Security requirement for dialup connection

Dear All,
I have installed Cisco 3745 router with NM 8A/S module at central location which is connected to the PSTN network for dialup connectivity. Now remote users are connecting to central location through PSTN dialup connection.
Is it possible to do some configuration at central cisco 3745 router so that a specific telephone number subscriber can only make dialup connection to a specific NM 8A/S port.i.e. is it possible to restrict the diaiup users based on their telephoine number at the central router.
Also is it possible to create GRE or IPSec tunnel in this dialup connection.
With Regards
Anand

Check out the following link...
http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_configuration_guide_chapter09186a00800d984a.html

Similar Messages

  • Program ID Required for RFC Connection

    Hi All,
    I'm trying to create a RFC Connection betwen SAP BI and SSIS (SQL Server Integration Services). In SM59 screen i'm unable to get the appropriate Program ID required for the connection. Could someone please help me in knowing how to get it.

    Yogesh,
    While creating TCP\IP type RFC destination, when you select Radio button "Registered server program", there you have to provide Program Id there. So for your information:
    Program Id is a string which can be anything even your name.
    i know only R3 and XI integration and in that case you will make your RFC communication channel active first with a program Id(ant thing) and with logon credentials of other system + gateway host and service.
    then use that program id in RFC destination and test it.
    If get empty request then RFC destination is ok.
    BR,
    Alok

  • VPN Password Required for Each Connection

    Prior to installing 10.5.6, when I accessed my VPN the password was automatically sent. Now I am required to type it in for each connection, although my setup remains the same as it was. Can someone tell me how to do this automatically?? Thanks

    Hi,
    You need to upgrade the excel addin to 9.3.1.3 as it resolves the following issue
    Spreadsheet Add-in. In the Login dialog box, Essbase was not storing non-default port information.
    If Essbase was listening on a non-default port, that information was not being saved after having
    previously connected successfully. Upon subsequent logins, it was necessary to re-enter the nondefault
    server and port numbers; it was not saved in the Server drop-down list. Additionally, after a
    successful connection on one sheet, re-connection was necessary after switching to another sheet
    when a non-default port was used. [7118611, 7298976]
    Ok?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • New security required for managing rejections in UAR?

    I have been told by someone at SAP about several new authobjs required for SP06 UAR "reject" features.   Objects include:
       ManageRejectionsGenerateAction
       ViewManageRejectionReasons
       ManageRejectionsCancelGenerationAction
       ViewRejectUsers
       ViewManageRejections
       ViewReject
    I'd like to find out more about these to determine if all these are needed by reviewers OR security administrators OR both.   Anyone know where these are documented?
    TIA,
    hb

    Wild solution...
    1) Create a New User ID, which will be used for Just resetting the password based on the security question. This ID will have a password which everybody will know.
    This ID will have only few authorizations.
    2) Create a Custom Program which will take the User ID and the Question. Also some way of storing the Answer in some table (encrypted).
    Based on the ID, the question of the user will be displayed. Based on the Input by the user, the answer will be checked.
    3) If the answer is correct, reset the password and send a mail to the user id of the user. (Solution for resetting the password needs some analysis) The custom table will store user id, question, answer and the email id to which the email has to be sent.
    Reward Points if useful.
    Regards,
    Abhishek Jolly

  • HTTP/1.1 407 Proxy Authentication Required for cloud connection

    I am using Jdeveloper version 11.1.1.7.1 for ADF deployment on cloud service(Java and DB services).As instructed ,I have followed all the steps and in jdeveloper .when I tried to Authenticate the created connection with username and password, i am getting HTTP/1.1 407 Proxy Authentication Required .I am clueless how to solve this,Followed all the blogs but no luck.Please help on this,

    Presumably you are behind a FW, does your proxy require authentication if so did you set it with "Tools > Preferences > Web Browser and Proxy > Proxy Server Requires Authentication". Also what is the version of your JCS SDK ? You can check it by:
    java -jar javacloud.jar -version
    It should be something like 15.1.2.0 or later ..
    Jani Rautiainen
    Fusion Applications Developer Relations
    https://blogs.oracle.com/fadevrel/

  • Security warning for any connect VPN " Untrusted VPN server Certificate"

    Is there any way to disable this security warning  ( " Untrusted VPN server Certificate") with self sign certificate on the ASA 

    Hi Anton,
    Please have a look at the link below:
    http://docs.acl.com/ex/300/index.jsp?topic=%2Fcom.acl.ax.exception.installguide%2Fexception%2Finstallation%2Ft_installing_the_self-signed_certificate.html
    This is for IE. You should get steps for FF and CHROME out there easily as well.
    Regards,
    Kanwal
    Note: Please mark answers if they are helpful.

  • Username and Password Required for Wifi Connection, Not Being Asked for Username

    I just updated my iphone 4s to ios 8 and attempted to join my school's wireless network, which requires both a username and a password. i am being asked for a password but not a username.
    my question here is how to have the username be requested as well.
    thank you in advance for answering.

    Hi, did you ever find a solution to this?  I see your post is old, but the exact same thing has happened to me and I can't figure out what the generic username and password would be.  Any insight you have would be most helpful. Thanks!

  • WebSphere jars required for JNDI connection factory (App server, not file)

    I need to configure an initial context to a JNDI-defined WebSphere Topic Connection Factory. I believe the class needed is "com.ibm.websphere.naming.WsnInitialContextFactory", but I cannot determine the specific jars required to successfully execute the connection.
    Any help at all would be deeply appreciated.

    I have the same question. Who knows answer please reply

  • Wierd Requirement for Client connection

    Have a client which I put together several months ago. It was working at that time.
    On the bean server I'm starting with the params:
    -Dcom.sun.management.jmxremote.authentication=false
    -Dcom.sun.management.jmxremote.ssl=false
    -Dcom.sun.management.jmxremoteStart a ConnectorServer:
    JMXConnectorServer cs = JMXConnectorServerFactory.newJMXConnectorServer(serviceURL, null, mbs)
    cs.start()where mbs is the mbeanserver. This all starts fine and can connect with jconsole locally.
    The client pulls in the values from a cfg file and makes the call:
    JMXConnector conn = JMXConnectorFactory.connect(url, null);This throws the following exception, and note the url printed above the stack trace:
    UName thingfinder
    URL service:jmx:jmxmp://sois-esp-004.sois.ic.gov:60733
    Exception in thread "main" java.lang.NoClassDefFoundError: org/jboss/mx/notification/ListenerRegistry
         at javax.management.NotificationBroadcasterSupport.<init>(NotificationBroadcasterSupport.java:30)
         at javax.management.remote.generic.GenericConnector.<init>(GenericConnector.java:160)
         at javax.management.remote.jmxmp.JMXMPConnector.<init>(JMXMPConnector.java:118)
         at com.sun.jmx.remote.protocol.jmxmp.ClientProvider.newJMXConnector(ClientProvider.java:71)
         at javax.management.remote.JMXConnectorFactory.getConnectorAsService(JMXConnectorFactory.java:427)
         at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:310)
         at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
         at com.sra.pipeline.jmx.client.JMXUtils.buildUTable(JMXUtils.java:85)
         at com.sra.pipeline.jmx.client.JMXUtils.loadTables(JMXUtils.java:75)
         at com.sra.pipeline.jmx.client.JMXUtils.main(JMXUtils.java:171)have the jmxremote_optional.jar in the build path and checked it for the class it's looking for and did not find any org.jboss packages and no class by this name.
    Have changed from 1.6.0_03 to 1.6.0_12.
    Why is it looking for that class?
    Jim
    Edited by: jjones3566 on Mar 8, 2009 12:33 PM

    Hi there,
    I am new in java. I need help! with JMX. I have created a standard MBean eg: CpuInfoMBean which extends ThreadMXBean interface.
    the implementation class code CpuInfo has overriden getThreadInfo method like this
    ThreadMXBean mBean=ManagementFactory.getThreadMXBean();
    ThreadInfo getThreadInfo(long id, int maxDepth){
    return mBean.getThreadInfo(id,maxDepth);
    I have registered the management bean to the server
    In JMX console when i enter id=1 and maxDepth=100
    it does not display the stack trace information for the getThreadInfo method.
    where as if you register the ThreadMXBean directly to the MBean server
    when you enter id and maxDepth for getThreadInfo method it displays the stack trace information
    i dont understand the difference and whats wrong in my code.
    thanks,

  • Change connection timeout, not found waiting for dialup connection

    Using Firefox 6.02 on Vista 32.
    The dial-up connection is slow connecting which cause Firefox to time out with a page not found while waiting. Is there a setting to extend the time out?

    Mark,
    This has been implemented in Headstart PATCH6530_for_6i and PATCH6530_for_9i.
    Regards,
    Marcel

  • DHCP required for devices connected to a Cat6500

    Hi everyone
    on a Cat6500 is there a way to prevent devices with static IP addresses from getting access to the network and allow only devices with DHCP addresses? Maybe the combination of dhcp snooping and an access-list?

    I believe you are looking for DAI>
    Dynamic Arp Inspection.
    Check this link, it might help:
    http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a00804357b1.html#wp1041210
    Vlad

  • How to setup Linksys WRT120N for a dialup connection?

    I have a Linksys WRT120N wireless router. There is NO broadband modem connected to it. There is only a dialup modem inside the desktop computer.
    Windows XP SP3 is sensing that there is an always on connection to the internet with the Linksys WRT120N
    Question: How to I configure the Linksys WRT120N for a dialup connection?
    Thanks,
    Solved!
    Go to Solution.

    Update
    The DHCP Server "disabled" setting doesn't stick, it returns to "enable" when returning to the configuartion settings tab, for whatever reason.
    Anyway, everything else seems to be there, including the "MSHOME" for networking; but STILL doesn't recognize dialup as default connection.
    Here's an example of what I'm seeing:
    When a time sync program is run automatically at startup, before the Linksys router was added, it would WAIT for dialup connection to be made BEFORE syncing the time. 
    After Linksys router was added to the computer, the time sync program, when starting with windows, will NOT WAIT for a dialup connection to be made, it will attempt to sync with NO DIALUP CONNECTION being made.
    A temporary fix has been to go to Local Area Connection (the Linksys router connection), right-click and uncheck Internet Protocol (which will also uncheck client for microsoft networks and file and printer sharing).
    I've manually reset Linksys router back to factory defaults and waiting for any help.
    The USB Adapter has not been configured to work with the computer that will be networked.  Currently, I plugged it into the computer with the Linksys router to quickly give you all the information I have for the ipconfig /all
    (The networked computer will not always be used.  What prompted my post, is that first, what I am really after is trying to fix this problem with the time sync program seeing the internet connection as "on" when a dialup connection has not yet been made.  Then, I'll focus on the second computer networking.)
    As you requested here's the ipconfig /all info:
    Microsoft Windows XP [Version 5.1.2600]
    Windows IP Configuration
            Host Name . . . . . . . . . . . . : XXXXXXX
            Primary Dns Suffix  . . . . . . . :
            Node Type . . . . . . . . . . . . : Hybrid
            IP Routing Enabled. . . . . . . . : Yes
            WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter Wireless Network Connection:
            Connection-specific DNS Suffix  . :
            Description . . . . . . . . . . . : 802.11n USB Wireless LAN Card
            Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-XX
            Dhcp Enabled. . . . . . . . . . . : Yes
            Autoconfiguration Enabled . . . . : Yes
            IP Address. . . . . . . . . . . . : 192.168.1.101
            Subnet Mask . . . . . . . . . . . : 255.255.255.0
            Default Gateway . . . . . . . . . : 192.168.1.1
            DHCP Server . . . . . . . . . . . : 192.168.1.1
            DNS Servers . . . . . . . . . . . : 192.168.1.1
    Ethernet adapter Local Area Connection:
            Connection-specific DNS Suffix  . :
            Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
            Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-XX
            Dhcp Enabled. . . . . . . . . . . : Yes
            Autoconfiguration Enabled . . . . : Yes
            IP Address. . . . . . . . . . . . : 192.168.1.100
            Subnet Mask . . . . . . . . . . . : 255.255.255.0
            Default Gateway . . . . . . . . . : 192.168.1.1
            DHCP Server . . . . . . . . . . . : 192.168.1.1
            DNS Servers . . . . . . . . . . . : 192.168.1.1

  • What are the data collection requirements for CAND?

    Please explain the exact data collection requirements for CAND (Connected Analytics for Network Deployment). Thanks

    CAND needs to collect the following show command outputs for analysis: show version, show running-config, show module (or show diag, depending on the platform).

  • Invalid security certificate error when connecting from office for iPad

    Hi,
    I have Alfresco Community running on my NAS including the SharePoint protocol support and can access it from any desktop Microsoft Office application but when I try to "Add a Place" in any of the Microsoft Office for iPad apps I get the following
    error message: "Cannot Connect to Site - The site doesn't have a valid security certificate." followed by "Cannot connect to Server - The server may be unavailable. Check your internet connection and try again".
    I have the following configuration
    - Qnap NAS with QTS 4.1.3
    - JRE 8.6.0
    - Tomcat 7.0.50
    - Alfresco 5.0.c with Share and SPP installed
    - Tomcat, Alfresco and Share configured for SSL on 8443 using a self-signed certificate
    - SPP configured for SSL on 7070
    - iPad Air 2, iOS 8.2 and latest office apps
    - CA and server certificate installed on the desktop computers and the iPad
    Share and SPP can be reached on the respective ports and I get the websites as expected. And as mentioned desktop MS office applications can access Alfresco via SPP. But I cannot get it to work with the iPad office apps.
    Can anybody help with this, please? I know I am not running SharePoint but I assume the problem with the iPad office app is the same?
    Thanks
    Peter

    1. I can't say if it is sequential or not, I have never seen a message like that myself when doing add-on update checks - but I have seen other messages, like the update server not using a secure HTTPS address after that became a requirement for updates. <br />
    Plus, I have never used anything from Conduit - ''the founder of that company has a shady past with different internet companies puling all dorts of "stuff", IMO. And all Conduit add-ons were removed and banned from the official add-ons website a few years ago because of their "antics" and major user uproar at the time - just recently have we seen a few return''.
    2. Right-click individual addons and use ''Visit Homepage''' to see if that feature is being used as intended and where it takes you. Or use '''Find Update''' and see if that triggers that message, to discover which extensions are fro Conduit.
    3. IMO, you are better off updating each extension one at a time with '''Find Update''', as I mentioned above.

  • When I go to a website requiring login, and am logged in automatically, I still get prompted by Software Security Defice for master password. New w/Firefox 24.

    If I go to a website that requires a login & password, and I have it set up to automatically log me in, I get automatically logged in (it remembers by userid & password for that site), but the prompt from the Software Security Device for my master password appears as well. I can cancel the prompt and it goes away, but it shouldn't show up because I'm already logged in. This problem started happening after I downloaded Firefox 24 yesterday.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Note that Firefox Sync also requires you to enter the Master Password.

Maybe you are looking for