SD Condition only for position type??

Hi everyone!!
I have a discount condition for a customer. In the same sales order, I have this:
Position type A +10 UNITS
Discount 2%
Position type B -1 UNITS
Discount 2% (This is a mistake!!)
How could I customize to eliminate this condition when it is a return?
I have tried doing scales with the amount, but its not working because the amount is possitive.
And I can't do it with the price or I don't know how to do it.
Also I have a header discount that should apllied only for a possitive amounts.
Can anyone help me??
Thank you in advance.
Regards.

Hi,
If you doing return order with reference to invoice or original sales order then in copy control t-code VTAF and VTAA
at item level assign PRICE TYPE - B (Carry new pricing) but if you maintained condition record for discount it will again derived in price,
so if you want to maintain condition record(and only restricted discount in return) the create new table with combination of
Sales document type + customer + Material and assign it in to access sequence
Now maintain condition record for this combination.
So when you process standard sale discount can dervieved from condition record,
but when you doing return it will not.
Kapil

Similar Messages

Caching Realm: enable only for positive answer

Hi,
can anyone give me an idea if it is possible to enable the caching realm
only for positive answers and not for negative?
Just setting the ttl for negative does not seem to work:
weblogic.security.realm.cache.user.ttl.negative=0
However, if this is not possible it would be also helpful if I could
somehow trigger the cache to be invalidated. Is this possible?
Thanx in advance,
Sven

Hi
I am working as a system administrator. Now i am facing a challenge
in my company. Whoever connects to our windows VPN they are able to copy
the data over the network. It causes data leakage in my company. My
requirement is whoever connects to our windows
VPN they should be able to use RDP. None of the other services should
not work. Is there any workaround for this. We do not have access to any
corporate firewalls. I am expecting a workaround in windows OS itself.
This topic first appeared in the Spiceworks Community

How to create an output condition record for output type

For SD LE shipping...
Create an output condition record for output type
Thanks!
Message was edited by:
        Hoo Laa
Message was edited by:
        Hoo Laa

Hi Hoo,
Follow the path.
SAP Easy Access -> Logistics -> Logistics Execution -> Master Data -> Output   -> Shipping - > Create.
Tcode: VV21.
Hope I have clarified your query. Do reward if so.
Regards
Nadarajah Pratheb

Condition Records for Output types

Hello Gurus,
Do we need to maintain the condition records for the output types configured as Archive only Storage mode??
Will this option archive only in Output type completely archive the document???
Points will be rewarded generously for the apt answers
Thanks and Regards,
Pavan P.

hi pavan,
Still u have to maintain the condition record for the archive mode also. Becoz what are the document type u want to archive is defined in the o/p records.
suppose u want to archive billing documents types F2,F1etc...
then goto--> vv31-> enter RD00->enter the billing documnt type-. now click teh communication button on the top -
> here u will find the storage mode. Means the docuemnts which are created with F2 are archived.
regards,
Arunprasad
Message was edited by:
arun prasad

Condition missing for Billing Type

Hello Gurus
I have a Billing Type ( Say Z123) for which a condition ( say VPRS) is missing. How can I update this ?
Regards
Rajesh

Hi Rajesh,
You will have to do a Pricing analysis and then will have to follow corrective measures accordingly.
Some common errors are:
1) If the requirement is not met. in this case you will have to readt the requirement code and debug to see which check in the code is failing.
2) If the condition record is missing, you will have to check wether the record exista and pricing date is within the validity dates. If its not created create a new recrord.
3) Lot of times, one data point is missing in the sales order for right determination of pricing records. You will have to check this analysis, if one data point is missing then it will carry an exclamation mark.
4) It record has been found and not set, then change the pricing date to the date after pricing record validity date.
Hope this helps.
Abhishek

Archiving of ERS messages: maintain archiving parameters for message type

Dear experts,
I have problems creating archive messages for ERS messages in ECC 6.0. I always get message "Maintain archiving parameter(s) for output type ERS (appl. MR)" even if I have done all steps as described in SAP note 391822:
NACE: application "MR", output type "ERS"
details: storage mode "2 Archive only", document type "ZUNSGUTHCD"
processing routine: medium "1 print", program "RM08NAST", form routine "ENTRY_ERS", form "MR_PRINT".
A condition record for message type ERS is existing with function "VN" and medium "1" and date/time "4".
OAC2: document type "ZUNSGUTHCD", document class "PDF", status "x".
OAC3: object type "BUS2081", Doc.type "ZUNSGUTHCD", L "x", Content rep. ID "K1", link "TOA01", retention period "0".
The archive "K1" is existing and working for other documents, but not for ERS.
Something is missing, but I don't find out what. Any help is greatly appreciated, point are given!
Regards, Karsten

Dear experts,
I have problems creating archive messages for ERS messages in ECC 6.0. I always get message "Maintain archiving parameter(s) for output type ERS (appl. MR)" even if I have done all steps as described in SAP note 391822:
NACE: application "MR", output type "ERS"
details: storage mode "2 Archive only", document type "ZUNSGUTHCD"
processing routine: medium "1 print", program "RM08NAST", form routine "ENTRY_ERS", form "MR_PRINT".
A condition record for message type ERS is existing with function "VN" and medium "1" and date/time "4".
OAC2: document type "ZUNSGUTHCD", document class "PDF", status "x".
OAC3: object type "BUS2081", Doc.type "ZUNSGUTHCD", L "x", Content rep. ID "K1", link "TOA01", retention period "0".
The archive "K1" is existing and working for other documents, but not for ERS.
Something is missing, but I don't find out what. Any help is greatly appreciated, point are given!
Regards, Karsten

For m.type 261 goods issue output device need to be configure

Hi All,
As above said in the subject line is there any way to configure output device for m.type 261 goodsissue
I want to configure output device only for m.type 261 not for other m.types so kindly let me know the configuration settings.
regards
sapmm

The configuration steps are under:
IMG \ Materials Management \ Inv. Man. and PI \ Output determination . . .
Condition Tables
Access sequence
Output Types
Procedure
You want a small Requirement (an ABAPer could create in minutes) for your Procedure that limits the output according to Movement Type 261.
Regards,
Nick

Condition records for RFQ outputs

Hi
I have seperate output types for RFQ (ZPRS) and PO (ZROP).
I have created document types for PO and RFQ but both are having same code.
Z007 - Hiring Services PO (Category -F)..
Z007 - Materials Req RFQ (Categ -A)
Now when i am maintaining condition records for output types of RFQ in T-Code MN01,
i select ZPRS as output type and trying to maintain the document type of RFQ (Z007), but
the system takes Doc type Z007 of PO.
Kindly let me know what is the issue. Because all the output type and document type has been maintained correctly for respective document category.
Regards
Madhesh Kumar

Hi
At the time of maintaining condition records using MN01 , In the Purchasing document type selection, you can see that the Document types are always listed based on the Document category.
For RFQ the docuemnt category is A so select accordingly for the RFQ.
If you are doing a mass creation ensure that you uses the dcoument category as one of the key combination.
Thanks & Regards
Kishore

PR Release Strategy for DOCUMENT TYPE

Hi Gurus,
I have created a Document Type in PR & I want to set a Release Startegy for ONLY that Document Type.
Can anybody explain me step by setp procedure for this ?, I have gone thru one link :
http://www.sap123.com/showthread.php?t=59
but I could not set the relase startegy. May be I am missing something ??
Thanks & Regards,
Vikas

If you want to define the release strategy only for doc type
then
create the class using CL02
create the chra for Doc type using CT04 - the table is CEBAN and the field is BSART
then assign the doc type value in char (after you create the char then go back and assign the value)
now assign your char to your class
now go to SPRO and goto PR release strategy config - procedure with classification
go to Set Up Procedure with Classification
create your release group by assigning the calss you have created (make sure this config should have only one class)
create release code
release indicator is already exist in sap so you don;t need to create
create your release strategy and assign the value in classification tab of release strategy
this will work
but make sure that - if you are creating only for doc type means all the reqs created for this doc type will be blocked by the system. so if you have reqs like if this doc type and the amount >5000 then only block then you have to have amount is also you char in your class
hope this will give you a cleat idea

Regarding the 'Dispatch time' settings for output type...

Hi Experts,
May i know what 'Send with application own transaction' means when we configuring output type in SPRO for 'Dispatch time'.
Cause i knew if we set it as 'Send immediately', then this output type will be triggered upon saving the orders.
But i dont know what that item for..Could you kindly help me on this...
What it means if we set the dispatch time as 'Send with application own transaction' for delivery output..??
Thank you very much.

Hi,
If you choose 'Send with application own transaction' when maintaining condition record for output type,during order,delivery and invoice saving the output type signal is yellow,that means unless you select that output and trigerred for printing it will not goto the spool.i.e in simple words the output is for manual printing.......
Let me know if you need any clarifications on this..
Regards,
Chandra

Serial number for mvmt type 501,561

Hi
When goods movement is done( only for mvmt type 501,561) the system is not saving the serial numbers even though serial number profile is maintained and it is kept mandatory.
Thanks
sam

If you want to solve this issue you have to do the config explained below in
SPRO- Plant Maintenance and Customer Service -Master Data in Plant Maintenance and Customer Service -Technical object-Serial number management- Define Serialization Attributes for Movement Types
In this Customizing step, you can define the serialization attributes of
     individual movement types or movement type groups.
Maintaing this setting is only necessary if you think the assignment of
     the serialization attributes at operation level is too rough.
Currently, only the serialization operation MMSL (Maintain goods entry
     and goods issue document) is supported.
Notes
If you do not assign a movement type group to a movement type, then the
     system always uses the settings from the serial number profile, that is
     defined for the respective serialization procedure key.
Here you should only make settings, if you really absolutely need a
     movement-type-specific control of the serialization attributes.
Example
For example, in the serial number profile for the serialization procedure
     MMSL, you define that serial numbers can be issued for goods movements
     (serial number usage 02).
For certain movement types, however, you want to ensure that serial
     numbers must be used.
To do this, you could define a movement type group here with the
     corresponding assignments and assign this movement type group to the
     required movement types in the next step.

Selecting the best Price for a condition type but only for some customers

Hi All,
I have this situation where we have condition type ZPPR (COPY OF PR00) with 5-6 Condtion tables.
in Access sequence for ZPPR, we have Exclusion Indicator set for all the conditiona tables so if first price is found, it doesn't search for others.
Now I have a requirement that we should search for all the condition records and choose the lowest price. But this should happen for only a certain type of customers and not for everybody.
Spefically we have:
1. Contract Price
2. Plant/Material price
Normally, if contract price is found, it doesn't look for Plant/Mat price but we want to offer our customers(some of them) an option where they could choose the lower of the two price. We set both the prices every day based on some inputs.
Regards,
Luke
Edited by: Lukesh Singla on Dec 21, 2011 8:49 PM

Hi Luke,
We have multiple option for this implementation:
Option 1: If possible based on access sequence. Not sure if this is suitable considering you mentioned that ZPPR has 5-6 access sequence.
1) Store Contract price in condition type ZPPR and store Plant / Material Price in new condition type say, ZPPX.
2) Have separate pricing procedure and determine them based on customer type. In first pricing process XXXX01, configure Condition exclusion with the setting that ZPPX should be deactivated if ZPPR is present, condition exclusion procedure D (exclusive) . In second pricing procedure XXXX02, configure condition exclusion with the setting that compare ZPPX and ZPPR and activate best condition type for the customer by using condition exclusion procedure C (Best condition between two exclusion groups ).
Option 2:
1) Copy ZPPR and its access sequence to a new condition type and access sequence say ZPPX without checking exclusion indicator in the access sequence. In the condition type control for condition type ZPPX >> Master data section >> Reference Condition type = ZPPR so that master data records need not be duplicated.
2a) Assign the current procedure to the set of customers which should get the first price. Create a new procedure with condition type ZPPX instead of ZPPR keeping other parameters similar and assign the new procedure to other set of customers who should get the best price.
OR
2b) if 2a is difficult in terms of future maintenance, add condition type ZPPX in the same procedure and create 2 new pricing requirement validating the customer segments and assign them to respective condition type in procedure ZPPR and ZPPX.
3) Maintain condition exclusion for condition type ZPPX with B ( Best condition within Condition type).
Hopefully it helps. Let me know if you need any other help in implementation of the solution.
Regards,
Naveen Aggarwal

Sales Order Unable to Use New Condition Tables for Tax Condition Type

Dear All,
I am currently working on SAP R/3 4.0. I have a new requirement for my tax where I need to create new condition tables other than the 4 standard SAP tables which are Customer/Material, Division/Customer, Departure Country/Destination Country, Domestic Taxes and Export Taxes. My new tables consists of Departure Country/Destination Country/Shipping Point/Tax Code. The requirement is that the tax code is based on the chosen destination country and shipping point. The problem I am facing now is that no matter what types of table I create or even I generate with reference to the standard table, the access sequence will only refer to the 4 standard SAP tables above. Even if I put my own table in the highest priority for the access sequence, the same thing happens. My sales order will only pick up date from the standard table.
I wonder if anyone encountered the same problem as me.
Kindly advise.
Thank you.
Regards,
Yvonne

Hi
Yvonne
I suggest fist check a simple thing ,whether u have successfully determined shipping point for each line item ,it is possible that just adding a line item will not trigger shipping point determination . So after u update the shipping point on line level u can rerun pricing and check agian if u r getting it .
Secondly for tax purposes I suggest Try to have Customer and material tax classification approach this allows to u have long term flexibiliy and also reduces your maintenance activity . As if u change or add number of shipping points and business changes using the sequence of shipping point ,the logic of just using shipping point will not work.
In Tax classification u cna add new condition table for each new tax category and use it in different access sequences.
This information can be passed on to FI using Different Tax code for Different combination.
I hope this helps
Regards
Mandar

How to restrict the job start conditions (only "Immediate" type) ?

Hi,
We allow our users to schedule and execute in background mode transactions (example IP19, IW38). We gave them for that authorizations (object S_BTCH_JOB with LIST, PROT, RELE and SHOW - objetct S_PROGRAM with BTCSUBMIT).
We would like that users can schedule and execute their jobs only with the u201CImmediateu201D job start condition (in the Start Time screen for the type of start condition : Immediate, Date/Time, After job, After event, or At operation mode).
Another solution: prohibit the scheduling and the execution background job in a certain time interval ...
How can restrict the job start conditions ?
Thank you.
Patrice.

Hi Jan,
Yes, sa38 makes it possible indeed to execute in background into immediate mode a job but
the user have to know the name of the program to be carried out ...
The user knows only the name of these transactions trade. For example, IW38.
In the menu of this transaction, SAP gives the possibility to execute in background :
Program --> Execute in Background --> display of Start Time screen for the type of start condition :
Immediate, Date/Time, After job, After event, or At operation mode).
It is at this time there that we want that the user can only choose the "immediate" mode.
We must thus prohibit the other choices (Date/Time, After job, After event, or At operation mode) ... and
and we don't know how to restrict these other options in this screen "Start Time screen for the type of start condition".
Thank you.
By.

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

SD Condition only for position type??

Similar Messages

Maybe you are looking for