SDF LDB doesnt pick up documents posted in specific ledger

Hello,
I have created a new G/L account 999998 in Q43/700 system and enabled 'Clearing specific to ledger groups'. I created a new ledger C2 and assigned it to the ledger group C2. I have also made a posting to this new G/L account. The table FAGLBSIS contains the entries of the posted document 8900000002/cl99/2009. When I execute the program RFCLLIB02 (general ledger for Chile and peru) with the ledger as C2 in the selection screen, the document is not picked up. The event GET BKPF doesn't pick up this document. I am using SDF as the LDB. I am not sure why the document is not picked up? Have I missed any setting? Please help !
Best Regards,
Vittalkesari G

I got the root cause behind this problem. The SDF LDB cannot pick up the documents posted in specific non-leading ledger.
The ledger selection of the SDF refers to the balances which can be displayed by the logical database.
Therefore the ledger restriction is also stored in the area of the selection screen for the balances.
Also the SDF only works from a document side for accounts which are u2018line itemu2019 or u2018open itemu2019 managed.

Similar Messages

How does system automatically picks up document type when you enter INV?

1.How does system automatically picks up document type when you enter Invoice?
2.What is Algorithms? Where is it used?
3.What is the use of Customer Ledger Inquiry?

The document type is hard coded by the system. Look at UDC table 00/DT for the document types in your system. Notice that some of those are marked as hard coded/reserved by JDE. You may wish to dowload the Accounts Receivable manual and read that to learn more about the document types.
Not sure what you mean by algorithm, unless you are looking for how the system determines what document type to assign on invoice entry.
These comments apply to accounts receivable and to JDE World, since you posted in the JDE World forum and are talking about the customer ledger inquiry. If you are in Enterprise One and asking about Accounts Payable, then this reply can be ignored (though Enterprise One works pretty similar to World in this respect).
What is the use of the Customer Ledger Inquiry. To view accounts receivable detail history for a given customer, viewing on line. Whomever works in the accounts receivable department will likely use the Customer Ledger Inquiry quite a bit.
Hope this helps a bit.
John Dickey

How to add line items to Accounting Document posted through MIRO ?

I need to perform Additional posting when Posting through MIRO transaction..i tried with INVOICE_UPDATE BADI but this was not useful...Please let me know if there is any way to add additional posting to Accounting Document created through MIRO.
If any user exit , BADI ot BTE present?

Hi,
Check the BTE's:
00001020     POST DOCUMENT:       Prior to final checks             SAMPLE_INTERFACE_00001020
00001025     POST DOCUMENT:       Final checks completed       SAMPLE_INTERFACE_00001025
00001030     POST DOCUMENT:       Posting of standard data     SAMPLE_INTERFACE_00001030
00001050     POST DOCUMENT:       Accounting interface           SAMPLE_INTERFACE_00001050
Thanks & Regards,
Harish

Mass reversal of documents posted using F.13

Hi Friends,
We have some GR/IR open items as on 28.02.2010, and we ran the F.13 program to clear those line items with clearing date 03.03.2010. Since all those documents cleared on 03.03.2010. In total there were 1000+ documents posted by the program.
But unfortunately user has not entered the posting date range in F.13 selection screen as 01.03.2010 to 03.03.2010. Because of this, documents related to FEB period also cleared in march and if we run the FBL3N with open item key date 28.02.2010, all items are showing open items. which is correct from the system perspective.
But we need clear, those documents posted prior to 01.03.2010, with clearing date 28.02.2010 only.
In FB08, mass reversal option, we can reverse multiple documents, only in case of open items, but not the cleared items.
My requirement is that, is there any program / way to reverse the cleared items, posted by using F.13.
We cannot use FBRA, since we have 1000+ docs.
Please advise.
Thanks,
Srinu

Hi Joshi,
Thanks for your prompt reply.
I have acheived my target, using LSMW batch input recording method with tcode FBRA to reset the cleared items.
After that, i went to F.80 and given the doc number series and did the mass reversal.
Again i did F.13, given end posting date as 28.02.2010, and clearing date 28.02.2010 and executed.
This resolved my issue.
Thanks,
Srinu

Text in accounting document posted against Excise invoice

Hi,
We have a requirement that the accounting document posted against excise invoice ( J1IEX) should display a text ( Vendor name and PO No.).
We have tried entering the text at the time of capture and posting the excise invoice.But this does not reflect in the accounting document text field.
However we can maintain the same afterwards from transaction FAGLL03.
Is there any option that we can maintain the same at the time of capturing and posting the excise invoice.
Also,if I think of defaulting the same ( Vendor name and Po no) is ther any user exit OR BAPI.
Rajesh

hi
yes is their in this go to spro->img->Logistics - General->Tax on Goods Movements->India->Basic Settings->Maintain Excise Groups
in this for your excise group in *migo settings please put the tick mark in post ei in migo the at the time of migo only the excise invoice will be posted. no need of doing the ji1ex here.
Thanking you

CIN: How to check the material document posted without excise invoice

Hi Guru,
Please advise how to check the material document posted without excise invoice.
I have tried tcode J1I7 but it seems start to collect the excise invoice first and then material document.
But my case is to find the material document WITHOUT excise invoice for internal tracking purpose.
At the moment we start from tcode MB51 to get the list of material document and check in J_1IEXCHDR / J_1IEXCDTL
Best regards,
Pakorn

Hi,
Try creating a Query in Tcode SQVI by combining tables MKPF and J_1IEXCHDR/J_1IEXCDTL for your requirement.
Check these threads how to create Query.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6018c1ae-8c44-2d10-6ea9-c3fad2c82880?QuickLink=index&…
http://ptgmedia.pearsoncmg.com/images/9780672329029/samplechapter/0672329026_CH03.pdf
Regards
Binoy

How do I attach a folder that contains multiple documents? I try and it will only allow me to pick one document at a time.

I'm trying to upload to my school's online blackboard (which is where I submit papers) and I cannot seem to figure out how to upload a folder I made on my desktop. I created multple folders containing more than one document and thought this would be easier then each individual document. But I cannot attach the whole folder. I have to pick each document which I could have done in the beginning!! Any thoughts? I tried to hit shift and then control to highlight all of them but that did not work. Any advice welcome:)

Geiger,
This is what you get when you key the word sections into the help function:
*Creating Sections*
+In a word processing document, a section consists of one or more pages.+
+Each Pages template consists of one or more predefined sections. Every time you add pages to the document by using the Sections (word processing) or Pages (page layout) button in the toolbar, you add a new section.+
+In a page layout document, each page is one section. You can use the predefined sections as they are, or you can modify or remove them one page at a time.+
+In a word processing document, you can use the predefined sections as they are, or you can create or remove section breaks to define your own sections. To add a page to a section, add more content and pages will be automatically added, or insert a page break.+
+Here are ways to work with section breaks in word processing documents:+
+To insert a section break, place the pointer where you want the break to occur, and then choose Insert > Section Break or click Sections in the toolbar and choose an item from the list.+
+When you show invisibles in your document (click View in the toolbar and then choose Show Invisibles), a section break symbol marks the location of the section break.+
+The new section has the same formatting as the previous section until you change it. Changes you make to master objects, headers, footers, or page numbering will apply only to the section in which you make the changes. See Using Master Objects (Repeated Background Images) for information about master objects.+
+To remove a section break, click at the beginning of the line that follows the break and press the Delete key.+
-Dennis

Error while doing Parked document posting in FBV0

Hi,
I am getting the below dump error while doing FBV0 - Parked document posting. Can you please help me to fix this.. I have also maintained FBVB. But still i am facing this.
Thanks
Sunil

Error details missing, like error message no, error text.
Regards,
Gaurav

UOM group error while material document posted throgh BDC( MB01)

Hi All,
we are facing issue while posting material through MB0-goods reciept
error "UOM group not maintaineed for 'XXXXX" material" for some line items,
and i have checked in material master data, UOM group not maintained for some material,
even after maintaind UOM group for those material's still we are facing same problem,
as i checked in BDC code there is no validation for UOM group,
if we posted same PO manual, document posted successfull,
please suggest me.....why this error message coming eventhogh UOM group mainted?
Regards,
Suresh.D

check this link:
Updating Function module for Material master (UoM)
BAPI for MIGO
cheers
Aveek

Parked document posting - Budget period screen field error

Dear Experts
We are working on FM BCS, While posting of the parked document through Transaction FBV0 we are getting the below error message.
"Field BSEG-BUDGET_PD. does not exist in the screen SAPMF05A 0302
Message no. 00349
Diagnosis
The specified field does not exist on the screen.
Procedure
Check your batch input data
We gone through the error help information and checked field status groups and found everything is fine.
We can able to post direct invoices without getting any errors. The above error triggers only in the scenarios of " parked document posting".
Kindly suggest....
Thanks in advance.
Regards
Rao

Hi Mar Novalbos
Great, the note was helped a lot...
The issue has been resolved.
Thanks for your kind support as usual....
Regards
Rao

Unable to view documents posted in SAP

Hi,
I am unable to view documents posted in SAP.
Steps that i folllow:
1) I enter the tcode fbl1n.
2) Fill the details and execute
3) Click on the document number
4) Click on Environment -> Additional Assigment->Object Link
After it displays error message You are not authorized to use transaction SDV
I was able to view documents till yesterday.
I have IXOS client installed on my system.
Kindly let me know your valuable suggestions
Regards,
Yasmin

I pressume that this is not authorization issue.
Try check this..
Does the parameter for you is same like your teammate? (Transaction SU3)
To access the IXOS is there any custom table maintained to enter authentic user ID. Likely to chek with ABAPer.
In order to reset your user buffer go to SU56 and from the menu you will have option to rest the buffer. Alternatively you can get Security guys to do it in SU01(depends on table entry)/PFCG/PFUD...
Regards,
Arpan Paik

How to stop document posting when filling setup tables for logistic app.

Hello Boys
I've read several threads and weblogs about data extraction from logistic applications i.e the ones which uses the infosources like 2lis_13_vditm, 2lis_02, 2lis_03, etc, etc,and now almost every thing is clear to me but one thing: how do i actually "close the system" while the process of filling setup tables i.e MC03BF0SETUP, MC03BX0SETUP, MC13VD0ITMSETUP, are running?
So I have some questions
1) which is the procedure to prevent users from posting documents for an specific logistic applications (02,03, etc.) in a source system
3) For example when using TC OLI9BW for statistical setup from billing documents (app no. 13), there is a check box "Block all billing documents?". Is this option for such pourpose?
4) Every logistic applications has a different procedure??
thanks (with points of course) for any help
rgds
A. Garduñ

Hi Azael:
Q1: usually the BW team will inform basis/secuity about the deletion and performing of setup tables. they will fix a time after the normal hours where in all users are locked out from the system. in a sense, R/3 will be down for that time.
2. the check box which says, "block documents" is meant to block posting. for eg: you are doing setup tables late in the evening, and you assume that no user is assessing the system, but if there is a user(just by chance) who is doing some posting and when he try to save it, the system will not allow him to do save as you cheked this option.(normally we donot use this)
3. some LO may have different procedures, for eg IM. but most of them have the same functionality.
hope it helps.
assign points if helpful
kalyan

Error while reversing document posted through cash desk

Hi,
I have posted a payment through cash journal/cash desk (FPCJ) and closed the the lot. Now I want to reverse the payment, however SAP function module 'FKK_CJ_PROHIBIT_RVRSL_OF_DOCS' is throwing an error - 'reversal not performed'. Does anyone know how to reverse a payment document posted through cash journal if it's lot has already been closed?
Thanks,
Suhas.

HI Ravi,
If a payment is posted through the FPCJ and lot is closed , payment cannot be reversed that's is standard functionality, there are lot of notes on this which gives you alternative steps that need to be taken.
check note 644870.
thanks,
Vikram

Automatic clearing for document posted via FBB1 with foreign currency

Hi SAP Gurus,
Can anyone help to explain on why does the document posted in FBB1 with document currency USD was auto cleared even without satisfying the rule in OB74. But when the document currency is SGD it can be automatically cleared.
Scenarion is as below
OB74 set up:
   Accty type: S
From acct: 12000
To account: 12000
Criterion 1: Business area
Criterion 2: Assignment
G/L account : 12000
Account currency : SGD
Post JV document via FBB1:
     Dr 12000
     Cr 20000
     Document curreny : USD ; amount: 0
     Local currency: SGD ; amount: 200
     Assignment: Test A
     Business area: 'blank'
*When I run F.13 above document was cleared and the clearing doc contains below
       Dr 20000
       Cr 12000
But when I post in FBB1 with same entries as above, only changing the document currency to SGD it will not be cleared via F.13.
Appreciate your explanation on why does above scenario happened.
Thank you in advance.

HI,
while posting the entry through FBB1 then system will not consider the exchange rates as per ob08 and etc.,
you can define the local and foreign currency values as per your wish while posting the FBB1.
I hope above will clear you issue. Thank you.
Reg
Madhu M

Accounting status not "documents posted" trip can't be changed

Hi Experts,
Can you please help me on this issue ? please provide your valuable inputs ?
when user is trying to create an expense report from travel plan, getting error message , Accounting status not ' documents posted ' trip can't be changed.
Thanks in Advance.

HI Lakshmi,
Once posting is done you can't edit expense as per standard. If they want to edit expense they should do enhancement.
Regards,
Nischitha

SDF LDB doesnt pick up documents posted in specific ledger

Similar Messages

Maybe you are looking for