Screen problem in Module pool program

Hi all,
I have developed a module pool program, in which i have used simple selection screen and after executing it will call screen 9001 to display the data. everything is goin fine but if i leave my output screen as it is for some time (or even if i lock my system then unlock it) i am getting an error message
"Selection screen ZDEV1110PGM_SF 1000 was not called using CALL SELECTION-SCREEN".
do any one have idea why this is happining without doing anything further to the output.
Regards,
Nilanjana

Have you used CALL SCREEN ?
Regards
Abhii

Similar Messages

Problem in Module Pool Program

Hi All,
I got one problem in Module pool program.Im using table control.when selected multiple coloms by table control option left top.
when I want to de-select one by one,unable to de-select. Please suggest me.
thank you,
Anu.

Thank You All.
Solved my self.
The coding as below.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN SUB INCLUDING SY-REPID '110'.
LOOP AT GT_ITAB INTO WA WITH CONTROL VCONTROL.
    MODULE SET.
    MODULE STATUS_0100.
ENDLOOP.
PROCESS AFTER INPUT.
   CALL SUBSCREEN SUB.
LOOP AT GT_ITAB .
    CHAIN.
      FIELD WA-EBELN.
      FIELD WA-EMATN.
      FIELD WA-EBELP.
      FIELD WA-MATNR.
      FIELD WA-MARK.
      MODULE MODIFY ON CHAIN-REQUEST.
    ENDCHAIN.
ENDLOOP.
    MODULE USER_COMMAND_0100.
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'SAVE'.
      PERFORM SAVE_VARIANT.
      PERFORM VARIANT_EXISTS.
    WHEN 'SEL'.
      LOOP AT GT_ITAB INTO WA.
        WA-MARK = 'X'.
        MODIFY GT_ITAB FROM WA .
      ENDLOOP.
endmodule.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ZTESTING'.
SET TITLEBAR 'ZTEST'.
SET PF-STATUS 'ZTESTING' EXCLUDING IT_EXTAB.
MOVE:WA-EBELN TO EKKO-EBELN,
       WA-EBELP TO EKPO-EBELP,
       WA-MATNR TO WA-MATNR.
MOVE:WA-EMATN TO WA-EMATN.
MODIFY GT_ITAB FROM WA INDEX VCONTROL-CURRENT_LINE.
VCONTROL-LINES = SY-DBCNT.
ENDMODULE.                 " STATUS_0100 OUTPUT
MODULE SET OUTPUT.
SET CURSOR FIELD CURSORFIELD OFFSET POS.
ENDMODULE.                 " SET OUTPUT
Thank You,
Anu.

Strange problem in module pool programming

Hi all,
we have a module pool program which consists of screen 100 and 200 and 3 sub-screens 201,202 and 203.the problem is when we double click on any field we get a pop up message which should appear only when we press the 'SAVE' button for which ok_code is 'CHNG'.I have debugged the program for screen 100 pbo,pai,200 pbo but the value of ok_code is not equal to 'CHNG' then it takes me to screen 200 and when i double click then popup appears and and in 200 PAI the value of ok_code had already got changed to 'CHNG' without entering the change logic and I have not even pressed the SAVE button which has 'CHNG' code associated with it.Can any one help me solve this problem.I wish I could give a better explanation.
Thanks and Regards,
Sangram

Hi,
This is because the Shortcut key assigned to SAVE button in PF-STATUS is "F2". F2 is for Double Click. Assign some other Function Key to SAVE or any Button. Try to avoid assigning F2 key.
This would solve the problem.
Best regards,
Prashant
PS : Please reward all helpful answers !

F4 help for the screen fields in module pool program

Hi All,
I have a requirement that, i want to provide F4 help for the 2 fields in module pool program. the fields are document number and fiscal year from rbkp table.
i could provide search help for two fields.
but how to select matching fiscal year for that document number.
problem: i am getting fiscal year as first four digits of document number.
please help me to solve this problem.
Thanks & Regards,
Namratha.V

Hi,
If your requirement is after selecting the document no from f4 help then the corresponding year should be updated in the document year field then use FM --> DYNP_VALUES_UPDATE
In this function module pass the screen no program & field for which u want to update value

Selection screen problem in module pool

Hi friends,
I am working on module pool programming, I need to put select screen on the screen of the module pool porgramming. I used Input/Output field to do that and activated. But I am getting message invalid field format (screen error) can any one tell me why I am not able to run the seletion screen when I am using input/output field, also please let me know how to solve this problem.
Regards,
Line

Hello,
Think that this is useful for u/
SELECTION-SCREEN - Defining selection screens
Variants:
1a. SELECTION-SCREEN BEGIN OF SCREEN scr.
1b. SELECTION-SCREEN END OF SCREEN scr.
2. SELECTION-SCREEN BEGIN OF SCREEN scr AS SUBSCREEN.
Effect
Defines a selection screen with the number scr. scr may be up to 4 digits.
SELECTION-SCREEN BEGIN OF SCREEN scr.
Additions:
(zu SELECTION-SCREEN BEGIN OF SCREEN scr) 1. ... TITLE title
2. ... AS WINDOW
Notes
In reports (type 1 programs), a selection screen with number 1000 is created automatically when you use the SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statments. This selection screen appears when you SUBMIT the report.
In any type of program (apart from subroutine pools - type S), you can define further selection screens using SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN. You enclose these statements between the SELECTION-SCREEN BEGIN OF SCREEN and SELECTION-SCREEN END OF SCREEN statements.
You call these screens using the CALL SELECTION-SCREEN statement.
Screen number 1000 is not allowed (reserved for standard selection screen).
When you generate the program, all user-defined selection screens are also generated.
Within a report (type 1 program), all SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statements outside a SELECTION-SCREEN BEGIN/END OF SCREEN block form part of selection screen 100 (standard selection screen)
Regards,
LIJO JOHN.

Cursor position on screen data in module pool programming(urgent)

Hi all,
I developed a module pool program which will save the data after scanning the barcode data.
In my program screen 100 is there which contains field 2dbar. scanned data is comming to 2dbar field.
we r doing scan 4 times.once for vendor number,once for material no. like this.
After 1st scan, vendor number will come to field 2dbar.
Then I developed logic to put comma after each scanned data come to this field 2dbar.
MODULE put_comma INPUT.
CASE OK_CODE.
when ''.
move 2dbar to 2dbar1.
clear 2dbar.
concatenate 2dbar1 ',' into 2dbar2.
*replace 2dbar with 2dbar2 into 2dbar.
move 2dbar2 to 2dbar.
*write 2dbar2 to 2dbar.
condense 2dbar no-gaps.
*move '' to 2dbar.
*set cursor field 2dbar offset 5.
*write
ENDCASE.
ENDMODULE. " put_comma INPUT
By above logic, comma comes to the starting position of 2dbar after each scan. i.e cursor position is coming to the starting position of screen field 2dbar.
Now I need to move the cursor position after the comma position on 2dbar after each scan.
after 1st scan, 2dbar contains
vmotorola
then my logic puts a comma when u put enter on screen 100.
now 2dbar contains
vmotorola,
i should get the cursor position after the comma.but i am getting cursor position before 'v'.so how to move this cursor position beyond comma after each scan.
I added set cursor command but it is not working.plz
What is the logic, I need to put in PAI to move the cursor on selection screen.
Already the logic I have mentioned. with that logic, I can put comma.now I need to add cursor movement logic to move the cursoron on screen field 2dbar.
Plz reply me as it is urgent.
Thanks in advance.
Regards
pabitra

CASE OK_CODE.
when ''.
move 2dbar to 2dbar1.
clear 2dbar.
concatenate 2dbar1 ',' into 2dbar2.
move 2dbar2 to 2dbar.
condense 2dbar no-gaps.
len = strlen ( 2dbar ).
len = len - 1.
set cursor field 2dbar offset len.
ENDCASE.
ENDMODULE. " put_comma INPUT

List Box Problem In MODULE POOL PROGRAM(EDIT MODE)

I Have Developed A MODULE POOL PROGRAM ,
It Basically Consists Of CREATE EDIT and DISPLAY Modes.
CREATE MODE:
When I am Creating For Example FORM NO 1,it is having Fields With drop down list box with values
A,B and C. if I Choose A then That form will Get Created With A value and Form 1 will be created.
EDIT MODE:
The same form If u want to edit In EDIT Mode ,it is displaying value A and it Showing the list box in the fillowing Manner.A,B,C,and A.(This is what the problem I am Facing Know).It Is Displaying the value two times.How to Avoid this ,PLs Help me in this regard.
Thaks & Regards,
Anuradha.

Where ever you are populating the List Box, write a REFRESH statement just before that.
Means Refresh the old content and add new content

Problem in Module Pool Programming

hello,
I am using module pool programming.
i want to assign the text to textbox during runtime
thanks!

Hi Raghvendra Bhanap,
declare the variable with the same name of text box(In module pool) and in the PAI even write the module by double clicking on that in your program just assign some text to that name then the text automatically come in that text box.
See this example programm.
*In Screen Painter PAI Event.*
moudle assigntext.
In your Program.
Data w_name(40). (*In the module pool also put this name only)
Module assigntext.
w_name = 'Raghvendra Bhanap'.
Endmodule.
Reward if it is useful,
Mahi.

Screen Attributes in Module Pool Programming

Dear Experts,
In Module Pool Programming, if we write LOOP AT SCREEN we can see and modify SCREEN-ACTIVE, SCREEN-INVISIBLE and other fields. But where we can modify Data Type and Other Attributes of the field dynamically?
Thanks in advance.
Regards,
Kumar

Hello Kumar,
you can not change data type of a screen field dynamically. What you can change is an output length of a field. This can be done changing the value of SCREEN-LENGTH.
Regards
Adrian

Total screen shots for module pool programming

Hi Abapers,
Any one could send me the screen shots for the module pool programming with multiple screens.
Thanks in advance.
Regards
Yubi

You can check the transaction ABAPDOCU for sample programs..
Check the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
Also chk this thread.
Urgent: : Requiremnt on module pool

Function module / table which lists screen numbers in module pool program

Hi everyone,
I wish to make a list of all screen numbers used in my module pool program Is there any FM / table which maps module pool program name with all the screens used in it?
For example, if my module pool is SAPMZPROG and it has screens 9001, 9002 and 9003, then I want to have a report as follows:
Input to the report (selection screen): SAPMZPROG
Output:
9001
9002
9003
Thanks,
Shailesh

Hello
Try tables D020S, D020T

How to save a varaints in module pool programming

Hi All,
How to save a varaints in module pool programming.
Thanks in Advance.
GS.

Hi,
Forgot my previous reply.
Just now I checked.
Create transaction[say.,zzz_test1] using SE93 [choose the option Program and screen] for your module pool program.
Then use SHDS transaction to create a variant[say zzz_v1] for the transaction you created above.
Then use SE93 [choose the option Transaction with Variant] to create another transaction zzz_test2 by mentioning the module pool program name and zzz_test1 transaction which you created and zzz_v1 variant which you created.
Then if you run the transaction ZZZ_test2,then you can see the variant values.
I created just now all these and it works.
Hope this is clear.
If not,get back.

How to insert Logo in module pool programming

Plz any one can explain me that how we will inseart Logo on screens by using module pool programming (in GUI programming) .

Hello.
I'll give you an example of inserting a personal photo in UI programming. Hope it helps you.
First of all, in your screen (painter), insert a custom control and give it a name (PHOTO in my example).
Then, in your screen PBO, insert a coding like this:
CLEAR handle.
CALL FUNCTION 'HR_IMAGE_INIT'
    EXPORTING
      p_pernr        = pernr
      p_tclas        = 'A'
      container      = 'PHOTO'
    IMPORTING
      handle         = handle
    EXCEPTIONS
      no_document    = 1
      internal_error = 2
      OTHERS         = 3.
CALL FUNCTION 'HR_IMAGE_SHOW'
    EXPORTING
      p_pernr        = pernr
      p_tclas        = 'A'
      handle         = handle
    EXCEPTIONS
      invalid_handle = 1
      no_document    = 2
      internal_error = 3
      OTHERS         = 4.
Regards.
Valter Oliveira.

Adding a screen element in Module pool

Hi Experts,
How to add a screen element in module pool programming?
Thanks,
Sudha...........

Hi sudha ,
To add screen elements in you module pool programming ,
i > Go the layout of the screen for which you want to have elements .
ii> Drag and drop the available elements from the left hand side .
iii> Be sure to have a name a name of the data elements that you have inserted .
iv>Check any dataelement is't showing red in color as red color signifies error .
v> Make sure to save and activate the layout.
Hope this would be clear .
Thanks
Lokesh

Regarding screen flow in MODULE POOL

Hi everyone,
my requirement is to cretae a module pool program. In between a program is submitted VIA a selection screen. That selection screen contains PUSH BUTTONS. If any push button is clicked one of the dialog screens of the module pool program should be called. Can any one tell me how can this be done.
Thanks in advance.
Regards,
Y.Gautham

write a Module in PAI of ur screen and call which ever screen u want to call or leave.
for e.g -
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
module USER_COMMAND_0100 input.
case ok_code.
when 'ENTER'.
clear ok_code.
leave to screen 200.
endcase.
endmodule. " USER_COMMAND_0100 INPUT

Screen problem in Module pool program

Similar Messages

Maybe you are looking for