SD VA45 add WBS in report
Hi,
How can i add the WBS element in the list of contracts. The report is already enhanced with structure VBMTVZ.
Kind regards,
Ruth
Substitution of business area with profit center works fine even if
you make bank clearing as actual account.
Please follow the steps given below:
1.In the table FLQGSBER_SUBST you need to append structure with fields
ZZPRCTR and ZZPROJK.
2.In t.code FLQC2, check the flags 'Business Area' and 'BA Freely
Assigned'.
3.In field 'Business Area Check' enter the value
'FLQ_DATA_GSBER_SUBST' and in field 'Bus. Area F4 Help' enter the
values as 'FLQ_F4HELP_GSBER_SUBST'.
4. Create two function modules ZFLQ_ASSIGN_FI and ZFLQ_ASSIGN_REX with
signatures similar to function module FLQ_SAMPLE_ASSIGN_FI and
FLQ_SAMPLE_ASSIGN_REX respectively in customer namespace. The function
modules are used in FLQAC/FLQAD in selection screen exit fields. The
code for the two function modules as follows:
DATA: LF_GSBER_SUBST LIKE FLQGSBER_SUBST.
Fill Custom-Append fields
LF_GSBER_SUBST-ZZPRCTR = P_BSEG-PRCTR.
LF_GSBER_SUBST-ZZPROJK = P_BSEG-PROJK.
Get artificial GSBER key
CALL FUNCTION 'FLQ_KEY_GSBER_SUBST'
EXPORTING
I_GSBER_SUBST = LF_GSBER_SUBST
IMPORTING
E_GSBER = P_GSBER
EXCEPTIONS
CR_FAILURE = 1
OTHERS = 2.
P_SUBRC_GSBER = SY-SUBRC.
With the above implementation of replacing GSBER with PRCTR you dont
have to worry about lengths of fields GSBER and PRCTR.
Similar Messages
-
Sale order - Wbs element Report
Hi
Is there any report for sale order wise wbs element report.
In my sale order i will give wbs element and now i want to check "for one sale order , what are the wbs elements"You can check the WBS for a sales order from the table view of VBAP.
The WBS field is PS_PSP_PNR.
Goto SE16 and give VBAP.
Enter your sales order number and execute. Look for your WBS elements in foeld PS_PSP_PNR for the different line items.
You can also create a quick SAP query on this. -
How to add a sub report at the end of the main report whilst grouped
Hi!
I have a main report that is grouped by the Customers name and then details of transactions they did with the company.
I need to add a letter at the end of each group for each customer (With their name displayed in the letter). I tried adding a sub report in the report footer, but it only appears once at the end of the report, rather than at the end of each group for each customer.
How can I achieve the desired result?
Regards
VikVik,
You are on the right track with the sub-report.
1. Create your letter in a separate report.
2. Add the Letter Report to your original report as a sub report in the group footer.
3. Set the report links on the "Group By" field.
This will give you a letter record for each report record with the same grouping as the main report.
Hope this helps,
Jason -
WBS Element report in both currency- Urgent
hi
I want to pull WBS elements report in Both USD and CAN $ together but i do not know whr to do it.
plz tell me whr in Project System i can do this
plz help it is very urgent
Thanks
ManishHi Manish,
Use transaction code <b>CJI3</b>. When prompted, input controlling area, and on prompt for DB Profile, input <b>000000000001</b>. Input the WBS element in its field and execute. Once the report is displayed, Use the "<b>Change Layout</b>" icon to select the fields "<b>Value COCurr</b>", "<b>Value ObjCurr</b>", "<b>Value TranCurr</b>" etc. pull these across from the right hand side to the left hand side using the directional arrow. Press "Enter". The figures would now show in the report for the various currencies.
I hope this helps.
Do not forget to award the points please.
Regards,
Jacob -
Hi Gurus,
I have requirement to add rows in report FBL1N in order to display all item per document ( like in document overview ) in the same screen.
I applied note 112312 to display offset a/c (BTE with FM LINE_ITEMS_GET_GKONT) but partialy resolve my pb that is one item is displayed.
I would like to know how to do this, if i have to use BADIs (such BADI FI_ITEMS_MENUE01 ) and witch one or clone de STD or customazing.
Thanks in advance.Ok,
trx FB1N, after selection give me :
DocumentNo Type Doc..Date Offst.acct
5300029134 TL 22.05.2007 600819 => one account per document
5300034345 TL 07.06.2007 600819
5300038636 TL 21.06.2007 600819
5300038637 TL 21.06.2007 600819
4200014129 FA 28.02.2007 40811030
4200012196 FA 31.03.2007 40811030
4200013351 FA 31.03.2007 60640000
details of fisrt document (n° 5300029134) give 4 line items :
Itm PK Account Account short text Amount
1 25 600819 LYRECO 20,524.36
2 39 600819 LYRECO 20,524.36-
3 50 51110040 BN att FGX LCR n.D. 20,524.36-
4 40 51119800 En cours E à P 20,524.36
my requirement is to display 3 account ( 600819, 51110040 and 51119800) given in details of document in column Offst.acct when excute FBL1N in stead of one. like this :
DocumentNo Type Doc..Date Offst.acct
5300029134 TL 22.05.2007 600819
5300029134 TL 22.05.2007 51110040
5300029134 TL 22.05.2007 51119800
5300034345 TL 07.06.2007 600819
5300038636 TL 21.06.2007 600819
5300038637 TL 21.06.2007 600819
4200014129 FA 28.02.2007 40811030
4200012196 FA 31.03.2007 40811030
4200013351 FA 31.03.2007 60640000
I hope that is more clear,thanks fo your patience. -
I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks.Hi,
I have a question. This application retrieves SSRS reports from the report sever. When I download the reports
from the SQL Server I can open them in visual studio 2008 but they don't open in visual studio 2010. I can access the application files on visual studio 2010 and team foundation server 2010. I was unable to open team foundation server 2008 on visual studio
2008. The issue is that I am unable to add a report with a new name to the application. I use visual studio 2008 to deploy the reports on the report server but it has to be the same name to be able to run the report from the application. I can deploy any report
on the report server but I can't access it from the application unless it has to be the same name as the present reports. If I keep the report the same name then it will replace the old report and the new report will run from the application. But only if it's
the same name. I guess when I add a new report to the application with a new name I am supposed to add a definition in the application C sharp files on visual studio 2010 so that the new report will show in the application. What's your opinion
? I have attached 2 images of the application and team foundation server 2010 and the report server.
Thanks. -
How to give right's for only add wbs in primavera
hi
i have query to how to set security in primavera P6 v7 only user can add wbs not delete wbs so how can i set security privilege.CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
Hi Gurus,
We have a requirement of developing WBS costing Report( detailed and summary) in 3.1i version.The specifications considered are as per below.
Actual cost details been captured from relevent POs and Project related Orders aganist WBS, However, for planned cost details, we are finding some discrepancies aganst std, SAP report.
Could you please clarify the following?
How to capture planned cost aganist WBS( ex: POs etc..), what are all the areas need to be covered?
Has anybody developed Z report or the above? if so, please provide the specs/functionality
We had refered relevent SAP std reports ( CJ7M, CJI4) for getting required inputs, but no luck!
Thanks in advance,
KiranHI,
Inorder to get all the actual costs on activity which is actually on WBS. You can do an enhancement. This enhancement should find the all POs against PR which belongs to an activity and will repost the costs that is being posted on WBS on GR to the concerned activity.
Regards,
Anjali -
How to add an embedded report to custom UI?
Dear colleagues:
Since now I am doing investigation on this:How to add an embedded report to custom UI , so do you have some guideline doc for this?
Requirement is:
Customer want to add a custom report to a custom FS page. And it has some standard fields from contract. So do you have any ideas about this?
Thanks & Best Regards,
QiangHi Jens,
Attachment is the guideline for how to add an embedded report to custom UI. However, so far as i know, there still a limitation that is about inport parameter.
For example, now can show all data of accounts. but i just only want show one account data when click account. so you can share to us if you have any idea about it.
Thanks &Best Regards,
Qiang -
How to add characteristic in report without having in the multi provider.
Hi All,
I need one requirement to add characteristic in report that is not available in the multiprovider . That field is available on the table level in the BI. How should i bring same field into report level with out adding MP. Note : should not add new filed in to exiting flow .
Please give suggestion how do approach this scenario .
Regards,
Veera.Hi ,
If you are working in BI7 then u can use infoset to join the cube and charecteristic(the field that ur going to add), I hope your infoprovider is a cube.
Jay -
Change font of a cell in add Table to Report
Hello,
Is there a way to change the font of an individual cell in the add table to report VI?
Also is it posible to change the column width of a selected column?
Thanks
DanHi Dan,
i think to get what you want you can only use a html report. There you have to create your own "HTML Report Table Row.vi" with the font tags for each cell.
Mike -
How to add collection to report as data source
Hi all,
i'm trying to add collection to report as data source:
List<DmsLockingItem> items;
ReportClientDocument rcd = new ReportClientDocument();
DatabaseController dbc = rcd.getDatabaseController();
dbc.setDataSource(items, DmsLockingItem.class, "tName","tName");
this works with com.businessobjects.crystalreports.sdk but not with rasapp.jar.
And i can't use plugin lib in my current project.
can anyone help please?
Greetings,
NikolasThe setDatasource expects the object passed to either be a DataSet, java.sql.ResultSet, IXMLDataSet, or BusinessView object. Are you able to convert your collection to one of these?
-
How to add results to report from sequence call disabled in report options ?
Hello,
I need to add text to report from a sequence called by a sequence call. The record results option for the sequence call is disabled because the sequence call is normally done thousands of times. Therefore, I don't want to fill in useless text in the report. But, if a certain condition in called sequence fulfills, I would put a text into the report. (Yes, this is related to a sporadic communication problem with the instrument which I want to record into the report.) Which options I have ?
I have attached an example which doesn't add the text from the sequence to the report.
Regards,
Petri
Attachments:
report test.seq 45 KBHello Ray,
I encounter same behaviour with NONE adapter action step with post-expression as with a statement step as in my first example. With other words, if record results in sequence call in mainsequence is disabled, I cannot get any records into the report.
Attached a modified sequence using NONE adapter action.
Regards,
Petri
Attachments:
report test.seq 53 KB -
How to add another new report painter in existing T-code?
HI,
Can someone guide me, how to add a report painter report ZAL into a existing T-code?
My T-code contain 2 report, now i wish to add a new one. So when user execute this T-code, we can see these 3 report.
ThanksHi,
add the new report to the report group (T-code GR52) where the 2 already existing reports belong to.
In report painter you don't execute a report but always a report group including one or more reports.
Best regards, Christian -
Add on XL reporter : Wrong executable digital signature for Add on
Hi Experts,
I have a client who gets this error 'Add on XL reporter : Wrong executable digital signature for Add on' when they try to login. They are on 2007A PL45. This happens on the server as well as on clients. Uninstalll and reinstall of client didn't work. We had a look at the AddonLocalRegistration folder to see if XL reporter is registered but can't see any.
I have found a similar link in the forum but that says about 2005b.
Any help will be appreciated.
regards
JohnsonSir,
Please do the following steps :
1. Please go to the SBO-COMMON database, find table SARI, you will get
the data entry for your Addon. Please check the value of field
"AddOnChk". This is the digital signature of Addon executable file.
2. Then go to installer package of the Addon, open the ard file
(XLReporter.ard) with notepad then check the value of "addonsig".
3. Compare these two values, if they are different, please overwrite
"AddOnChk" field in database with the value of "addonsig" in ard file.
and then try to start the addon again.
4. If there are the same, the ard file or the executable file has been
corrupted. I would like to suggest you remove the installer package
from your machine, and download a fresh installer of Addon from SAP
Service Marketplace. After that, please follow the steps as per the
attached note ( Note no. 819501 ) to make your machine clean and
then install the addon again.
Regards,
AVTAR SINGH
Maybe you are looking for
-
true or false: using pngs (specifically png-8's WITHOUT alpha transparency, but with gif-style 1-bit transparency) adds load time to a page versus a comparable transparent gif of the same file size. I have been told this is causing some latency and i
-
Takes a long time to load then freezes up often(firefox not responding)
this is on home computer not this laptop (yet) . slow to change pages or just stops all together.freezes upon change of web sites.
-
Dear CONS In purchase order item details condition tab I entered gross price, discount, fright, tax amount. The total ( effective price) comes certain amount. in the same codition tab in upper portion ( item details) qty as well as net price
-
ProBook 6550b: No audio to 3.5mm output and speakers
Hi, Product: notebook ProBook 6550b Prod number: WD700EA#ACB Operating System: Windows 7 Enterprise 64 bit Changes made to system before the issue occurred: installed an audio driver "Version: 6.10.6341.0; 5.10.6341.0" (30 Jun 2011) Problem: no outp
-
IMessage not working even after 'fix'
My iMessage on my iPhone 4 is not working. Phone is updated to most recent update. Sends iMessages to some people but not others and the people who I cannot send to also can't send to me, regardless of being on wifi or mobile network. I have tried th