Searches doesnt work in Shopping Cart

HI everybody,
If i try to do a search in my shopping cart (search for a cc, gl account, assets, etc. it doesnt search anything.   The page is refreshed but I dont see anything more.
Should I activate something in order to have the searches working ?
Thank for your help folks !
REgards from mexico,
Diego

Hi Diego,
That is either a templte problem, or an authorization issue.
1- Republish the BBPHELP (or BBPSEARCHHELP I don't remember) service. And retry
2- Give SAP_ALL profil to the user and retry.
Then you should know where the problem comes from.
Regards.
Vadim

Similar Messages

  • Cost Centre drop down not working in Shopping Cart

    Hi Experts,
    Cost Centre drop down is not working in Shopping Cart.
    Version: SRM 7.0 SP05
    Message - no input help due to errors when checking the display authoriz.
    I have checked there are some SAP Notes available for this issue, but it is for SRM 5.0 version
    725247 - Search help and BAdI BBP_F4_READ_ON_ENTRY in accnt assgn scr
    839534 - Problems with dropdown list in Acc. ***. overview
    925890 - Cost centre drop down not working
    I have raised OSS Message, Please gothrough the reply from SAP below
    Note
    656633
    815849 top 5
    Customizing Recommendations
    - Note 656633 desribes pre-requisites for ERP RFC-user using F4-help.
    - Assign SRM standard role /SAPSRM/EMPLOYEE during F4-help testing.
    - Check RFC-dialog for F4-help destination using SM59.
    - ERP F4-help destination must be maintained in IMG table bbp_backend_dest.
    - Using PPOMA_BBP dropdown disable BE_F4_HELP authority activity as of note 815849. Multiple values must be maintained in  attribute CNT cost center.
    - Hint: Mix of ERP F4-help and PPOMA_BBP dropdown is not possible.
    Return
    a.SRM system ID, client, remote access, logon data buyer who face the problem incl. sap_all
    b.ERP RFC-dialog access via SRM, RFC-user incl. display or sap_all
    I have followed both the notes, but still problem presists
    Please advice.
    BR,
    Siva

    Hi,
    This issue has been resloved.
    Solution:
    Step:1
    Assign SRM standard or custom role like /SAPSRM/EMPLOYEE to user; Please make sure multiple values been maintained in attribute CNT cost center in PPOMA_BBP for the user
    Step: 2
    Disable BE_F4_HELP authority activity for role /SAPSRM/EMPLOYEE in BBP Component > SRM: General Access Authorizations in EBP
    Step: 3
    Apply SAP Note 668746 - COIN - Switching off OKB9 in EBP scenario in SAP R/3 as per note 815849 Solution 1
    System will check during the processing of account assignment objects in an EBP scenario, the backend system reads the default account assignment (Transaction OKB9) as usual if EBP does not provide any account assignment. This note will Switch off OKB9 in EBP scenario and it will list the CNT values from PPOMA in the shopping cart account assignment F4 help.
    BR,
    Siva

  • Search doesnt work

    Iphone search doesnt work

    I have done a search on the forum and found a large discussion thread on the issue of Spotlight not working. It appears to be a bug in the iOS 5. (although personally I'm not experiencing it). The workaround seems to be to disable e-mail from the search in Settings>General>Spotlight Search>Mail> deselect.  It may well be that the bug will be fixed in the next update but of course I can't guarantee that.  This is the link to the thread if you want to see what others are saying about the issue https://discussions.apple.com/thread/3404037?start=30&tstart=0

  • Home page search doesnt work

    the search button doesnt work i have reset the fire fox and i have disabled all add ons and i dont know how to config so help please

    Do the other two searches work: address bar (URL bar) and search bar (the one with the drop-down list to choose your search engine), or are those also broken?

  • PO split is not working from Shopping cart

    Hi Friends,
                     I am using SRM 7.0 service pack : 9.0 . Extended classic scenario .
    I createad shopping cart with two line items as given below.
    1st line :    supplier1     
    2 nd line : supplier2 .
    My requirement is: SC has to split into two POs. Can you suggest any BADI or SPRO setting related to this.
    Thanks.
    Balaji.T.

    Hi Muthu,
                  Thanks for your response. I did not specify in details.
    In details, here is below :
    line item , Purchase group and supplier, Geneated PO
    1st line : pgp_100     supplier1    - PO1
    2 nd line : pgp_200   supplier2 . -  PO2
    3 nd line : pgp_200   supplier2 .  -PO2
    4 th line : pgp_100    supplier2 . -PO3
    Currently SRM is generating as given above. But our requirement is : we need to get two POs , one is with supplier1 and 2nd PO with supplier2.
    Let me know your idea Please.
    Any configuration can be done.
    Thanks,
    Balaji.T.

  • Why is my ipad and itunes working for everything on the stores, but the search doesnt work on them? Any ideas what i can do to help it?

    My ipad and iphone wont search for anything on the app store or itunes store, after a minute of loading it says 'server has timed out' in the blue box. But the weird thing is all the other features on the stores work, and do not crash. How could i fix this?

    try this
    I seperated each step and changed it abit for ya that i found that maybe useful for you bc it sounds like the same "Wireless Weirdness" that this person had the same problem.
    https://discussions.apple.com/message/18798125#18798125
    1. Restart the computer and wait to see if the network is discovered before entering it manually.
    2. Power off on the modem and router and restarted computer
    3. If no network selected, do the diagnostics
    4. Enter the SSID & PSWD
    5. If asked for DHCP or PPo, chose DHCP
    6. If asked for cable, say no bc u use wireless
    after that, it should work for ya

  • SRM: Shopping Cart Date Issues

    The date range on the monitor shopping carts reports is not followed. A report used for analysis on shopping carts is not working. When you select various dates it seems to ignore the requests you have entered and gives you the list from the year dot.
    Any ideas anyone?

    Hi
    Which SRM version are you using ? Which Report you are referring here ?
    <b>Please try the following SAP OSS Notes, which will help.</b>
    <u>Note 889942 BBP_MON_SC: Service item can't be searched by perform.period
    949399 SC monitor: Search help does not display all catalogs
    972697 bbp_mon_sc: No result for limit shopping cart search
    901608 BBP_MON_SC: Service Item search is incorrect
    813434 Shopping cart monitor and internal ITS:Shopping cart display
    669720 BBP_MON_SC: Follow-on document is not found
    625694 Not possible to search for SHB based on some docs in monitor
    596089 SHP Monitor: problems with search functionalities
    Note 561186 Monitor shopping cart: Selection of large datasets</u>
    Do let me know.
    Regards
    - Atul

  • Created by in Monitor shopping cart requires employee numer since SRM 5.0

    Hello experts,
    We have upgraded from SRM 4.0 to SRM 5.0 SRM SRM server 550. In monitor shopping cart using 'created by' to search shopping carts, users could usually enter their username. After the upgrade however users need to enter their empoyee number. So they first use the search functionality (binoculars) to search for their name afterwihich the field will be filled with their employee number. Does anybody know how to change that ? So users will be able to enter their username again to search for their own shopping carts ?
    Thanks as ever!
    Kind regards,
    Antoinette
    Edited by: Antoinette Stork on Nov 14, 2008 5:45 PM

    Problem solved

  • Grouping of Shopping Carts using the report  BBP_SC_TRANSFER_GROUPED

    Hi Experts,
    I am a new SRM consultant and have been asked to investigate an issue regarding grouping of Shopping Carts using the report  BBP_SC_TRANSFER_GROUPED.
    The wanted scenario:
    For one specific vendor we wish to pool/group request coming from various shopping carts into one PO e.g. once a day. The shopping carts for that vendor can be destinguished by one specific product category.
    We are on classic scenario hence the PO will be created in our ECC system.                                                                               
    Settings we have done to accomplish what we want:
    1. We have set up the transfer for grouping on the specific product category in the sourcing area in the IMG structure
    2. We have run the report BBP_SC_TRANSFER_GROUPED (grouping takes place according to the product category)
    This approach works, the shopping carts gets grouped into one PO in ECC. however the line items from the Shopping Carts are mixed in the PO eg SC1: Item A, Item B, Item C, Item D SC2: Item 1, Item 2, Item 3, Item 4 PO (Current result) Item A, Item 1, Item B, Item 2, Item C, Item 3, Item D, Item 4.
    This seems quite strange, as there are no logic reason for this split. It would be understandable if it was a matter of delivery dates of the goods, but they are not in any order i.e. first coming delivery date first.
    Does anyone know how to correct this or can anyone clarify why this sequence mix happens?
    For me it seems like a program errror.
    Hope you can help me solve this issues
    Cheers Christian
    Edited by: Christian Gjellerup on Aug 6, 2010 3:34 PM
    Edited by: Christian Gjellerup on Aug 6, 2010 3:35 PM

    Hi,
    In SRM -Product categories = Purchasing group in SAP R/3.
    During the transfer of P.R   from R/3 you have enter the Purchasing group in R/3.
    In SRM in the PPOMA_BBP in the extended attribute you can enter the exact product categories
    or else enter * in the product categoies and the backend logical system
    in SPRO --define objects in backend system --- in this enter the purchasing group and category Id
    check your default settings in the SRM web browser
    Regards
    G.Ganesh Kumar

  • Cost centre Budget Display in the shopping Cart ( back-end settings)

    Hi,
    I am working on Shopping cart budget (Back-end).
    I have maintained the budget for Internal order in the back-end, and while creating shopping cart for the Internal order able to get budget display as below
    Budget Overview Assigned to Budget of Value Budget Assigned Credit Limit Used Action
    Order R3xxxxx Order R3xxxxx 100.00 GBP 2,500.00 1,600.00 !!!!!!!!!!!!!!!!
    But my requirement is to maintain the budget for cost centre, I am going to create shopping cart with cost centre, I have carried out following steps but still not able to get budget display which i have maintained for cost centre.
    1) Cost centre created
    2) Budget maintained for this cost centre (KPZ3)
    3) Created statical order:
    a) Control data Tab: Statical order, Revenue Posting and Commitment update (all the check box licked)
    b) Assignments Tab: Responsible CCtr is assigned to this order
    3) As per the Note 68366 i have tried to maintain substitution in CO (transaction OKC9), but confusing about what to maintain and where
    Can you please suggest how and what to configure in OKC9, or any material or note which explains detail steps
    I am confusing about below fields
    1) Event
    2) Active
    When going inside after double click
    Under Cost accounting where i have maintain substitution, under line item or Order and process for pre-requisite and substitutions
    Regards,
    Jai

    Hi Jai,
    Could you please share how did you achieve this functionality?
    We are trying to implement similar functionality.
    Thank you
    Ritesh

  • Vendor Selection in Shopping Cart

    Hi
    We are having nearly 20 company codes with in SAP and 5 company codes are using EBP.
    At the moment, all vendors designated for EBP are available when creating a shopping cart.
    Problem: User doesn't knows by looking at the vendor whether that vendor has been extended to their company code or not.
    What we need: We are looking something like where we can search the vendor for a company code etc., in the vendor search while creating the shopping cart.
    Is this something possible?
    I am on the business side of the EBP not a techy of EBP.
    --erpMAN-

    How did you solve this issue.  I have the same requirement from my business.  They want to narrow down the vendor search help by company code.  The purchasing organization option will not help as we only have 1 purchasing organization set up for the entire organization even though we have hundreds of company codes.
    Thanks,
    Jeff

  • Error in shopping cart approval

    Hello all, I am working in SRM 7.0. I am working with shopping cart with one approve level only
    The approver must be the requisitioner's manager always, but when I go to change shopping cart approve squema I have an error message.
    I configured it:
    In process levels for object type BUS2121
    Process schema evaluation: 1EV_SC_001
    Process level schema: 1C_SAPSRM_MIG_101 and 3C_SC_700_002
    For 1C_SAPSRM_MIG_101:
    Process level configuration:
    Level Type: Approval
    Responsible Resolver Name: RR_MANAGER
    Task ID: 40007954
    Decision Type: 2
    When I save a shopping cart I have this error message:
    No approver found RR_MANAGER BUS2121 4CFCDAE5BAC10B80E10080000A8C6250
    In the organizational structure I am in the same organization unit of manager and I have only one manager in all structure. How can I determine the manager in this case? Which can be the error?
    Thanks in advance
    Rosa Rodríguez

    Hello, in SLG1 I can´t see errors, I only see this:
    @5BQInformation@     10 Execute event 1EV_SC_001 Evento para BO SC. 09.12.2010 12:11:36
    @5BQInformation@     42 Execute expression 1V_SC_SCHEME Determinação do esquema dinâmica para SC; result 1C_SAPSRM_MIG_101
    @5BQInformation@     52 Execute expression 0V_SC_EVENT Evento do objeto; result SAVED
    @5BQInformation@     63 Execute expression 0C_C1_C_FWFSCRLCNTNT Classe: /SAPSRM/CL_WF_RULE_CONTXT_SC; result /SAPSRM/CL_WF_RULE_CONTXT_SC
    @5BQInformation@     63 Execute expression 0C_C2_C_EVENT Método - evento do objeto; result GET_WF_EVENT
    I am using 1EV_SC_001 evalution ID not 0EV000.
    For evaluation ID 1EV_SC_001 I used 1C_SAPSRM_MIG_101 process level schema and RR_MANAGER as Resp. Responsable Name.
    Can I used 0EV000 evaluation ID? What is the process level schema that I have to used?
    Thanks in advance
    Rosa Rodríguez

  • Add Shopping Cart field on POWL screen of Confirmation Tab

    We have a requirement to search confirmations by a shopping cart number.  To achieve this we need to add shopping cart field on confirmation tab (POWL).  Any ideas?  Thanks.

    Hi Veda,
    To add the field to search criterion add it to the DB Criterion of respective feeder.
    To add the field to result table add the field in field catalog of respective feeder.
    Also have a look at the enhcnement spot /SAPSRM/BD_CLL_POWL_FEEDER. Here you can find BADIs to add fields in search criterion and result table and also to modify the result according to your new field.
    /SAPSRM/BD_POWL_CHNG_SELCRIT
    /SAPSRM/BD_POWL_CHNG_FIELDCAT
    /SAPSRM/BD_POWL_CHNG_SEL_RSLT
    Thank you,
    Anubhav

  • Approval of Shopping cart with limit items

    Hi All,
    We are using n-step item level approval (BADI) for shopping cart approval.
    The approval process is working fine but when i create a shopping cart with limit items, the shopping cart goes withous approval.
    The approval process is also working fine if i am including 1 limit item and one normal item.
    Please let me know why is approval process not working for shopping carts with only limit items.
    Regards,
    Gaurav

    Hello,
    approving a shopping card without any workflow
    is impossible in the Standard SRM case.
    As there is no workflowlog anymore , it was deleted somehow. Please
    ceck if you got processes where the workflow will be archived or deleted
    after a while.
    The question in my point of view is, why was there a workflow
    without any approval steps ?
    As i can see you are using only the workflow ws14500015 which
    is a badi workflow. So the behaviour is controlled from your
    badi,as all approvers come from the BADI.
    If there is a automatic approving then the BADI brings not back
    any approver and the setrelease method of the workflow is triggered
    then immetiately to set the status to "released" = "approved".
    To Do:
    Check your BADI for Shopping Cards like the example one mentioned above.
    Make sure that the workflow logs persist in the system for analysing
    the processes and to get the correct approval preview.
    regards,
    Gaurav

  • BBP_MON_SC : does not show the details of the Shopping cart

    Hi,
    We are in SRM4.0 and Stack 11.
    when we use the transaction:BBP_MON_SC to check the Shopping cart and get into the details, the system does not show the "details of the shopping cart".
    The sequence of the steps :
    1) click on the "monitor shopping cart"(BBP_MON_SC) in our web browser
    and search the SC by date.
    2) The list of the SC created on the specific date come up.
    3) when we select a SC to get into the details the system shows
    a "BLANK SCREEN".
    Thanks in advance.
    Regards,
    RK.

    Hi,
    First check whether you have implementedany custom BADI at the SC item level.If the BADi is wrongly implemented then you may not be able to see the item details.
    Also Make sure that BASIS Team has assigned correct roles and profiles to the administrator user. Ask BASIS to use SAP provided roles and then you can try out again. (Try this role - SAP_EC_BBP_ADMINISTRATOR / SAP_BBP_STAL_ADMINISTRATOR )
    Here are the related links ->
    http://help.sap.com/saphelp_srm50/helpdata/en/a0/10213862f7bd47e10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/9f/a47c3c989d501fe10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/15/46d19e4069d14e92decb87d6a56b9c/frameset.htm
    Incase it does not help, then, Without assigning any other roles, try logging to the transaction - BBP_MON_SC via SAP GUI instead of webpage and then do once you get some authorization issue /error, using SU53 Transaction, you can get the required Authorization objects need to attached to the user profile.
    Alternatively, For time being, Try assigning SAP_ALL and SAP_NEW to the Administrator Buyer user role of that user.
    Also have a look at these notes:
    Note 636270 Shopping cart monitor: Display of SC if user is deleted
    Note 764135 Shopping cart monitor: Selection according to 'Created by'
    Note 865179 BBP_MON_SC: Search for shopping carts shows wrong results
    Note 683524 Shopping cart monitor does not display all shopping carts
    Note 1045386 BBP_MON_SC: No DELETED Event after deletion
    Note 829529 BBP_MON_SC: Displaying shopping cart of a locked user
    901427 BBP_MON_SC: Requester instead of creator in overview list
    859012 BBP_MON_SC: Deleted shopping carts are not found
    882884 BBP_MON_SC: Deleting items in the status I1116
    792542 Shopping cart monitor: incor. return URL from shopping cart
    672764 Shopping cart monitor: Display of deleted shopping carts
    Note 522620 Shopping cart monitor: Customer enhancement / BADI
    Note 889942 BBP_MON_SC: Service item can't be searched by perform.period
    949399 SC monitor: Search help does not display all catalogs
    972697 bbp_mon_sc: No result for limit shopping cart search
    901608 BBP_MON_SC: Service Item search is incorrect
    813434 Shopping cart monitor and internal ITS:Shopping cart display
    669720 BBP_MON_SC: Follow-on document is not found
    625694 Not possible to search for SHB based on some docs in monitor
    596089 SHP Monitor: problems with search functionalities
    Note 561186 Monitor shopping cart: Selection of large datasets
    BR,
    Disha.
    Pls reward points for useful answers.

Maybe you are looking for