Security Deposit by Distributor - How to deduct TDS

HI SAP Gurus,
Could you please let me know the procedure that is followed in SAP for the below scenario
Actually the user need to give Interest on Security Deposit by Distributor - where in i need to deduct TDS.
The Distributer her is customer and he wants to know the exact process that is followed for this scenario.
Regards.
Edited by: Gabriel Borde on Sep 21, 2010 8:02 AM

Hi,
You can create the below:-
(1) Setup the interest calculation indicator for customa arrear
(2) Then post that interest calculated on the custom account itself (Customizing OBV1). (If the customer is assigned to the WHT code in customer master, system will deduct the WHT on interest to customer.)
Regards,
SDNer

Similar Messages

How to deduct tds on advance payment IN SAP

How to deduct tds on advance payment to vendors.

Hi Kishore,
You need to define the Extended Withholding Tax type based on payment. Assign WHT code to WHT type and complete the relevant configuration. Below link will help you to config WHT in SAP.
http://help.sap.com/saphelp_470/helpdata/en/e5/0781474acd11d182b90000e829fbfe/content.htm
Assign WHT type and code in vendor master data.
Standard SAP will start deducting WHT on downpayment.
Hope it helps.
Thanks,
Deepanshu

How to deduct TDS while making an Outgoing Payment

Company wants to deduct TDS while making an outgoing payments to Contractors / Jobworkers / Transporters.... can anyobody guide me
Edited by: Marc Riar on Feb 19, 2008 10:23 AM

Hi sanjay,
For deducting the with holding tax, First you have to define some withholding tax codes with the percentages of the amount.
For creating the with holding codes
go to
Administration>Setup>Financials>Tax>WithHolding Tax>
There a create tax code
Now Go to A/P Invoice. Select a vendor and change Itrem/service type to Service
Then give the details of g/l and make WTax Liable to yes. There you can set the with holding tax code that was created. Based on that you can see the Wtax amount in the footer of the form..
When you make the payment to particular vendor it automatically creates ledger entry for with holding tax also..
Regards,
Jagadeesh.V

Re: Security deposit against vendor is picking up the tds .

Dear Team,
I am encountering an issue regarding tax calculation ..At the time of periodic posting security deposit is deducting the tds which is incorrect. We are implementing real estate in 4.7.We had pulled the with holding tax through BADI. Please advice how should i restrict the badi for the security deposit.
Note: I had maintained all condition types separately for security deposit and as well normal rent. Please guide us. Thanks for the consideration.
Regards,
Suma.

Hi all,
Thanks for responses .I found a solution for this.
Regards,
Suma.

TDS on Customer Security Deposit

Hi All,
Actually I need help on TDS deducted on Customers. We have Registered Dealers.We take Security Deposit from the Dealers.We pay interest on Security Deposit. We want to configure the SAP functionality for Interest calculation on Security Deposit and TDS on it.
I have configured the system for Vendor TDS and it's working fine.When I go for the same on Customer SD interest TDS, it is not working properly. My concerns are as under :-
1) as in Customer Master,we do not have any field for "Receipint type" I am not able to use J1INCHLN as there is no "Customer field".
I tried J1INMIS to update remitance challan and bank challan.Problem is TDS certificate. In TDS certificate, I am not able to see BasicsurchargeE cess separately as surcharge and E cess tables are updated onlu with "Recepeint type" and we do not have that field in customer master. What could be the problem? How we can resolve it?
How we can configure the functionality where we can have both SD interest calculated and TDS also deducted properly?
Thanks in advance for your replies.

HI
If you set the posting indicator to "1", the withholding tax amount is deducted from the customer/vendor line item amount and/or bank line item, and a withholding tax line item automatically created.
After that pls make sure that the same Wtax code is assigned your customer master which is modified to 1 posting indicator and run again F.2B after all modifications
it has to work
Reg
Vishnu

Security Deposit Amount from customer should not be deducted

Hi,
client requirement is Security deposit from Dealer(Customer) should not show the balance of amount of Invoice of the Dealer, It should be shown seperately and not show the balance after deducting Security deposit. This security deposit is returnable to Dealer.
So, all the invoice raised to customer and credit memo should be shown different amount without deducting from Secutiy deposits.
For example If Rs. 1lakhs is security deposit
there r 3 invoice of debit against Customer say 60000. In customer line item it should not show the balance of Rs40000. It should show only 3invoice amount of Rs.60000 and it should show seperately Rs.1lakhs.
IS Thereany configuration of this scenerio.
Regards,
Sreekanth

Hello,
This is what expected to do.
That is the reason SAP has provided with two check boxes in FBL5N.
If you select only normal items you will be shown INR +60000
If you select both normal items and special GL items, you will be shown INR 40000- (-10000+60000)
If you select special GL items it will be shown -100000
There is nothing special you are required to do.
Regards,
Ravi

Security deposit deduction in the invoice

Dear All,
My client want to deduct the security deposit in the invoice and the deducted amount has to be shown as open iitem in the
vendor open items with special G/L indicator.
please guide me on this issue.
Thanks & Regards
KANNI CHOWDARY

Hi,
You can create a special GL indicator for that and can then make transfer posting from vendor normal balance to vendor special GL indicator using transaction F-51
Regards,
SDNer

How do I get my security deposit back

Hello! please help me
2011 Oct I bought iPhone 4S , at that time I paid $400 for security deposit ,because I.m a international student.
They told me you can get back the check after 1year, but I could not get that.
So I called 3 times customer center.
They said check was already issued 2012 Oct, but I didn't get it.
I explained my situation they told me we will call back later, we need to check another department etc.
after calling there's no feedback to me .
t's been already 3years.
How can I get back my money T_T

You get the deposit back after 1 year of on time payments, if one is missed that resets. Also if you did meet that the check is sent to the last on file address they had for you at the time.

How to Handle TDS deduction by Customer

Dear Experts,
Can you please help me that how should I handle the case in which customer deducts our TDS. Actually, at one of my client site they can not predict that their customer is going to deduct TDS or not. So please tell me how should I handle this. Actually on Incoming Payment I have asked them to do on account paymenmt so that they can deduct it at the time of payment but sales invoice is of full amount. So they can not reconcille it.
Please help me on this ASAP.
Thanks
Swapy

Hi Swapy.........
Please check this Thread......
Not able to do Reconcillation with BP.
Regards,
Rahul

How can Cash security deposit become "real" in billing?

Hi gurus,
I am searching for a solution that let cash security deposit become "real" after billing.
I use FI-CA event R401 in which I set field XGUMB_401 = 'X' on FI-CA document relative to cash security deposit. This item is statistic (DFKKOP-STAKZ = 'H').
After bill has been created, cash security deposity is displayed as follows in transaction FPSEC3: there is a trash can icon near FI-CA statistic document and a new fi-ca document appears in the list. This new document is the clearing document for first statistic document, but it is still statistic. (see attached image).
Furthermore, it is not possible to reverse bill because of this new statistic document that is also clearing document for the first.
I want this new document to be "real", not still statistic.
Can someone please tell me if there is another event or something I can modify by customizing that let me achieve my goal?

Hi gurus,
I am searching for a solution that let cash security deposit become "real" after billing.
I use FI-CA event R401 in which I set field XGUMB_401 = 'X' on FI-CA document relative to cash security deposit. This item is statistic (DFKKOP-STAKZ = 'H').
After bill has been created, cash security deposity is displayed as follows in transaction FPSEC3: there is a trash can icon near FI-CA statistic document and a new fi-ca document appears in the list. This new document is the clearing document for first statistic document, but it is still statistic. (see attached image).
Furthermore, it is not possible to reverse bill because of this new statistic document that is also clearing document for the first.
I want this new document to be "real", not still statistic.
Can someone please tell me if there is another event or something I can modify by customizing that let me achieve my goal?

How to refund the security deposit?

When I was setting up a new line I needed to pay $125 for the security deposit. The sales people told me it would be refunded after 6 months of use in form of credit in the billing cycle. But after 7 billing cycles, I still havent got any and still need to pay the bill out of my pocket. Is this done automatic or we have to fight for the refund,?! I am disappointed.

Just a friendly reminder, this is a forum where users help other users. It looks like your issue may require a Verizon representative to review your account details. Please visit our Support page for a variety of ways to contact Verizon, including “Ask Verizon,” our virtual chat agent, and customer support phone numbers.

How do I get my security deposit refund

I have been a customer for over 2 years by now when will I get my security deposit. I opted to pay a security deposit as I didn't want to have lowering my credit score with a "hard" inquiry. I am waiting to get it back still.

You get the deposit back after 1 year of on time payments, if one is missed that resets. Also if you did meet that the check is sent to the last on file address they had for you at the time.

Calculating Interest on Cash Security Deposit

Dear Expert,
Our client collect security deposit from dealers , at the year end our client provide them interest @ 5%,
Example:
our client received 50000 rs as security deposit , year end they providing 8% to the dealer , how can i make this process in sap, Kindly guide me is there any slandered configuration methods are available in SAP system ,
Regards
Ajeesh.s

Dear Expert
Thank x for the quick response ,
i would like to add some more points about my requirement
while reviving security deposit , Client post a transaction in sap with H indicator
Party a/c Dr
to
XXXXX
at the year end They are providing interest amount to the party by posting below manual entry (They download all the H Indicator transaction from SAP & calculate interest manually)
Interest on Security a/c Dr
TDS Payable a/c DR( If the interest amount is more than 5000)
To
Party
This become a burden at the time of year end ,they want to make the interest calculation process in an automatic way , But am confused Hw can i add this TDS ( If the interest amount is more than 5000), kindly guide me
Regards
Ajeesh.s

Terrible experience with Verizon customer care. Need update on security deposit.

Hi,
I disconnected my FIOS internet service about two months back. When I took the connection last year, I was asked to pay a security deposit of $400 and I paid this. After disconnecting FIOS, I am trying to get the status of the refund of my security deposit.
I have called close to ten times to the customer care and all the times, I have been given either false information or I was told they would call me back and that would not happen.
At this point, I am extremely disappointed and surprised about how an organization like Verizon could be so unprofessional.
I need to know the status of my security deposit. Has anyone else faced this kind of a problem? How was this resolved?
Regards,
Sathish

Since we haven't heard back from you or have received a form submission as requested in your private support case, it appears assistance is no longer required. If you need any future help with your Verizon service, please make a post here on the forums so we can assist.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Deducting TDS in AP Downpayment Request

Hello Experts,
Please help me to solve the problem
How to make advance payment by deducting TDS?
SAP advised to follow Down Payment but problem is that If we use AP Down Payment Invoice ,
balance of advance payment never shown in Vendors Ledger .
If we make payment through AP Down Payment Request we haven"t any provision for deducting TDS
How to solve this problem...?
Regards
Janeesh

Hi Gordon,
I also have the same Issue with my client. I agree with you Down payment request is not formal financial document at the same time I cannot use the Down Payment Invoice because the client don't want to pass the financial entries at the time of Down Payment Invoice. I am going with Down payment Request but, I need to deduct TDS in the Total request amount and I have to receive the payment on total Request Amount (after TDS) and the TDS financial entries should pass on at the time of final Invoice, I have one more question why the Withholding Tax field is available in Down payment Request document and row level?, I tried its not working and updating any value.
Please let me know you valuable solution
Regards,
Kiran

Security Deposit by Distributor - How to deduct TDS

Similar Messages

Maybe you are looking for