"Search Term" fields in SU01

Hi experts,
Issue concerns my CRM 6.0 back end system. Here, I have a requirement to pull out a list of all users created without any value in field "Search Term 1" under Adress tabI found an old thread from some years back which says this field is not part of any user tables as it fell under address management back then:
SU01 Search Terms
Does anyone have knowledge on how I can run this query? SUIM, change history etc has no option to do a user search on this field. I checked out most of the user tables (USR*) and none of them also have this field "Search term 1" in them.
Also for some users on the same system this field is not visible alltogether (No header in SU01 --> Address which shows "Search terms" at all).
I am a little confused. Any help would be great....
Edited by: Soumya-Thomas on Mar 3, 2011 9:56 AM

Hi Julius,
Just noticed your answer to my thread, this is what I did:
Table ADRP - got a list of all users (on field PERNR) with field value Search term1 (SORT1) against eahc user.
Table USR21 - mapped the above PERNR value to user name here.
Thus got a list of all usernames + Search Term1 (SORT1).
Also, i didnt really use authority checks against the field Search Term.. may be it is used soemwhere, but i didnt get into that; since my mission was only to make sure that a set of users (as per our policy) were all created with specific reasons entered in "SU01 --> Search Term1" during user creation. For me it was a user master data updation task.
Soumya

Similar Messages

Vendor Search Term Field

Hi filks,
I want to use second field of Search term in Vendor master General data, please provide me the field name.
Intable only one field is available that is SORTL, while I want the field name for second field.
Regards

Hi ,
please let me know how you achieved this functionality .
Thanks and regards,
Rajeshwar.

Search help for search term field in xk01

hi experts ,
i searched for the search help fild search term 1/2 in xk01(vendor master data ) in sdn i get note .
i followed note done the three steps sucessfully . now i tested xk01 transcation when i press f4 button on sort1 field its give a message no in put data available .

Sorry
perhaps I haven't understood:, you've written:
i searched for the search help fild search term 1/2 in xk01(vendor master data ) in sdn i get note .
i followed note done the three steps sucessfully
What do you mean? Which steps?
Max

Search Term in Search Help for SAP Users - su01

Hello ,
we want to use the search Term fields in the user data. (T-Code SU01)
As I read in the F1 help, these Fields should be available in the F4 Matchcode for Users?
But there is no field available? Any Ideas?
SAP ECC6.0
SP Stack 13
Regards
Tobias Werner

When you open the User data with t-code su01 , there are 2 fields named "Search Term 1/ 2".
huh?.... not really following you. when you open user data in SU01 you see well... the user data.
Regards
Juan

FI01 - Bank Master - Search Term 2 - Field Statu

Hi All
Can anybody tell me how the field status of Bank Master maintained? (I want to have "Search Term 2" field in the Bank Master. How can this be achieved)
Regards
Rajesh

Thanks for the response, Tao. But my question is not how to use Search Term 2, but how to use it as a matchcode.
For example, we have vendor Dr. John Smith / ABC Hospital. In the vendor master, we have entered 'Smith' in Search Term field 1, and 'ABC' in Search term field 2. Later on, users would like to run a report for this vendor, but they do not know the vendor number. So, they would do an 'F4' in the vendor field. The screen that comes up only show one Search Term field, and when they enter 'ABC' in that field, the system does not find a match. However, if they enter 'Smith' in the Search Term field, then the vendor will be found.
So, my question is how can we enable users to search for vendors by using values in Search Term 2 field.

Search term in fs00

Dear all
How i can add search term field in fs00
thanks

Hi
For adding the search term field, please follow the below steps:
Go to T.code OB_GLACC21
Select Layout SAP2 and copy it as Z one.
Select the Z layout and click on "Tab page titles"
Then Select the Tab Pages 1 and click on "Position of group on the tab pages"
Then click on new entries and add "Keywords" and save.
Now go to SPRO->FInancial Accounting->GL Accounting->GL Accounts->Master data->Preparations->Additional activities->Layouts for individual processing->Assign layout to Account group
Select the Chart of Accounts and Accounting group combination in which you want the search term to appear
And Attach the Z layout to it against "Chart of Accounts layout"
Regards

Vendor master data-sensitive field search term 1

Hi
Incase of Vendor master data ,i have defined search term 1 AS SENSITIVE FIELD.
When i change the master data i.e search term 1 sometimes it asks for change confirmation and sometime it doesnt.
Can you pls let me know why does this happen..that too for few vendors any logic.

resolved

Change Search Help for Payment Terms Field

Hi,
I would like to change the Search Help for Payment Terms Field, in Customer Master (KNVV-ZTERM). and in Sales Document. I believe it is the same.
Default is From Table T052 / T052U
ZTERM and TEXT1 Fields
I would like to have
From Table TVZBT
ZTERM and VTEXT
PayT Own Explanation Field.
Can we change the Search Help.

Hi,
The search help for the payment terms is not coming from the DDIC search help..
It is coded in the process on value-request event...
The function module FI_F4_ZTERM is called for this..you have to change this function module in case if you want the values from a different table..
OR do implicit enhancement in the subroutine FORM HELP_ZTERM in the include MF02DFH0 to call your search help instead of the function module FI_F4_ZTERM ..And do the same for the sales order also..
Thanks
Naren

FullText Searching using a search term from a field

Say I want to compare two tables using FullText searching, one table has the content to be searched, and the other table has a list of search terms (to be evaluated separately). I have not found a way other than using cursors to cycle through the search
terms to capture the results. The FullText search term appears to only allow 'text strings' or @variables, but not [Field]'s. Is there a better way to approach this for batch processing?
Another usage that I see merit for FullText searching is duplicates detection within existing data sets. Is there a way to perform INNER table joins using FullText - or do we have to fall back on CURSOR iterative methods again?
Thanks,
Jay :)
If you shake a kettle, does it boil faster?

Hi M.
Apologies for the delay in responding...
The links provided are for searching in multiple columns at once (a single search) or return ranked results (again single search). Is there a way to perform multiple searches at once, i.e. batch processing?
Thanks,
Jay
If you shake a kettle, does it boil faster?

Since Firefox updated yesterday, it won't respond to addresses in the url field or search terms in the search engine field. I can only go to addresses already in my bookmarks.

When I type an address into the url field the browser will not load the page...it just sits there as though waiting for me to press enter. Also it won't respond to the recently used addresses that show in the dropdown menu. It will also not respond when I try to use the search engine field (google). This started yesterday after Firefox automatically updated to version 3.5.9. I don't get an error message, just no response at all.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
This can also be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

CRM 5.0 - IC WebClient - BP Search Term 1 - Method

Hi Gurus
Does anyone know of a SAP Standard Method to retrieve Search Term 1 for the Business Partner (Customer). I want to display the value in the Identify Account View
Thanks
Panduranga

Here Are the steps which I did and tested the new QUERY in transcation GENIL_BOL_BROWSER, it is working fine. I am yet to change BSP level.
I followed the instructions in the IMG(CRM> CRM Cross applicationComponents>GenIL > Component Specific> Extend Object model for business partner) to extend the search.
To implement your own search, for example, new search parameters, or to filter the search results by your own criteria:
1. Create a new structure ZCRMST_HEADER_SEARCH_BUIL   as copy of CRMST_HEADER_SEARCH_BUIL and add the new fields to the new structure.
2. In Object Definition, define a name(ZBuilHeaderSearch) for the new search query and assign the new structure(ZCRMST_HEADER_SEARCH_BUIL) name to the new object, also enter ROOT object "BuilHeader".
3. Create a class ZCL_BUIL_HEADER as subclass of CL_BUIL_HEADER.
4. in IMG again assign this class to the external object name.
5. Implement GET_RESULT_TABLE method in ZCL_BUIL_HEADER class with the following extra code apart from existing code in the super class.
Data:   lv_sort1 type bu_sort1,
          lv_sort2 type bu_sort2.
lv_sort1 = ls_header_search-search1.
lv_sort2 = ls_header_search-search2.
pass above two parameters to 'TREX_BUPA_SEARCH' Function module which is present in the GET_RESULE_TABLE method.
6. Test your query in the GENIL_BOL_BROWSER.
I am getting correct result.
regards,
Laxman

BAPI to create bp with name, search term, address and Authorization Group

Hi
which BAPI could be used to create Business Partner (type organazation) with names, search term, address and the Authorization Group field.
ths

Hello ,
You can use : BAPI_BUPA_CREATE_FROM_DATA
In case you need to update additional fragments just search in trn code SE37 for BAPI_BUPA_*CREATE.
For example BAPI_BUPA_FRG0040_CREATE - Create classification data for BP , etc'.
Additional you can use XIF :CRMXIF_PARTNER_SAVE to create business partners
Rika

Website search term code

I have a website with a search field that uses some basic sql
to search the
web database.
For marketing purposes and to understand our customer better,
we want to
learn what our customers are searching for on our website.
Whats the best way do you think to achieve this?
I could write each and every search term into a database?
(cumbersome and
database table would grow out of control)
OR
I could put the search term and pass it as a url variable in
the url
string. Then i could view google analytics and view the more
popular url
strings. eg: www.xxxx.com/search.cfm?search=hard hats (bit
clunky)
Can anyone suggest a better way of doing this?

why not use a database?
handling huge amounts of data is what they're for , right?
you could keep it cleaner by going relational - just a
thought
when somebody enters a search, check the 'search terms'
table... if it
does not already exist, insert it.
then, add a record to the 'searches run' table, with the ID
of the term
and the date, whatever other info you want.
a simple query can pull all terms and a count of searches run
for that
term's ID, or a list of dates, whatever... i think that's how
I'd
approach it, if nothing better turns up...
Michael Evangelista, Evangelista Design
Web : www.mredesign.com Blog : www.miuaiga.com
Developer Newsgroups: news://forums.mredesign.com

Information in the notification address "Search Term 1/2".

Hi Experts
In my company we populate information in the notification address "Search Term 1/2". We can use this information to filter upon execution of reports IW28/9. However this information does not appear on any of the report output. Does anyone have an idea how this fields can be included on the report outputs?

Hi,
Modify your layout
select coloumns like Address no.,postal code,region,location,street etc in your layout. prior to that you must maintain this information in customer master.
kapil
Edited by: Kapildev Farakte on Nov 2, 2009 12:51 PM

Modify Vendor Search Term # 2 While Saving.

Hi Experts,
I'm trying to modify and save trought a BADI VENDOR_ADD_DATA -> SAVE_DATA the search term #2. i've typed the following code to try it, but it does´nt make any change, please help me :
DATA: sort1(30),
          sort2(30),
          zsendvalue TYPE addr1_data-sort1,
          zreturnedvalue TYPE addr1_data-sort2.
FIELD-SYMBOLS: = zpatrono.

use user exit - SAPMF02K

"Search Term" fields in SU01

Similar Messages

Maybe you are looking for