Sealed and unsealed management pack in scom ?

Dear all ,
What is Difference between sealed and unsealed management pack in scom?
I know like override alert can not be saved in sealed MP , is there any thing else ?
Sengo.

Hi,
A sealed management pack is a binary file that cannot be edited. An unsealed management pack is an XML file that can be edited. Sealed management packs should have an .mp extension, while unsealed management packs should have an .xml extension.
In general, management packs obtained from an application or hardware device vendor are sealed.
Although you cannot change the settings in a sealed management pack, you can still customize the applied settings of a management pack after it is imported by using overrides or by creating additional settings such as rules, monitors, and tasks that supersede
the management pack's default settings. All customizations that you create are saved to a separate management pack file.
Management packs can only reference another management pack if the management pack that is referenced is sealed
Regards,
Yan Li
Regards, Yan Li

Similar Messages

Replace unsealed management pack with sealed

Hi,
Reaching out for some advise. We have some business services imported from SCOM DA:s via an unsealed management pack and would need (for dwh/reporting purpuses) to seal this management pack so that data is correctly transfered to DWH.
Is there any way to seal the management pack and import it without removing the unsealed management pack? If we export the unsealed mp - seal it - remove unsealed mp from SCSM - import the sealed MP - we loose all information about the business services.
Any suggestions?
Kind Regards,
Ezequiel
E.O

Hi E.O,
You cannot replace the unsealed MP with sealed one. What you can try is to export/import operations using csv files.
Cheers,
Marat
Site: www.scutils.com Twitter:
LinkedIn:
Graveyard:

Cannot import sealed management pack from unsealed management pack

We have unsealed management pack imported to our scsm 2012. It has an additional dropdown list with list. But now we are now going to seal it but when we are going to import it now, it says it cannot be imported because there is already unsealed management
pack with the same name. If we are going to delete that unsealed managmeent pack, we may lost are data for that field. Is there any way for this?

As workaround you can export data to temp location (XML or something like this), remove unsealed, import new sealed and import data back from temp location. This can be easy done with SMLets
SCSMSolutions
email: freemanru (at) gmail (dot) com
I'm having the same issue as the original poster. I foolishly have been working with an unsealed management pack in our SCSM 2012 SP1, UR2 environment that contains a list of "Locations") We need this to be sealed so it will not only sync to
the DW, but also so we can reference it with new templates/workflows.
I'm hoping for an answer from Anton on more detailed instructions for this workaround, to help a newbie to SCSM and SMLets.

Exchange Server 2013 Management Pack in SCOM 2012, can not update healthset status automatically

Hi, all
I have Exchange Server 2013 and SCOM 2012 installed. I have imported Exchange Server 2013 Management Pack to SCOM 2012. Now I have a question that when there is a service not healthy, I can find the red alert in my alert view with the Exchange 2013 server,
but after the service is healthy automatically, the red alert is still there. I can only make it become green healthy status after reseting the healthset status in the healthset explorer.
Does anyone know how to make the server become green healthy status automatically after the monitor is healthy?
Thank you.
Nile

Hi,
How many Exchange Servers do you have? Does this issue only occur on one Exchange Server?
Please check the application log on the problematic Exchange server and see whether there are any related event error.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Windows client monitoring Management packs for SCOM 2012

Hello All,
Please provide the link for windows client monitor management pack for SCOM 2012 SP1 ,if there is any available .
I have got one link for this but it is for SCOM 2007 .
Regards
Richa KM

http://www.microsoft.com/en-us/download/details.aspx?id=15700
Yes you can download from this link and you can import it in scom 2012 sp1.although it is for scom 2007

Applications Management and Change Management Packs Certified with EM 10gR5

Applications Management and Change Management Packs Certified with Enterprise Manager Grid Control Release 5
For more details about the new features, documentation, and patches for the latest Application Management Pack and Application Change Management Pack releases, see:
[Applications Change Management Pack 3.0 and Applications Management Pack 3.0 Now Available|http://forums.oracle.com/forums/thread.jspa?threadID=935145&tstart=0]
Oracle E-Business Suite Prerequisites
11.5.10 with ATG_PF.H RUP5 and higher
Release 12.0.4 and higher
Release 12.1
Certified Platforms
Linux x86
Linux x86-64
Sun Solaris SPARC
HP-UX Itanium
HP-UX PA-RISC
IBM AIX Based Systems
Certification on Windows platforms is in progress.

It takes me a lof of time to comprehend the sentence you write. Cause I am a Chinese. My poor English.
I have to say "you are genius". I used to use the indesign CS2. There is no GREP function in CS2. When I get the new script, I do not know how to use it. Just when I saw the
'grep {findWhat:" +"} {changeTo:" "} {includeFootnotes:true, includeMasterPages:true, includeHiddenLayers:true, wholeWord:false} Find all double spaces and replace with single spaces.'
Being confused.
Thanks so much. It seems I have to relearn the advanced Indesign.

Oracle Change and Configuration Management packs

Hi,
We are looking at implementing the Oracle Change and Configuration Management packs.
I would be very interested to hear from anybosy who is currently using these packs.
I have done some preliminary tests, and am getting what seems like a very simple error, but i am at a loss as to how to fix it.
Will respond to replies with exact error and scenario.
thanks in advance.
melvyn

Hi Nayab,
We are looking to implement the change and configuration management packs, to automate our change control.
As part of my initial testing i have the following scenario...
I have three database (namely TEST_DB, QA_DB and PROD_DB) all configured and manageable in EM.
I have create a sample test schema in TEST_DB with tables, views, sequences, procedures and triggers.
Using EM, i am able to transfer the sample schema (with all objects) from the TEST_DB to the PROD_DB.
If i manually create the sample schema in the QA_DB, i am able to transfer the sample schema from the QA_DB to the PROD_DBm using EM.
When i try to transfer the sample schema from the TEST_DB to the QA_DB i get an error in the synchronization phase.
The capturing of the baseline, and the dictionary comparison phase complete successfully, but when i do the synchronization phase, i get
the follwing error...
SQL> ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
This seems strange because, it must have been able to see the destination database for it to complete the dictionary comparison phase, so
i cannot understand now why it cannot connect to the destination database to complete the synchronization phase.
any assistance would be greatly appreciated.
thanks
Melvyn

Unsealed Management Pack

Hello,
We have created a custom config item class and imported the management pack unsealed into our environment. We have had the MP this way for over a month and some of our SR's have the custom config item as an affected Config item. This was one of our first
custom classes and I didn't realize it would be best practice to always import these types of MP's as sealed Management packs. I can not see the class from the DW. My question is, can I just import a sealed version of this MP or do I have to remove the unsealed
MP. Will removing the unsealed MP cause me to lose all data related to it?

ya, Rob has it right, but just to clarify a bit:
you can't upgrade a unsealed MP to a sealed MP. you'll get an error about duplicates
you can't create a MP reference an unsealed mp. unsealed MPs can change in ways that aren't upgrade compatible, so nothing else can depend upon them.
any class you create in an unsealed MP will never get moved to the DW, because the DW MPSync Job only copies sealed MPs, due to versioning considerations.
if you delete the class prototype, all object of that class will be removed from the active service Manager database.
Classes (specifically sealed classes that can be referenced) have certain constraints on what counts as compatible for upgrade, i.e. all properties defined for those classes must stay the same in all future versions.
relationships to objects that are removed (for instance, because their class is removed) will be removed as well.
New objects will get new internal IDs, and not "recover" any information from the old objects. same with classes in different MPs, even if their internal names are the same.
Back to the point at hand, your best way out is exactly what Rob mentioned: Export the data to some other location, like CSV, remove your unsealed class, wait for the active database to clean up, import a sealed version, and reimport the data. be sure to
export any relationships, such as owner, created by, relates to work item, etc.

UCS management pack for SCOM

I've installed the UCS management pack for Microsoft SCOM 2007 R2. It appears to be working, however I now keep seeing all computers that have the SCOM agent installed trying to run the cisco.ucs.computer.probeaction.vbs script, which fails and generates alerts. Does anyone know why these servers that are unrelated to UCS would be trying to run these scripts, or how to fix this problem?

The Problem is that you use an “&” string in a name of one of the protection Groups.
Change the name of the protection Group where you have used an “&” symbol
. Restart the “System Center Management” and you should see that the discovery success.
If still have same issue, started to register the differtent dll’s again on the machine and apparently registering the MOMScriptAPI.dll
http://scug.be/dieter/2012/11/08/scom-event-id-21406-file-name-or-class-not-found/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Microsoft Intune Management Pack for SCOM 2012 R2

Hi,
Is Management Pack of Microsoft Intune available to monitor the Intune Alerts and view the Intune dashboard ?
Is any API available of Intune for SCOM to view the Dashboard etc..?
Shailendra Dev

Hi
Nope, there is no Management pack available. You can check the Management pack here
http://social.technet.microsoft.com/wiki/contents/articles/16174.microsoft-management-packs.aspx it is the most accurate list. For checking Intune Status check this Dashboard
http://status.manage.microsoft.com/StatusPage/ServiceDashboard
Cheers,
Stefan
Blog: http://stefanroth.net If my post helped you, please take a moment to vote as helpful and\or mark as an answer

Deployment task failed when trying to import custome management pack into scom

Hi Guys,
I've been running through the MVA course on creating management packs (MPAuthor.Stores) and am at the point where I import it into SCOM. I've managed to get all errors resolved but 1, which I can't work out.
The error I receive is
Date: 05/03/2015 16:36:59
Severity: Error
Message: Deployment task failed
System.ArgumentException: The requested management pack is not valid. See inner exception for details.
Parameter name: managementPack ---> Microsoft.EnterpriseManagement.Common.ManagementPackException: Verification failed with 1 errors:
Error 1:
Found error in 1|MPAuthor.Stores/1331b9dac17fdd35|1.0.0.0|DisplayString,ElementReference=06e6447e-352b-4dc5-72ec-3535205bb1fe,LanguageID=ENU|| with message:
Element Info with Identity DisplayString,ElementReference=06e6447e-352b-4dc5-72ec-3535205bb1fe,LanguageID=ENU refers to an invalid element MPAuthors.Stores.
---> Microsoft.EnterpriseManagement.Common.ManagementPackException: Element Info with Identity DisplayString,ElementReference=06e6447e-352b-4dc5-72ec-3535205bb1fe,LanguageID=ENU refers to an invalid element MPAuthors.Stores.
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Configuration.Verification.VerificationUtils.ThrowErrors(IList`1 results)
   at Microsoft.EnterpriseManagement.ManagementPackManagement.ImportManagementPack(ManagementPack managementPack, IDictionary`2 resources)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.ManagementPackManagement.ImportManagementPack(ManagementPack managementPack, IDictionary`2 resources)
   at Microsoft.EnterpriseManagement.ManagementPackManagement.ImportManagementPack(ManagementPack managementPack)
   at Microsoft.SystemCenter.Authoring.ProjectSystem.Deployment.Services.NativeImporter.ImportManagementPack(ManagementGroup mg, String fileName)
   at Microsoft.SystemCenter.Authoring.ProjectSystem.Deployment.Services.NativeImporter.ImportManagementPack(String fileName)
   at Microsoft.SystemCenter.Authoring.ProjectSystem.Deployment.Tasks.ImportTask.DoWork()
   at Microsoft.SystemCenter.Authoring.ProjectSystem.Deployment.DeploymentTaskBase.Run()
: Verification failed with 1 errors:
Error 1:
Found error in 1|MPAuthor.Stores/1331b9dac17fdd35|1.0.0.0|DisplayString,ElementReference=06e6447e-352b-4dc5-72ec-3535205bb1fe,LanguageID=ENU|| with message:
Element Info with Identity DisplayString,ElementReference=06e6447e-352b-4dc5-72ec-3535205bb1fe,LanguageID=ENU refers to an invalid element MPAuthors.Stores.
: Element Info with Identity DisplayString,ElementReference=06e6447e-352b-4dc5-72ec-3535205bb1fe,LanguageID=ENU refers to an invalid element MPAuthors.Stores."
I've looked all instances of "MPAuthors.Stores" in the different files, but I can't see the issue. However, I think it must be somewhere in the below
<
LanguagePacks>
    <
LanguagePackID="ENU"IsDefault="true">
      <
DisplayStrings>
          <
DisplayStringElementID="MPAuthor.Stores.Application">
          <
Name>MPAuthor
Stores Application</Name>
          <
Description></Description>
        </
DisplayString>
          <
DisplayStringElementID="MPAuthor.Stores.Central">
          <
Name>MPAuthor
Stores Central</Name>
          <
Description></Description>
        </
DisplayString>
          <
DisplayStringElementID="MPAuthor.Stores.Stores">
          <
Name>MPAuthor
Stores Stores</Name>
          <
Description></Description>
        </
DisplayString>
        <
DisplayStringElementID="MPAuthor.Stores.Store">
          <
Name>MPAuthor
Stores Store</Name>
          <
Description></Description>
        </
DisplayString>
          <
DisplayStringElementID="MPAuthor.Stores.Store"SubElementID="StoreCode">
          <
Name>Store
Code</Name>
          <
Description></Description>
        </
DisplayString>
      </
DisplayStrings>
    </
LanguagePack>
</
LanguagePacks>
Chris Gibson

Chris,
It seems that you have display strings without a module. Do you find all the elements?
You can compare with Brians MP here:
https://gallery.technet.microsoft.com/MPAuthor-Stores-Sample-ef3752b2
/patrick
Please remember to click “Mark as Answer” on the post that helped you.
Patrick Seidl (System Center and Private Cloud)
Website: http://www.syliance.com
Blog: http://www.systemcenterrocks.com

Management packs to scom agent server ?

How SCOM agent will get Management Packs from Management server ? Will all Management Packs will get downloaded to all SCOM agent server?
Or how does Management server will come to know only required Management Packs
for agent server? (I heard Management Server will scan the registry to of agent server to understand the application and requirement , then it sent Management Packs
for agent server , is that correct ? )

On import, a complex and expensive series of operations occur.
The MP is written to a table.
The MP is loaded by the config service and all discovery targets are examined
A list of agents is created based on whether the agent manages a type instance that is a target of a discovery in each new MP. When this is found to be a match, the config service marks the agent config as stale in memory.
The agent periodically contacts the RMS (config service). In the response, a "you are stale" flag is included. THis causes the agent to ask for a resynchronization.
The agent gets a response with all of the state for every type instance being managed, as well as a list of mps and versions and indicators of whether the agents copy of these is stale.
The agent then requests any files it needs and receives them (this is expensive)
The agent then loads each MP, replacing any workflows that are necessary, and starts normal agent processing (discoveries run immediately - this is expensive).
Agent submits new discovery data. The config service responds with data indicating what the official state of each managed instance sent in the discovery is. (this is expensive)
Each time you create an override and save it, the above is repeated. (this is why it is slow to make online overrides)
Roger

Latest 2003 DHCP management pack for SCOM 2007 R2 ?

According to the links below the download of the Windows Server DHCP Management Pack includes monitoring of 2003 and 2008 DHCP but when running the .msi I only see references to a 2008 R2 MP.
http://pinpoint.microsoft.com/en-us/applications/windows-server-dhcp-management-pack-for-system-center-operations-12884902059
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=e5b48bef-4b21-4743-b562-580ec7984b24&displaylang=en
I'm looking for latest 2003 DHCP MP.
thanks

I think the version 6.0.6709.0 which can be get in Microsoft Download Center should be the latest version and it supports Windows Server 2003. You can
see the Release History “11/7/2008 - Updated release, version 6.0.6452.0, for DHCP 2000/2003/2008”, “6/28/2010 - Updated release, version 6.0.6709.0", with added support for DHCP 2008 R2”:
Windows Server DHCP Management Pack for System Center Operations Manager 2007
http://www.microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=e5b48bef-4b21-4743-b562-580ec7984b24
Thanks.
Nicholas Li - MSFT
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

SCVMM 2012R2 Management Pack for SCOM 2012R2?

Per the requirements of the SCVMM 2012R2 Dashboard Management Pack:
http://www.microsoft.com/en-us/download/details.aspx?id=43707
It requires the following files:
Microsoft System Center Virtual Machine Manager Library 3.2.7510.0
Microsoft System Center Virtual Machine Manager 2012 R2 Discovery 3.2.7510.0
Microsoft System Center Virtual Machine Manager 2012 R2 Monitoring 3.2.7510.0
However I am unable to find this management pack anywhere. Can someone point me in the right direction?

Ah, got it. I was confused by the vocabulary. Followed this document:
http://technet.microsoft.com/en-US/library/hh882396.aspx
thanks!

SCOM 2012 SP1 Update Rollup 5 - DB and DW SQL script and the Management Packs

Hi,
I am applying SCOM 2012 SP1 update rollup 5 from KB article : 2904680.
Step# 4 and 5 from the "Installation Information" sections says to run the SQL queries(UR_Datawarehouse.sql and Update_rollup_mom_db.sql) located at "%SystemDrive%\Program Files\System Center 2012 SP1\Operations
Manager\Server \SQL Script for Update Rollups\."
But I do not have "System Center 2012 SP1\Operations Manager\Server \SQL Script for Update Rollups\." folder location on my SCOM Management Servers. Similarly I do not have the MPs given in Step #6.
Can someone please let me know from where else can I get these SQL scripts and the MPs. What if I don't run these SQL scripts. Is that OK?

You will find it on below path%SystemDrive%\Program Files\System Center 2012\Operations Manager\Server \SQL Script for Update Rollups\.
inside system center 2012 folder> search to Server folder and inside it you will find SQL Script
Please remember, if you see a post that helped you please click (Vote As Helpful" and if it answered your question, please click (Mark As Answer).

Sealed and unsealed management pack in scom ?

Similar Messages

Maybe you are looking for