Screen shows message "Checking printer. This process might take several minutes." Message has been

Screen shows message "Checking printer. This process might take several minutes."  Message has been there for over an hour and I can't clear it.

I cleared a paper jam over half and hour ago and then restarted my pc and ever since clearing the jam the message has been showing too:
"Checking printer: This process might take several minutes."
What can be done to get the printer to finish checking?

Similar Messages

  • I have tried to purchase Adobe Acrobat Professional XI this morning and payment (AED 1983.53) has been taken, I received a message stating there was/is a problem processing my order and that I should contact your customer service team in UAE.  Having trie

    I have tried to purchase Adobe Acrobat Professional XI this morning and payment (AED 1983.53) has been taken, I received a message stating there was/is a problem processing my order and that I should contact your customer service team in UAE.  Having tried this, I was met with a recorded message, in Arabic, and no options to speak to anyone.  I have found this process extremely frustrating and poor on your behalf.  Not providing any options to speak to an Adobe representative is equally annoying.  Please get back to me ASAP, as I need to use the product immediately.

    CS2 is very old and reached its "end of life" a while back.  So probably won't run on modern operating systems.  If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    Nancy O.

  • Can't activation, in the screen show message device unknown

    hi all,
    i have iphone 5 but can't use because activation error.
    my iphone 5 now installed ios 7.0.2 but can't activation, in the screen show message device unknown. please help.
    thanks

    Meanwhile I solved the problem myself: the layout screen had sunk to the bottom, just had to pull it up.

  • The update plugins page won't work it says "We've encountered an error. Please try your request again later" but this message has been coming up for days now..

    I installed Firefox4 and immediately had a problem with the addons manager page not displaying properly ( all the right hand side of the page was missing). I was advised to try a new profile which fixed it but now when I go to the page "Check your plugins for updates it keeps showing this message "We've encountered an error. Please try your request again later" but this message has been coming up for days now..

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • Here's a fix for "This item cannot be updated because it has been changed by another user or process"

    https://gallery.technet.microsoft.com/System-Center-Service-fca7af29
    A few months ago on the Technet Gallery, I submitted this custom control to be used on SCSM console forms. The purpose of the control is to eliminate the "This item cannot be updated because it has been changed by another user or process" error
    message that we all have seen at least once (a day :) ).
    The details are in the gallery description (along with installation instructions for existing forms and your own custom forms).
    Here's a "short" description (nothing I ever post here is short :) ): This is a custom control that can be applied to an SCSM form like the Service Request form or Windows Computer form or your own custom form built with the authoring tool or Visual
    Studio. When you click "OK" or "Apply" on the form, this control scans the form and Service Manager's database for any changes to the object you have open. If a property that _you_ have changed on the form was _also_ changed in the CMDB
    (by a workflow or another user), this control will present a dialog box letting you know what happened. It will also let you choose which value to keep (yours, theirs, or the original value).
    Just as importantly (and important in a greater percentage of cases), if a workflow changes a "background" property (like FirstAssignedDate) while you have the form open and you click OK, the control will detect the change and allow the form submission
    to go through while keeping your changes and the FirstAssignedDate change that the workflow made. You won't get an error message or even a warning. And most importantly, you won't lose your changes.
    That's where the "optimistic" part of the control's name comes from. It applies optimistic concurrency control to SCSM forms, while also providing an anti-collision interface for you to use so you no longer lose any of your changes.
    Furthermore, this control will work on related items that are opened in memory; for example, the activities on a Service Request. So if you change an activity's title while the workflow engine sets it in progress, you won't get an error. The activity will
    be in progress and will get your new title when you click OK or Apply.
    Lastly, (and I admit this part is getting into the deep inner workings of console forms) if your form loads a sub projection at run time (to the root object) this control will detect the load and treat that sub projection as if it were apart of the original
    form all along.
    I've gotten a little feedback about this control, but I'd like to get more since it's a work in progress. So, I'm announcing it here on the forums. Please give it a try and let me know if you have any questions. I'll be happy to answer them here. Thanks,
    folks!
    Oh, and to answer the most common question right away: It's free. There is no paid version or anything like that. This is something I built for the SCSM community.

    Great job! 
    Will definitely try it out. 
    Best regards,
    Marcus

  • Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

    Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

    Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

  • This message has been blocked because the HELO/EHLO domain is invalid

    Hi friends,
     We are using cisco ironport c170. Today we cannot send email for particular email id(domain). the error msg as below,
    Diagnostic information for administrators:
    Generating server: sgm.svc.com.sg
    [email protected]
    [182.**.**.51] #<[182.**.**.51] #5.0.0 smtp; 5.1.0 - Unknown address error 554-'5.7.1 [SPAM] This message
    has been blocked because the HELO/EHLO domain is invalid.' (delivery attempts: 0)> #SMTP#
    Original message headers:
    X-IronPort-AV: E=Sophos;i="4.97,682,1389715200";
    d="scan'208,217";a="3362301"
    Received: from abcct01.abc.com ([10.**.**.33]) by
    sgm.svc.com.sg with ESMTP/TLS/AES128-SHA; 19 Mar 2014 11:17:45 +0800
    Received: from abcMB01.abc.com ([fe80::99bb:22a0:nnaa:25cc]) by
    abcCT01.abc.com ([::1]) with mapi id 14.03.0123.003; Wed, 19 Mar
    2014 11:18:13 +0800
    From: "test" <[email protected]>
    To: "[email protected]" <[email protected]>
    Subject: Testing Email
    Thread-Topic: Testing Email
    Thread-Index: Ac9DIdjTsP9HUS2QTF6cZp6PKztE8g==
    Date: Wed, 19 Mar 2014 03:18:12 +0000
    Message-ID: <[email protected]>
    Accept-Language: en-US
    Content-Language: en-US
    X-MS-Has-Attach:
    X-MS-TNEF-Correlator:
    x-originating-ip: [10.**.**.210]
    Content-Type: multipart/alternative;
    boundary="_000_1329D1768D6FBE4A90657F034B26A7E217D7ADD5abcMB01_"
    MIME-Version: 1.0
    Thank you.

    The HELO/EHLO domain that your Cisco IronPort Email Security Appliance (ESA) uses is based on the hostname you configure for your delivery interface under Network -> IP Interfaces.  Please ensure that a valid hostname is configured.  This hostname should match the rDNS records for the public IP address used by your ESA.
    Once addressed - you should be able to take the domain in question, and attempt to telnet port 25, and attempt the standard SMTP testing...
    $ telnet mail.test.com 25
    Trying XYZ.XY.124.XX...
    Connected to mail.test.com.
    Escape character is '^]'.
    220 mail.test.com ESMTP
    helo foo.com
    250 mail.test.com
    mail from: [email protected]
    250 sender <[email protected]> ok
    rcpt to: [email protected]
    250 recipient <[email protected]> ok
    data
    354 go ahead
    Subject: Test
    TESTING
    250 ok:  Message 8102 accepted
    I hope this helps!
    -Robert
    (*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

  • Message retry count for the message has been exhausted

    Hi,
    I am using 'Custom Document Over Internet' with HTTPS as transport protocol. I have set the acknowledgement mode to Sync in order to receive the synchronous response. B2B is able to post the HTTP request successfully and in turn it receives a synchronous response and a MDN message. At the initial stage, after posting the request it shows the state as 'WaitForAck' for request message and for response and MDN messages, the state is completed.
    After some time when we check the state of request it is changed to 'Error' with the error message as 'Message retry count for the message has been exhausted'. We have not set the retry count and retry interval and so after retrying for 3 times with an interval of 120 minutes it is showing error state as it is not able to correlate the incoming response to the corresspoding request. We have tried the option of setting the Message id of the request in 'replyToMsgID' parameter of response header and tested the flow. But still I am facing te same issue. Please help me to resolve this issue.

    Hi Anuj,
    The property mentioned by NandaGopal has already been added in tip.properties file. I sent the B2B logs in debug mode and tip.properties file to your mail id. Please have a look into that. The result of opatch lsinventory command is
    Result:
    Installed Patch List:
    =====================
    1) Patch 9234704 applied on Fri Jan 15 16:41:12 GMT 2010
    [ Bug fixes: 8870866 9143036  ]
    [ This patch overlays patches " 8703410 " ]
    [ This patch needs patches " 8703410 "  as prerequisites ]
    2) Patch 8703410 applied on Thu Jan 07 17:56:08 GMT 2010
    Unique Patch ID: 11901808
    [ Bug fixes: 7652646 7497854 7664370 8708445 7661101 7007789 6352814 6802446 7665607 7641078 6496457 6013963 8330151 7305413 8619657 7460584 7529893 7458954 7020996 8393885 8210401 6329207 6740403 7126458 6511970 8783577 7379065 7230993 8704965 6774631 7198642 8309511 8392729 7661769 7605518 7479148 6733262 8349002 6736026 7322333 7242500 7239355 8746561 8344645 8451004 7645440 6747966 6369424 6737334 8339176 6774134 7046561 6412124 7210461 7506319 8630406 8235175 7258882 7184318 6453359 7456866 7673646 6043277 7457597 6769895 7193710 8239170 7668247 8404955 8612841 7261965 7132740 7485790 6518386 7305363 6852370 6433256 7673431 6764239 8360048 7501748 7379153 8281019 7498031 8216457 7046574 6875312 6754906 6656289 6417367 7658271 7556011 7000190 6979467 8594506 8691820 6852308 8475848 8518443 7600385 7211208 6732051 8524862 7461051 8263026 7609467 7379161 7672714 6353293 7157229 7594997 7211287 7034069 7563311 6822375 6640935 7359202 6769261 6919593 8601869 6029507 6974391 7139013 7518641 8605719 6817264 7501903 7496014 7576785 8666761 7130151 7322581 5523563 7680097 8508905 7241737 7660780 8480395 7660781 7191994 6924921 7672723 8432093 6800745 8703404 8540335 8507242 8608121 8217566 7481317 6639030 6200414 7529795 7354853 8475867 7376270 7303860 7016005 7678901 7368610 8992520 6881977 6016128 7033061 6397084 7672730 8703410 7709562 6449656 7045589 8508054 6491068 7378745 7643811 7435853 7615836 8707416 6447557 7379042 6940476 7670634 6950383 6764273 6962327 7478322 8546454 7157324 8871403 8862082 7184219 7672744 7164618 7672745 7230184 7576730 7590301 8746541 7261863 8327427 6769430 8295683 7526186 8298731 6414280 6139955 6646997 7692853 8233048 6794296 7457066 8552373 8225241 7706387 7204022  ]
    3) Patch 4601861 applied on Fri Nov 14 04:24:08 GMT 2008
    [ Bug fixes: 4601861  ]

  • Can I tell at server-level if a message has been displayed in the Reading Pane in Outlook?

    Hello,
    Does anyone know if there are any traces at server-level (Exchange 2010) if a message has been displayed in the Reading Pane of Outlook 2010? The message would still be marked as Read in the recipient's mailbox.
    Thanks,
    - Alan.

    Hi,
    If you want to know whether an email has been read by recipient, you can either request a read receipt or enable the tracking for read status for messages by using the
    Set-OrganizationConfig –ReadTrackingEnabled:$True command.
    A related blog for your reference.
    Question: Is it possible to check if a message has been read, even when the sender forgot to check the box “Request a Read receipt for this message”?
    http://blogs.technet.com/b/ilvancri/archive/2010/04/13/question-is-it-possible-to-check-if-a-message-has-been-read-even-when-the-sender-forgot-to-check-the-box-request-a-read-receipt-for-this-message.aspx
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Hi, for Iphone tips page "see when a message was sent " , then how do I know that the message has been read?

    Hi,
    for Iphone tips page "see when a message was sent " , then how do I know that the message has been read? Thanks  

    Hi Bhavesh,
    Please see my replies inline:
    > 1. If i remember your ealier thread correct also, I
    > would suggest that you drill down in Where Did the
    > Error Occur. Instead of no restriction, select
    > Adapter Engine and also your Corresponding Adapter
    > and then trigger the error message and check if the
    > alert is triggered.
    When I click on "Where did the error occur" -> "Adapter Engine", I do not have a choice of errors from the dropdown. I only see one option "*".
    Is this right?
    > 2. ><i>When I click on "Alert Inbox" ->
    > "Subscription", I get a message "The table does not
    > contain any entries". Is this correct?</i>
    >
    > Yes this is correct. You have defined in your alerts
    > as the option as FIED RECIPIENTS. You also have
    > options like Reciepients via User Role and
    > Subscription Authorization in ALRTCADTDEF.
    >
    I see.
    I've also managed to overcome this problem by selecting "Subscription Authorization" in the Alert Category Definition page, and entering SAP_XI_MONITOR as one of the roles.
    After that, I am able to see a the alert category defined. By default it's already subscribed, because I'm using the same user - PISUPER.
    I saw in another post that the option "Suppress Multiple Alerts of this Rule" should be left unchecked. I tried that, but I still do not see any alerts raised in ALRTDISP.
    What did I miss?
    Please help.
    Thanks.
    Ron

  • The message has been rescheduled  .(Manual restart for version)

    Hi
    What is the exact meaning of the following status in SXMB_MONI -
    Manual restart for version ( symbol forward arrow )
    The message has been rescheduled.
    i am getting this status when i have restarted a message from SXMB_MONI
    Any idea why it is not getting processed to success
    what may be the resons ?
    i can see the Q status as red dot (message has errors)
    thanks
    Prashanth

    thanks ...
    so is it a restart of the queues ? (and not the message)
    Is this a task that xi admins normaly do ?
    when i click on the queue it is specifying "not authorized to run the transaction SMQ2"
    So i guess i can request the admin for restart of the queue
    I assume messages wont get lost during queue restart
    thanks
    Prashanht

  • My macbook pro (lion 10.7.2) takes several minutes to connect to the internet after waking from sleep.  Is there any way to make this instant?

    Hi
    My Macbook Pro 15 inch takes several minutes to be able to connect to the internet after waking from sleep.  Does anyone else have this problem and is there a fix?
    Alan

    coxorangepippin wrote:
    The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
    What that means is that is can't be used with Lion 10.7.  PowerPC was the chip Apple used up until 2006 when they switched to Intel.  At that point, they created the Rosetta emulator to allow for PPC support for 5 years.  They finally dropped the support with the release of Lion.  It will only work with OS X 10.6 or earlier.  The other option is to purchase a new GPS, which can be had for $100 for a decent one.

  • Bought Premier Elements yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until

    Bought Premier Elements 13 yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until my pw is recognized. Accept agreement. Agreement screen disappears and I'm back where I started. Try to open video clips with editor again and get the same demand to log in. Please advise asap. thx

    Oldcameraman
    Please do not duplicate a thread. The threads are answered as soon as possible. We are not Adobe. Just user to user.
    I have answered your most recent of the duplicates
    Premier Elements 13 Organizer Works. Editor doesn't. Log in doesn't work
    It is uncertain just how far we can go to help you since you do not appear to have Premiere Elements any
    longer.Seems you demanded a refund from Adobe Chat, got it, and now are left with a non purchased program which I
    am not sure can be used.
    Duplicates tend to confuse the person asking the question as well as those attempting to reply. As I suggested in the
    above mentioned thread, try to sort out your situation with Adobe via its Adobe Chat.
    ATR

  • When i ask my macbook air to print it tells me it is looking for my printer it takes several minutes before it finds it and then prints, why is that as my wife is connected to the same printer in the same way (bluetooth) and hers prints straight away

    As per my question, when i ask it to print it tells me it is looking for my printer this takes several minutes before it prints.  my wife is in the same room using an imac also using a bluetooth connection to the same printer and hers prints immediately.  why is this.

    Perhaps you could try this to resolve your issue:
    *How to Reset the Printing System*
    1. Open System Preferences > Print & Fax
    2. Move your mouse over the Printers list
    3. Hold down the Control button and click the mouse (or right click if supported).
    4. Click "Reset printing system ..."
    5. Restart your Mac
    This will remove your print queues but not your printer drivers. So you will only need to add your print queues again.

  • Stop the "thank you; your message has been sent"

    I have a interview handler/voicemail account setup to gather information from customers. I wanted to add my own closing statement instead of the standard "thank you; your message has been sent"; I added a call handler to play my own greeting and then configured the interview handler to transfer to the call handler and then hang up, but before it gets to the call handler, it still plays the "thank you...". How can I stop that from playing?
    Randy

    That prompt is actually associated with the message recording converation which is used by call handlers, subscriber and interviewers - you can't turn off the prompt for just one specific interview handler.
    You can turn it off system wide by replacing the promot in question with a silent (empty) prompt, but this would then remove that prompt in all cases where a message recording was terminated.

Maybe you are looking for