SD sales cycle
When we raise a sales order with reference to contract, we can change the quantity in sales order. How to prevent it?
Hi Chandra,
After seeing a couple of questions from you, am just thinking may be you need to spend a little more time referrng to SAP documentation. I appreciate your questions but I think you see a point in what I am trying to say.
You will get more inputs and much better process understanding when you thoroughly go through sap help. In this kind of a quesiton you might just get a simple reply that do it like this and get your job done. I encourage you to experiemnt with the system, do a bit more research. i am sure you will ike the results.
All the best.
Regards
Sadhu Kishore
Similar Messages
-
Deletion of Complete Sales Cycle
Is there any shortcut to completely delete the sales cycle including sales order,delivery,pgi,invoice and accounting document and all the impact are reversed as there were some major issues in the data entry and there is no other wayout.I have to bring the sd module to the state of"new born".Help!!!
hi,
then clean up the tables and keep the cleaned information in archive.
From my little experience in systems implementation, support and administration, one phenomenon that has contradicting meaning depending on the context in which it is used is archiving or data archiving. Often times, IT professionals tend to confuse the term with concepts such as data reorganization, fragmentation, document imaging, backup and restore among others. Even in the SAP world, some technical professionals takes data archiving to be synonymous with terminologies such as SAP Archive Link and DART.
While I do not intend to do a compare and contrast these phenomenons in this post, I think it is expedient to clearly define what data archiving is in the context of SAP. I will also give an overview of how data is archived and the benefits of data archiving in SAP.
What is Data Archiving?
Data Archiving is a decongestion process used to delete large volume of data that is no longer needed from a database and storing same outside the database in a format that allows for data retrieval and analysis when need be. The emphasis here are on u201Cdeletingu201D and u201Cstoringu201D. It is common knowledge that if a database is left to grow unmaintained, there is a possibility of having performance bottlenecks and high database maintenance cost. Hence, one of the ways to maintain the database is to delete records that can be termed obsolete. The word u201Cobsoleteu201D is relative. For the archiving process to be complete, data has to be stored using a defined method.
How is data archived?
The data archiving run follows a sequence of steps. A brief overview is provided below.
1. Creation of the archive file: During an archive run, the write program first creates archive files which initiates the reading process (from the database) and the consequent writing process (to the archive file)
2. Storage of the archive file: After successful run of step 1, the created archive files are stored. A number of methods can be leveraged to store an archive file. Archived files can be stored hierarchically, optically or manually. It is important to state that SAP does not recommend the manual storage of archive file. This is as a result of some standardization issues
3. Deletion of data: This step terminates the archive run. Before data is deleted from the database, the program first read the content of the archive file. It is after this task, that the program deletes the corresponding entry from the database.
Benefits of Data Archiving
1. Reduced Backup and Restore time
2. Reduced access time for tables
3. Reduced database administration cost
4. Reduced downtime for system upgrade
5. Reusability of data
Regards,
balajia -
Vendor return through sales cycle
hi sap gur's
we want map senarios for vendor return with excise, my client have deeply cin implimented
my leam lead told me vendore return map through sales cycle
means
return mat.doc through 122
than creat sales order,, delivery than billing but taking care no accounting document ganareted during sales cycle
how i can map vendore return senario with excise revers in sales cycle
thanksDear sir.
First in vendor master Purchasing Data, click Returns Vendor indicator.
when u click the return vendor indicator system will pop up one window , give the account group and shipping Cond. system will automatically create the vendor and it will assign to the vendor and customer also.
Go to MIGO select return delivery and give the material document number.
in general header tab click the indicator Via delivery. and check and post, system will create the outbond delivery number.
go to VL02n give the outbond delivery number and do the PGI.
with respective outbond delivery number create the per-form billing in vf01. with respective bill number create the excise invoice in J1IIN.
regards
jrp -
Use of Letter of Credit in Sales cycle
Hi Guru's
Can any one send me or explain me of the letter of credit work process in SAP or sales cycle?
Please Suggest any documentation on it
thanx In advcnce.HI Prashant,
here is the overview or payment cards
1. When you create a sales order, you can enter credit card data manually, or copy it from the payer master record. You can enter one card in the sales order overview screen. You are able to enter multiple cards, or multiple authorizations on one card, in the payment card plan in the sales order header. The system automatically authorizes the sales order when you save it.
At a later time, you create the delivery. The authorization may have expired in the meantime, so the system checks to ensure that it is still valid. If the authorization is no longer valid, the system tells you to reinitiate authorization in the sales order. You complete and save the delivery. When all the items are picked, packed, and goods issue is posted,
you create a billing document. Here, payment card data is copied from the sales order, or uploaded directly into the billing document from an external system, as in the case of point of sale. The system uses the authorizations in the payment card plan to calculate billing amounts. You process the billing document and release it to Financial Accounting.
PAYMENT CARD MASTER DATA
To quickly and efficiently process sales orders with payment cards, you can store card data in the payer master record. When you create a sales order, you simply call up a list of cards for the customer using the matchcode on the payment card number field. The system automatically copies the card data into the sales order for the card or cards that you choose from this list.
The one-time customer record is a collective account, in the master record, for a group of unrelated customers. For this reason, you cannot maintain payment card data for one-time customers.
Features
You can enter the following card information in the payer master record:
Card type, for example VISA, MC, or AMEX
Card number
The system checks the card numbers you enter to ensure that they correspond to the numbering standards of the relevant payment card company (for example, checking to make sure that a Visa card number begins with "4").This reduces the risk of having to go through a lengthy authorization process in the sales order with an incorrect card number.
The system also checks to ensure that a payment card belongs to only one customer. You cannot enter one payment card in two different master records.
Expiration date
Cardholder or company name as it appears on the card
Card category, such as credit card, customer card, or purchasing card
Blocking reason
If required, you can block the payment card by entering a reason, for example 01 for "card stolen". You maintain blocking reasons in Customizing for payment cards in the Billing section of the IMG.
Note
A block is for a particular payment card only. If one of the customer's payment cards is blocked, he or she may use another.
Also, a block does not effect sales documents that have already been created with the card. You can, however, run a standard search to determine all documents in which the card number is used.
Card valid-from date
Default card
You can assign a default card if there is more than one card for a customer. When you call up a list of cards for the customer in the sales order, this card is highlighted.
Hope this will be helpful...
Request you to reward points if helpful.
Thanks & regards
Abhishek Swarup -
hai ,
can we automize sales cycle from sales order creation to invoice creation,
when user saves the sales order and if the qty is available after availability check then delivery,picking,pgi and invoice has to be created automatically and the invoice should be mailed to respective user without any user intervention
regards
afzalHi,
First step in the sales cycle which is sale order, In your case if saels order is created by any downstream systesm or legacy system, then it should be configred using the IDOC mapping from that system
As you are ABAPER you are aware of what settings needs to be done for IDOC mapping
After sales order, if the Confirmed quantity is there , then you have to do delivery using the BATCH JOB in SM36
Then Picking and PGI will be also through the Job
After the delivery setup Billing job which is by using SDBILLDL
Hope it is cler,
santosh -
Multiple discounts are given at different levels of sales cycle
I have a requirement,
Multiple discounts are given at different levels of sales cycle(like opportunity, quotation etc), interlinked with document flows.
It must be assured that all the matchings must be taken into accounts and are displayed underneath each other.
ex:
discount simple : 15%
discount simple : 12%
special discount : 10%
Is it a standard functionality in SAP CRM or should we do enhancement to cope the functionality, if it is an enhancement any idea how to do that.
Regards,
VenkiFor quick assistance post testable script.
Tree processing examples using recursive CTE:
http://www.sqlusa.com/bestpractices2005/organizationalchart/
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
Multiple discounts at different levels in sales cycle
Hi
I have a requirement,
Multiple discounts are given at different levels of sales cycle(like opportunity, quotation etc), interlinked with document flows.
It must be assured that all the matchings must be taken into accounts and are displayed underneath each other.
ex:
discount simple : 15%
discount simple : 12%
special discount : 10%
Is it a standard functionality in SAP CRM or should we do enhancement to cope the functionality, if it is an enhancement any idea how to do that.
Regards,
VenkiWe have implemented following scenario.
1st level - FERT - MTO strategy - type 20
2nd level - HALB - No strategy
3rd level - ROH/VERP - No strategy -
Automatic process in sales cycle
Hi everyone
I want to know that,
What setting is required for automatic process from Delivery to Billing after creation of sales order?
And order type is OR(standard order)
Regards
prabudhYES, automation in creation of sales cycle is possible through BDC (Batch Data Communication) .HUNDREDS of Sales ordersDeliveiesPGIs--Billing docs can be created in few minutes( 10-20 minutes).This practice is adopted in many companies including my organization.Consult your abaper.
reward if helpful
regards
vikas chhabra -
Want Accounting Entries for Sales Cycle and Procurement Process in SAP
Hello Gurus,
Can some one kindly send me the accounting entries happens during Sales Cycle and Procurement Process in SAP.I will be very helpful if i get this by Friday ( tomarrow).Its a request.
Thanks,
B
Moderator: Read and respect the rules of the forumYou can visit the following link.
http://www.sap-img.com/financial/inventory-accounting-entries.htm
Also, before posting here, you should do a search in here or in Google. You would get most of your answers by searching in Google or any search engine.
One more thing. Timelines are not permitted in these forums.
Cheers,
Ravi. -
Throug Easy cost planning process in proj systems ,i want to do sales cycle
throug Easy cost planning process in proj systems ,i want to do sales cycle
i am new to proj systems module
i am trying to create 1 PS :quotation --> PS: Order > PS Billing Request>F2 Billing through Easy cost plannng methodology.
i also created till 1 PS :quotation --> PS: Order --> PS Billing Request without Material
while entering a WBS in quotation --> PS: Order --> PS Billing Request ** randomly from F4 options then system is picking but after saving , the selected WBS is not displaying.
at the creation of F2 invoicing , system is throwing an error as "Document 70000074 does not contain any items with open quantities"
Pls guide me in a better way even i dont know the full funda of Easy cost planning .
regdsSunitha
go through the following links:
http://help.sap.com/saphelp_46c/helpdata/en/b4/cb2d28e4ded31184080004aca6e0d1/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/51/5828e4a44c11d189bf0000e829fbbd/frameset.htm
I hope these links will help you. -
Hi all,
I am new to CRM.
please tell me What are sales cycle, opportuntity, quotation in CRM ?Hi Vishal,
The sales cycle of a product or service begins when an opportunity for sales is recognized. This can arise by chance, for example, if a sales employee finds out about a worthwhile investment project during a conversation.
The process ends with a sales order or a rejection from the customer. In the meantime, various sales activities, such as sending information material, customer visits, product presentations, quotations and contractual negotiations, take place. An opportunity goes through a sales cycle which is divided into various phases. Specific sales activities are carried out in these phases.
for more information abt opportunities
http://help.sap.com/saphelp_crm60/helpdata/en/89/3e6641ffb68147e10000000a1550b0/frameset.htm
pl reward points if helpful to u
regards
Manohar -
hello friends
what is the diff. between business sale cycle and customer sale cycle
regards
shyamHi,
Business sales cycle is the trend followed by the business as a whole which includes both inward as well as outward movements for particular business unit.
Whereas customer sales cycle is related to overall sales transaction by a customer for specific company.
Hope the answer meets your query.
Regards -
what is sales cycle?
hi
the process from where the customer approches the business to till the order is delivered to the customer..
in SAP this process starts from the Enquiry - Quotation - Order - Delivery - Billing
in real time its not must that the process has to start from Enquiry.. usually customer directly places the order and the rest of the process is continued..
sometimes there are situations where goods are delivered with the order reference..
below is the config part of Sales Cycle
Sales Order Cycle:-
Step 1: Sales Document Type
IMG > Sales and Distribution > Sales > Sales Documents >
Sales Document Header:
1. Sales Document Type:The sales document types represent the different business transactions, such as Inquiry, Quotation, Sales Order, etc. To create new sales order type, always copy as with reference to similar sales order. If possible use standard sales order.
2. Define Number Ranges For Sales Documents: Maintain number range with discussion with core team.
3. Assign Sales Area To Sales Document Types:
A. Combine sales organizations / Combine distribution channels / Combine divisions: Ensure to maintain these, else Sales Order creation will give error.
B. Assign sales order types permitted for sales areas: Assign only required Sales Order Types to required Sales Area. This will minimize selection of Sales Order Type as per sales area.
Sales Document Item:
1. Define Item Categories: If possible use Standard Item Category. Incase if required to create new, copy as from standard & maintain New.
2. Assign Item Categories: If possible, use standard. Formula for deriving item category: Sales Document Type + Item Category Group + Usage + Higher Level Item Category = Item Category
Schedule Line:
1. Define Schedule Line Categories: If possible use Standard Schedule Lines. Incase if required to create new, copy as from standard & maintain New.
2. Assign Schedule Line Categories: If possible, use standard. Formula for deriving Schedule Line: Item Category + MRP Type / No MRP Type.
Step 2:
IMG > Logistic Execution > Shipping > Deliveries >
1. Define Delivery Types: If possible use Standard Delivery Type. Incase if required to create new, copy as from standard & maintain New.
2. Define Item Categories for Deliveries: If possible use Standard Item Categories for Delivery Type. Incase if required to create new, copy as from standard & maintain New.
3. Define Number Ranges for Deliveries: Ensure to maintain number range.
Step 3:
IMG > Sales and Distribution > Billing >
1. Define Billing Types: If possible use Standard Billing Type. Incase if required to create new, copy as from standard & maintain New.
2. Define Number Range For Billing Documents: Ensure to maintain number range.
3. Maintain Copying Control For Billing Documents: Maintain relevant copy controls such as Sales Order to Billing, Deliver to Billing, etc.
Rewared if Useful
Thanx & Regards
Naren...... -
Hi All,
I want to know Order to Cash(O2C) cycle.Please explain.
-PalluHi Pallu,
The order to cash is followed when a product is sold to customer directly. The process involves in creating a inquiry for a specific product by a customer, which is followed by a quotation by many vendors. once a comparision of quotations are done by the customer the customer selects a particular vendor (goods suplier) to fullfill his material requirement. Later they create a value based contract or quantity based contract (a value based contract specifies that the customer will be suppling 10000 pc of contract within a period similarly a value based contract is like saying the vendor will supply goods worth 1000$ with in the contract period ). release orders/Sales orders will be created following the contracts. followed by delivery of goods. Invoce will be generated and sent to the customer.
hope this helps,
Arun.S -
Automated Sale cycle within two company codes
Hi to all,
i have a requirement:
there are two company codes A and B. A transfer goods to B through sale/purchase cycle and B sells goods to the customer.How can the system be automated?
to be more specific:A sells goods to B which is intercomapny sales and B finally sells to customers.requirement is as soon as B generates delivery and billing ,automatic order delivery and billing should happen from A to B with different prices.
Waiting for the response.
thanks
NakulHi,
you can solve this with 2 schedule agreements and douplicate of the idoc´s, if you work with idoc´s
or you can work from A to B with a purchasing and B to customer with a sales order.
For the second process, you can work with a message EDI into purchasing document, which create autom. the sales order for B. EDI-Type = ORDERS with type Orders05. Definition for WE20 must be logistic system.
Regards
Nicole -
In FD32 why credit value is calculating at cash sale cycle
Hello Every body
In credit management, customer having credit limit and also having in ova8 it is static credit limit check in sales order level.
My question while customer take cash sales in sales order level, he adopted payment terms as cash sales.
In system created order - delivery - invoice and later i am verified in FD32: credit value is calculating.
My question while doing cash sales credit limit it should not calculate.
Please give me your valuable advises
Thanks,
PrasadHi,
Ideally your cash sales order type is different from the normal sales .
So in OVAK , do not assign the check credit and credit group. Leave it blank.
So system will not performed the credit check for cash cycle .
Hope this will resolve your issue.
Regards,
Krishna O
Maybe you are looking for
-
I recently got my iPhone 5 unlocked and the other day I updated my phone to ios 7. After doing so my phone shut off and turned on and it said I had no service. I guess it completely wiped out my unlock. I was wondering if anyone knows what I can do t
-
JVM process is suddenly crashing
Hi ! since a couple of days (yesterday once, today twice), my weblogic process is dying ! I<ve looked at the log files (app log and http request logs) and nothing bad seems to happen. Does anybody have a clue of what is this ? can it be memory proble
-
What will happen if I try to install XP SP1 under Boot Camp?
Hi all. I'm new to the discussion and to the Mac world. Before I go buy XP sp2 or sp3; does anyone know what will happen (nothing will work or limited functionality) if I try to install XP SP1? Don't want to try it if I'm going to "break" something..
-
Hi I have configure ESS/MSS on EP 6.0 and backhand is ERP2004 when i click personal information iview i get following error no jcoMetadata found for RFC function &\#39;ISR_COMPLETE_NOTIFICATION since i mantaioned all JCO accoring to help document. ho
-
2007 MacBook Pro issues after migration from 2011 iMac
I recently bought a used 2007 Macbook Pro. I was not very familiar with migration, and I realize now I should have done a bit of research before migrating from my iMac (mid 2010) running 10.8.5. I saw the message saying I should update software, but