Sd card reader not seeing card

hi i have a toshiba p105-s6217 laptop in the control sys,the sd card reader is there
but it dosen't reconize the card when inserted,i am running windows vista and downloaded the correct driver from this site util_sd_memory_25479B.exe
but still no go what to do now hhmmmm.ANY HELP PLEASE

Go into the Device Manager and delete the hardware SD item, reboot and allow the OS to reinstall the hardware.

Similar Messages

  • SD card reader not seeing my 2.0GB SD card

    The SD card model is the Rockfish Professional 2.0 GB, 166x. It works perfectly well in my Trust external card reader and my camera, just not in my new MacBook Pro 13. Any ideas?

    Try inserting it quickly, Scott. Sometimes if the card is inserted too slowly they won't register.
    Cheers
    Rod

  • Z60m card reader not detecting cards

    Hi,
    I had my z60m formatted recently and since then the card reader does not detect cards. On searching online I found a ricoh card reader driver which claims to work for the z60m which I have now installed. Still no luck. The green light next to the card reader blinks when I put a card in which could mean the hardware works.
    Hope someone can help me.
    Thanks
    Riaz

    hi
    drivers for card reader for z61m - win7 :
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    they are HP  but working just fine (mass controller question mark in DM)

  • Dc7800 "smart card reader not present" during POST

    Hi,
    I've got a dc7800 Small Form Factor system. It was working fine but after a reboot it won't start up normally anymore. The black POST screen appears, RAM testing starts to count up and then I see and error about "system options not set". After less than a second, a blue window in the middle of the screen displays the message "smart card authentication" and below that, "smart card reader not present".
    From a bit of reading it seems like a BIOS problem but I can't figure out how to really reset the CMOS and get things working again. I've tried removing the CMOS jumper and booting the system, removing the power cord and CMOS battery for 10 minutes, and have tried putting a BIOS .bin file on a FAT32 USB key in an attempt to use the BIOS recovery option, none of which has worked.
    Is there a way to do one of the following:
    - force the CMOS defaults to reset and remove the configuration that requires the smart card authentication?
    - force a BIOS recovery, with a key combination or by using a different jumper or jumpers on the motherboard?
    I see various other jumpers and pads on the motherboard like "ROM RCVRY" and the E15 Boot Block Recovery Header but scant information about how these might be used to solve the problem.
    It seems to me that the hardware is fine as it powers up and displays the POST screen. It's like a BIOS setting has been reset to require a smart card, even though there isn't one, nor even a smart card reader, in the system.
    Any advice would be greatly appreciated.
    TIA,
    JS

    Hi:
    After doing some research on the message, I came across this post.
    I guess your PC has a smart card optional system.
    http://h30499.www3.hp.com/t5/Business-PCs-Compaq-E​lite-Pro/DC7800-smart-card-athentication/m-p/10691​...
    Now, if you can get into the BIOS menus, if you look at the top of page 8, you will see what you need to do in order to enable/disable the smart card reader message.
    http://bizsupport1.austin.hp.com/bc/docs/support/S​upportManual/c01162201/c01162201.pdf
    Whatever the problem is, it is a security setting issue, and clearing the CMOS or updating the BIOS will not have any effect on that setting.
    Unfortunately, I have no experience with the security settings or protect tools software on HP business PC's.
    I have a dc7800 (and only use HP business desktops and notebooks), so I am very familiar with all the other aspects of the PC but that one.
    You may want to post your issue on the HP business support forum, business PC section.  Hopefully someone there has experience with turning this feature on or off.
    http://h30499.www3.hp.com/t5/Business-PCs-Compaq-E​lite-Pro/bd-p/bsc-271#.Uk2rcJAo69I
    You may also want to log in and reply to that post, but don't get your hopes up that it will be answered.
    RichS hasn't replied to a post in 3 years. Although someone else may.
    Good luck, and please post back if you find the solution to the problem.

  • In my macbook pro hdmi, usb & SD card reader not working

    In my macbook pro hdmi, usb & sc card reader not working.
    i have tried the SRM reset done, till not working started.
    Could you please resolve this problem,

    Welcome to Apple Support Communities
    Simply take it to an Apple Store or reseller if it's in warranty. Your Mac will be repaired or replaced for free because it looks a hardware problem rather than a software issue.
    If it's not in warranty, hold Command and R keys while your MacBook is starting up, and reinstall OS X. If it doesn't work, you can't do much more to solve the problem

  • Photo Card Reader not recognized

    I have a Card Reader for SD cards that, via USB, is supposed to be used to download pictures in the LapTop (esecially when you cannot do it directly from your camera). Once I connect this Card Reader to my MacBook Pro (Mountain Lion), I cannot "see it", neither in Finder or Desktop. By the way, it happens also with some USB sticks...
    Do you know how to make it visible and allow me to download the pictures? Thanks!

    Doesn't your mac have a built in sd card reader. Try that.
    As to your problem if nothing you connect to either usb port show up in either finder or disk utility then you have a hardware problem and the system will need to go to apple to be fixed. If it is a mid 2012 model you are still in the original warranty period of one year and the repairs should be done for free under the warranty. That is unless you have somehow damaged the system.

  • Z61t SD card reader not working?

    z61t SD card reader not working?
    Tried the Vista driver and still not working.
    Same for camera.
    I am running Windows 7 64bit and using TVSU v4.0 as well as manual attempts to update.

    I am running windows 7 home 32 bit and can not get the sd card reader driver to load either.  Any help?

  • Pavilion dv6 sd card reader not working

    I have searched the boards and have not found an answer to my built in SD card reader not working any more.  It worked fine until a couple weeks ago. When I go to "my computer",  the sd card does not show up as an available drive. I have tried several cards with no luck. The cards work fine when I use a USB card reader, just not the built in one.
    I checked the driver in device manager - at least the one I believe is the correct one - Realtec PCIE Card Reader.
    Any other ideas? It is a pain having to carry around an extra card reader. Thanks for the help
    rv9a
    This question was solved.
    View Solution.

    Good morning rv9a.  
    Prior to the uninstall did the computer make a noise to indicate it recognized the card when you put it in?
    You should go ahead and reinstall the specific driver for the card reader just to make sure that doesn't have an effect on the issue.  Here is the link for Windows 7 and here is the link for Windows 8.
    Another possibility is the the Plug and Play service is deactivated.  Try the following to check.
    Press the Windows+R keyboard shortcut.  
    Type "services.msc" into the box and click okay.
    Scroll down until you find "Plug and Play" in the list.
    Ensure that it is started.  If it is not right-click on the service and select Start or Enable.
    I'll keep an eye out for your response; have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Card reader not working out the box scr 3500?

    cac card reader not working out of box scr3500 help

    Welcome to discussions Kevin!
    I'm sorry to hear that first of all make sure that there is nothing sick on the eye of the camera it self, after that how is the lighting on the room that the computer will be set up? did the green light came on when you're trying to use iSight? i'm asking because the same thing happen to me but it was nothing but bad lighting in my office. If this doen't help call apple asap they should replace your computer with out a problem. Hope this helps good luck!
    Miguel

  • Memory card reader not working

    Compaq Presaro CQ3000 Series Model CQ3420AN Memory card reader not reading any SD cards.
    Where can I find download for original driver.
    This question was solved.
    View Solution.

    http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/Memory-Card-Reader-not-uploading/m-p/1265779...
    Here's a page that might help you resolve your problem if you haven't assigned a drive letter for your portable card readers.

  • HP Probook 450 GO laptop SD card reader not working

    SD card reader not recognizing any sd card and not working. Any suggestions?
    + Touch pad not working with double click - have to use the button below

    Hello @Jurists 
    Thank you for posting on the HP Forums.
    To get your issue more exposure I would suggest posting it in the commercial forums since the ProBook 450 G0 is a commercial product. You can do this here: Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
    The support page for your product may be helpful in the meantime: HP ProBook 450 G0 Notebook PC
    I hope this helps!
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • USB Card Reader not recognized on new Mac Pro (late 2013)

    My Sony USB multi-card reader (model: MRW62E), which I use for SD cards mostly, works on my MacBook Pro (Retina, Mid 2012), my new iMac, and my old Mac Pro (2009), via the USB ports, but is unrecognized entirely on my new Mac Pro (late 2013). All machines are running OS X Yosemite 10.10.2. Neither the card reader, nor the cards appear at all in FCP, image capture, apple system profiler, the desktop, or disk utility. I cannot find any drivers online addressing the issue, including Sony's website.
    Perhaps an additional update for increased compatibility vis-a-vis the new Mac Pro would do the trick...

    Does the reader show up under USB in System Report?
    If the reader is working properly both the reader and an inserted card will show up.

  • HT201304 I have been trying for two weeks to log into iTunes using my Bank of America Visa Debit card but no progress. Is it that iTunes does not use debit card, I only have a debit card and  Not credit card, so does it mean I can't use iTunes .?

    I have been trying for two weeks to log into iTunes using my Bank of America Visa Debit card but no progress. Is it that iTunes does not use debit card, I only have a debit card and  Not credit card, so does it mean I can't use iTunes .?

    I believe if you haven't already setup an itunes account, if you have access to computer with iTunes installed , you can create an iTunes account on that computer with no credit/debit card and then just buy iTunes cards at your local retailer to get credits.

  • Flex 14 SD card reader not working with larger cards on Windows 8.1

    The card reader in my Flex 14 is behaving very oddly. When I insert a 16GB SDHC card it makes the 'USB inserted' noise and the card shows up under device manager but I can't access it through file explorer. The card reader works fine with smaller SD cards that I have. I tried the card in another, Win7 laptop and it worked fine.
    I see a number of other people are having a similar problem and I have followed all of the troubleshooting advice I can find, but nothing is working. Does anyone have any other suggestions?
    This is what I have tried:
    1. Leaving the card in the camera and attaching the camera via USB cable to the laptop: same result, noise, but can't access the card.
    2. Trying to reassign the drive letter through storage controller: it shows the card but if you right click it to assign it a drive letter it says the 'file is missing'.
    3. Downloaded the Win8.1 x64 driver from Lenovo website and installed. This stopped the card being recognised at all.
    4. Installed the Win8 xc4 driver: this got me back to the noise but no action stage.
    5. Updated Windows.
    6. Uninstalled and reinstalled the driver numerous times both with the card inserted and without it and with restarting the computer after unistall and after reinstall.
    7. Ran Ubunutu from a live USB: This allowed me to see the card and copy its contents to the laptop's HDD.
    So it seems to be some incompatibility between the Lenovo drivers and Win8.1. Potentially it's to do with the USB drivers rather than the card reader drivers as the result when using the USB cable and the camera was the same as putting the card in the card reader. Is there a way to update these?
    Any other troubleshooting steps I could take?
    Thanks.

    What size are the cards?
    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Using The iPad Camera Connection Kit
    http://support.apple.com/kb/HT4101
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom 

  • CAC Card Reader not working on 1 of 2 computers

    I have an iMac 20-inch early 2009 and a MacBook Pro early 2011. I have installed OSX 10.8.5 on both. I followed the instructions to the letter from http://militarycac.com/ on both computers. I am able to use my SCR331 reader successfully on my MacBook Pro but am not able to use it on my iMac.
    On the iMac:
    I am able to see the SCR331 is conencted and recognized via System Information. The SCR331 version is 5.25 (updated firmward as suggested at ttp://militarycac.com/)
    I attempted to install Centrify (which did not work) so I chose CaCKey instead, which installed just fine
    When I plug the reader in, the light lights up steady. When I insert my CAC it does not blink like it should. The CAC certificates do not show up in Keychain either.
    When I unplug the reader from my iMac and plug it into my MacBook Pro, it works just fine... I'm missing something somewhere........
    Any help wold be greatly apprecitated! Thank you!

    I forgot to add:
    On my previous version of OSX (unfortunately I can't remember which I upgraded from) I was able to use my CAC Card reader on my iMac. So, after upgrading to 10.8.5 I was no longer able to use it with the OSX native software. I wonder if some of the settings I had to tweak (when using the old OSX) are affecting this problem now...
    I had never tried using my reader on my MBP previously.

Maybe you are looking for