Selected G/L account should be posted through selected document type only

Hi friends,
i have some G/L accounts for eg G/L account from 2400000 to 2400200. if i do any postings for these G/L account, it should be in the following document types- CP and BP. how i can restrict this ... Plz help me..

HI,
You can do the settings in OB28 (maintain validation)
Regards,
Sameer

Similar Messages

  • Error 'Specify account number' while posting a parked document through FBV0

    Hi,
    I am getting an error 'Specify account number' while posting a parked document through transaction FBV0.
    I am not able to figure it out as to what account number it is referring to. Since the document is parked I assume the GL account used has no problem. Please help.

    Hi,
    Try to change the Account number and then save or post the data. I think Once We Parking the Document it wont allow to post the data without changing.
    Try same scenario in the development its be useful
    Regards,

  • Error when select posting level in document type

    Hi,
    Did anyone have an experience to face the Abab run time error when select "posting level" in document type?
    The Error is : GETWA_NOT_ASSIGNED
    Short text
    Field symbol has not yet been assigned.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_UC_ITKEY_FACTORY===========CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.

    If you searched the notes, as Dan proposed (and didn't find anything relevant), and the answer to the Greg's question is positive, then I would suggest regeneration data basis and ConsArea due to data model inconsistency.
    If it doesn't not help - open customer message to SAP.
    Edited by: Eugene Khusainov on Jan 26, 2010 10:26 AM

  • Posting Key and Document type

    Hello,
    I have just detected an inconsistency in one of my SAP environment (Development).  I have an invoice posted from the SD module, document type of this invoice is RV.
    If there is a reason to cancell this invoice, the transaction used is VF11. The document type in SD for this cancellation is S1. Thereafter an FI document is generated with document type AB.
    Even though the settings in both Production and Acceptance and Developement are the same.
    I have realised that the initial document when cancelled (reversed) has an FI document RV  and posting key 11. whiles in customizing the settings for posting keys and document types are different from what has been customized. Below is my current settings.
    The posting key 01 has a  reversed posting key 12 and the document type RV has a reverse document type AB. This customizing is in correct in SPRO.
    Transactions : OB41 and OBA7
    Can anyone help on this....
    Thanks
    Elvis

    Hello,
    Did you verify whether AB document type in OBA7 is marked in "Account Types allowed" the Customer checkbox?
    If not, maybe that is why it is not selecting AB as the reversal document type for RV, even though it is set up in RV document the AB document type as reverse document type.
    Other than this (if the mentioned above doesn't solve your issue), I would say there should be any user-exit that can be changing the document type, according to some specific business rule of your SAP client or even a substitution.
    I hope it helps you.
    Regards,
    Daniel.

  • Restrict display and posting for specific document types

    Hi,
    Is it possible to restrict display and posting for specific document types? I want to restrict authorization to SM document type in FS10N, and KSB1 tcode. Please help
    Best Regards,
    KIRAN.

    Sandipan Choudhury wrote:
    FS10N checks for this object ("Check" in Su24) but when user doesnot has this authorization object he gets access to all doc types and when the user is restricted to specific doc types (object present in user's authorization) he will get access to only those doc types. This is how the authorization check for F_BKPF_BLA works, in other words this authorization is Optional.
    Sorry, but this is not true and seems to be an invention of how you would like it to work...
    The coding works like this (generally):
        if sy-subrc ne 0.
          select single * from  t003 where blart = postab-blart.
          check sy-subrc = 0.
          blrtab-blart = t003-blart.
          blrtab-brgru = t003-brgru.
          append blrtab.
        endif.
        if blrtab-brgru ne space.    "<--- important condition!!
          authority-check object 'F_BKPF_BLA'
               id 'BRGRU' field blrtab-brgru
               id 'ACTVT' field actvt.
          if sy-subrc ne 0.
            rcode = 4.
          endif.
        endif.
      endif. 
    The "optional" aspect is whether or not the document type has an auth group on it in T003, failing which the check is suppressed.
    If it reaches the check, then it found something and then checks that selected value.
    Moral of the story:
    --> Do not believe SU53.
    --> Do not make assumptions from ST01 traces.
    --> Read the documentation carefully.
    --> Read the code to see how it really works (you can jump to the coding location from the trace).
    Cheers,
    Julius

  • Line item posted?? document type wise

    Hi all sap guru's
    hwo to findout how many lines item posted for each doucment type???
    regards
    ss

    Hi,
    Goto T.Code:FB03
    Then click on Documents list
    Then you can give the inputs like company code,Fiscal year,Document type, posting date.
    Then you can get the list of documents posted based on document type.
    all the best
    Prasad

  • Period is closed for posting or correct document type is not being used

    Hi All,
    I am trying to post transaction in AB01. But i am getting below error.
    I have checked OB52 and the periods for "+" & "A" are open for 2012.
    Error:
    Period is closed for posting or correct document type is not being used.
    Please assist

    document type i am using is AA.check it other side entery documenttype period open or not

  • Where to change posting key for Document type RG?

    Hi ,
    May I know where is IMG path to change posting key for Document type RG?
    Thanks.

    Hi,
    Posting key is not assigned to the document types.
    Posting key can be assigned to a particular trnsaction event etc., for example in OB40 for each transaction key in tax area, you can ddefine the posting key for bedit and credit.
    However you have the option to create a validation to check that this particular document type is allowed to be posted with certain posting keys. Validation can be created in OB28, GGB0. The details are available in SDN. Please search that.
    Regards,
    Gaurav

  • When i call someone i can not hear the phone ring or the people talking.  they can not hear me either.  what i do notice if i select speaker then i can hear them through the speaker phone only

    when i call someone i can not hear the phone ring or the people talking.  They can not hear me either.  what i do notice if i select speaker then i can hear them through the speaker phone only

    If there's an Apple store nearby make an appointment with the genius bar to have it checked.  Be sure to sync it and back it up, as well as import your photos and videos to your computer and back up your contacts separately (such as by sync them with iCloud) in case it needs to be replaced.

  • New Document Type Created but not allowing posting under that Document type

    Hi Gurus,
    I have created new document type 'JV' & assigned number ranges to that document type. But when I started posting the entries under this document type, system has thrown one error 'NO ACCOUNTING TRANSACTION VARIANT ASSIGNED TO FB01/JV'
    Now after assigning transaction 000 (unspecified posting) & varaint 0001 to document type JV I can able to post the entry under this document type. (Classify document type for document spitting)
    But I am not still sure whether my assignment to this particular document type is correct or not?
    What is the basic criteria on the basis of which we have to select this assignment to particular document type?
    Thanks
    Sonal

    What you have defined is correct. Since you are defining the document type jv meant for any type of posting and not restriciting like payments/receipts/vendors/customers.

  • POSTING WITH A DOCUMENT TYPE WITH DIFFERENT EXCHANGE RATE TYPES

    Hi there,
    We have different company codes in the same client. These companies are situated in various countries.
    I like to use the same document type with several exchange types M and X(specific for countries). Posting in MM and SD are ok by defining a exchange rate to master records of customers and vendors. Unfortunately I could not find a way to post documents from FI using the same document type.
    Is it possible and how?
    Thank you,
    melike

    Hi,
    In accounting editing options (Transaction code FB00) - in the tab Document entry - there is an option to select the check box Exchange Rate from first line item. If this is selected, the exchange rate entered manually in the first line item will be copied in the header automatically. This could be one of the options you can consider.
    However, the hitch is it involves manual entry which could result in human errors.
    Thanks
    Murali.

  • Company code and plant should get defaulted from PO Document Type

    Dear All,
               We have three company codes 1000 ,1010 ,1020 .We have three purchase document types.NB,NB1,NB2.My requirement is if the user selects document type NB system should automatically take company 1000 and plant 1000 .Same is the requirement for other 2 documents . Is there any settings from which we can achieve company code ,plant getting defaulted according to document type ?
    Thanks & Regards
    Abhijit Das

    Dear,
    Ask your Abaper to write code in GUIXT scripts....
    There if you select particular document type then by default in PO it will popup your plant and company code.
    The above mentioned functionality we do not have in our current projetc, but related tho this we have done it by using the same scripts.
    Try def it will work.
    Regards
    Utsav

  • Confirmation Control Key Should be mandatory for PO document type

    Hi All,
    I want to know, is there any configuration settings to make mandatory "confirmation control key" for the Particular Purchasing document type's.
    If it is not there what should be the best to achieve this requirement.
    Thanks in Advance,
    Shankar.

    Hi
    I think there is no standard setting to make mandatory document "confirmation control key" for the Particular Purchasing document type's.
    Best way is to maintain in Purchasing view of vendor master record since confirmations rare sent by the vendor.If you want for some perticular materials you can maintain in Purchasing info record.
    Regards
    Ramakrishna

  • Revenue Account Determination based on Sales Order Document Type & Service Order Type

    Hi Expert,
    I have Customer Service Module with Resource Related Billing for services attached with SD.
    When DP90 runs sales document debit memo request is created & then debt memo is created.
    I need to configure Revenue Account Determination based on Sales Order Type and also based on Service Order Type.
    I did not see any field catalogue in revenue account determination for order type, For communication structure KOMKCV Header and KOMPCV Item level there is no field for sales order type nor service order type.
    Is it possible to bring in both order types? Can ABAP person do it?
    How to bring these fields?
    Is it possible & recommendd to have service order type filed AURAT for service order into this sturcture?
    Is this configuration is OK acceptable by SAP? If so is there any chnace for issues errors & wrong determination from FI CO view?
    Your valued input is highly appreciated.
    Thanks
    Prakash Parikh

    Hi Prakash,
    Yes, you can certainly add new table fields into the field catalog KOMKCV and KOMPCV and use it during account determination. You will also have to add these new fields in the user exit RV60AFZZ for it to work. I believe you will need ABAPer's help to make this work. The abaper will have to crate a ZZFIELD (ZZAUART for example) and put it in the structure and use the same in the user exit to pass the values.
    In your case, what I am not sure is, are you looking to modify the existing standard tables or creating new ones. My suggestion is to create the new condition tables with these new fields (like document type) after adding it to the field catalog. Only modify the access sequence (KOFI) in such a way that your new tables are access first before it goes into standard tables (or you can adjust it according to your scenario.
    We have done it in our company and it is working fine. Basically what we have done is to create new tables instead of modifying the standard ones. We have adjusted the access sequence in such a way that some of our custom tables are accessed first before the standard SAP tables (C001 to C005).
    I found a similar requirement on SCN. This might help.
    Adding New Field in Account Determination
    Hope this helps.
    Regards,
    Mukund S

  • In the vf03  , i should be able to see Document type and Description ,?

    When i go to VF03 i need to display not only description of Document type like " Customer Invoice" but i want to display what is the Docuement type also along with that ex "F2" . How to achieve this?

    Hi Go to customise layout ( Next to Help Icon)
    Select Options/ Selct Experts tab/ And check the field: " Show keys in all dropdown lists.

Maybe you are looking for

  • Macbook Pro need to port audio out from Firewire or Thunderbolt

    I need an additional audio out port (in addition to the headphone jack).  This needs to be analog (going to my sound system / RCA) and it appears I need adaptors that will use the Thunderbolt connector, but something that uses Firewire would be ok to

  • Reports-non moving

    sirs, do we have any transaction code to view non mooving stock items. other than mc46 and mc.9(details) i tried with sap1 code too.

  • Vendor return export

    Dear all, We are having a scenario where in the machine part is to be exported for repair. Going by the threats posted which suggests that material by material type UNBW to be created and create sub-contracting order. But in our case we require an in

  • Regarding Info Area content

    Dear Friends,          How would we know the list of transfer rules or update rules containing in one info area. Do we have any standard program or table where in we can get the list. Thanks in Advance.

  • Everything showing up black in project

    So I just installed Final Cut Studio. I opened Motion and start drawing objects and adding text and importing psd files and everything shows up black. The objects are all there but nothing showing up. Here's a screenshot: http://cl.ly/2qh0 Any help w