Search Webserver and only follow one specific hop

Hello,
we want to crawl our external website with sharepoint 2010 search. the files that are linked on the website are stored on another server.
in order to crawl these files i have to set the content source to do one server hop. by doing this the content source will also include content from other servers - but i only want to have the content from a specific one.
can you help me archiving this?
Thanks
Marco

Hi Marco,
It is by design that other servers will be included with one server hop in the content source.
If you can ping the server where the files exist from SharePoint server and you only want to crawl the files, then I recommend to use file shares as the content source type and give the URL of the folder where the files stored. (remember to grant permission
to the crawl account on the folder)
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Similar Messages

I want to upload one and only that one specific file

Hi everybody,
this may sound like a silly question, but I got a problem which is driving me mad I can't figure out a way to solve it.
So here it comes.. :-)
Every time I upload files within my DW file manager it not only uploads that specific file but also all the others files. For example I change one html file, upload it and when its done it also loads all the embeded mp3s and videos and css and all that crap which takes hours.
I'm sure there is a way to tell DW to only upload the file I want to upload, but I can't find it in the setup.
By the way, I'm using DW CS4.
Thanks for your help!
Cheers!

I don't have CS4, but if you look in the Preferences in the Site section it may have something there to adjust in that regard (Edit -> Preferences -> Site). In CS3 it provides for allowing one to select whether they want to be prompted to upload dependent files. In CS3, deselecting these options is supposed to not transfer any dependent files (mine is unchecked, but still prompts). It may be different in CS4, but in that section there is a Help button that leads to explanations of the settings.
The wondering I have is whether you are getting a prompt or not regarding uploading dependent files when you try to upload the file. If so, then that would be where you indicate not to do so.

ITunes 9.0.1 will only play one specific playlist

itunes 9.0.1 will only play one specific playlist, and freezes when I try to do anything else. Had 9.0.0.7, then upgraded...said would fix the problem, but didn't. When I sync iPhone itunes freezes as well. Tried to delete podcasts...froze. Tried to delete duplicate songs...froze. Tried to...you get the picture.
Any help?

Problem has been resolved...had to reinstall, then go to add/remove programs and repair iTunes.

I paid for Export PDF and only got one download

I just purchased Export PDf and only go one download. How to I get access to the unlimited version I just paid $19.99 for?

Hi,
We are sorry for inconvenience , we are aware about this issue and engineers are currently working to get this fix as soon as possible.
ExportPDF service would be up and running soon and you would be able to use your service you paid for. Thanks for your cooperation
~Pranav

I signed up for 20 bucks a month to use photoshop and only got one day of use. Where does that get

I signed up for 20 bucks a month and only got one day of use of Photoshop. Where does that get off?

What error are you receiving? Do you have a subscription to Photoshop CS6?

How do I ask photoshop elements to search for and only add pictures on my computer?

How do I ask photoshop elements to search for and only add pictures on my computer?

vbond0071 a écrit:
Please tell me its a simple fix???
[email protected]
My suggestion:
Read the help file carefully:
http://helpx.adobe.com/elements-organizer/using/workspaces.html
Now have a look at the the organizer display layout. Just over the main display panel where thumbnails are shown, there is a drop-down menu to choose the sort order. I assume you are on a recent version of Elements? If you are on PSE12 or 13 you can choose the chronological order (ascending or descending), the filename order, or the import batch. Additionally, if you are viewing an album you can have a manual custom sort.
My other advice is that before you use the organizer, you take the time to read this help file carefully:
Elements Organizer Help | Creating and editing catalogs
The organizer is a very power tool if you understand what it can do and if you don't have misconceptions about how it works. It's a powerful toolset based on catalogs. It can handle and manage folders and files, but that's not its main purpose. Its ability to manage the information included in the exif metadata of your files and the important information you enter with categories, keywords, captions, notes, ratings or the way you include pictures in albums, creations, stacks or version sets is very powerful.

Recording stereo audio and only getting one side - what gives?

Recording audio in stereo mode in logic and only getting one side showing on the meter and same side showing on the audio file - I've checked the interface - is there a logic setting I'm missing?

Is Universal Track Mode enabled?

My iPhone 5 only charges with my lightning port cable and only on one side. I've tried buying a new cable but that doesn't work.

My iPhone 5 only charges with my lightning port cable and only on one side. I've tried buying a new cable but that doesn't work.

Since there's no one side on a lightning cable, make an appointment with genius bar for an evaluation.

How to only synchronize one specific LDAP user group with SAP?

Hi,
Hopefully this is the correct forum to post this in. I want to have continuous one-way synchronization of users from my LDAP server to my SAP central system. I've started configure in SAP using transaction SM59 and LDAP. Can I somewhere set that only one specific LDAP user group shall be transferred to SAP (they do not need to be assigned to any specific group, profile, role in SAP) - or should this be done on the LDAP server side (or is it at all possible)?
Correct me if I'm wrong, but the User Group field in the report RSLDAPSYNC_USER only concerns SAP user groups right? This would therefore not be sufficient since I want to select the users to synchronize based on user groups in the directory.
Thanks, Oscar

We've used a repository constant to specify the LDAP filter for reading users / groups from the LDAP target.
E.g. LDAP_FILTER_USERS (&(objectCategory=person)(objectClass=user))
Then we also have a constant for the LDAP_STARTING_POINT
For our AD Group Initial Load we filter according to these settings:
LDAP_FILTER_GROUPS = (objectclass=group)
LDAP_STARTING_POINT_GROUPS = ou=IDMManagedGroups,ou=Groups,dc=cfstest,dc=le,dc=ac,dc=uk
The above example only reads AD groups starting at the specified OU
Then in a Job From LDAP Pass the LDAP URL looks like this:
LDAP://%$rep.LDAP_HOST%:%$rep.LDAP_PORT%/%$rep.LDAP_STARTING_POINT_GROUPS%?*?SUB?%$rep.LDAP_FILTER_GROUPS%
I hope this helps
Paul

Why does using Google in the search bar (and only Google) not let me open search results in the same tab?

Hello,
When I use Google in the search bar, I have to open the search results in a new tab. If I simply click on them to open in the current tab, I'm inevitably redirected right back to the main Google site. This has only started happening in the past month or two -- I'm considering switching to Chrome after 5 years with Firefox because of this. Please help! It's incredibly frustrating to consistently have to remind myself to open all search results in a new tab. It's quite a waste of time over the course of a day.
Here are the basic steps:
1) I do a search using Google in the search bar.
2) As is supposed to happen, the search returns results in the current tab.
3) When I click on a result link, I'm immediately sent back to www.google.com.
4) If I hit back to try to return to the search results, I'm taken to the page that was loaded BEFORE I even did the search.
5) If, and only if, I instead right-click or Mouse3 click on the search results and open them in a new tab, I can successfully go to the search result pages.
--Thank you

Try to clear the Google cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Is it possible to select a part of a video project and only render that specific part?

Hi.
I formerly used Sony Vegas Pro - and I'm in the process of getting into Final Cut Pro X, and I'm wondering...
In Sony Vegas Pro - I was able to mark a part of my video project, and only render that. It was usefull if I wanted to send a part of a project rendered to someone else for review etc.
In Final Cut Pro X I can't find a similar possibility - I have to render my complete video project - or nothing at all.
Does anyone know if it's possible to select a part of a project and render only that part?
Best regards
Jens Rosenstand

Hi.
Well...that's not quite what I meant...
I would like to render a part of a video to a .MOV file for example - that I can send of to someone to watch - but the whole project, just a part of it.
Is that possible?
Br.
Jens

Why doesn't the map search locations and only drops pins?

I started a project in iPhoto and used the map to show various locations. It was easy to insert the locations as the map searched them for you. Now I only appear to be able to drop pins and label them. This is going to be very time consuming if I have to precisely search each location manually... Any suggestions?

How do you set the location of a phot if it has nort recorded the GPS co-ords ?
I cannot see a way to drop a pin !... Tx
This discussion is about photos on the map pages in a photo book. You can drop pins on the map of a book to mark a place, but that does not assign a location to a photo.
While viewing a map in a book, ctrl-click a place on the map and select "Drop Pin".
Adding location data to photos is not supported in Photos. I hope, the next update will add this necessary feature.
Send feedback with a feature request: Apple - Photos - Feedback
For the time being, you have to add GPS coordinates to the photos before importing them to Photos.
You could, for example, first import to iPhoto, add the locations, batch change the titles and captions, do all the things that are not yet supported in the new Photos, then export the photos from iPhoto and import them to Photos.
Or use the free exiftool, if you like the Terminal.
See: http://www.sno.phy.queensu.ca/~phil/exiftool/exiftool_pod.html#geotagging_exampl es
To install exiftool: http://www.sno.phy.queensu.ca/%7Ephil/exiftool/install.html
Other convenient apps are Jetphoto Studio, Geotagalog, houdahGeo, there are many more ..
I use Jetphoto Studio, but it is not free.
If you updated iPhpto to version 9.6.1 before the update, you can still use iPhoto.
Just drag it back to the Dock from the Applications folder.
If you not yet have 9.6.1, update as described here:
Get iPhoto 9.6.1 if you didn't update before OS... | Apple Support Communities
The main idea is to move the iPhoto app to the Trash, so Spotlight does not see it as installed, reload the AppStore, and then to try to download again from the App Store - from your Purchases tab, not from the main page, since you can neither buy iPhoto nor update it, but you can reinstall, if your AppleID is associated with it.

Windows media Player suddenly can't read some of my MP3, and only with one user account !!!

Hi!
here is my problem:
I have a lot of MP3 in my W7 personnal computer at home. I read MP3 everyday with WMP and all was working fine, until some days ago. Some of my MP3 can't be read by WMP. I've looked at their properties, but there is nothing wrong, compared to others
MP3 that I can read.
The "unreadable" files are correctly read by VLC. So they are not corrupted.
When I swtich to an other user, the same MP3 are read correctly with WMP. (Both usersd are admins)
My MP3 are présents on two computers at home. When I connect from my second computer with a
\\computername\c$, I can read these files. So the files are definitivly OK. But when I connect from my first computer to the second one, I can't read the MPS that have the same name! it's absolutely strange!
I've tried to uninstall WMP, to delete all files related to WMP in my Appdata folder, I have even tried the FixIt from Microsoft, but any of these steps were helpful.
I've copied the "unreadable" files from the Music folder to my desktop, allways the same issue.
I've disabled my Antivirus, but without any results. I've tried the system restore, idem.
My computer is running W7 32 bits, SP1, all updates installed regularly.
Please help me, I want to understand what has happened!!! :)

Hi Yolanda,
the error message is inside a popup: (French trnaslation) "Windows media Player encountered an error and will close." I have the choice beetween "CLOSE" and "HELP ON THE WEB".
Of course the "help" is totally useless....
I don't see any troublshooter related to "media player". The only troubleshooter where I can choose Media player is for the "compatibility mode", so it's not helpful. On the "audio and devices" troubleshooter I see "read
a DVD with Windows Media Player", but that's not my case.
I've already done the last step. I copy the MP3 from my second computer to the "problematic" one, and I can't read my file. But, on the second computer, i can read this MP3 so the issue is ONLY when I try to read this file with my Windows session.
(in the same computer, with the administrator session, I can read all the files).
To put it in a nutshell:
on computer A logged as CEDRIC i can not read the mp3 called SUPERSONG (it's an example lol)
on computer A logged as administrator, I can read the SUPERSONG
on computer B logged as CEDRIC (other local account but same name) I can read the SUPERSONG mp3 that is present in the music Library (that is not the same file, but it's a file with the same name, and of crouse this is the same song). (all my MP3 are copied
from computer A to computer B in case of failure on one of the computers)
on computer A logged as CEDRIC, if I do a
\\computerB\c$\...\SUPERSONG I can not read it.
I know this is complicated to explain, but if I ask to the Microsoft community that is because I don't know what to do ;) ;) ;)

The banner in the iTunes store advertised the godfather TRILOGY for 9.99. I purchased and only got one movie. WHAT GIVES?? Why advertise a deal on the trilogy, then not deliver?

WHY IS THE ITUNES STORE ADVERTISING THE GODFATHER TRILOGY, AND UPON PURCHASE I GOT ONE MOVIE? WHAT GIVES??

The same thing happened to me. I purchased the Trilogy but it only downloaded the first movie.
Also i looked at my accounts "purchased items list" and it didn't show that i purchased anything.
When i went back to the store to look at the trilogy order page, it didn't say that i purchased it.
It just had the "buy" button.
I will wait a few days to see if i get an email from the iTunes store to see if Apple finds out that
they made a mistake. If i don't get an email, i will have to email iTunes support to see if it can
get this problem fixed.

Why after the update is my version still indicating 3.7.2 and only the one computer is even getting the update?

I have 10.9.5 on an iMac 27 and a macbook pro 17 both having ARD Admin 3.7.2 but only the iMac showed the 3.8.2 update available. I downloaded that one before everything and it allowed me to update clients to 3.8.2 but after discovering that my Macbook didn't get the update offer, I looked at my version on the iMac and it still shows 3.7.2 yet when I select targets to upgrade client software it offers the option to upgrade them to 3.8.2 from my version indicating 3.7.2?

Try to restart your computer, then restart your phone and try again. Let me know the results.
Regards,
-C

Search Webserver and only follow one specific hop

Similar Messages

Maybe you are looking for