Screen stuck on error message.

My phone was freezing, like it does once in a while, so i took the battery out to restart it and hopefully fix whatever was making it freeze stop. when i put the battery back in it went to the normal loading screen with the timer and everything and after a few seconds went to a white screen that only says "JUM Error 517" and then gives the option to reset the phone. pleasssse someone have something that can help!

Use JL_Cmder to wipe the device. Instructions here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If that doesn't give you a "507" error then do this:
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
Once you get the device to display 507 then reload the OS by following the instructions here (don't worry about what carrier the OS comes from--it makes no difference):
http://www.blackberryforums.com/general-8100-series-discussion-pearl/233414-new-8130-os-v4-5-0-186-c...
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

Leave to screen 0 with error message

Hi experts,
how can I break the execution and leave the to the initial screen with an error message?

Hi,
you can use LEAVE SCREEN or LEAVE TO SCREEN n
and for the message, you can use
MESSAGE ID mid TYPE mtype NUMBER num.
where mtype is 'E' or 'A'
Read the documentation for these instructions.

Rejects new cartridges and stuck in error message mode

Mac OS X 10.6.8 My HP Officejet Pro 8600 Plus won’t accept new printer cartridges (not the originals). It also is stuck on an error message stating there’s a problem with ink cartridges and suggests turning printer off and on. This has been done numerous times with no change. Am trying to get to Setup menu to try resetting printer defaults. Have also tried unplugging machine for 30 minutes with cartridges removed and restarting, then replacing cartridges. It remains stuck on error message. Wireless system.

Hello Janedra, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into cartridge issues, I would like to try and assist you with that today!
Are the cartridges you are using HP genuine cartridges? Have they been refilled or remanufactured?
I would suggest running through this document: An 'Ink Cartridge Failure,' 'Incompatible Ink Cartridges,' or 'Ink Cartridge Problem' Error Message ....
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Recently whenever i plug my ipod nano to my pc the pc shuts down to a blue screen then a black screen then windows error message i have the latest version of itunes and software i just got this dec 2012

as of today when i plug my 7th generation ipod that i just got for christmas 2012 my pc shuts down to a blue screen with alot of writing then to black screen with alot of writing then to an all black screen then and windows error message my computer is ingood condition no malicious malware and has been clean i need help
thank ycj

let me get back with the answer with what the messages say on the blue screen and the black screen if i can read them fast enough before it shuts down i have windows 7 professional

TS3297 When I go to the iTunes store, all I get is a black screen. No error message, just won't open. I have tried going to iTunes on another device and it works fine. Help!

When I go to the iTunes store, it won't open. I don't receive an error message of any kind, just a blank black screen. I have tried to access the store on other devices in my home and it works. All my music shows up in my library, but nothing will show up when I go to the actual store. I have updated my software and made sure the date/time are correct. Everything else seems to be working fine on my computer. Not sure what is going on, but would really appreciate any help you can give. Thanks!

I'm expreriencing the same conditions with the same environment. Windows 8, iTunes-64 11.1.2.32, iTunes Store with a processing bar up to 80 +/- and the POPUP MESSAGE OF "iTunes stopped working. The error ...."
I UNINSTALLED, iTUNES WITH NO POSITIVE RESULT. I CHECKED THE FIREWALL AND IS THE SAME DEFINITION AS THE PREVIOUS ITUNES VERSION.
My iTunes StoreS from my iPhones ARE OK.
I'm spending a lot of time of research for WINDOW'S iTUNE with no solutions....

Blue screen of death - Error message included

I have searched on the forum and found nothing exactly like my situation. I am running Labview 7.1 in a test bay through the NI chassis with an embedded controller. The system basically reads up to 100 RTD, and 224 pressure readings and then writes them to a network computer. Every so often, we get the "blue screen of death" when running the program. Sometimes there are problems with the network computer, so there is am option inside the program to send all the data to the local hardrive. This is basically how we check to see if the problem is related to the network, or if it is the Labview system. However, the network has never been the cause of the blue screen of death(since we have also received the blue screen while writing to the local hardrive). Furthermore, the system only gives the blue screen ever so often, not all the time. The error message is attached, and seems to be memory related. I should also mention that we run two labview program at the same time, one controls a series of valves, and the other displays all the data be recorded the the network computer. After about 10 reboots, as a desperate attempt, we only ran the valve program, and it seemed to work, but it may just be luck. Another attempt was and option in windows(XP) called "paging" which we turned off. Last I know the system was working, but under the above mentioned conditions which will not work for day to day testing.
Any help would be greatly appreciated.
Thank you
Attachments:
Error message.xls ‏14 KB

Hi,
I found a post that looks like it might be a similar issue. The first link does not seem to be valid any more. Below are three more external links that also describe this error message.
http://www.5starsupport.com/info/stop_error.htm#7a
http://www.osronline.com/ddkx/ddtools/bccodes_2vjb.htm
http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/prork/prhd_exe_qofl.mspx?mfr=tru...
I hope this helps!
Regards,
Missy S.
Calibration Engineer
National Instruments

IPad with retina is stuck on error message that iPad is unable to back up. When hit ok, the message does not go away. Cannot power down. Don't have computer to sync with iTunes. Now what?

My coworker has a fairly new iPad with retina display. She has an error message that the iPad has not been backed up and needs to back up when locked, on wifi, and connected to a power supply. It has an ok button to acknowledge the message. Every time she hits the ok button, the error message remains. She is unable to power down because the error message stays at the top and disables the ability to use any other touch portions of the screen. She tried using Siri to reboot, but Siri was of no help. She just kept saying that she does not wear boots. Holding the power button down for an extended period also did not help. She does not have access to the computer that has her iTunes on it, so she cannot sync it via cable. She also does not want to do a reset because she has several photos that she does not want to lose. What can she do?

Try holding the Home and Power keys at the same time for approx 10 seconds or until the Apple logo appears, this will 'reset' the device - it won't lose any data doing this, let us know how you get on.
Regards,
Steve

Stuck Key & Error Message

Thinkpad T410i windows 7. Getting a stuck key 4D message on startup, can boot just by pressing escape twice, but then getting a persistent and intermittent / random error message pop up. The error message is blank and contains no information other than the word Error. My keyboard seems fine, no jammed keys.
Any ideas?
Solved!
Go to Solution.

Think I found the solution myself: seemed to be some kind of conflict with MobileMe control panel, so maybe something to do with syncing and nothing to do with the keyboard. Uninstalled the programme and the problem is solved.

For a call screen when displaying error message screen become disable

Hi,
For a call screen when i am giving a error message all the other fields are getting disabled and by enter also they are not getting enabled.
can you please suggest how to get this in enable mode with the error message.
the error message is given if we are trying to save the duplicate record.
Please suggest <removed by moderator>.
BR,
Rajesh
Edited by: Thomas Zloch on Nov 18, 2010 4:18 PM - priority normalized

Try:
message 'blabla' type 'S' DISPLAY LIKE 'E'.
Edit.
But you should validate the key fields before even pressing the SAVE button. Use CHAIN..ENDCHAIN for the key fields.

Blank screen rather than error message

I've written some pages using htp which I am using rather than htmldb and calling using the format http://location:port/htmldb/pkg_test.test and this is working well but if there is an error all I get is a white screen rather than anything helpful.
Are the errors written to a log somewhere or is it possible to show an error page displaying the error? I'm just testing on my own so I don't need to worry about what a user would see.
Cheers,
Greg

Hi Greg,
I have a few points here ...
1) You could use a generic exception handler for all procedures that are called directly via url, like this:
CREATE OR REPLACE PROCEDURE test_error IS
   l_i   NUMBER;
BEGIN
   -- should raise ORA-01476: divisor is equal to zero
   l_i := 1 / 0;
EXCEPTION
   WHEN OTHERS THEN
      HTP.p (SQLERRM);
END;
/2) Aside from that you should be able to see the error messages when raising the log level:
Re: http error log
3) Also, when testing the htp/htf output, you might use Raptor ( http://www.oracle.com/technology/software/products/sql/index.html ), owa output is displayed there as well. Whow, early adopter release 3 is available!!!
4) In addition to that you might even use sqlplus to output the result of your stored procedures like this:
set serveroutput on
begin
    owa.init_cgi_env( 0, owa.cgi_var_name, owa.cgi_var_val );
    htp.p('hello world');
    owa_util.showpage;
end;
/Please be aware that you can only access the web context in scenario 1) and 2). I mean access to the CGI - environment like owa_util.get_cgi_env('REMOTE_USER');
Well, in 3) and 4) it is still possible to set the environment manually ;).
Hope that helps,
~Dietmar.

Laptop will not boot, stops at Toshiba screen then an error message. Can't access BIOS

I receive the following error message:
For Atheros PCIE Ethernet Controller v2.2.7(11/02/10)
Check cable connection!
PXE-M0F: Exiting Intel PXE ROM.
No bootable device -- insert boot disk and press any key
Before it first shut down, there was some blue screen with a message I was unable to read in time. I turned it back on and got the above message. I have done some research and it sounds like some kind of hard drive problem. I've checked the hard drive connection and it's fine, the same message appears. I also saw that you can access BIOS(not sure what this is exactly, I've never used it) and then somehow recover, reset or change a boot setting that may have changed by itself. I can't access it though. I have tried F8, I have tried pressing escape as soon as the red Toshiba screen comes on, and also tried holding it and releasing when the tone sounds, then pressing F1 but all I get is a tone and no screen.
It's about to be finals week and I really need some help getting this fixed...preferrebly without having to by a new hard drive because all kinds of homework, papers and study info is on this computer. I haven't even had it for two years yet. I can attach a picture of the screen if needed but it's just a black screen with the above message.
Thanks for any help!
EDIT: Satellite L655-S5150 and Windows 7
Solved!
Go to Solution.

It does sound like a hard drive related issue, be it a virus, or physical failure. If you have fast boot enabled, you will need to hold down F8 while you power up, as just tapping F8 at the BIOS splash screen will not work. If you are unable to recover that way, hopefully you created recovery media when you first got the laptop(it would have prompted you in the action center).
If that was not done, you could always swap in a new hdd to get the system up and running, and get a eSATA to USB cable to get all of your info off your old drive.
Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

BLUE SCREEN WINDOWS 7 ERROR MESSAGE

BLUE SCREEN FOR WINDOWS 7 64 BIT
COPY OF EXACT ERROR MESSAGE - SEE BELOW
ANY IDEAS OR SOLUTIONS HOW TO FIX IT ??
Suddenly My Toshiba Satellite L775 Laptop Developed New START UP PROBLEMS. I Saved The Exact Error Message I Got. Please Advise A Solution:
WINDOWS HAS RECOVERED FROM AN UNEXPECTED SHUTDOWN
WINDOWS CAN CHECK ONLINE FOR A SOLUTION TO THE PROBLEM
HIDE PROBLEM DETAILS*** CHECK FOR SOLUTION***CANCEL
Problem signature:
Problem Event Name:   BlueScreen
OS Version:                   6.1.7601.2.1.0.768.3
Locale ID:                      1033
Additional information about the problem:
BCCode:                       f4
BCP1:                            0000000000000003
BCP2:                            FFFFFA80066513E0
BCP3:                            FFFFFA80066516C0
BCP4:                            FFFFF800031CB470
OS Version:                   6_1_7601
Service Pack:                 1_0
Product:                        768_1
Files that help describe the problem:
C:\Windows\Minidump\022313-39093-01.dmp
C:\Users\ADM\AppData\Local\Temp\WER-372452-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt

Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION
Please attach the following file to your reply.
   C:\Windows\Minidump\022313-39093-01.dmp
Always tell us which Satellite L775 you have. See the label on the bottom.
-Jerry

How to go back to screen after an error message?

why does the system exits the program when i use the error message?

Hi,
If you have got the answer then kindly close the thread to avoid confussion.
Thanks in advance
Pooja

Sometimes when using the trackpad, 3 finger swiping left/right resets my mac and i get a white screen with an error message, anybody know why this is?

Been happening for a while now and I've no idea how to fix this, sometimes I can go days/weeks without it being a problem but at times one swipe using 3 fingers resets the mac with the error message coming up.... very annoying
help will be appreciated
thanks

http://img.photobucket.com/albums/v293/Aines/photo3.jpg
http://img.photobucket.com/albums/v293/Aines/photo1.jpg
http://img.photobucket.com/albums/v293/Aines/photo2.jpg
That's what I always get, sometimes I'm just using safari sometimes I may be on football manager but thats the message I receive when it just shuts off
thanks

20" imac won't restart after rebooting under bootcamp running Windows XP. I get a black DOS screen with an error message.

My imac has been running without problems under OS X Snow Leopard and bootcamp running Windows XP for a long time. I had received a Sony MP3 player and wanted to install the software on my computer. At the time I had a CD in my drive slot because I was getting ready to install some brother's software for a printer I wanted to use. I restarted my imac under bootcamp and started installing the Sony software in Windows XP. I was having problems with the install and decided to restart XP to see if that would help. It's been several days since this originally happened so I'm not of sure of any more specifics at this point other than I've had to use windows machines for a long time and know that basically when in doubt "restart".
When my imac was restarting I heard everything spinning up, the white light came on, but I heard no chime, a blue screen came up for about 15 to 30 sec. and then it went to a black screen with DOS characters giving the following message:
Windows could not start because the following file is missing or corrupt: <Windows root>\system32\hal.dll. Please re-install a copy of the above file.
I do have a copy of Windows XP, but my first problem was that I still had a CD in the slot and it would not eject. I tried every keyboard combination I could find including: eject button, F12 and holding down the mouse button at start-up and nothing worked. I also tried every other start-up keyboard combination I could find at Apple Support jut to see if I could get my imac to start up under OS X . I finally went on youtube to find out how to remove the CD. I ended up opening up my imac and taking off the cover of the CD drive to remove the disk. After putting everything back together I put in my Windows CD and tried restarting again. The exact same thing happened and I ended up at the DOS screen. Then I thought maybe my keyboard wasn't working so I replaced it with a new one. Same result. I also thought to plug both of my apple keyboards into my windows 8 laptop (hate it!) to see if they worked there at all. They both did so I'm sure the keyboards are not the problem.
At this point, since I do now have a windows 8 laptop (hate it!) there is no remaining reason for me to keep a bootcamp partition on my hard drive. My question is where do I go from here? I have a current time machine back-up on an external hard drive and I have my install CD for OS X Snow Leopard. How do I get my imac back up and running? Thanks.

Can you OPTION boot? If so, then choose the OS X volume to boot back into OS X. From there you can use Boot Camp Assistant to remove the Windows volume and restore the drive.
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
      "OPTION" key.
3. Release the key when the boot manager appears.
4. Select the desired disk icon from which you want to boot.
5. Click on the arrow button below the icon.
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

Screen stuck on error message.

Similar Messages

Maybe you are looking for