WBS Costing Report

Hi Gurus,
We have a requirement of developing WBS costing Report( detailed and summary) in 3.1i version.The specifications considered are as per below.
Actual cost details been captured from relevent POs and Project related Orders aganist WBS, However, for planned cost details, we are finding some discrepancies aganst std, SAP report.
Could you please clarify the following?
How to capture planned cost aganist WBS( ex: POs etc..), what are all the areas need to be covered?
Has anybody developed Z report or the above? if so, please provide the specs/functionality
We had refered relevent SAP std reports ( CJ7M, CJI4) for getting required inputs, but no luck!
Thanks in advance,
Kiran

HI,
Inorder to get all the actual costs on activity which is actually on WBS. You can do an enhancement. This enhancement should find the all POs against PR which belongs to an activity and will repost the costs that is being posted on WBS on GR to the concerned activity.
Regards,
Anjali

Similar Messages

Report Painter/Writer Ctr & WBS costs

I think I've tried every possible variation to bring the appropriate CTR/WBS costs. Here's what I'm trying to do:
1. See in one reprt both the CTR planned costs and the WBS planned costs where the cost center is assigned to the WBS as a responsible CTR.
2. Added the characteristic "Import CTR Data" into either a row or general data selection as well as adding object types WBS, ACT, PRJ, and CTR.
3. I can get the WBS to display as a line item with the planned costs, but when I do it changes the credit balance on the CTR to a positive value. This is after I run plan reconciliation for the CTR, and I have integrated planning turned on.
Example:
Postings:
WBS Labor CE: $100
CTR Labor CE: -$300
Report:
Total CTR LAbor balalnce $100
WBS displayed with $100.
When I remove the WBS and Import CTR Data i get the $-300 balance on the CTR. So I'm guessing it's not possible to bring these two objects into the same report to show the CTR over/inder absorption with WBS visibility.
Any suggestions would be appreciated.
Jim

Cost center...that's the abbrev. used in report painter. As an update the problem seems to stem from the fact that I've added the WBS charateristic to the line and exploded it. when I do this I lose the credits to the cost center. Any idea?

Network / WBS Costing

Hi Gurus,
I am doing cost planning for the project.
I have planned costs for network activities by work center planning (Labour hour rate) and added some materials in the project.
Now when I try to do cost planning on WBS in Transaction CJ40, the network planned costs are appeared in order/network column.
If I enter any cost as planned cost against WBS, it gets added to network cost.
The requirement is, I want to take a reference of Network/Order cost and that should be converted to Cost Planin CJ40.
Requets you to kindly suggest, how can I do network cost plan and then do WBS Cost plan using that as a reference.
Thanks in Advance

Hi Parimal,
I'm facing exactly the same issue as yours below:
"But when I run Progress report on Project (CNE1 & CNE5), it considers only cost plan on WBS (CJ40). System does not consider the plan cost on Network activities for POC calculation.
This leads to an error on POC reporting."
How did you fix this one?
Thanks
Emmanuel

WBS COST

Hi Experts,
I have an issue.The scenario is like this.I have to make some Procurement against a WBS. But i dont want the cost to be booked for this procurement in WBS. Rather I want the cost to occur only at profit center which have been assigned to WBS.
The WBS is from a project which is for some other Plant.But production is taking at other plant so they are making the procurement for this wbs.In the WBS, profit center has been assigned which belongs to second plant. So when the first plant will run the cost report the cost will come in wbs, At the same time cost will appear in profit center of second plant.
My req. is that cost should only go to profit center and when I will run the cost report for wbs it should not appear.
Regards
Brijesh

Hi Brijesh,
Further to what Sudhir has written:
Once you make your WBSE statistical you'll need to provide 'Actual cost Center' i.e. the cost center where the actual cost will be posted upon some relevant transaction such as Goods receipt or IV.
The cost on the WBSE will be recorded with Value Type 11 (Statistical Cost) where as the cost on your Cost center will be recorded with value type 4 (actual cost).
Hence in your Cost Reports you can filter out value type 11 so that the users do not see it as a cost in the WBSE cost report.
with regards,
Ravi Shrivastav

Open Balance on Sales Order Cost Report

Hi SAP Group -
I have a couple questions about the settlement of manufacturing variance to COPA.
When our settlement process is complete (production order and sales order both settled to COPA), there is a balance remaining on the sales order cost report which is equal to the manufacturing variance on the production order.
It seems that the manufacturing variance is posting from the production order to the sales order, but is not being assigned to the PSEG and flowing to COPA.
I am looking for advice in two areas:
First, how do we "clear" these balances on old orders that are already settled?
Second, how do we prevent this from happening on future orders?
Thanks !!!

Refer to OSS 183250 and note 186485.
If you dont specify in the settlement profile for the production order that the variances are not transferred from the production order into CO-PA, you will settle the variances to CO-PA twice: once from the production order (broken down into variance categories), and once from the sales order item. The settlement rule still references the material and not the sales order item.
Special Features of Product Cost by Sales Order with Valuated Sales Order Stock
<a href="http://help.sap.com/erp2005_ehp_02/helpdata/en/90/ba66cc446711d189420000e829fbbd/content.htm">Read the topic on 'Special Features of Product Cost by Sales Order with Valuated Sales Order Stock'</a>
You may want to check the period of the variance settlement from mfg order to sales order and ensure the settlement of sales order is also done the same period, if the type is PER.

Sale order - Wbs element Report

Hi
Is there any report for sale order wise wbs element report.
In my sale order i will give wbs element and now i want to check "for one sale order , what are the wbs elements"

You can check the WBS for a sales order from the table view of VBAP.
The WBS field is PS_PSP_PNR.
Goto SE16 and give VBAP.
Enter your sales order number and execute. Look for your WBS elements in foeld PS_PSP_PNR for the different line items.
You can also create a quick SAP query on this.

What is the meaning of Rem.Order Plan in the PS cost report S_ALR_87013558

Hi,
Does anyone know the meaning of "Rem. Order Plan" column in the PS Budget-related cost report-- S_ALR_87013558 Budget\actual\Commitment\Rem.Plan\Assigned? I understand all the other columns like budget, actuals, commitment and assigned, but I have no idea what the "Rem order plan' means?
Thanks,

In this report it is "Planned Cost - (Actual + Commitment)"
Venkat
Edited by: VenkatSrinvas Konda on Oct 16, 2008 8:09 AM

Plan value(break up) not appearing in sales order cost report

hi
I have done sales order bom in cs61,operation in ca01,in va02 for sales order costing in itemization showing like
material 100
actity 10
total 110
saved and if I see in cost report it show only revenue , cogs(110),but it is not show raw materials and operations.
please advise me what to do?
Thanks and Regards,
Nagesh

Dear Nagesh,
Probably, you need to check the status of the BOM and the Routing in the Header. It should be active/released.
Kind Regards
Umapathi G
Edited by: Umapathi Naidu G on Aug 11, 2011 3:26 PM

WBS Element report in both currency- Urgent

hi
I want to pull WBS elements report in Both USD and CAN $ together but i do not know whr to do it.
plz tell me whr in Project System i can do this
plz help it is very urgent
Thanks
Manish

Hi Manish,
Use transaction code CJI3. When prompted, input controlling area, and on prompt for DB Profile, input 000000000001. Input the WBS element in its field and execute. Once the report is displayed, Use the "Change Layout" icon to select the fields "Value COCurr", "Value ObjCurr", "Value TranCurr" etc. pull these across from the right hand side to the left hand side using the directional arrow. Press "Enter". The figures would now show in the report for the various currencies.
I hope this helps.
Do not forget to award the points please.
Regards,
Jacob

Costing Report to Check the Result of MR21

Hi all,
I have tried to change the Sales Order Material Value with MR21. The results can be checked with MB52.
However, I want to check the actual results in accounting and costing aspect.
Could suggest any costing reports that can trace and analysis the costing Sales cost?
Cheers,
Simon

Hi Simon
Use T code CKMPCD and you can see the Price Change docs... You can filter the docs based on Mat No / Period/ etc
It will show you the desired acc/CO docs
Br, Ajay M

Vendor Cost Report

Could any help me to find the table fields for the following information to develop Vendor Cost report?
Material
Primary Vendor No.
Primary Vendor cost
Date Received
PO No.
Vendor No.
Receipts
Vendor cost
Cost Deviation
Thanks

Senthil,
There are SAP Standard reports like ME2L ,ME2M,just look at souce code.
you will find more information on Tables and fields.
Thanks
Seshu

Control Costs not Displayed in Process Order Cost Reports

Hi
After Variance calculation and settlement of Process Orders also COntrol COst appearing as Zero, is there any step I am missing or any configuration needs to be adjusted?
Thanks in Advance
Regards
Venkat

Hi,
I checked in IDES system as well, there also using standard settings control costs are not getting updated on the process orders.
I couldn't makeout how the control costs fields get updated in the process order cost reports
Regards
Venkat

Production costing - report

Hi All,
I have newly started working on production - costing report. Please send me any ppt files or pdf files ,, to understand the production costing procedures and concepts.. so that be comfortable in working on that.
regards and thanks.

Hi
I would recommend the product drilldown reports in KKO0...
For this you will have to do settings in OKN0 (Asisgn a Cost Comp Structure and specify the Product Group)
After this, execute KKRV to collect the summarized data and then you can use KKO0 reports
It gives cost of production as per the Cost Comp Str and also the product no, product group, Prod Order etc
Regards
Ajay M

Doubt in Absorption costing reporting through SAP

Dear Experts,
My clent want absorption costing.
Fixed production OH is considered under closing stock valuation and will be opening stock in next month.
I am explaining my prob through example.
March -
April
Sales----
5000 -
10000
Production -
10000 -
5000
Rs -
Rs
Selling price per unit----
100 -
100
Variable production cost per unit -
50 -
10
Fixed Production OH cost incureed -
100000 -
100000
Fixed production cost per unit -
10 -
10
Selling and distribution cost----
50000 -
50000
Particulars -
March -
April
Sale (5000100):(10000100) (A)----
500,000 -
1,000,000
COGS
Opening Stock -
nil -
300000
Add:
Variable Production cost (1000050):(500050)-----500000 -
+250000
Fixed Production OH (10000100);(500010)------100000 - 50000
Under absorbed Prod OH -
nil -
+50000
opening stockvariablefixed+under prod oh -
600000 -
650000
Less : Closing stock (5000*60) -
300000 -
Nil
(B) -
300000 -
650000
GP (A - B) -
200000----
350000
Less: Selling-- -50000--
-50000
Net profit -
150000 -
300000
In the above example closing stock contains my fixed overhead and transfer the same with opening stock in April as 300000(250000 variable oh+50000 fixed OH)
But in copa when i am doing reporting for the month of april revenue of 1000000(10000100) units and cost(var+fixed) 600000(1000050 as variable oh + 10000*10 as fixed OH) will transfer from product costing to Copa.
But fixed oh is 150000 (50000+100000) in above example.
How to transfer 150000 as fixed OH in copa instead of 100000 for the month of april.
Your help will be highly appreciated.
regards
RR

Hi,
If on 1st April you have this information thro a product costing report then the easiest way to transfer to COPA is via KE21N transaction
regards
Waman

Planned /actual cost report in iw31

Hi Gurus
Is there any method to see individual component cost while creating order (IW31) in pm. I tried with planned/cost report button on the cost tab by including material and material text in the layout, but when I execute the material and text is blank and I am unable to see individual material wise cost.
Kindly help.
Regards
Vidhyadharan

Yes it a business requirement.
while creating reservation, the user should be aware that he is drawing a high value item.
for eg. One of the component of the Assembly has failed, and it has to be replaced, the stores does not have the stock, it takes time for that component to get reparied, since it is time consuming,and the production been affected, the engg replaces the entire assembly by drawing from the stores. Since the engg does not know the cost, he should be made aware that he is drawing a high value item from the stores , which he has to take an oral approval from the higher authority.
Regards
Vidhyadharan

WBS Costing Report

Similar Messages

Maybe you are looking for