"Screen Management" in the RF

Hello folks,
I am trying to add a new entry to "Screen Management" in the RF MDE customizing. I input my module pool and all the remaining fields. Then I get the error msg: ENTRY "Zmodulepool" is not defined in table T3130E. There is not any place I can find in customizing to add this entry.
My question is where do I add entries to table T3130E.
Regards,
Vincent

Hi Vincent,
Usually when I need to enter data into a table, I go to transaction SM30 and enter the view (in this case V_T3130E ). I try first to find it in customizing and if it does not exist - I modify it directly.
In this case, it was not possiblr. I received the error message "View/table V_T3130E can only be displayed and maintained with restrictions". It means that "You tried to call a maintenance dialog for the view/table V_T3130E, for which the table maintenance is only allowed with restrictions. You can only edit the data in the environment of another program or a view cluster.".
That is, try to enter new entries (your "zmodulepool") directly into T3130E using a program (batch input).
Good luck.
Isaac

Similar Messages

Find "configuration" in the screen "Manage"

Problem:
Where can I find the "configuration" in the screen "Manage"?
http://technet.microsoft.com/en-us/library/jj193512.aspx

The first step says to right click on Computer in the start menu and pick manage. Since you are using Server 2012 there is no start menu. In the Server Manager dashboard in your screenshot click on the Tools menu and select 'Services'. You
will see the same list of services that you would see in the Technet instructions. The path is just a little different in Server 2012.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Firefox does not appear on screen when started from the start menu, but task manager says the process is running

Firefox does not appear on screen when started from the start menu or the shortcuts, but task manager says the process is running.

No - I get the message basically saying "Can't run program while Firefox is running. Please close down Firefox & try again".
I rebooted my computer and it all works now - but that's weird it was happening before. Kinda weirded out that it happened at all.
To avoid that happening again, I still wanna know what to do to avoid it or fix it for next time. Thanks

With remote management enabled the screen saver never kicks in, the monitor never sleeps

The title says it all. With remote management enabled the screen saver never kicks in, the monitor never sleeps. This is with an iMac. So I have to leave remote management off, which means instead of using remote desktop I have to manage the machine with TeamViewer. Life is still good, but this seems like a bug, and there's a few things remote desktop does that TeamViewer can't.

You should use a specialized tool such as TextWrangler, the Property List Editor, or the defaults command in the Terminal to view and change plist files; those created with recent software are encoded so that a regular text editor will not properly parse them.
(33430)

My laptop have refused to start it will just show windows boot manager on the screen,

My laptop have refused to start up, it will just show windows boot manager on the screen,and me to choose an operating system to start or press tab to select a tool but when I tryed all those things none of it will respond

Thanks also Star 1. I have gone the route you suggest also but with the same results as I explained to the hatter. I have about a dozen die-hard Windows friends and they have been trying to help me also. We have tried everything and I have read a several pages on how to do it but nothing looks like what they are saying it does. When in Vista, Vista says it is the default SU OS. When in XP, XP says it is the default SU OS. So there is nothing to change. Only the Windows Boot Manager (which is really not a manager but a boot selector) shows Vista as default and XP next. I've learned again what I already knew. Windows is a conglomerated piece of crap that is hard as heck to use.

I have screen shots of the messages and what happens when I try to play games on Facebook since I updated Firefox. Issues I didn't have before the update. Where do I send them? How do I correct this?

The screen shots include the web address for both shots. One is for script error messages that keep interrupting EVERY game. Then after I stop the scrip, Adobe Flash crashes, and I have no control. I have to use the Windows Task Manager to gain access to my home page to get out.
This didn't happen until I updated the Firefox this last time. I've tried everything and nothing works to get rid of the problem.
I've been to your questions, etc and nothing I've found helps.
I use Windows XP
Four sites are the worst; I only play these 4 games on Facebook.
URL's of these are:
http://apps.facebook.com/wildwesttown/?ref=bookmarks&count=0&fb_source=bookmarks_apps&fb_bmpos=4_0
http://apps.facebook.com/aviator-game/?fb_source=canvas_bkmk_top
http://apps.facebook.com/gnometown/?fb_source=canvas_bkmk_top
http://apps.facebook.com/journeyofmoses/?fb_source=canvas_bkmk_top&count=1
(I got a script error message just getting the URL on this last one.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

ECM - roll up functionality in ECM when a manager left the company

Hi Experts,
When a Manager B reports to Manager A. Manager B leaves the company and has 5 employees reporting to him; his position is now vacant in SAP. Should Manager A now see the 5 employees that reported to Manager B in Manager Au2019s list of direct reports in the initial planning screens? I meant automatically roll up to the one-up manager.
Currently, this is not happening in my system, the manger A need to go search from the Org Unit dropdown to find manager Bu2019s employees. Is there a configuration setting for this?
Thanks!
Susan

Hi Susan,
The recently released EhP4 constitutes "Multilevel Approval Process" centered upon the organizational structure of the enterprise, rather than the employees assigned to the units within it. Because the Multilevel Approval Process is based on the organizational structure, it is designed with the intent of simplifying, for each successively higher-level manager within that structure, the administration and execution of the entire compensation planning cycle.
Within the Multilevel Approval Process, the planning manager of an organizational unit is understood to be the manager who is responsible for submitting compensation planning data for employees of that unit who are not managers themselves.
Under normal circumstances, the planning manager of an organizational unit is synonymous with the manager of that unit u2013 provided that a corresponding user is assigned to that manager in the system. However, if an organizational unit has no manager, or if the manager of that organizational unit has no user in the system, then the next higher-level manager who has a user in the system becomes the planning manager for that organizational unit.
This is a completely new functionality. I don't think we have any option uptil EhP4.
Cheers,
DF

Role in bpm when the role is dynamic (manager of the user)

Hi,
Regarding the bpm I face a case as below:
I have a bpm which in one of its step a human task would be generated for the Manager of the user that initiate this process.
Assume that I kept the username of the initiator on one of my variable how can I set the user's manager role?
as in the bpm I just can set the role and in the mapping of bpm role to LDAP role I can not use the xpath or dynamic thin I can just can select the LDAP user or group.
Thanks

Try this:
Go to the "XXX.task" file of your user screen, you can find it in the structure tree on the left panel inside the "SOA Content" directory of your main project.
You will see a serie of tabs in the left side of the new window. Go to "Assignment".
There you will see a default.DefaultPerformer inside a box. Click on it and the on the pencil icon to edit it.
In the new window you can add the participants using the "by name" or the "by expression" option. If you have the username stored in a variable, you can use it here to dynamically assign the task.
Hope this helps.
Let me know if this doesnt work.

Color management for the umpteenth time

I am flummuxed by color management. I have read everything about it and still I have mixed results. Lets start at the basics:
1)I have a Canon pixma 6600d printer
2)I have calibrated by lcd monitor with Huey.
3)I use elements 5.0
4) I have assigned pictures for Adobe rgb.
5) I have read the instructions from Steves Digicam which recommends that I make the source adobe rgb and the target the paper profile that I am using. I am using the correct paper profile.
6) In Print preview, I set the color adjustment to manual, say no to icm, and none to media. This is according to the instructions of all color management gurus.
Some interesting things are happening. When I print a picture file that is Dng (adobe camera raw), the print looks terrible.Too much saturation. heavy magenta, etc. When I print a jpg file of the same picture, the result is much better although not the best. The best match is for one of 2 options. 1)Turn off icm in pe5, use printer color management. or 2) leave on Adobe rgb in pe5. In print preview: set source to adobe rgb. In printer profile, set to adobe rgb and relative colormetric. In Print driver, set color adjustment to auto. These are the most satisfying results.
Questions:
1) Are there problems in printing from a dng file or should I always try to print from a jpg file on my 6600d?
2) If I am using printer color management, should I always turn off color management in pe5 edit?
3)Is there anything else I haven't thought of that explains why I am having lousy results using the correct canon paper profiles in the print preview screen?
Thanks. I know this has been covered a million times.
Andy

Andy....
1. Same as Source - The data that's sent to your Printer is still the data that was created for the Colour Space of the Image. In your case the Source Space indicates sRGB. So sRGB colour numbers get sent to the printer.
What doesn't get sent is any profile information i.e there is nothing to tell the printer your sending it to that the colour space is sRGB. This means that if the printer is to perform colour management, it can't because it doesn't know the source profile - although there may be an option in the Printer Driver to force it to a preset.
2. In some Epson Printer Drivers there are two or more settings for Colour Management and yes they are confusing and I don't think consistent across the range.
I can't tell you all the possibilities but on my R2400, the ICM checkbox turns on Colour Management in the printer and then you have to select a bunch of other options about input profile, rendering intent, and output profile e.g. for the paper/ink type etc, etc,
However, by checking ICM ( on the R2400) it also makes visible an option called No Colour Adjust and by checking this it turns OFF colour management.
So, yes confusing, ICM appears to turn CM ON and then NCA turns it OFF. If this is the setting you use then in Elements you have to select a Print Profile that matches the printer/paper/ink i.e one of the Epson profiles.
3. The Printer Colour Management setting tells Elements to do no Colour Management but it will pass source data to the printer along with a profile.
Elements wont convert the Source Colour Space to the Printer/Paper Colour Space. The assumption then is that you set the Printer Driver accordingly to do the Colour Management Conversion. This might typically be to check ICM and select those features I mentioned in #2.
4. As for the R380 - I can't say what settings that have but take a look at the link below for more info about setting up Epson Printers.
It shows the R800 but the info may be similar for your 380
http://tech.epson.com.au/downloads/message.asp?platform=&techtips=techtips&EmailAdd=&Metri cIDReturned=1044920&submit=Search+%3E%3E&sCategory=Inkjet&id=stylusphotor800
Colin

I have set the presence to screen only but the checkbox still prints adobe livecycle

I have set the presence to screen only but the checkbox still prints. I am using adobe LiveCycle design 9 and it is a dynamic form
This check box is part of an action, where when clicked, it copy's the data from one row and puts it in another. It is also in a row that can be added and removed.
But basically I want the check box to appear on the screen but not print (including when the form is converted to a PDF when its completed)

Intel-based Macs: Resetting the System Management Controller (SMC)
Power
The computer sleeps or shuts down unexpectedly.

I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw)

Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw here.)
Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?

I was confused by this statement
It is telling me the harddrive is full and is not functioning correctly.
OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD. Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them. There is no design flaw between your ram and HDD. Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
I would do three things. First I would create a backup, backups are important. Second, I would reboot into recovery and repair my HDD. Lastly while still booted in recovery I would repair permissions.
Can you capture a screen shot of the exact error you are getting?

Need to enhace tcode FD32 to add new screen fields on the initial screen

Hi All,
I am supposed to add two new screen fields on the initial screen of TCODE FD32,
I am unable to find any screen exit for that. Is there any screen exit present for that or is there any way to do this.
Kindly help me, solutions will be greatly rewarded.
Thanks in advance,
Nagaraju.

check below
Transaction Code - FD32                     Change Customer Credit Management
Exit Name           Description
RFDRRANZ            User exits: Accounts Receivable Information System
No of Exits:          1
Rewards if useful...............
Minal

Hierarchy used in "People in Hierarchy" screen (Manager Actions)

Hi All
Which hierarchy is used in "People in Hierarchy" screen (Manager Actions)
I tried the following.
Create a position hierarchy and created a security profile as follows
View Employees - Restricted
View CWK - Restricted
View Applicants - Restricted
View Contacts - Restricted
View Candidates - All
Organization Tab
Security Type: View All Organizations (no security) -- not adding any thing
Positions
Position Hierarchy : Test Position Hierarchy (Name of hierarchy)
Radio button checked for "Use the User's assignment(s) as the top position.
Checked boxed checked for "Include Top Position"
Rest of the tabs are blank.
Attached this profile to the responsibility Manager Self Service through which I am accessing Manager Actions Function.
When I go to Manager Actions screen I found that both supervisory AND position hierarchy are applied. If a person is in position hierarchy and supervisory hierarchy only then it will get displayed there.
Is it possible that I can use only position hierarchy at that place.
I am on Apps R11i, Family Pack K,
Thanks
Gaurav

Hi Gaurav,
It depends on the responsibilities assigned to employee. That means
If an employee has
"Manager Self Service" with profile "Position Hierarchy" and "HRMS Manager" with profile "Supervisor Hierarchy", then both will be applied.
So, check and make sure that only one security profile is available at any point of time.

I'm receiving a download error in Creative Cloud Manager on the Apps tab

Here's a screen shot of the error page on the apps tab. I've uninstalled and installed the manager. I've went to account preferences and logged out and signed back in. I need this fixed.

LVGosnell please try utilizing the second solution listed in CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

SQL Server 2014 Management Studio - "The operation could not be completed"

Hi there!
I've recently installed SQL Server 2014 Express Edition to my Windows 8.1 x64 computer. It was working fine for one month or so. Now, when I try to open Management Studio I get the error "The operation could not be completed". A few seconds into
the splash screen. Then the application shuts down.
I don't have any errors or warnings on Event Viewer. Not even any information lines related to SSMS when opening. I've tried to use ProcMon but I can't see any events related to SSMS.exe that could give this result. I've already installed Cumulative Update
2 for SQL Server 2014 with no luck. Also, I've repaired SQL Server installation and even reinstalled this instance with the same outcome.
I know this topic has already been written before but it was related to Windows Server. The response marked as Answer was not applicable to my case. As I said, I'm using Win 8.1 x64.
I'm out of options for now. Can you please give any help?
Thank you so much.

Hello,
Before reinstalling Windows, please try the .NET Framework Repair Tool.
http://www.microsoft.com/en-us/download/details.aspx?id=30135
If the above did not help, you may want to try the automatic repair option.
http://www.bleepingcomputer.com/tutorials/http-wwwbleepingcomputercom-tutorials-automatically-repair-windows-8-with-automatic-repair-/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

"Screen Management" in the RF

Similar Messages

Maybe you are looking for