Script to remove Install Application and reboot

Hi All,
I got 600 PC's and need to remove one application (got different modules installed) from the PC's and reboot. then i can install the new version .
I have installed this application using GPO. But some related modules installed by manually.
First need to list all the install applications start by the name and remove from the PC ( registry etc)
As

Hi,
Based on my research, we can also use PowerShell cmdlets to remove installed applications, here are some related links below for you:
App Installation Cmdlets in Windows PowerShell
http://technet.microsoft.com/en-us/library/hh856045.aspx
Removing Windows 8.1 Built-in Applications
http://blogs.technet.com/b/deploymentguys/archive/2013/10/21/removing-windows-8-1-built-in-applications.aspx
Sideload Apps with DISM
http://technet.microsoft.com/en-us/library/hh852635.aspx#RemoveApps
In addition, here is a scripting forum below if you’d like to get more scripting support:
The Official Scripting Guys Forum
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Similar Messages

My mac is installing yosemite and reboots but then there is no installation and the old system (mavericks) is still there?!

my mac is installing yosemite and reboots but then there is no installation and the old system (mavericks) is still there?!

Re-downloading of films is currently only available in the US (due to film studio restrictions), and not all films can be re-downloaded there as not all film studios are allowing it. Have you not got a copy of them on your computer and/or on a backup ? If not then you can try contacting Apple, but they are under no obligation to let you re-download them : http://www.apple.com/uk/support/itunes/contact/

Why, after installing application and tapping on it, it never start ?

why, after installing application and tapping on it, it never start ?
it quit to the main screen

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy... See Here...
Troubleshooting applications purchased from the App Store

I installed FF4 and rebooted as directed. After 2 reboots I still get a message that I need to reboot. Can't remove with control panel due to same message

On Windows XP. Downloaded and installed FF4. Rebooted then tried to open FF. I got a message that I needed to reboot before installation would be complete. I rebooted again with same outcome. Tried to uninstall FF4 via the control panel but got the same message. Help please.

On Windows XP. Downloaded and installed FF4. Rebooted then tried to open FF. I got a message that I needed to reboot before installation would be complete. I rebooted again with same outcome. Tried to uninstall FF4 via the control panel but got the same message. Help please.

Cannot install applications and/or drag and move files

I am having issues in Mountain Lion where it is not allowing me to install applications by dragging them to applications or dragging files to move them.. Anytime I do this, it gives me a green circle below the icon with a white plus sign and does not allow me to drag/install the file.. Any ideas?

Can anyone help please?

Computer shut down uninstalling old Thunderbird,while re-installing, it keeps on saying it must remove old Thunderbird and reboot, nothing happens - HELP

Tried removing older version, computer turned off while doing so. Program no longer appears but when attempting to install new version, I keep getting the message taht teh old version must be removed by re-booting,. I re-boot but still blocked from a re install

''re : Tried removing older version, computer turned off while doing so''
How can you uninstall something with the computer switched off?
Have you done this?
In Windows to uninstall a program:
* Control Panel > Programs & Features.
* Select Mozilla Thunderbird
* click on uninstall

TS1702 downloaded Jeopardy HD from the App Store. Program loaded but upside down on screen. Deleted and re installed application and it still loaded upside down. This is the only app that has done this. Re-started ipad and re-loaded and still doing th

Anyone had trouble loading Jeopardy HD App? Mine loaded upside down. Tried everything, re-starting, re--loading, all to no avail. Have to turn screen upside down to play.

The App Store is scanning the Mac and finding purchased apps in the Applications folder. It then checks against the list and finds that they are old versions and prompts for an update.
All that is required to install an app is a Apple ID and admin rights on the target mac. The apps she is installing are wrapped in DRM which identify her as the owner, but the App Store doesn't care, as she is entitled to install them on your Mac. But it reads her ID from the wrapper and thus prompts for her password to do the update.
I'd personally suggest that just one of you has admin rights and does all the purchasing off the App Store. You could remove all her apps from the mac, but you'd then need to purchase them again to consolidate them into your ID.
Or you could just get her to do the updates!

I need to install application and driver for Nomad IIc but computer says I'm not connect

I tried downloading the application, driver, and plug-in for Nomad IIc. When I try to install the driver my computer says my player is <EM>not</EM> connected but my player says it <EM>is</EM> connected. Help!

Bfd96
Did you download the correct driver and appllication?
Check that you have the following files.
. Driver - Drv_nm2.exe
2. MediaSource application - CMS_PCAPP_LB_2_03_29.exe
3. Nomad Pack - CMS_N2Plugins__00_0.exe
Do not connect the player when installing the driver. You will be prompted to connect the player when the installation is near to completion.
After which, install the MediaSource application follow by the Nomad Pack.
Jason

WIndows Won't install! and reboots instead!! HELP!!

The current Windows I am running on is: Windows 32 bit OEM
I am trying to install Windows 10 64 bit because I want to upgrade from 32 bit to 64 bit.
I have already installed windows 10 ISO and mounted onto my usb and it works
BUT! my Problem is when it loads, I see the logo and the loading sign for 10 sec. than its has a quick blue box thing saying:
"there are problems on your computer and now it will restart"
it won't let me enter into the installation page? if I took the usb out windows 7 still works.
I am trying to run a clean installation on my hard drive, my hard drive is 500gb and I have 10gb ram running
Should I manually re-format my hard drive before I run the windows 10 64 bit installation.
Please help ! if anyone had run into this problem before, please help me ! DX

Paul Adare is correct in saying that you cannot "upgrade" from 32-bit to 64-bit. You can, however, backup your files and reload them onto your PC.
Given that you are able to boot Windows 7 after the failure to install Windows 10 Technical Preview, it is apparent that you are not formatting the drive during your clean installation. There are a number of potential issues an existing configuration can
cause, such as preventing Windows Setup from registering boot files, modifying partitions, or moving an existing installation and data to the windows.old folder. I would recommend removing the partitions from your drive (note: this will erase any data remaining
on the hard disk) during installation to ensure that Windows Setup has a fresh hard drive to install to. If you continue to experience errors, two other factors to take into consideration are:
Does your system use a storage controller that requires loading a driver during Windows Setup?
Is the hardware malfunctioning? Do the hard disk and memory pass testing software like Windows Memory Diagnostic or chkdsk?
Reference
this article for more information.
Hessam
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet

Some of the pre installed application and the defu...

I downloaded a theme from ovi store.and when i apply the downloaded theme to my nokia c2-00 something went wrong.the theme put a question mark "?" on some of the buttens of the phone's menu and hence i deleted this theme from my phone but some of the defualt applications corrupted and the defualt theme was lost or disappeared.can anyone tell me how to get them back?

Check if you have the latest Firmware on your Phone. You may do that thru' Nokia Suite . If any update is available do that, else you may re-install (refer the attachment) the existing firmware and see if the problem gets resolved.
If no change the you need to get the Firmware flashed at Nokia Care
Attachments:
Nokia Suite 3.7.22.png ‏106 KB

How to create a script logic using two applications and some conditions?

Hi All,
I am using BPC 7.0 MS
I have two applications, one called RATE (Dimensions: Category, InputCurrency, Rate, RateEntity, Time) and one called GYP (Dimensions: Category, Entity, PL, Producto, RptCurrency, Time. In the GYP application for Revenues. I have the followings products:
Product code
1-808-912-433
3-208-345-542
11-869-789-946
13-456-786-890
I need to calculate a discount using the first digits to identify the product: 1, 3, 11 and 13, based on some percentages that are in the RATE application.
I have an element in the RATE application for each one of them.
DPC1
DPC3
DPC11
DPC13
What I am trying to do in the script logic is:
*XDIM_MEMBERSET PL=Revenues
*XDIM_MEMBERSET PRODUCTO=<ALL>
*XDIM_MEMBERSET ENTITY=<ALL>
*XDIM_MEMBERSET CATEGORY=Budget
*LOOKUP RATE
*DIM D1:RATE ="DPC1"
*DIM D11:RATE ="DPC11"
*DIM D3:RATE ="DPC3"
*DIM D13:RATE ="DPC13"
*DIM RATEENTITY="Global"
*DIM INPUTCURRENCY="VEB"
*ENDLOOKUP
*WHEN PL
*IS Revenues
*REC(FACTOR=LOOKUP(D1), PL=Discount)
*ENDWHEN
*COMMIT
In the WHEN area, i would like to create some condition to identify the product and assign the correct percentage to it but i don't know how to do it?
Do you have any suggestions?
Also, because i need to key the values in the RATE application for the discounts, the logic should be run from this application?
Using RUNLOGIC like this:
*RUNLOGIC
*APP GYP
*LOGIC Discounts
*ENDRUNLOGIC
Best regards,
Luisana

Hi Nilanjan,
Thanks for your prompt reply.
The special characters ("-") cannot be used. The product codes use the special character ("_").
I understand what you said about the property for the dimension Product but not for the dimension Rate. I have the lookup that has the four elements (DPC1, DPC11, DPC3, DPC13). It is not supposed to get the data from those elements directly when using the lookup?
The script logic is still not working. I created the dimension property in the product dimension and the new script logic is as follows:
*XDIM_MEMBERSET PL=Revenues
*XDIM_MEMBERSET PRODUCT=<ALL>
*XDIM_MEMBERSET ENTITY=<ALL>
*XDIM_MEMBERSET CATEGORY=Budget
*LOOKUP RATE
*DIM D1:RATE ="DPC1"
*DIM D11:RATE ="DPC11"
*DIM D3:RATE ="DPC3"
*DIM D13:RATE ="DPC13"
*DIM RATEENTITY="Global"
*DIM INPUTCURRENCY="VEB"
*ENDLOOKUP
*WHEN PRODUCT.TYPE
     *IS 1
          *REC(FACTOR=LOOKUP(D1), PL=Discount)
     *IS 11
          *REC(FACTOR=LOOKUP(D11), PL=Discount)
     *IS 3
          *REC(FACTOR=LOOKUP(D3), PL=Discount)
     *IS 13
          *REC(FACTOR=LOOKUP(D13), PL=Discount)
*ENDWHEN
*COMMIT
Could you let me know what i am doing wrong?
The calculation i would like to get is: Discount = Revenues(GYP) X DPCx(RATE)
Also, when I sent the data from the rate application I get the message "ExecuteBaseLogic::invalid application:*APP GYP". I am using a RUNLOGIC in the application RATE with the following code:
*RUNLOGIC
*APP GYP
*LOGIC Decto_en_vtas_pilot
*ENDRUNLOGIC
Kind Regards,
Luisana

Removing Installed Applications

I can't seem to figure out how to uninstall applications that I've installed on my iPod Touch 2G. I'm sure there an easy way, but i can't seem to figure it out. Any help?

Hi,
Either do it in iTunes, uncheck them and synch, or "on the fly", hold an icon until they all "jiggle" then touch the "X" to delete whichever you wish, press home to return to normal.
Regards,
Dud.

Software update group install deadline and reboots for them

If I make a group of updates available at 2am Sunday, with the deadline set to 6am Sunday, I have two questions.
This means for any machines turned on they will install at 6am and for any other machines checking in after that they will install immediately, correct?
how do i find out when SCCM will force the reboot of the machines to complete the installation? is it 24 hours by default or is that set somewhere I should double-check?

Correct to your first question although there is a random, up to 1 (or 2, I never remember) delay after the deadline to avoid swamping the infrastructure.
It will initiate the reboot countdown after the last update is installed and then enforce the reboot at the end of that countdown. By default, the countdown is 90 minutes. This can be changed in a client settings package.
Jason | http://blog.configmgrftw.com

Installing applications and/or software

I'm new to Mac.
When I install some software or downloads I get a dialog box that says "select an application to copy to" or something like that. Nothing that I select works to accept the downoad or program. What do I do next?

Hi and Welcome to Apple Discussions!
New to Mac? Well, if you are used to the Windows operating system then this link is a great user guide for "switching" from Windows to the Mac OS:
http://www.apple.com/support/switch101/
When you download software, are you talking about 3rd party software, meaning non-Apple? If you could post the url here so we can see which software you are referring to that would help.
Carolyn

Operating system install fails and reboots SCCM 2012 r2

Image was working and pushing out just fine then stopped. Might have been when we upgraded from adk8 to adk8.1 not sure.
Below is log from client machine. Very new to Sccm and I don't know what I am to look for. Variables.dat is red and failing but I don't know what that is or where I check that data? Nic is working as I can map to share and copy off
log files so I don't believe it is a nic issue.
Thanks for any help!
==============================[ TSBootShell.exe ]============================== TSBootShell 8/25/2014 10:20:04 AM 868 (0x0364)
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL' TSBootShell 8/25/2014 10:20:04 AM 868 (0x0364)
Debug shell is enabled TSBootShell 8/25/2014 10:20:04 AM 868 (0x0364)
Waiting for PNP initialization... TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
RAM Disk Boot Path: NET(0)\BOOT\X64\IMAGES\BOOT.SHQ0003D.WIM TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
Booted from network (PXE) TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
Network(PXE) path: X:\sms\data\ TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
Found config path X:\sms\data\ TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
This is not a fixed non usb disk TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
Booting from removable media, not restoring bootloaders on hard drive TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
X:\sms\data\WinPE does not exist. TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
X:\_SmsTsWinPE\WinPE does not exist. TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
Executing command line: wpeinit.exe -winpe TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 8/25/2014 10:20:05 AM 868 (0x0364)
The command completed successfully. TSBootShell 8/25/2014 10:20:05 AM 868 (0x0364)
Successfully launched command shell. TSBootShell 8/25/2014 10:20:05 AM 868 (0x0364)
The command completed successfully. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
Starting DNS client service. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\ TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
The command completed successfully. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\ TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL' TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL' TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
Current OS version is 6.2.9200.0 TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
PXE Boot with Root = X:\ TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
Executing from PXE in WinPE TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
Loading TsPxe.dll from X:\sms\bin\x64\TsPxe.dll TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
TsPxe.dll loaded TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Device has PXE booted TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Succesfully added firewall rule for Tftp TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Executing: X:\sms\bin\x64\smstftp.exe -i 172.16.1.5 get X:\sms\data\variables.dat TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Command line for extension .exe is "%1" %* TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Set command line: "X:\sms\bin\x64\smstftp.exe" -i 172.16.1.5 get X:\sms\data\variables.dat TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Executing command line: "X:\sms\bin\x64\smstftp.exe" -i 172.16.1.5 get X:\sms\data\variables.dat TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Process completed with exit code 1 TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Succesfully removed firewall rule for Tftp TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
uExitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\server\pxe\tspxe\tspxe.cpp,185) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Failed to download pxe variable file. Code(0x00000001) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
PxeGetPxeData failed with 0x80004005 TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
HRESULT_FROM_WIN32(dwError), HRESULT=80004005 (e:\qfe\nts\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1459) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
TSMBootstrapUtil::PxeGetPxeData(&bPxeBooted, sVariablesFile, sPxePasswd), HRESULT=80004005 (e:\qfe\nts\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2665) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\qfe\nts\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\qfe\nts\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1226) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Exiting with return code 0x80004005 TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,493) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,335) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,553) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
Execution complete. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,493) TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,335) TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,553) TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
::RegOpenKeyExW (HKEY_LOCAL_MACHINE, sKey.c_str(), 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,809) TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
RegOpenKeyExW is unsuccessful for Software\Microsoft\SMS\Task Sequence TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
GetTsRegValue() is unsuccessful. 0x80070002. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
End program: TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
Finalizing logging from process 864 TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
Finalizing logs to root of first available drive TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
Successfully finalized logs to X:\SMSTSLog TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
Cleaning up task sequencing logging configuration. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)

Found problem:
was not reinstalling pxe and wds in right order. followed this thread
http://blogs.technet.com/b/configurationmgr/archive/2011/01/05/troubleshooting-the-pxe-service-point-and-wds-in-configuration-manager-2007.aspx
now all is working again.

Script to remove Install Application and reboot

Similar Messages

Maybe you are looking for