Script update when running

Oracle SQL Developer version 1.1.2.25 BUILD MAIN-25.79
Running under WinXP
Issue description:
It is currently not possible to update the script that is currently running.

open the sql file dialog
type a select that take some time to execute
you cannot update the running file in the mean time, text is locked

Similar Messages

Parent members not being updated when running AGG

I have a scenario where eventhough the bottom level members change the parent members are not being updated when we run an agg
For example if the bottom level member was 150 and we run the aggregate the numbers are fine. If the bottom level member was changed to #Missing then the parent members are not updated when we run the agg
IN the script below we use CALC DIM(COstCenters,SpaceTYpe)
My concern is the setting SET FRMLBOTTOMUP ON i use, because it looks like it's skipping that block. HOw can work around this issue without affecting the performance too much. For example using SET CREATEONMISSINGBLK ON might help, but will have a performance impact
Here are the details of the script
SET MSG SUMMARY;
SET FRMLBOTTOMUP ON;
SET CALCPARALLEL 4;
FIX("Budget","Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS("$1"),@LEVMBRS
(SpaceType,0),@LEVMBRS(CostCenters,0))
CALC DIM (ManagedBU,AllocatedBU);
ENDFIX
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",AllocatedBU,ManagedBU,
@LEVMBRS(SpaceType,0),@LEVMBRS(CostCenters,0))
"$1";
ENDFIX
/* Aggregating numbers for the report so it could be viewed n a top cost center level */
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS(AllocatedBU),@iDESCENDANTS(ManagedBU),@IDESCENDANTS("$1")
CALC DIM(COstCenters,SpaceTYpe);
ENDFIX
/* Aggregating numbers for the report so it could be viewed in a top regional level*/
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS(ManagedBU),@IDESCENDANTS(AllocatedBU),@IDESCENDANTS(SpaceType),CostCenters)
@IANCESTORS("$1");
ENDFIX

yes Aggmissg will work with from bottom up. As for performance, believe it or not, having Aggmssg on is quicker that off. That is because when off, it has to look at the children blocks to determine if there are data values present that need to overwrite the parent value where hen it is on, it does not look it just does it.

Internet Explorer Script Error when running report with user-entered params

We are using Crystal Reports Version 11.0.0.1282. We have multiple copies each installed on a separate computer. We have a relatively simple report with a prompt for 2 values (parameters) to be selected or input by the users. The desktop is either Windows XP SP3 or Windows Server 2003 SP2 On all the XP/SP3 computers, this report works as expected. On the exception computer, the Windows Server2003 Desktop, we see the prompting screen with place holders for graphics instead of the buttons. When we attempt to select a value for the parameter by keying in the value and clicking on the OK link (no button), we see message box titled "Internet Explorer Script Error" with text: An error has occurred in the script on this page.
Line: xxx (varies depending on param chosen)
char 1
error: Object expected
url: file:///c:/doc...../temp/1/prompting1.html
===============================
Searhing around the forum and using Google, I found a suggestion to be copying the "prompting" folder and dll from a known working system - tried this, it didn't work.
So. I still need a solution. Any other suggestions??
Edited by: Grant Ellsworth on Mar 16, 2009 10:29 PM

>> I do not think it is because of the parameters you are entering/using, try without using the
>> parameters (just for testing), if you still get the error then its not the parameters which is causing
>> the problem.
If I create the report without asking for user-entered params, it works.
>> Can you please specify the browser and the tool to display the report you are using? Generally the
>> error popps up when there are any mistakes in html or if you are using a javascript which has a error.
The active browser on the computer is IE7 - 7.0.5730.13
I am using the installed crystal reports 11 program to run the report. I open the report in CR by going to File/Open and selecting the report. Then I get prompted for my ms sql login info, which I enter. Then I see the "Enter Values" window with my data entry fields; but I don't see the nice formatting and buttons which I see when I run this from the other computers; I see only the placeholders. I select or enter data and click on the "OK" link. Then the message box pops up. The message box pops up when I click on any of the links or on the "x" in the upper right. Mesage box is explicit - Intenet Explorer Script Error, etc., as I described in my original post.
Thanks
Azhar

FRM-40208 - CAN NOT UPDATE, WHEN RUNNING IN QUERY MODE

Hi all,
I am calling a form in a query mode and when the query is performed in the called form, i am trying to update a field, but i get a error message frm-40208. I have checked my block properties insert_allowed, update_allowed and delete_allowed are set to yes and in the item properties the QUER ONLY is set to NO. can any 1 please help in this matter.
Regards,
Ritesh

how do you do an enter query? is it code somewhere in the pre-form or pre-block automatically using the enter_query?

Error when running the apxldimg.sql to update the images direct from rel3.0

Hi everyone,
I'm new to APEX. I'm upgrading from v3.0 to v3.1. I'm on the post-installation, section on "Updating the Images Directory When Upgrading from Release 3.0", I ran into error below when running the apxldimg.sql script. Has anyone run into the is error before. If yes, how did you fix it?
Directory created.
filelist_xml xmltype := xmltype(bfilename(upload_directory_name,file_list),nls_charset_id('AL32UTF8'));
ERROR at line 15:
ORA-06550: line 15, column 36:
PLS-00306: wrong number or types of arguments in call to 'XMLTYPE'
ORA-06550: line 15, column 25:
PL/SQL: Item ignored
ORA-06550: line 38, column 15:
PLS-00302: component 'EXISTSRESOURCE' must be declared
ORA-06550: line 38, column 3:
PL/SQL: Statement ignored
ORA-06550: line 52, column 46:
PLS-00320: the declaration of the type of this expression is incomplete or
malformed
ORA-06550: line 52, column 3:
PL/SQL: Statement ignored

My team member found another post that ran into the same problem and the section is for 11g only. My db is 9.2.0.5.

Getting Access is Denied when Running Script in OSD Task Sequence

I am attempting put in a script that will move the computer account to the proper OU in AD. I have the script but when it launches inside of the TS I get "CScript Error: Loading script "C:\_SMSTaskSequence\WDPackage\Scripts\MoveOU.vbs" failed
(Access is denied. )."
I am using the Run Command Line, and using the "Run this step as the following account" I have verified that the account has access to do what I need it to do in AD. I have attached the logs as well.
PackageID = 'WI10015A' InstallSoftware
3/21/2012 8:46:53 AM 3316 (0x0CF4)
BaseVar = '', ContinueOnError='' InstallSoftware
3/21/2012 8:46:53 AM 3316 (0x0CF4)
SwdAction = '0001' InstallSoftware
3/21/2012 8:46:53 AM 3316 (0x0CF4)
Getting linked token InstallSoftware
3/21/2012 8:46:53 AM 3316 (0x0CF4)
failed to get the token information InstallSoftware
3/21/2012 8:46:53 AM 3316 (0x0CF4)
Get RunAs private desktop SMSTS-169042\SMSTSDesktop
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Run command line under a user account InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Found the location for the package _SMSTSWI10015A. The location is on \\<SCCMSERVERNAME>\SMSPKGF$\WI10015A\
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
nPos != CCM::Utility::String::npos, HRESULT=80004005 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,253)
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Creating a connection to \\<SCCMSERVERNAME>\SMSPKGF$\WI10015A\ with default account
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Connection request for "\\<SCCMSERVERNAME>\SMSPKGF$\WI10015A"
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
No credentials available for connecting to "\\<SCCMSERVERNAME>\SMSPKGF$\WI10015A". See whether the share has already been connected.
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Connecting to "\\<SCCMSERVERNAME>\SMSPKGF$\WI10015A"
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Successfully connected to "\\<SCCMSERVERNAME>\SMSPKGF$\WI10015A"
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Resolved source to '\\<SCCMSERVERNAME>\SMSPKGF$\WI10015A'
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Command line for extension .exe is "%1" %* InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Set command line: Run command line InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Working dir '\\<SCCMSERVERNAME>\SMSPKGF$\WI10015A'
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Executing command line: Run command line InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Create a process under given user token InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Process completed with exit code 1 InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Microsoft (R) Windows Script Host Version 5.8
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Copyright (C) Microsoft Corporation. All rights reserved.
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
CScript Error: Loading script "C:\_SMSTaskSequence\WDPackage\Scripts\MoveOU.vbs" failed (Access is denied. ).
InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Command line returned 1 InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Entering ReleaseSource() for \\<SCCMSERVERNAME>\SMSPKGF$\WI10015A\
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
reference count 1 for the source \\<SCCMSERVERNAME>\SMSPKGF$\WI10015A\ before releasing
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Released the resolved source \\<SCCMSERVERNAME>\SMSPKGF$\WI10015A\
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Process completed with exit code 1 TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
TSManager 3/21/2012 8:46:54 AM
2520 (0x09D8)
Failed to run the action: Move Computer to Correct OU.
Incorrect function. (Error: 00000001; Source: Windows)
TSManager 3/21/2012 8:46:54 AM
2520 (0x09D8)
Sending status message . . . TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
Send a task execution status message SMS_TSExecution_ActionFailError
TSManager 3/21/2012 8:46:54 AM
2520 (0x09D8)
MP server <SCCMSERVERNAME> and port 80. SSL=false. CRL=false.
TSManager 3/21/2012 8:46:54 AM
2520 (0x09D8)
Site code: WI1 TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
Client machine name: 1J44KQ1 TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
Client Identity: GUID:6ffb32d4-1184-4e40-a1c8-26272a707a72
TSManager 3/21/2012 8:46:54 AM
2520 (0x09D8)
Advertisement ID: WI12029D TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
Package ID: WI1001E7 TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
Sending StatusMessage TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
Formatted header: TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>ABB94CBE-33F4-4EB9-A151-34EE3474A0F9</SourceID><SourceHost/><TargetAddress>mp:[http]MP_StatusManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2012-03-21T12:46:54Z</SentTime><Protocol>http</Protocol><Body
Type="ByteRange" Offset="0" Length="4174"/><Hooks/><Payload Type="inline"/><TargetHost/><TargetEndpoint>StatusReceiver</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg>
TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
CLibSMSMessageWinHttpTransport::Send: URL: <SCCMSERVERNAME>:80 CCM_POST /ccm_system/request
TSManager 3/21/2012 8:46:54 AM
2520 (0x09D8)
The request has succeeded. 200 OK TSManager
3/21/2012 8:46:55 AM 2520 (0x09D8)
Set a global environment variable _SMSTSLastActionRetCode=1
TSManager 3/21/2012 8:46:55 AM
2520 (0x09D8)
Set a global environment variable _SMSTSLastActionSucceeded=false
TSManager 3/21/2012 8:46:55 AM
2520 (0x09D8)
Clear local default environment TSManager
3/21/2012 8:46:55 AM 2520 (0x09D8)
Let the parent group (Testing) decides whether to continue execution
TSManager 3/21/2012 8:46:55 AM
2520 (0x09D8)
The execution of the group (Testing) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
TSManager 3/21/2012 8:46:55 AM
2520 (0x09D8)
Failed to run the last action: Move Computer to Correct OU. Execution of task sequence failed.
Incorrect function. (Error: 00000001; Source: Windows)
TSManager 3/21/2012 8:46:55 AM
2520 (0x09D8)
Any suggestions would be greatly appreciated!
"You can't fix stupid!"

I'm having the exact same issue. I'm using AutoIT for my script to move the computer account. I've tried using ADO, LDAP, and LDAP/ADSystemInfo object. They all fail with access denied. In fact the ADO version of my script fails just
trying to create the "ADODB.Connection" object which I know for a fact doesn't require elevation or administrator access. However, all three versions of the script work correctly when run manually outside the TS. They also work correctly on XP
machines during OSD. Only when deploying a Win7 machine do they fail during the TS. I've tried adding the runas user to the local administrators group beforehand but no dice. Did you have to restart the computer after doing the net localgroup
change? There has to be some other security config in Win7 that is set somewhere doing this. I just can't figure out what. I've even started looking at DCOM/COM permissions to see if something isn't right there.
I don't see why but maybe the script needs to be run locally? Any other ideas?

RMMR1MRS-When run in background cause update failure errors looking

hi,
RMMR1MRS report when run in background cause update failure errors .
There are few below reason for the error log.
1. for the PO invoice already generated - (its right if already invoice generated. should not happen again)
2. In MIGO, entire quantity has been reversed and also invoice generated with zero value - ( its right , should not happen invoice again )
3. Particular PO line item deleted - (its right if the PO line item deleted. ERS settlement not require)
For the all above reason, the update error occurs. But the mean time the program "RMMR1MRS" should not through the update error log.
Note: The job was not terminated due to this update error and also no harm because of the error log
can you please help on this update failure why it occurs.

Have you found a solution already? If so, please, share it with the community and close this thread.

Error when running a script using upsshell.exe

I have a simple custom script which is
Sub Test1()
Set fso= CreateObject("Scripting.filesystemobject")
Set ts = fso.CreateTextFile("D:\DATA\****\Outbox\Templates\Test.txt")
ts.writeline "hi"
End sub
When I am running it manually in workbench, the script runs fine but when I try to run it using upsshell.exe(command provided below)
D:\Oracle\MIDDLE~1\EPMSYS~1\products\FINANC~2\SHARED~1\upsShell.exe CustomScriptEx=****~admin~****~~****~D:\DATA\test\Outbox\Logs~Test1~1033~0
i get the following error
ERROR:
    Code............ 438
    Description..... [Script failure caused error]: Object doesn't support this property or method
    Procedure....... modupsShell.ExecuteCustomScriptEx
    Component....... upsShell
    Version......... 1112
    Process ID...... 292496
    Thread.......... 290292
IDENTIFICATION:
    User............ admin
    Domain..........
    Computer Name... *******
    App Name........ ****
PROCEDURE STEPS:
    1-Split Arguments
    2-Create Load balancer=*******
    3-Authenticate
    4-Get Next App Server
    5-Open App Server=*******
    6-Execute the script=Test1
    7-Step was not reached, a previous step failed
Any ideas on the error?

Hello Verdulken,
I have a few additional questions:
Does your application function correctly when running the LabVIEW operator interface you have created as a VI in the LabVIEW development environment (i.e. does this problem only occur when the LabVIEW operator interface is run as an executable)?
What is the error that you are receiving?
Regarding the VI that you open programmatically, do you open it in a visible manner (i.e. use the Show front panel when called option from VI Properties)?If so, do you also close this VI after it finishes (i.e. use the Close if originally closed option from VI Properties)?
Does the error occur on the step that calls this very same VI again later in the sequence?
Does your application function correctly if you use the development adapter for all of your calls?
Thank you in advance for this information,
Matt G.
National Instruments
Applications Engineering

Is there an ical update from 2.0.5 when running os 10.4.11

is there an ical update from 2.0.5 when running os 10.4.11.
i don't think i can update my os on this powerbook (powerPC), so does that mean i can't update the ical?
trying to use sync software and it appears that my version of ical will not work with the free software i've found.
any ideas?
thanks,
--h

Nope, that is the last ever version of Firefox for 10.3.9 and earlier versions.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Serial Number (system):          7302300GANE
Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State:          Enabled

EDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else!

TS1967 In the past, when I updated iTunes, some items would be 'lost'. I quit updating, still running 10.6 i do keep my files on an external hard drive, which I plug in before starting iTunes. If I leave the drive off, and update, would that keep me from

In the past, when I updated iTunes, some items would be 'lost'. I quit updating, still running 10.6. I do keep my files on an external hard drive, which I plug in before starting iTunes. If I leave the drive off, and update, would that keep me from losing any files? Also, does anyone know how to search the iTunes store by price? I'm particularly interested in movies and audiobooks... Thanks

iTunes does not have provision for automatically storing one kind of media on a separate drive, so you have some basic decisions to make first. Do you want these movies to still appear in your iTunes library, or are you content with browsing filenames on a drive in Finder when you want to look for one? The second's the easiest thing because then you don't have to have an external drive permanently turned on and attached to your computer (wired or wireless). To do that you literelly only need to drag your movies folder to an archive drive and delete movies from iTunes. To watch them again you can add it back to iTunes while holding down the option key so the movie is used from its location on the external drive.
There's ways to move the movies to an external drive while keeping them in iTunes but the external drive iwll always have to be turned on and connected to the computer or you will see a bunch of broken link exclamation marks.
Realize what you are talking about is not "backup". Backup (which you should do) is putting a second or more copy of items on external drives for the day when your internal drive fails and everything on it is lost, inclduing all your home photos and perhaps things that have been pulled from the iTunes Store and can no longer be re-downloaded.

Loading script "script path-name" failed (0xC0000006) error when running scripts from DFS

We have this issue where any number of random scripts that execute at startup will produce the following error when run from DFS:
The status code for this error equates to STATUS_IN_PAGE_ERROR - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.
This does not always happen each time and the script can be random. If we move the script(s) to a non DFS, we do not see this. I believe the issue is being caused by a minute disconnect to the DFS for whatever script is attempting to execute at that
moment. This happens across a few (consistent) offices on different computers.
Any ideas?

Hi,
According to your description, my understanding is that you run scripts in a shared folder which is added to a DFS Namespace, then the error prompt. However, you can run the scripts when you directly access the shared folder.
What scripts did you run? Is there any error message in the Event Log? If so, please provide us the detailed error message for our further research.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to run tests in Firefox when running script using runScript.bat

I am trying to run OATS script from commandline without opening Openscript IDE(eclipse). I use the following command to execute my script:
runScript "<scriptpath>/<scriptName>.jwg"The script starts to execute and launches IE. I wanted to run my test on Firefox but it always launches IE even if Firefox is my default browser.
If I run my script from Openscript IDE it honours the Browser settings in View > OpenScript preferences... OpenScript > General > Browsers. When running thorugh cmd line, these settings are not taken into account as Eclipse preferences settings are applicable only for the workspace selected for the IDE.
Any thought on how to set these preferences when running scripts using runScript.bat file?
Thanks,
Manish Khatre

Hello
You need to pass the value/parameters (preferences) to the command line as documented in the OpenScriptUserGuide.pdf.
Something like
-browser.type type
Specify the browser type to use for script playback
where type is one of the following (use exact case
and no spaces):
■ InternetExplorer
■ Firefox
The default is InternetExplorer
JB

Error when running child script in starter kit

Hi all,
When i playback the starter kit hr scripts it is showing the following error...
Failure when running child script hr_tsk_hr_0001a.
Can anyone tell why this error is occuring.

Glad to read you got beyond the initial URL. I can't even get beyond that. Oh well.

ORA-00600: Internal Error when running XSQl Script

Hi,
when running a xsql script with JDeveloper 3.1
the following message appears:
<?xml version="1.0" ?>
- 
- <xsql-error action="xsql:query">
<statement>select ename,job,sal from emp where
ename='ALLEN'</statement>
<message>ORA-00600: Interner Fehlercode, Argumente: [ttcgcshnd-
1], [0], [], [], [], [], [], []</message>
</xsql-error>
Does anybody knows, what's wrong ?
Regards
Andy

looks like bug #1725012, fixed in either 9.0.1 or 8.1.7.2
(these are RDBMS versions).

Script update when running

Similar Messages

Maybe you are looking for