SD Cond. type changes from non statistic to statistic when creating invoice

Hi gurus!,
I have a problem with a condition type. Though I set it as NON statistic at the procedure, once I create the sales order it's ok but when I create the invoice from the delivery, then the same condition type appears as statistic.
Do you know how to solve this?
Its config is:
On procedure:
Condtype      Description         Print      req.      Cont. key      
Z001     test description  S           777      MWS
Its properties:
http://imageshack.us/photo/my-images/831/screenshot080d.png/
Thanks in advance
Edited by: John Smith on Nov 4, 2011 2:34 PM Reason: not finished

Hello!
After testing many things I debugged the VF01 code and noticed that a code into a standard enhancement was setting the condition type statistic because it has not an invoice cycle (IS-OIL) set. This must be new on ECC 6 where we move some months ago because in 4.72 never happened.
Once I have set the value for this flag, all the flow is working like a charm
Thanks a lot for your answers, this was a difficult one because is specific for IS-OIL installations.
Regards,
John

Similar Messages

  • I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

    I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

    See:
    *http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

  • IPhone6 is not sending or receiving texts from non-Apple users, except when in Group texts. I've tried the various fixes on the main support page to no avail. Any ideas?

    iPhone6 is not sending or receiving texts from non-Apple users, except when in Group texts. I've tried the various fixes on the main support page to no avail. Any ideas?

    Have you contacted your carrier to make sure there's no issues with your account?
    ~Lyssa

  • How to change ship to party'  Transportation zone when create a order ?

    Hi,
       I want to change ship to party'  Transportation zone when create order with VA01 before save.
       what user ecit can be used? I modify the Transportation zone  in the table xvbpa in program MV45AFZZ, but it does work.
       Please help ~
      Thank you~

    Hi,
    Try to use Fm  BAPI_SALESORDER_CHANGE
    in table u can find
    PARTNERS          Communications Fields: SD Document Partner
    PARTNERCHANGES          Partner changes
    and use UPDATEFLAG when  you change

  • MRP type change from VB to PD - Problem in old requirements MD04

    Hello Experts,
    For MRP run we were using VB as MRP type in material master. We upload schedule in scheduling agrrements. At time of MRP run system was only considering based on reorder point only.
    Now business disicion is change and we have changed MRP type as PD. So at time of MRP run system should consider based on requirements i.e. from scheduling agreement. Now here is our problem. System consider and shows old scheduling requirement also in MD04. Let me explanin you in detail. Before changing MRP type from VB to PD, there were some schedule  available in system. after that we have uploaded 2 3 more schedule. But system still shows old schedule availabe at time of MRP type change.
    Can you please help me how to resolve this?? How can we clear old requirements from system.
    Thanks in advance for your reply.
    Regards,
    Piyush

    Hi,
    Not too sure but , try # SDRQCR21
    Regards
    Chandrasekhar

  • Latency type changed from fast to interleaved

    My Latency type as changed from Fast to Interleaved, why?
    From - Latency type: Fast
        To - Latency type: Interleaved
    Can it be changed back to fast ?
    Since it as changed, it feels like my broadband is now being capped. It as become slow  .5mb when usually I was getting 1.9mb.
    ADSL Line Status
    Connection information
    Line state: Connected
    Connection time: 3 days, 11:47:08
    Downstream: 19,661 Kbps
    Upstream: 1,164 Kbps
    ADSL settings
    VPI/VCI: 0/38
    Type: PPPoA
    Modulation: G.992.5 Annex A
    Latency type: Interleaved
    Noise margin (Down/Up): 2.6 dB / 6.2 dB
    Line attenuation (Dwn/Up): 22.0 dB / 10.9 dB
    Output power (Dwn/Up): 0.0 dBm / 12.3 dBm
    FEC Events (Down/Up): 117943179 / 717
    CRC Events (Down/Up): 220069 / 238
    When using Facetime,the conversations on the devices have become very broken!!
    Thank you
    Solved!
    Go to Solution.

    I did a quiet line test and the result was Ok, no noise on the line.
    Here are my stats including the hidden errors:
    ADSL Line Status 08:43 on the 13/03/2013
    Connection information
    Line state:
    Connected
    Connection time:
    0 day, 19:38:32
    Downstream:
    19,075 Kbps
    Upstream:
    1,197 Kbps
    ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    3.4 dB / 5.9 dB
    Line attenuation (Down/Up):
    22.0 dB / 11.0 dB
    Output power (Down/Up):
    0.0 dBm / 12.7 dBm
    FEC Events (Down/Up):
    18336078 / 133
    CRC Events (Down/Up):
    78366 / 37
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    HEC Errors (Down/Up):
    10689528 / 29
    Error Seconds (Local/Remote):
    0 / 17

  • Changing from non non smartphone to iphone 4

    trying to switch from non smartphone to iphone 4. same provider. cant get phone service but internet works.

    And what did your cellular carrier say when you reported the problem to them?

  • Make changes to auto generated line items when posting invoice thru MIRO?

    Hi All,
    My requirement is to make some changes in line items data when posting invoice through MIRO transaction.
    I have written a substitution for the same, The issue is that some line items get automaticaly created (i.e inter company posting). I need to make changes to these line items as well but substitution is not being triggered for these auto generated line items.Is there any way by which I can update in these line items as well ?
    further do we have any internal table which holds all the line items at runtime....to which I can refer and make the changes. I have searched but could not find one.
    Can anybody provide some inputs on this.
    Thanks,
    Lucky.

    Hi Kaushik,
    Thanks for your reply.
    I am using BADI INVOICE_UPDATE but here we will not be having line items which are auto generated.
    When we do inter company posting, line items are automatically created and these are not avaliable in the BADI. I am not sure if we can trap these line items any where.....the possible alternative which I can think of is to use memory reference and modify the internal table which holds all the items but unfortunately I am not able to find any such internal table to refer to at run time ...have u got any idea on this?
    Thanks,
    Lucky.

  • Reg : Procurment  Type Change From F to X

    Hi,
        Can we able to change the Procurment Type From F to X  in MRP 2 View ?

    I dont think so, a material once declared as externally procured, cannot be change to both.
    regards,
    Sudhir

  • Fact table data type changed from int to nvarchar -- rebuild on cube fails

     I change one of my data types in the Fact table from INT to Nvarchar... When I look at the properties it appears
    correct but when I try to Process it fails still thinking it's data type INT.
     How can the DSV be refreshed( I did try REFRESH  and it noticied the change to field) to reflect new nvarchar data type without
    having to rebuild entire Cube.
    SSAS 2005
     Thanks.

    Did you try to view the code on the Data Source view and cube that it is reflecting the correct data type on both places? if not you can change there and save it.
    prajwal kumar potula

  • Movement Type Change From 321 to Some other In Stock Posting (Insp Type 05)

    Hi,
        While doing the stock Posting From quality to Unrest - Automatic 321 Movment type is happening
        But my client neads to identify how many qty from custmer return is passed to unrestricted from       
        quality.
       i have problem in identify since 01 and 04 and also 05 all are having the same mvt since it is automatic
    Can it be possible to chnage the mvt for the particular Inspection type 05.
    kindly give me is there any way to solve this issue.
    Regards
    jai

    Dear jaikumar
    No need of changing movement type for the same. You have too many options to get this fugure
    You can use Tcode se16, se16n and in the table QALS you will be able to know the quantity posted to unrestricted by selecting 05 inspection and from to date in input for the table view
    else go to the standard report . Tcode MCXC, MCXI you will get the report based on inspection type and period
    Regards
    gajesh

  • Output different if Device Type changed from SWIN  to HPLJ4

    Hi,
    I have a few problems here for my SAP smartform. Hope someone out there can help.
    1/ I am using font: Helvetica for my smartform. I realized that the output (on Print Preview as well as the actual Print output) shows a different font if I chose Device Type: HPLJ4. If I choose my actual printer HP4250 as the Device Type, the font is the same as that shown for SWIN as Device Type, but the spacing is a bit different. Is there any way I can make sure that the font type, spacing will not differ for a different Device Type?
    2/ The reason why I am not printing using SWIN as Device Type (which will ensure consistent output even if printer is changed) is becoz I need to use the PCL5 print control commands to rotate a certain section of text in my smartforms- which is only possible on HP PCL5 printers. Is there any way I could rotate text in smartforms without print commands and yet I can still use SWIN as Device Type? (pls do not suggest creating a bitmap picture for the text).
    <b>In short,</b> I need to know how can I ensure consistent output (same margin, same font, same font spacing) even if a different printer is used (any Device Type I can use?) and at the same time, enable me to rotate a certain section of text in my smartform(180 degrees)?
    Thanks very much for any help.

    Hi,
    For the first question, generally the output (spacing etc) changes when you change the device type. So you need to adjust the alignment according to your output type.
    Thanks,
    Nagendra

  • Condition Types : Calculation Type Change from A (percentage) to B (fixed )

    Dear All,
    We created a condition type (Calculation Type : A (percentage) ) and assigned access sequence and maintained in pricing procedure but later decided to change the calculation type to B (Fixed Amount) on this condition type.
    I am wondering, what impact it will have ?? Can I simple change the calculation type on this condition type or should I take care of any thing else ??
    Let me know, What things I have to take care of.  Thanking you.
    Anu.

    Hi Anu,
    No need of worry if it is independent condition type, means other conditions are not depending on it OR it is not depending on others.
    Also check the condition records if they have any impact.
    Else not a big issue, simply go ahead.

  • Changing from non-ssl to ssl communication in OAM

    I have installed the Identity server and webpass on linux, I initially set them up for non ssl communication between them and the configuration/policy store & the user store. Now I must change that to use SSL. I have not configured them yet. how would I make this change without reinstalling?
    When I try to set the configuration data location with SSL checked I get the following error
    The files requires for SSL connection are missing.

    Hi Andy,
    Note 740034.1 on My Oracle Support describes how to do this. After performing those steps, I would also verify that you do not have any remaining Open Mode directory profiles being used (in the Identity System Console/System Configuration/Directory Profiles).
    Regards,
    Colin

  • Why does Dynamic Type change to a fixed font size when copied from one Note to another Note in the Apple Notes App?

    If I copy and paste text from one note to another, it pastes in at the current Dynamic Type size but is no longer adjustable. I have tons of notes with various fixed size text. Is there a way to reset all the text in the Apple Notes App to Dynamic Type so they can be adjusted using the font size slider in settings?

    When you use IMAP, as opposed to "On my Mac," Notes will create a folder called "Notes" on the mail server.  It will then store notes in there.  If you create subfolders in Notes (which you can do), those will be stored as subfolders of Notes on the server.
    So in the case of Gmail, you should be able to log onto your Gmail web account and the notes should probably show up in "All my Mail" with a label of Notes (this is because Gmail's IMAP implementation is VERY nonstandard and it doesn't actually support folders; it uses labels instead).  If you view the Notes label in Gmail's web interface you should see all your notes.
    Because of Gmail's IMAP implementation you should be very careful not to remove the "Notes" label from any of your notes if you're in the web interface, or they will disappear from the Notes app on OS X itself.

Maybe you are looking for