wheezy..) using the Ctrl+Alt+Multiply key binding."
proposed workaround quoted from http://seclists.org/oss-sec/2012/q1/197
"As a temporary solution, I've found that commenting lines 44-49 in
/usr/share/X11/xkb/compat/xfree86 (actual location may vary for your
distro; mine is a debian system), which are
interpret XF86_Ungrab {
action = Private(type=0x86, data="Ungrab");
interpret XF86_ClearGrab {
action = Private(type=0x86, data="ClsGrb");
and running
"setxkbmap $(setxkbmap -query | grep layout | awk '{print $2}')"
solves the problem."
Note this is written for debian, but it worked on my Arch Linux too.
Last edited by anubis (2012-01-20 13:42:28)It's a simple dualhead setup. I don't really have links, when I read, that C-A-* does something weird, I thought hitting C-A-- and C-A-+ sounded like a good idea.
So, I have two monitors connected to my gfx-card. This is how my 10-monitor.conf looks.
Section "ServerLayout"
Identifier "DualSreen"
Screen 0 "Screen0"
Screen 1 "Screen1" LeftOf "Screen0" #Screen1 at the right of Screen0
Option "Xinerama" "0" #To move windows between screens
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "Enable" "true"
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "Enable" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
# SubSection "Display"
# Depth 24
# Modes "1366x786_60.00"
# EndSubSection
Option "metamodes" "1920x1080,1920x1080; NULL,1920x1080"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "1"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Now when I hit C-A-+, the left screen goes black and "both screens" reside on the right screen, as one big 3840*1080 plane, but I can only see a 1920*1080 portion. I can move the visible portion by moving the mouse towards the left and right edge. Hit C-A-+ again and it turns back to normal.
It seems to be called a "virtual screen": http://www.x.org/wiki/FAQVideoModes#Whe … _want_that
Last edited by Awebb (2012-01-22 12:38:28) -
I have just updated my N8 Email/Calendar function, using Nokia Suite. My phone is on Belle, but not Belle Refresh as my UK operator (O2) has not authorised the update. All appeared to go smoothly. However, the screen lock function seems to have changed. Previously, sliding the switch locked the screen and completely blanked it. Now, sliding the switch locks the screen but does not blank it - it remains on my homepage (not a screensaver). I have looked for obvious settings that would change this but can't find any. Any ideas? I would like to go back to the blank screen when locked if possible, to save battery power.
Chris
Solved!
Go to Solution.Thanks- I had already done the turnoff/on again trick twice but you prompted me to try a thrid time. Third time lucky. Don't you just love software!
-
When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, the problem arises whenever I unlock the phone, it automatically redials the last failed call, it doesn't do this with missed calls that are on the locked screen, if any. It is really annoying as sometimes the phone doesn't respond to attempts to end the call before it connects to the number. I then have to explain that it was my phone and not me, I look like an idiot, which I don't really need any extra help with!! Does anyone have any ideas? I don't want to stop missed call from showing in the locked screen but it might be associated with the failed calls and therefore be the only resolution
I have had the same issue which was driving me mad but think I have just found a way around it. In iOS 7 if you swipe up on the lock screen to access quick settings and go into timer then click the home button you get into the phone without calling the person back. Not a great 'fix' but hope it works for you. Come on Apple this isn't good enough, fix this bug otherwise you will lose your customers.
-
I have iPhone 4 and 4s. WiFi is automatically switching off on both phones when they are inactive (screens are locked). It is connecting back after some seconds I unlocke the phone. But because I have no subscribtion for the Cellular data usage, I am being cuted from Internet all screen-locked period. All that time people are not able to reach me by email, skype, or other programs using Internet. It is quite uncomfortable, especially when waiting for something important! Is there a way to change this setting?
The iPhone does not shut down WiFi completely when asleep. It does use a power conservation mode. You should still receive notifications. There is no setting for this. It should work for you as it does for me if you don't have a network problem.
There are lots of problems reported with D-Link routers and they don't have a great reputation. If there is no help available from D-Link you may want to consider installing the DD-WRT firmware. It's available for the D-Link 615. See here for information: http://www.dd-wrt.com/site/index
By the way, you do have Notifications enabled for the Apps you are talking about right? See Settings -> Notifications and Mail, etc. -
I think I have discovered a bug in the iPod Nano software. I'm using the latest software available as for today.
I lock the iPod Nano's screen and as expected, the graphical display of a combination lock appears. I insert the iPod Nano on to the Universal Dock and then proceed to control the Nano from the Apple Remote. It works partly. I am able to pause and play music and after a song finishes, it goes to the next one. I am not, however, able to fast forward, rewind, or skip tracks. I am able to play and pause, plus the Nano goes to the next track automatically after it finishes play the current one.
Seems to me a bug! I would imagine that the screen lock is supposed to lock all kinds of control to the iPod except entering password.connect it to itunes and it will unlock
-
I lost my iPad! I initially set up a screen lock in iCloud, only to find out that I would then not be able to find my device. I then removed my device from the list in iCloud. Now, after clicking on "find my iPhone", it does not appear in the list. How do I get it back in my list of devices? The fact that it was originally in the list, does it mean that I did activate "find my iPhone"?
you did activate find my iPhone but because you removed it from the devices list, you cant do anything further. You need the device to add it back to the list.
-Brenden -
Windows 8.1 Lock Screen drops network connectivity when screen locked using Win+L
Hi!
I was sent here from Microsoft Community forum. The question is:
Since Windows NT 4.0 I'm using Lock Screen to prevent people from accessing my computer when I'm leaving my room. First I was using CTRL+ALT+DEL / Lock Screen, then switched to Win+L keyboard shortcut when it was first introduced.
Everything was fine until I switched to Windows 8.1 computer (Sony Vaio Duo 13 with Broadcom wireless network controller). This machine is 8.1, not 8.0 upgraded to 8.1.
My problem is that when I hit Win+L combo the Lock Screen (with clock etc.) is displayed. Then, despite I have configured not to turn off display, the screen goes blank (after 30 seconds since lock) and network connectivity is cut off from desktop
apps (I suspect the system goes into Active Standby mode, because Modern UI apps like Tune-In radio keep working fine).
100% repeatable scenarios:
## Scenario 1 ##
1) Log in
2) Open desktop app that uses network connectivity. Outlook 2013 from Office365 subscription
3) Check that it has connected
4) Lock screen (Win+L)
5) Wait for 30 seconds (first incorrectly posted as few minutes) as screen goes black
6) Unlock screen (using password)
7) In right corner of Outlook app you will see "Unable to connect with Exchange server" and few seconds later it will reconnect sucessfuly
## Scenario 2 - the more annoying ##
1) Log in to Win 8.1 computer
2) Connect to it using SMB (in my case I wanted to transfer 30 GB of files from local hard drive C: to server) \\COMPUTER-NAME\c$ from Windows Server 2012 R2
3) Start copying files from computer to server
4) Lock the screen on computer
5) As soon as screen goes black server displays message "Lost connection to the resource. Try again?"
6) Unlock screen on the computer
7) Click "Try again" and it will continue copying files
My power settings are set to go into stand by after 5 hours and if I not lock the screen it doesn't go to sleep before 5 hours.
When I lock the screen using Win+L it goes into (probably Active) Standby mode.
Is there any way to prevent it from going to Active Standby when locking screen? I need the screen lock for security reasons but I don't want it to drop my network connectivity on remote desktops, file transfers and other desktop activities before 5 hour
timeout.
This issue is not related to more or less known wireless network connectivity problem that happens to many Intel Haswell computers. Mine doesn't exhibit those problems. I can easly push 100 - 200 GB of wireless data without network drops.
Computer information:
Sony Vaio Duo 13: SVD1322C5E
Intel Core i5-4200U
8 GB RAM
Windows 8.1 Pro 64-bit
Broadcom 802.11n SDIO network adapter
Originally posted at: http://answers.microsoft.com/en-us/windows/forum/windows8_1-networking/windows-81-lock-screen-drops-network-connectivity/099f16bd-b00d-4ba9-b833-48bf1d55ffe4
Best regards,
SergiuszSame issue here using Surface 3 Pro with either internal WLAN or MS USB LAN Adapter. I'm frequently used to keep open connections over SSH to some servers. On switching to lock screen explicitly by pressing Win+L or implicitly due to idle timeout all
connections to servers are lost. In addition, I don't get any notifications on incoming Skype messages (using Skype for desktop) when lock screen is active.
Neither NIC is showing "Power Management Tab" according to step 5 of instructions above.
Additionally observing USB LAN NIC seems to be kept active after activating lock screen, but traffic stops (according to its flashing light) when lock screen is switching off display. Blanking display doesn't seem to be adjustable in System Settings (Energy
Options accessed through Win+X).
Find attached log file of powercfg -energy -duration 300 ...
Log file is in German. It basically claims unset timeouts for deactivating display while running attached to power supply though lock screen is turning off displays within 1-2 minutes.
Energieeffizienzdiagnose-Bericht
Computername
KRITIAS
Überprüfungszeit
2015-01-10T15:07:47Z
Überprüfungsdauer
353 Sekunden
Systemhersteller
Microsoft Corporation
Systemproduktname
Surface Pro 3
BIOS-Datum
10/16/2014
BIOS-Version
3.11.0350
Betriebssystembuild
9600
Plattformrolle
PlatformRoleSlate
Netzbetrieb
true
Prozessanzahl
67
Threadanzahl
1319
Berichts-GUID
{1a168801-c189-46fe-811c-235e6bf2bd0d}
Analyseergebnisse
Fehler
Energierichtlinie:Verdunkelungszeitlimit ist deaktiviert (Netzbetrieb)
Der Bildschirm ist nicht so konfiguriert, dass er nach einer Zeit der Inaktivität verdunkelt wird.
Energierichtlinie:Standbyzeitlimit ist deaktiviert (Netzbetrieb)
Der Computer ist nicht so konfiguriert, dass nach einer Zeit der Inaktivität automatisch der Wechsel in den Standbymodus erfolgt.
CPU-Auslastung:Prozessorauslastung ist hoch
Die durchschnittliche Prozessorauslastung während der Ablaufverfolgung war sehr hoch. Das System verbraucht weniger Energie, wenn die durchschnittliche Prozessorauslastung sehr niedrig ist. Überprüfen Sie die Prozessorauslastung für einzelne Prozesse,
um festzustellen, welche Anwendungen und Dienste den größten Anteil an der Gesamtprozessorauslastung haben.
Durchschnittliche Auslastung (%)
45.31
Warnungen
Plattform-Zeitgeberauflösung:Plattform-Zeitgeberauflösung
Die standardmäßige Plattform-Zeitgeberauflösung beträgt 15,6 ms (15625000 ns) und sollte immer dann verwendet werden, wenn sich das System im Leerlauf befindet. Wenn die Zeitgeberauflösung erhöht wird, sind die Technologien zur Prozessorenergieverwaltung
möglicherweise nicht wirksam. Die erhöhte Zeitgeberauflösung kann auf eine Multimediawiedergabe oder Grafikanimationen zurückzuführen sein.
Aktuelle Zeitgeberauflösung (100-ns-Einheiten)
10007
Maximale Zeitgeberperiode (100-ns-Einheiten)
156250
Plattform-Zeitgeberauflösung:Ausstehende Zeitgeberanforderung
Von einem Programm oder Dienst wurde eine Zeitgeberauflösung angefordert, die kleiner als die maximale Zeitgeberauflösung der Plattform ist.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Energierichtlinie:Bildschirmzeitlimit ist lang (Netzbetrieb)
Der Bildschirm ist so konfiguriert, dass er nach mehr als 10 Minuten Inaktivität ausgeschaltet wird.
Zeitlimit (Sekunden)
900
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Verbundgerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_0250
Portpfad
1,2
Standbydauer (%)
14
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Surface Ethernet Adapter
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_07AB
Portpfad
1,1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Generischer USB-Hub
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_1006
Portpfad
1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Eingabegerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_0797
Portpfad
1,3
Standbydauer (%)
14
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
firefox.exe
PID
5968
Durchschnittliche Auslastung (%)
1.57
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\xul.dll
0.60
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\mozjs.dll
0.27
\SystemRoot\system32\ntoskrnl.exe
0.16
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
System
PID
4
Durchschnittliche Auslastung (%)
0.59
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.24
\SystemRoot\system32\DRIVERS\igdkmd64.sys
0.12
\SystemRoot\system32\DRIVERS\avc3.sys
0.07
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
dwm.exe
PID
6264
Durchschnittliche Auslastung (%)
0.47
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.10
\Device\HarddiskVolume4\Windows\System32\dwmcore.dll
0.09
\SystemRoot\System32\drivers\dxgkrnl.sys
0.06
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
Skype.exe
PID
11008
Durchschnittliche Auslastung (%)
0.26
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Skype\Phone\Skype.exe
0.11
\SystemRoot\system32\ntoskrnl.exe
0.05
\SystemRoot\System32\win32k.sys
0.04
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
svchost.exe
PID
1528
Durchschnittliche Auslastung (%)
0.25
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.16
\Device\HarddiskVolume4\Windows\System32\ntdll.dll
0.02
\SystemRoot\system32\drivers\ndis.sys
0.01
Informationen
Plattform-Zeitgeberauflösung:Zeitgeberanforderungsstapel
Der Stapel mit den Modulen, die für die niedrigste Plattform-Zeitgebereinstellung in diesem Prozess verantwortlich sind.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Aufrufender Modulstapel
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\d3d9.dll
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\CEF\libcef.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
Energierichtlinie:Aktiver Energieplan
Der derzeit verwendete Energieplan.
Planname
Ausbalanciert (OEM)
Plan-GUID
{381b4222-f694-41f0-9685-ff5bb260df2e}
Energierichtlinie:Energieplancharakter (Akkubetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Akkubetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:Videoqualität (Akkubetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Videoqualität und Energieeinsparung ausbalancieren
Energierichtlinie:Energieplancharakter (Netzbetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Netzbetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:802.11-Energierichtlinie für Drahtlosverbindungen ist "Maximale Leistung" (Netzbetrieb)
Die aktuelle Energierichtlinie für 802.11-kompatible Drahtlosnetzwerkadapter ist nicht für die Verwendung von Energiesparmodi konfiguriert.
Energierichtlinie:Videoqualität (Netzbetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Für hohe Videoqualität optimieren
Systemverfügbarkeitsanforderungen:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben.
Akku:Akkuinformationen
Akku-ID
1F11LGC_LGCX863568
Hersteller
LGC_LGC
Seriennummer
1F11
Chemie
LION
Langfristig
1
Versiegelt
0
Zyklusanzahl
33
Vorgesehene Akkukapazität
42157
Letzte vollständige Aufladung
44209
Funktionen der Plattformenergieverwaltung:Unterstützte Standbystatus
Mithilfe von Standbystatus kann der Computer nach einer Zeit der Inaktivität in einen Energiesparmodus wechseln. Der S3-Standbystatus ist der standardmäßige Standbystatus für Windows-Plattformen. Im S3-Standbystatus verbraucht der Computer nur die Energie,
die notwendig ist, um den Arbeitsspeicherinhalt zu bewahren und die Arbeit mit dem Computer schnell fortsetzen zu können. Sehr wenige Plattformen unterstützen den S1- oder S2-Standbystatus.
S1-Standbymodus unterstützt
false
S2-Standbymodus unterstützt
false
S3-Standbymodus unterstützt
false
S4-Standbymodus unterstützt
true
Funktionen der Plattformenergieverwaltung:Unterstützung von Verbindungsstandby
Mit dem Verbindungsstandby kann der Computer in einen Stromsparmodus wechseln, in dem er immer eingeschaltet und verbunden ist. Der Verbindungsstandby wird soweit unterstützt anstelle der Systemstandbystatus verwendet.
Verbindungsstandby unterstützt
true
Funktionen der Plattformenergieverwaltung:Die adaptive Bildschirmhelligkeit wird unterstützt.
Dieser Computer ermöglicht die automatische Helligkeitsregelung der integrierten Anzeige durch Windows.
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
0
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
1
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
2
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
3
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Gerätetreiber:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben. -
Can't remove the screen lock by PIN and can't use the screen to receive calls
Hello, I have a brand new SONY Xperia , Model Number D5803, Android version 5.0.2. , Baseband version 8974-AAAAANAZQ-00063-42, Kernel version 8974-perf-g3f600d1. , Build number 23.2.A.1.62.
I set a screen lock by PIN. However when I receive calls I can’t take them, because the screen in locked.
I tried to turn off the screen lock, but when I select the “ Screen lock” menu and after entering the correct PIN, the following items are not active “None”, “Slide” and “Pattern” . So I can't select “None”
The only active items are “PIN” and “Password” .
Please advice how to remove the screen lock by PIN. I hope this will help to be able to receive calls.
Thank youTo enable None and Swipe options, you need to go to Settings -> Security -> Clear credentials. Then those options will become active again.
However, you should be able to take calls even when you have PIN security, can you describe what shows on the screen when you have an incoming call while screen is locked?
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos -
how do i get my ipod 5 unlocked from the homescreen? plz help
If you have a passcode to the screen lock that you've forgotten, restore the iPod from the computer to which the iPod is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the iPod into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
If that still doesn't work, as a last resort try DFU mode:
http://www.iclarified.com/entry/index.php?enid=1034
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.
Maybe you are looking for
-
Specific PDF not opening in Adobe Reader on Lumia ...
I get an error message on a Lumia 625 when trying to open a downloaded pdf (88Mb) in Adobe Reader Vers 10.4.3. I have more than 3Gb free space. The file seems to be successfully downloaded & joins the list of all PDF documents in the Adobe Reader app
-
12 classes, only need 1 at a time, array?how? HELP!
Below i have made up the months of the year but as you can see the gridlayout changes for each one which is why i made them up like so. I want to make up an array to hold them and only call them when needed. The problem is that if i do that my code w
-
Can't transfer music from iTunes to iPhone
Ok, so I transferred this CD to iTunes and I'm trying to drag and drop it onto my iPhone but I get a symbol showing that I can't do that. I then tried to check the box under iPhone that says "Manually manage music and videos" but then get a notificat
-
Safari-Firefox both failing to load, network connected
I'm running firefox 19.0 and Safari 5.1.7. Both are crashing by failing to load for 5-10 minutes or in that looks like html code. Network diagnostics indicates network is fine. I've re-started multiple times w no change. Thank you in advance for any
-
Wrong photos/videos reading in About This Mac - Storage Tab
I have updated to Photos from iPhotos but now when i hit about this mac and storage reading ... i get it all messed up it shows 1GB of photos where i have at least 20GB .. is there any way to fix this ? before i used to re-index the database but i do