Select distinct and 2 inner joins in same select statement
can anyone guide me how to write the below query for higher performance. can I use for all entires or shall i split this,
please let me know your opinions.
SELECT DISTINCT werks matnr b~stlal idnrk postp d~aennr
sortf potx1 c~lkenz b~stlty stlst
INTO TABLE ltab_one
FROM mast AS a INNER JOIN stko AS b
ON a~stlnr = b~stlnr
AND a~stlal = b~stlal
INNER JOIN stas AS c
ON b~stlnr = c~stlnr
AND b~stlal = c~stlal
AND b~stlty = c~stlty
INNER JOIN stpo AS d
ON c~stlnr = d~stlnr
AND c~stlkn = d~stlkn
AND c~stlty = d~stlty
WHERE a~werks IN s_werks
AND ( ( d~andat IN s_datum
OR d~aedat IN s_datum
OR a~andat IN s_datum
OR a~aedat IN s_datum
OR b~andat IN s_datum
OR b~aedat IN s_datum
OR c~andat IN s_datum
OR c~aedat IN s_datum
) AND d~datuv >= lv_effdt )
AND a~stlan = '1'
AND matnr IN s_matnr.
WHERE a~werks IN s_werks
AND ( ( d~andat IN s_datum
OR d~aedat IN s_datum
OR a~andat IN s_datum
OR a~aedat IN s_datum
OR b~andat IN s_datum
OR b~aedat IN s_datum
OR c~andat IN s_datum
OR c~aedat IN s_datum
) AND d~datuv >= lv_effdt )
AND a~stlan = '1'
AND matnr IN s_matnr.
This part determines your performance, not the DISTINCT and not the joins.
What is in s_werks, s-datum, s_matnr typically? I guess there are better and worse conditions.
Similar Messages
-
Time Out by select on DD04L inner join DD04T
Hello,
I just installed ERP 2005. After the import of a language package (SMLT, IT, FR, ES) I get some problem.
If I logon with EN or IT (and I think with any language other than DE) many transaction get a Time Out error in the function module DDIF_FIELDINFO_GET by the following selection:
* get texts of primary language (inner join here !)
SELECT DD04L~ROLLNAME DD04L~DOMNAME DD04L~HEADLEN
DD04L~SCRLEN1 DD04L~SCRLEN2 DD04L~SCRLEN3
DD04T~DDLANGUAGE DD04T~DDTEXT DD04T~REPTEXT
DD04T~SCRTEXT_S DD04T~SCRTEXT_M DD04T~SCRTEXT_L
INTO TABLE Rolltexts
FROM DD04L inner JOIN DD04T
ON DD04T~ROLLNAME = DD04L~ROLLNAME AND
DD04T~AS4LOCAL = 'A' AND
DD04T~DDLANGUAGE = langu_loc
FOR ALL ENTRIES IN missing
WHERE DD04L~ROLLNAME = missing-ROLLNAME
AND DD04L~AS4LOCAL = 'A'.
That is, the ERP is using sequential read instead of direct read.
Any idea is welcomed.
Thanks & regards,
TommasoHello,
Thanks for your replies.
I checked OSS and I found nothing.
ST05 gives me this SQL command: (more than 500 sec!)
SELECT T_00 . "ROLLNAME" , T_00 . "DOMNAME" , T_00 . "HEADLEN" , T_00 . "SCRLEN1" , T_00 . "SCRLEN2" , T_00 . "SCRLEN3" , T_01 . "DDLANGUAGE" , T_01 . "DDTEXT" , T_01 . "REPTEXT" , T_01 . "SCRTEXT_S" , T_01 . "SCRTEXT_M" , T_01 . "SCRTEXT_L" FROM "DD04L"
T_00 INNER JOIN "DD04T" T_01 ON T_01 . "ROLLNAME" = T_00 . "ROLLNAME" AND T_01 . "AS4LOCAL" = 'A' AND T_01 . "DDLANGUAGE" = 'I' WHERE T_00 . "ROLLNAME" = 'VAL_TEXT' AND T_00 . "AS4LOCAL" = 'A'
I executed it in SQL Studio and I got also a big execution time.
But if I try
SELECT "ROLLNAME" , "DOMNAME" , "HEADLEN" , "SCRLEN1" , "SCRLEN2" , "SCRLEN3" FROM "DD04L" WHERE T_00 . "ROLLNAME" = 'VAL_TEXT' AND T_00 . "AS4LOCAL" = 'A'
I get the result in 1 ms.
Is there something wrong in the inner join?
What does it mean the operation "REOPEN"?
How can I see from ST05 if an index has been used?
Thanks & Regards,
Tommaso -
Hi,
I need to join three tables, based on some conditions (EKPO, EKBE and EKKN Note: All PO line items from EKPO will have a movement associated in the EKBE Table. Capture all PO line items where no matches found in the EKPO-EKBE join)
for the above requirement shall I write my query like this?
SELECT ekpo~ebeln
ekpo~ebelp
ekpo~loekz
ekpo~txz01
ekpo~matnr
ekpo~bukrs
ekpo~werks
ekpo~menge
ekpo~meins
ekpo~knttp
ekbe~vgabe
ekbe~bwart
ekbe~menge
ekbe~dmbtr
ekbe~shkzg
ekkn~sakto
ekkn~kostl
ekkn~ps_psp_pnr
INTO CORRESPONDING FIELDS OF TABLE i_podata
FROM ekpo LEFT OUTER JOIN ekbe ON ekbeebeln = ekpoebeln AND
ekbeebelp = ekpoebelp
INNER JOIN ekkn ON ekknebeln = ekpoebeln AND
ekknebelp = ekpoebelp
WHERE ekpo~werks IN s_werks AND
ekpo~ebeln IN s_ebeln.
Shall I use both Outer Join and Inner join in one Query?
Please correcte me.
Thanks
Frank RexHi,
You can use both inner join and outer join in the same select statement.
Ensure first all the inner joins between tables are declared and put the left outer join at the end.
Some sample code for your reference:
SELECT
AVBELN AKUNNR ABSTNK ABSTDK AVKORG AVTWEG AAUART AKNUMV
BPOSNR BMATNR BWERKS BSPART BLGORT BKZWI1
SUM( BKWMENG ) AS KWMENG DBZIRK D~VKGRP
EDISPO EPRCTR
FROM VBAK AS A INNER JOIN VBAP AS B ON AVBELN EQ BVBELN
INNER JOIN VBPA AS C ON CVBELN EQ BVBELN
INNER JOIN KNVV AS D ON DKUNNR EQ AKUNNR
AND DVKORG EQ AVKORG AND DVTWEG EQ AVTWEG
LEFT OUTER JOIN MARC AS E ON E~MATNR EQ
BMATNR AND EWERKS EQ B~WERKS
INTO CORRESPONDING FIELDS OF TABLE IT_ORDERS
WHERE A~VKORG IN SO_VKORG
AND A~VTWEG IN SO_VTWEG
AND A~KUNNR IN SO_KUNNR
AND A~ERDAT IN SO_ERDAT
AND A~AUART IN ('ZFOR','ZROR','ZEOR','ZDXR','ZXOR','ZRM1','ZGOR','ZSOR')
AND B~MATNR IN SO_MATNR
AND B~WERKS IN SO_WERKS
AND B~SPART IN SO_SPART
AND B~ABGRU EQ SPACE
AND A~LIFSK EQ SPACE
AND A~FAKSK EQ SPACE
AND B~VSTEL IN SO_VSTEL
AND B~LGORT IN SO_LGORT
AND C~KUNNR IN SO_SHIP
AND C~PARVW EQ 'WE'
AND D~VKGRP IN SO_VKGRP
AND D~BZIRK IN SO_BZIRK
AND B~LGORT NE '0950'
GROUP BY AVBELN AKUNNR ABSTNK ABSTDK
AVKORG AVTWEG AAUART AKNUMV B~POSNR
BMATNR BWERKS BSPART BKZWI1 D~BZIRK
DVKGRP BLGORT EDISPO EPRCTR E~MATGR.
Lakshminarayanan.
P.S.Mark all helpful answers for points. -
when i am trying to create an itunes account in ipad 3 and in payment method i select none and after it when i select create ID. "Please contact ITunes Support to complete the transcation" this message will appear. kindly help me
You can contact iTunes support via this page (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
Select Distinct and join in ODI
Hi,
I have following task to perform: I am loading metadata into Planning dimension from Oracle database. I have two tables
1. "Sales"
Columns: Name, Number, Value
Sample Data:
Product 1, 10, 200
Product 2, 30, 100,
Product 1, 15, 500
2. P&R
Columns:
Name, Alias
Product 1, SampleSoda1
Product 2, SampleSoda2,
Resource 1, CanForSoda,
Resource 2, CO2
What I need to do is: I have to select name and alias from second table of all products that were sold.
So I need to select distinct Name from Table 1, naxt join it with Table 2 (so I have Name and Alias) and load it to planning.
I am a little confused how to do it.
Any help would be great!
Best regards,
GregHi Greg,
What you can do is either :
- Create a yellow interface with your table Sales as source. Map the name column directly in the target. In the flow tab, click on your target and select "Distinct rows".
- Create a second interface, with your first interface as source. Select the "Use Temporary Interface as Derived Table (Sub-Select)" checkbox.
- Add your second datastore and join it. Or you can use a lookup table.
OR
- Create an interface with Sales and P&R as source (or set P&R as a lookup table).
- Go on the flow tab and select "Distinct rows".
If you've a lot a data in the first table, I would go for the first solution.
Hope it helps.
Regards,
JeromeFr
Edited by: JeromeFr on Feb 14, 2013 9:52 AM
To be more clear in the first step of solution 1 -
Dear Experts,
I have writen a inner join code with MKPF and MSEG which taking too much time, while I have used index.
Indexes are:
MSEG
MATNR
WERKS
LGORT
BWART
SOBKZ
MKPF
BUDAT
MBLNR
My Select Query is :
SELECT B~MATNR
B~MAT_KDAUF
B~MAT_KDPOS
B~BWART
B~MENGE
B~MEINS
B~AUFNR
INTO TABLE IT_MSEG
FROM MKPF AS A
INNER JOIN MSEG AS B
ON AMBLNR EQ BMBLNR
AND AMJAHR EQ BMJAHR
WHERE A~BUDAT IN BUDAT
AND B~MATNR IN MATNR
AND B~WERKS IN WERKS
AND B~LGORT IN LGORT
AND B~BWART IN BWART.hi,
you can use for all entries it will work faster then joins
About it:*
FOR ALL ENTRIES WHERE
Syntax
... FOR ALL ENTRIES IN itab WHERE ... col operator itab-comp ...
Effect
If the addition FOR ALL ENTRIES is specified before the language element WHERE, then the components comp of the internal table itab can be used as operands when comparing with relational operators.
The internal table itab must have a structured line type and the component comp must be compatible with the column col.
The logical expression sql_cond of the WHERE condition can comprise various logical expressions by using AND and OR. However, if FOR ALL ENTRIES is specified, there must be at least one Comparison with a column of the internal table itab, which can be specified either statistically or dynamically (Release 6.40 and higher). In a statement with a SELECTstatement with FOR ALL ENTRIES, the addition ORDER BY can only be used with the addition PRIMARY KEY.
The whole logical expression sql_cond is evaluated for each individual line of the internal table itab. The resulting set of the SELECT statement is the union of the resulting sets from the individual evaluations. Duplicate lines are automatically removed from the resulting set. If the internal table itab is empty, the whole WHERE statement is ignored and all lines in the database are put in the resulting set.
Notes
In Release 6.10 and higher, the same internal table can be specified after FOR ALL ENTRIES and after INTO.
The addition FOR ALL ENTRIES is only possible before WHERE conditions of the SELECT statement.
Example
Exporting all flight data for a specified departure city. The relevant airlines and flight numbers are first put in an internal table entry_tab, which is evaluated in the WHERE condition of the subsquent SELECT statement.
PARAMETERS p_city TYPE spfli-cityfrom.
TYPES: BEGIN OF entry_tab_type,
carrid TYPE spfli-carrid,
connid TYPE spfli-connid,
END OF entry_tab_type.
DATA: entry_tab TYPE TABLE OF entry_tab_type,
sflight_tab TYPE SORTED TABLE OF sflight
WITH UNIQUE KEY carrid connid fldate.
SELECT carrid connid
FROM spfli
INTO CORRESPONDING FIELDS OF TABLE entry_tab
WHERE cityfrom = p_city.
SELECT carrid connid fldate
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE sflight_tab
FOR ALL ENTRIES IN entry_tab
WHERE carrid = entry_tab-carrid AND
connid = entry_tab-connid.
hope it will help you
Rahul sharma
Edited by: RAHUL SHARMA on Sep 11, 2008 8:10 AM -
Inner Join for Dynamic Select statement
Hi All,
Can some one please help me in rewriting the below select statement where i have to remove the existing table1 by putting a dynamic table name which has the same table structure.
select a~zfield1
a~zfield2
from ztab1 as a
inner join ztab2 as b
on b~ztab1-zfield3 = a~ztab2-zfield3
where a~zfield4 = 'A'.
I am looking something as below. But encountering an error when using the below statement
select a~zfield1
a~zfield2
from (v_ztab1) as a
inner join ztab2 as b
on b~ztab1-zfield3 = a~ztab2-zfield3
where a~zfield4 = 'A'.
No Separate selects please. Please help me in rewriting the same select statement itself.
Regards,
PSKhi,
What error you are getting ?
Also INTO is missing from the statement.
SELECT pcarrid pconnid ffldate bbookid
INTO TABLE itab
FROM ( spfli AS p
INNER JOIN sflight AS f ON pcarrid = fcarrid AND
pconnid = fconnid )
WHERE p~cityfrom = 'FRANKFURT' AND
p~cityto = 'NEW YORK' .
thanks -
Select SUM( ) in inner join - error in code
Hi All,
The following code is using ABAP OO and I get the following error
E:The addition "FOR ALL ENTRIES" excludes all aggregate functions with
the exception of "COUNT( * )", as the single element of the SELECT
clause.
Here is the Code:
select a/bic/ZEDM_ENTP amaterial a~/bic/zedm_stid
a/bic/ZEDM_SDT a/bic/ZEDM_MINH a~/bic/ZEDM_EHD
SUM( b~/bic/ZEDM_QPLN )
c~/bic/ZDEMQTY
from /bic/azdrp_1900 as a inner join /bic/azdrp_0400 as b
on
a/bic/ZEDM_ENTP = b/bic/ZEDM_ENTP and
amaterial = bmaterial and
a/bic/zedm_stid = bplant and
a/bic/ZEDM_SDT = b/bic/zedm_pshp
inner join /bic/azrp_0800 as C
on
amaterial = cmaterial and
a/bic/zedm_stid = c/bic/zedm_stid and
a/bic/ZEDM_SDT = c/bic/ZEDM_ESDT
into table z_it_inv for all entries in
RESULT_PACKAGE where
a~/bic/ZEDM_ENTP = RESULT_PACKAGE-/bic/ZEDM_ENTP
and a~material = RESULT_PACKAGE-material
and a~/bic/ZEDM_SDT = RESULT_PACKAGE-/BIC/OIZEDM_EDT
and a~/bic/zedm_stid = RESULT_PACKAGE-/BIC/OIZEDM_TOST
group by b/bic/ZEDM_ENTP bmaterial b~plant
b~/bic/zedm_pshp
Can you please tell me how to correct this?
ThanksHi,
You can get all records first and then LOOP AT Internal table and use COLLECT statement to sum up required column.
This will be a better idea than trying to use SUM in SELECT with JOINS.
ashish -
Select querry using inner join
Hi Friends,
I need to fetch data from two tables, I used inner join but I am not able to fetch the data in some fields can any one tell me what is wrong in this select querry.
SELECT but000~partner
but000~name_org1
but000~name_first
but000~name_last
but000~bpext
FROM but000 INNER JOIN dfkkop ON but000partner = dfkkopgpart
INTO table lt_but000
WHERE but000~partner IN so_part
AND dfkkop~faedn IN so_faedn.
Thanx in advance,
Parvezhi Lutin,
SELECT but000~partner
but000~name_org1
but000~name_first
but000~name_last
but000~bpext
FROM but000 INNER JOIN dfkkop ON but000partner = dfkkopgpart <------check this condition,it has to *satisfy both table
INTO table lt_but000
WHERE but000~partner IN so_part
AND dfkkop~faedn IN so_faedn.
Regards,
siva
Message was edited by:
SivaKumar -
table
can any please modify the query
thanking in advance
BEGIN OF t_initord OCCURS 0,
vbeln LIKE vbak-vbeln, " Sales Order
posnr LIKE vbap-posnr, " Sales Order Line Item
auart LIKE vbak-auart, " Sales Order Type
bezei LIKE tvakt-bezei, " Sales Order Type Text
billdo Like vbrk-vbeln, "billing document number
matnr LIKE vbfa-matnr, " Material
maktx LIKE makt-maktx, " Material Description
bstnk LIKE vbak-bstnk, " Customer PO number
bukrs LIKE vbak-bukrs_vf, " Company Code..
vkorg LIKE vbak-vkorg, " Sales Org
vtweg LIKE vbak-vtweg, " Distribution Channel
spart LIKE vbak-spart, " Division
vkgrp LIKE vbak-vkgrp, " Sales Group
augru LIKE vbak-augru, " Order Reason
abgru LIKE vbap-abgru, " Reson for rejection
kwmeng LIKE vbap-kwmeng, " Order Line quantit
deliv LIKE likp-vbeln, " Delivery Number
delit LIKE lips-posnr, " Delivery Number
rfmng LIKE vbfa-rfmng, " Delivery Qty..
vbtyp_n LIKE vbfa-vbtyp_n, " R12 Defect 8938.
mrnkz LIKE vbkd-mrnkz, " Subsequent Invoicing
docurr LIKE vbak-waerk, " Document Currency
netwr LIKE vbap-netwr, " Line Item Amt in Doc curr
ocdate LIKE vbak-aedat, " Order change date
objnr LIKE vbap-objnr, " Object number
rad LIKE sy-datum, " Requested Arrival Date
submi LIKE ekko-submi, " Collective number
plant1 LIKE vbap-werks, " Supplying Plant
ernam LIKE vbak-ernam, " Order Created by
erdat LIKE vbak-erdat, " Order Created on
lifnr LIKE ekko-lifnr, " Vendor
soldto LIKE vbak-kunnr, " Sold-to Party
shipto LIKE vbak-kunnr, " Ship-to Party
etenr LIKE vbep-etenr, " Sales Order schedule line
bmeng LIKE vbep-bmeng, " Order Sch Line quantity
vrkme LIKE vbap-zieme, " Sales Order UOM
cad LIKE sy-datum, " Confirmed Arrival Date
ktokk LIKE lfa1-ktokk, " Vendor account group
docurramt LIKE vbap-netwr, " Document Currency Amount
locurr LIKE vbak-waerk, " Local Currency
locurramt LIKE vbap-netwr, " Local Currency Amount
werks1 LIKE vbap-werks, " Supplying Plant
werks_name1 LIKE t001w-name1, " Plant description
lifnr_name1 LIKE lfa1-name1, " Name of the Vendor
stat TYPE g_stat_typ, " Status Code
lstatus TYPE g_stext_typ, " Last Status
soappr TYPE tj30t-txt30, " Sales Order Approval
bdnum LIKE vbfa-vbeln, " Billing doc number
bdlin LIKE vbrp-posnr, " Billing Item
uecha_b LIKE vbrp-uecha, " Item of Batch split
uecha_d LIKE lips-uecha, " Item of Batch split
END OF t_initord.
This is the internal table
to get the details wrote a select query
can any one please correct the select query
SELECT t1vbeln t2posnr t1auart t4bezei
t2matnr t5maktx
t1bstnk t1bukrs_vf t1vkorg t1vtweg t1spart t1vkgrp
t1augru t2abgru t2kwmeng t8vbeln
t8posnn t8rfmng t8vbtyp_n t7mrnkz t2waerk t2netwr
t1aedat t1objnr t1vdatu t1submi t2werks t1ernam t1~erdat
t6lifnr t1kunnr t9~kunnr
INTO TABLE t_initord
FROM vbak AS t1
INNER JOIN vbap AS t2
ON t1vbeln EQ t2vbeln
LEFT OUTER JOIN tvakt AS t4
ON t1auart EQ t4auart
AND t4~spras EQ c_en
LEFT OUTER JOIN makt AS t5
ON t2matnr EQ t5matnr
AND t5~spras EQ c_en
LEFT OUTER JOIN vbpa AS t9
ON t1vbeln EQ t9vbeln
AND t9~parvw EQ c_we
LEFT OUTER JOIN ekko AS t6
ON t1submi EQ t6ebeln
LEFT OUTER JOIN vbkd AS t7
ON t1vbeln EQ t7vbeln AND
t7~posnr EQ c_initposnr
LEFT OUTER JOIN vbfa AS t8
ON t2vbeln EQ t8vbelv AND
t2posnr EQ t8posnv
WHERE t1~vbeln IN s_slord
AND t1~vkbur IN s_sloff
AND t1~vkgrp IN s_slgrp
AND t1~kunnr IN s_custag
AND t1~auart IN s_ortyp
AND t1~vkorg IN s_slorg
AND t1~vtweg IN s_disch
AND t1~spart IN s_divi
AND t1~erdat IN s_date
AND t1~bukrs_vf IN s_ccode
AND t2~ernam IN s_slcre.
i need to modify the above query to get the additional information into the above table
billing doument number
document currency
document currency amount
billed quantity
sold to country
ship to countryYou can also refer to this code... for making your code better..
SELECT MATNR
WERKS
DISMM
DISPO
BESKZ INTO TABLE I_MARC FROM MARC
WHERE WERKS IN S_WERKS AND BESKZ = 'F' AND DISMM <> 'ND'.
IF NOT I_MARC IS INITIAL.
SELECT MATNR
MAKTX INTO TABLE I_MAKT FROM MAKT
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
ENDIF.
REFRESH I_MDPS.
REFRESH I_MDEZ.
REFRESH I_MT61D.
REFRESH I_MDPS2.
REFRESH I_MDEZ2.
LOOP AT I_MARC INTO WA_MARC.
CALL FUNCTION 'MD_STOCK_REQUIREMENTS_LIST_API'
EXPORTING
MATNR = WA_MARC-MATNR
WERKS = WA_MARC-WERKS
TABLES
MDEZX = I_MDEZ
EXCEPTIONS
MATERIAL_PLANT_NOT_FOUND = 1
PLANT_NOT_FOUND = 2
OTHERS = 3
LOOP AT I_MDEZ.
I_MDEZ2-MATNR = WA_MARC-MATNR.
I_MDEZ2-WERKS = WA_MARC-WERKS.
MOVE-CORRESPONDING I_MDEZ TO I_MDEZ2.
APPEND I_MDEZ2.
ENDLOOP.
CLEAR I_MDEZ.
CLEAR I_MDEZ2.
ENDLOOP.
Deleting teh records from the internal table which are
nither purchase order nor purchase requisition.
if pur_ord = 'X' and Pur_req = 'X'.
delete i_mdez2 where delkz <> 'BA' and delkz <> 'BE'.
endif.
if pur_ord = 'X' and Pur_req <> 'X'.
delete i_mdez2 where delkz <> 'BE'.
endif.
if pur_req = 'X' and pur_ord <> 'X'.
delete i_mdez2 where delkz <> 'BA'.
endif.
Populating the final internal table to be displayed.
Sort i_mdez2 by matnr werks.
SORT I_MAKT BY MATNR.
LOOP AT I_MDEZ2 WHERE LIFNR IN S_LIFNR.
wa_final-werks = i_mdez2-werks.
WA_FINAL-LIFNR = I_MDEZ2-LIFNR.
WA_FINAL-EXTRA = I_MDEZ2-EXTRA.
WA_FINAL-MNG01 = I_MDEZ2-MNG01.
WA_FINAL-AUSKT = I_MDEZ2-AUSKT.
WA_FINAL-UMDAT = I_MDEZ2-UMDAT.
WA_FINAL-WERKS = I_MDEZ2-WERKS.
WA_FINAL-MATNR = I_MDEZ2-MATNR.
wa_final-delkz = i_mdez2-delkz.
For Message to be displayed with the Purchase Order and Purchase Requisition.
PERFORM TEXT_EXCEPTION.
READ TABLE I_MAKT INTO WA_MAKT WITH KEY MATNR = WA_FINAL-MATNR BINARY SEARCH.
IF SY-SUBRC = 0.
WA_FINAL-MAKTX = WA_MAKT-MAKTX.
ENDIF.
APPEND WA_FINAL TO I_FINAL .
ENDLOOP.
IF SY-SUBRC <> 0.
MESSAGE I058.
leave program.
ENDIF.
Selecting the Purchase Organisation from the EKKO table.
if not i_final is initial.
SELECT EBELN EKORG LIFNR INTO TABLE I_EKKO FROM EKKO
FOR ALL ENTRIES IN I_FINAL
WHERE LIFNR = I_FINAL-LIFNR.
Selecting the name of the vendor from the LFA1 table.
select lifnr name1 into table i_lfa1 from lfa1
for all entries in i_final
where lifnr = i_final-lifnr.
Selecting the current date from the eban table.
select matnr lfdat into table i_eban from eban
for all entries in i_final
where matnr = i_final-matnr." and bnfpo = i_ekpo-bnfpo.
endif.
if not i_ekko is initial.
Selecting the Unit Price from EKPO for finding the Extended amount.
SELECT EBELN ebelp NETPR MATNR banfn bnfpo INTO TABLE I_EKPO FROM EKPO
FOR ALL ENTRIES IN I_EKKO
WHERE EBELN = I_EKKO-EBELN.
endif.
if not i_ekpo is initial.
Selecting the current date from the Eket table.
select ebeln ebelp eindt into table i_eket from eket
for all entries in i_ekpo
where ebeln = i_ekpo-ebeln and ebelp = i_ekpo-ebelp.
endif.
*Sorting the internal tables.
SORT I_EKKO BY LIFNR.
sort i_lfa1 by lifnr.
SORT I_EKPO BY MATNR.
sort i_eket by ebeln ebelp.
sort i_eban by matnr.
LOOP AT I_FINAL INTO WA_FINAL.
READ TABLE I_EKKO INTO WA_EKKO WITH KEY LIFNR = WA_FINAL-LIFNR.
WA_FINAL-EKORG = WA_EKKO-EKORG.
wa_final-ebeln = wa_ekko-ebeln.
read table i_lfa1 into wa_lfa1 with key lifnr = wa_final-lifnr.
wa_final-name1 = wa_lfa1-name1.
READ TABLE I_EKPO INTO WA_EKPO WITH KEY MATNR = WA_FINAL-MATNR.
wa_final-ebelp = wa_ekpo-ebelp.
WA_FINAL-NETPR = WA_EKPO-NETPR.
if wa_final-delkz = 'BA'.
read table i_eban into wa_eban with key matnr = wa_final-matnr.
wa_final-dat00 = wa_eban-lfdat.
endif.
if wa_final-delkz = 'BE'.
read table i_eket into wa_eket with key ebeln = wa_final-ebeln ebelp = wa_final-ebelp.
wa_final-dat00 = wa_eket-eindt.
endif.
WA_FINAL-EXTND_AMOUNT = WA_FINAL-MNG01 * WA_FINAL-NETPR.
MODIFY I_FINAL FROM WA_FINAL TRANSPORTING EKORG name1 dat00 EXTND_AMOUNT.
ENDLOOP.
In this I have taken many internal tables... according to the database table I am extracting from .. then I am bringing all the record in the final internal table which will be containing teh records from all the internal table that i have used..
Regards,
Jayant
<b>Please award if helpful</b> -
Hi all,
give me the query with innerjoin
Based on the input values of Material number (MARC-MATNR) from selection screen check and get the Special Procurement type details from MARC-SOBSL and Material description details from MAKT-MAKTX.
basha....
Moderator message - instead of asking, you should try to write the code yourself and get back to the forum if you have a specific question.
Edited by: Rob Burbank on Apr 19, 2009 4:46 PMHi,
Please Test the following Sample Code it is according to your requirement hope will solve out your problem,
TABLES: marc.
SELECt-OPTIONS somatnr for marc-matnr.
TYPES: BEGIN OF ty_matnr,
matnr LIKE marc-matnr,
sobsl LIKE marc-sobsl,
maktx LIKE makt-maktx,
END OF ty_matnr.
DATA: it_matnr TYPE STANDARD TABLE OF ty_matnr WITH HEADER LINE.
SELECT marc~matnr marc~sobsl makt~maktx
into CORRESPONDING FIELDS OF TABLE it_matnr
from marc INNER JOIN makt on ( marc~matnr eq makt~matnr )
WHERE marc~matnr in somatnr.
Best Regards,
Faisal -
How to re-write this big SELECT Query with INNER JOINs?
Hi Experts
I have a performance killer SELECT query with an inner join of 3 tables u2013 VBAP, VBAK and VBEP together, which populates records to an internal table INT_COLL_ORD. Based on these records selected, in another SELECT query, records are fetched from VBUK table to the internal table INT_VBUK.
SELECT A~VBELN A~POSNR A~MATNR A~KWMENG A~KBMENG A~ERDAT A~ERZET A~PSTYV D~AUART E~ETTYP E~EDATU
INTO TABLE INT_TAB_RES
FROM VBAP AS A INNER JOIN VBAK AS D
ON D~VBELN EQ A~VBELN AND D~MANDT EQ A~MANDT
INNER JOIN VBEP AS E
ON E~VBELN EQ A~VBELN AND E~POSNR EQ A~POSNR AND E~MANDT EQ A~MANDT
WHERE A~VBELN IN s_VBELN AND
D~auart in s_auart AND
D~vkorg in s_vkorg AND
D~vbtyp eq 'C' AND
( ( matnr LIKE c_prefix_sp AND zz_msposnr NE 0 AND kbmeng EQ 0 )
OR ( matnr LIKE c_prefix_fp AND kwmeng NE A~kbmeng ) ) AND
A~ABGRU EQ SPACE AND
A~MTVFP IN R_MTVFP AND
A~PRCTR IN R_PRCT AND
E~ETENR EQ '1'.
SORT INT_COLL_ORD BY VBELN POSNR ETTYP.
DELETE ADJACENT DUPLICATES FROM INT_TAB_RES COMPARING VBELN POSNR.
CHECK NOT INT_TAB_RES [] IS INITIAL.
SELECT VBELN UVALL CMGST INTO TABLE INT_VBUK
FROM VBUK FOR ALL ENTRIES IN INT_TAB_RES
WHERE VBELN = INT_TAB_RES-VBELN AND UVALL NE 'A'.
Now, the requirement is:
I want to split this query. Like, first join VBAK and VBUK first. With this selection, go to the inner join of VBAP and VBEP (on key VBELN) to get the results. How can I re-write this Query?
Please help.
Thx n RgdsHi Nagraj
As of your suggestion, I have re-written the query as below:
* Declarations
TYPES: BEGIN OF TYP_COLL_ORD,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBUP-POSNR,
MATNR LIKE VBAP-MATNR,
KWMENG LIKE VBAP-KWMENG,
KBMENG LIKE VBAP-KBMENG,
ERDAT LIKE VBAK-ERDAT,
ERZET LIKE VBAK-ERZET,
PSTYV LIKE VBAP-PSTYV,
AUART LIKE VBAK-AUART, u201Calready exists in type
ETTYP LIKE VBEP-ETTYP,
EDATU LIKE VBEP-EDATU.
TYPES: END OF TYP_COLL_ORD.
DATA: INT_COLL_ORD TYPE TABLE OF TYP_COLL_ORD WITH HEADER LINE.
TYPES: BEGIN OF TYP_VBUK,
AUART LIKE VBAK-AUART, u201Chave added this field
VBELN LIKE VBUK-VBELN,
UVALL LIKE VBUK-UVALL,
CMGST LIKE VBUK-CMGST.
TYPES: END OF TYP_VBUK.
DATA: INT_VBUK TYPE TABLE OF TYP_VBUK WITH HEADER LINE.
*QUERY#1 u2013 for VBAK & VBUK Join
SELECT A~AUART B~VBELN B~UVALL B~CMGST
INTO TABLE INT_VBUK
FROM VBAK AS A INNER JOIN VBUK AS B
ON A~VBELN EQ B~VBELN
WHERE A~VBELN IN s_VBELN AND
A~auart in s_auart AND
A~vkorg in s_vkorg AND
A~vbtyp eq 'C' AND
B~UVALL NE 'A'.
IF NOT INT_VBUK[] IS INITIAL.
SORT INT_VBUK BY VBELN.
DELETE ADJACENT DUPLICATES FROM INT_VBUK COMPARING VBELN.
*QUERY#2 u2013 for VBAP & VBEP Join
SELECT A~VBELN A~POSNR A~MATNR A~KWMENG A~KBMENG A~ERDAT A~ERZET A~PSTYV B~ETTYP B~EDATU
INTO TABLE INT_COLL_ORD
FROM VBAP AS A INNER JOIN VBEP AS B
ON B~VBELN EQ A~VBELN AND B~POSNR EQ A~POSNR AND B~MANDT EQ A~MANDT
FOR ALL ENTRIES IN INT_VBUK
WHERE A~VBELN = INT_VBUK-VBELN AND
( ( matnr LIKE c_prefix_sp AND zz_msposnr NE 0 AND kbmeng EQ 0 )
OR ( matnr LIKE c_prefix_fp AND kwmeng NE A~kbmeng ) ) AND
A~ABGRU EQ SPACE AND
A~MTVFP IN R_MTVFP AND
A~PRCTR IN R_PRCT AND
B~ETENR EQ '1'.
ENDIF.
SORT INT_COLL_ORD BY VBELN POSNR ETTYP.
DELETE ADJACENT DUPLICATES FROM INT_COLL_ORD
COMPARING VBELN POSNR.
CHECK NOT INT_COLL_ORD[] IS INITIAL.
LOOP AT INT_COLL_ORD.
CLEAR: L_MTART,L_ATPPR,L_ETTYP.
IF L_PREVIOUS_ETTYP NE INT_COLL_ORD-ETTYP OR
L_PREVIOUS_AUART NE INT_COLL_ORD-AUART.
READ TABLE INT_OVRCTL WITH KEY AUART = INT_COLL_ORD-AUART ETTYP = INT_COLL_ORD-ETTYP.
CHECK SY-SUBRC NE 0.
Now, the issue is:
Please note that declaration for INT_COLL_ORD has a field AUART, which is used in further parts of program (see the statement just above)
But, since neither VBAP nor VBEP contains AUART field, it cannot be fetched through the QUERY#2. So this value is not populated into INT_COLL_ORD through SELECT Query.
Since this field is used in later part of program & that the internal table has no value for this field, it dumps!!
How to include this value into the INT_COLL_ORD?
Plz suggest.... -
Issue when suming the field in Select query using inner join
Hi All,
SELECT A~OI_SHNUM
A~FORWAGENT
A~ROUTE
A~SHTYP
A~DTSHP_EACT
A~/BIC/GTCLICENS
A~/BIC/GTCADD04
A~COMP_CODE
SUM( C~GRS_WGT_DL )
C~UNIT_OF_WT
INTO TABLE I_LAYONE
FROM ( ( /BIC/ANTCD000200 AS A
INNER JOIN /BIC/AGSSD000700 AS B ON BOI_SHNUM = AOI_SHNUM )
INNER JOIN /BIC/AGSSD000600 AS C ON CDELIV_NUMB = BDELIV_NUMB ).
I need to sum the field C~GRS_WGT_DL
While compiling it show the error given below
The field "C~UNIT_OF_WT" from the SELECT list is is missing in the
GROUP BY clause. is missing in the GROUP BY clause. is missing in the
GROUP BY clause. is missing in the GROUP BY clause. is missing in the
GROUP BY clause. is "C~UNIT_OF_W
with regards,
ThambeHi,
Try the following SQL statement. Hope it helps you.
SELECT A~OI_SHNUM
A~FORWAGENT
A~ROUTE
A~SHTYP
A~DTSHP_EACT
A~/BIC/GTCLICENS
A~/BIC/GTCADD04
A~COMP_CODE
SUM( C~GRS_WGT_DL )
C~UNIT_OF_WT
INTO TABLE I_LAYONE
FROM ( ( /BIC/ANTCD000200 AS A
INNER JOIN /BIC/AGSSD000700 AS B ON BOI_SHNUM = AOI_SHNUM )
INNER JOIN /BIC/AGSSD000600 AS C ON CDELIV_NUMB = BDELIV_NUMB )
GROUP BY
A~OI_SHNUM
A~FORWAGENT
A~ROUTE
A~SHTYP
A~DTSHP_EACT
A~/BIC/GTCLICENS
A~/BIC/GTCADD04
A~COMP_CODE.
Murthy. -
Select-options: in inner join
in this peace of code i got error message like:
The column name "VBELN" has two meanings..
Please let me know how to resolve this <b>select-options:</b> problem
tables:vbap,lips,likp.
data: begin of first occurs 0,
vbeln1 like vbap-vbeln,
matnr2 like vbap-matnr,
werks3 like lips-werks,
route4 like likp-route,
end of first.
select-options: enter for vbap-vbeln.
select
a~vbeln
a~matnr
b~werks
c~route
into table first
from vbap as a
inner join lips as b
on avbeln = bvbeln
inner join likp as c
on bvbeln = cvbeln
<b> where vbeln in enter.</b>
loop at first.
write:/2 sy-vline, first-vbeln1,
sy-vline,first-matnr2,
sy-vline,first-werks3,
sy-vline,first-route4.
endloop.
Thanks In advance
~~SANDY~~~Hi,
Try this one,it is working fine,
tables:vbap,lips,likp.
data: begin of first occurs 0,
vbeln like vbap-vbeln,
matnr like vbap-matnr,
werks like lips-werks,
route like likp-route,
end of first.
select-options: enter for vbap-vbeln.
<b>select avbeln amatnr bwerks croute into corresponding fields of table first
from vbap as a inner join lips as b on avbeln = bvgbel
inner join likp as c on bvbeln = cvbeln
where a~vbeln in enter.</b>
loop at first.
write:/2 sy-vline, first-vbeln,
sy-vline,first-matnr,
sy-vline,first-werks,
sy-vline,first-route.
endloop.
Regards,
Padmam. -
Diff between database view and inner join
Hello,
I need to select data from multiple tables. I need to choose between 2 options.
1) create a database view and use this view for select.
2) write an inner join in abap prorgam.
In which cases we should create a view and in which cases we should use a inner join?
What are the factors which decide these?
Pls advice.
Thanks,
Rupali.Hi,
Both are same..
But if you use regulary and used view in Multiple programs then create view..
If inner join in abap prorgam between two or more table used in less Programs and do not want to
create View (Means not to create transport request) then go for JOin in Program.
Prabhudas
Maybe you are looking for
-
I have been creating a showreel of work in iDVD6. It has all been going swimmingly, except that the Quicktime Movies that I have exported from FCP and imported into iDVD, which are 16:9, are coming out squashed 4:3 (i.e square pixels. The menu and su
-
Custom page size in Illustrator CS6 and CC
Hello, send video with error Illustrator CC, which is not renewed custom page size. I have to click to another page and then back up to the size of their own. In Illustrator CS6 it worked. More can be seen on video here: http://screenr.com/3lxH Perha
-
Allow me to dismiss / kill "Signature requires validating" banner
With monitors more squat than ever, why is Acrobat 9 using bigger icons and banners at the top? Pretty soon there will be no space for the actual document. Well, here's one thing to fix. When I open a document with a questionable digital signature,
-
On my Mac, when I exit "full screen" with ICAL, ICAL disappears. It appears to slide off to the right side of the screen.
-
SSL, POP3, and SMTP
I keep getting emails from about setting SSL settings for POP3 and SMTP. I have it configured on my main email settings for my client. Do I have to set it as well for my Blackberry? And if so how? Solved! Go to Solution.