Selection Screen - can it be better ?

Hello Experts,
My selection screen contains about 15 selection (variables). They are shown as an flat list of input fields. Some blocks of this variables are in an relationship. In an normal ABAP selection-screen I would group it into blocks. Some variables are Yes/No variables. In an ABAP selection screen I would made check-boxes for it.
Are there some possibilities to change the standard look of selection screen in BEX/WEB: add grouping variables, use check-boxes, radio buttons ?
Thanks
Wojciech

Yes. See options in link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Similar Messages

Can you giv me a brief introduction regarding selection screen with one eg:

Hello
can you giv me a brief introduction regarding selection screen with one eg:

Hi Ranjith,
Selection Screens
Selection screens are one of the three types of screen in the R/3 System, along with dialog screens and lists. You use them whenever you want the user to enter either a single value for a field or fields, or to enter selection criteria.
Function
ABAP programs use screens to obtain input from users. The most general type of screen is a dialog screen, which you create using the ABAP Workbench tools Screen Painter and Menu Painter These tools allow you to create screens for data input and output. However, each of these screens requires its own flow logic.
Defining and Calling Selection Screens
You often use screens purely for data input . In these cases, you can use a selection screen. Selection screens provide a standardized user interface in the R/3 System. Users can enter both single values and complex selections. Input parameters are primarily used to control the program flow, while users can enter selection criteria to restrict the amount of data read from the database. You can create and save predefined sets of input values in the ABAP Editor for any selection screen. These are called variants. Texts on the selection screen are stored as language-specific selection texts in the program text elements. If you start an executable report using the SUBMIT statement, the input fields of the selection screen also serve as a data interface.
Defining and Calling Selection Screens
You define selection screens using ABAP statements in a program. Simple statements allow you to create input fields, checkboxes, and radio buttons, and design the screen layout. If you want to create a screen exclusively for data input, you do not need to create it using the normal dialog programming tools. When you create a selection screen, the system automatically assumes the tasks of the Screen Painter and Menu Painter.
The rules for calling and defining selection screens in ABAP programs depend on the program type:
·         Executable program (type 1) without logical database
You can use a single standard selection screen and as many user-defined selection screens as you wish. The standard selection screen is called automatically when you start the program. User-defined selection screens, on the other hand, are called using the CALL SELECTION-SCREEN statement in a program. The standard selection screen always has the screen number 1000. User-defined selection screens can have any screen number except 1000.
·         Executable program (type 1) with logical database
The standard selection screen for an executable program linked to a logical database is made up of the logical database selections and the program selections.
·         Module pools (type M) and function modules (type F)
You can only use user-defined selection screens in module pools and function modules. These can have any number apart from 1000. You can only call a selection screen from a function module using the CALL SELECTION-SCREEN statement. You can also define selection screens as Subscreens and incorporate them in screens or tabstrip controls.
Hope this is useful.
regards
Ram
Message was edited by:
        Ramanujan Chitrakootam

How to reset values in fileds of a selection screen?

I have a selection screen ,can you please tell me how to reset the values of the fields in selection screen.

Hi,
SELECTION-SCREEN: begin of block blk,
SELECT-OPTIONS FL_DATE FOR SBOOK_WA-FLDATE.
SELECTION-SCREEN: End of block blk,
INITIALIZATION.
REFRESH FL_DATE.
Please Note: Always search SCN before posting.
Hope it helps you,
Regards,
Abhijit G. Borkar

Need to add push botton in my selection screen

Hi
I am doing a report program . I need to add PUSH BUTTON in my selection screen can u give me any code or suggestions for this.
IF i press this push button i should get the basic list.
Regards
Rasheed.

Hi Here is a another example.
U can place a Push button on selection screen by using the satatement..
SELECTION-SCREEN PUSHBUTTON 2(10) butt USER-COMMAND cli3.
The push button will start from second character position on Selection screen and of length 10 characters !!
check this program...
TABLES sscrfields.
DATA flag(1) TYPE c.
SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE tit,
BEGIN OF LINE,
PUSHBUTTON 2(10) but1 USER-COMMAND cli1,
PUSHBUTTON 12(10) text-020 USER-COMMAND cli2,
END OF LINE,
BEGIN OF LINE,
PUSHBUTTON 2(10) but3 USER-COMMAND cli3,
PUSHBUTTON 12(10) text-040 USER-COMMAND cli4,
END OF LINE,
END OF SCREEN 500.
AT SELECTION-SCREEN.
MESSAGE i888(sabapdocu) WITH text-001 sscrfields-ucomm.
CASE sscrfields-ucomm.
WHEN 'CLI1'.
flag = '1'.
WHEN 'CLI2'.
flag = '2'.
WHEN 'CLI3'.
flag = '3'.
WHEN 'CLI4'.
flag = '4'.
ENDCASE.
START-OF-SELECTION.
TIT = 'Four Buttons'.
BUT1 = 'Button 1'.
BUT3 = 'Button 3'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
CASE FLAG.
WHEN '1'.
WRITE / 'Button 1 was clicked'.
WHEN '2'.
WRITE / 'Button 2 was clicked'.
WHEN '3'.
WRITE / 'Button 3 was clicked'.
WHEN '4'.
WRITE / 'Button 4 was clicked'.
WHEN OTHERS.
WRITE / 'No Button was clicked'.
ENDCASE.
Reward me if its helpful.
Regards
Ravi

Dynamic text in selection screen

Hi all,
I have one requirement in selection screen. I have a parameter and one pushbutton in selection screen .
To the right side of the parameter, i need to display the text based on some manipulation in a internal in the program.
If I click on the pushbutton in selection screen , manipulations will be done in the program in a internal table. if the result is ok i need to display the text in the right side of the parameter otherwise no need to display.
How can I achieve this.
Urgent
Thanks
Saravana

Hi
Write the code in the
AT selection-screen ON PARAMETER of the Button.
So when pressed on button, that code will do some process and the result will be displayed.
check it, whether it displays the text or not on selection screen.
see the doc
AT SELECTION-SCREEN - selscreen_event
Syntax
| { ON {para|selcrit} }
| { ON END OF selcrit }
| { ON BLOCK block }
| { ON RADIOBUTTON GROUP radi }
| { }
| { ON {HELP-REQUEST|VALUE-REQUEST}
|   FOR {para|selcrit-low|selcrit-high} }
| { ON EXIT-COMMAND }.
Alternatives:
1. ... OUTPUT
2. ... ON {para|selcrit}
3. ... ON END OF selcrit
4. ... ON BLOCK block
5. ... ON RADIOBUTTON GROUP radi
6. ... { }
7. ... ON {HELP-REQUEST|VALUE-REQUEST} FOR
      {para|selcrit-low|selcrit-high} }
8. ... ON EXIT-COMMAND
Effect
These additions allow individual evaluation of specific elements of the selection screens of the program. The information as to which selection has triggered the event is contained in the system field sy-dynnr.
Alternative 1
... OUTPUT
Effect
This event is triggered at the screen event PBO of a selection screen. In the event block, the selection screen can be prepared through assignments to the data objects of parameters and selection criteria and through dynamic screen modifications.
Note
The assignments to input fields in the event block AT SELECTION-SCREEN OUTPUT always affect the selection screen and overwrite the user inputs from previous displays of the same selection screen. Assignments in the event blocks LOAD-OF-PROGRAM oder INITIALIZATION, on the other hand, only have an effect at first program start.
Alternative 2
... ON {para|selcrit}
Effect
This event is triggered at the screen event PAI of a selection screen if the content of the input field of a parameter para or a line of a selection criterion selcrit was passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or an error message in the event block makes the fields para and selcrit ready for input again.
No parameter that is defined as a radio button can be specified. For this purpose, the addition ON RADIOBUTTON GROUP is provided.
Note
If a user action takes place in the dialog box for the multiple selection of a selection criterion selcrit, the entries of the selection table are passed to the program, line by line. For each line, the event AT SELECTION-SCREEN ON selcrit is triggered.
Alternative 3
... ON END OF selcrit
Effect
This event is triggered after the selection table selcrit has been fully passed to the program after a user action in the dialog box for the multiple selection has taken place. In the event block, the entire selection table can be checked.
Alternative 4
... ON BLOCK block
Effect
This event is triggered at the screen event PAI of a selection screen if all the input fields of a block block of the selection screen were passed to the ABAP program. In the event block, the user inputs can be checked. Sending a warning or an error message in the event block makes all the fields of the block block ready for input again.
Alternative 5
... ON RADIOBUTTON GROUP radi
Effect
This event is triggered at the screen event PAI of a selection screen if all the fields of a radio button group radi of the selection screen were passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or error message in the event block makes all the radion buttons of the block radi ready for input again.
Note
The individual fields of a radio button group are not passed individually and do not trigger the event AT SELECTION-SCREEN ON par.
Alternative 6
Effect
The event AT SELECTION-SCREEN itself is triggered as the last event of selection screen processing if all the input values were passed to the program. In this event block, all the user inputs can be checked. Sending a warning or an error message in the event block makes all the screen fields ready for input once again.
Alternative 7
... ON { HELP-REQUEST | VALUE-REQUEST } FOR
    {para|selcrit-low|selcrit-high} }
Effect
The two events ON HELP-REQUEST and ON VALUE-REQUEST are triggered at the screen events POH and POV of a selection screen if - for the input field of a parameter para or one of the input fields of a selection criterion selcrit - the field help F1 or the input help F4 was called. Other selection events are not triggered.
In the event blocks, a self-defined field or input field can be programmed, which overrides any helps possibly defined in the ABAP Dictionary.
Notes
These event blocks can only be implemented for fields of the selection screen that are defined in the same ABAP program and not in a possibly linked logical database.
With the events for the field and input help, no data is transported between the selection screen and the ABAP program. As with general screens, suitable function modules must be used for these. The parameters and selection criteria changed for the input help are transported to the selection screen.
Alternative 8
... ON EXIT-COMMAND
Effect
This event is triggered if the user has called one of the functions Back, Exit or Cancel. In the event block, possible clean-up actions can be executed.
Example
In these executable programs, a standard selection screen and a further selection screen are defined. In the event blocks AT SELECTION-SCREEN, the inputs in the selection screens can be specially handled using the name p_carrid and the screen number in sy-dynnr.
REPORT demo_at_selection_screen.
Global data
DATA: sflight_tab TYPE TABLE OF sflight,
      sflight_wa LIKE LINE OF sflight_tab.
Selection screens
PARAMETERS p_carrid TYPE spfli-carrid.
SELECTION-SCREEN BEGIN OF SCREEN 500.
SELECT-OPTIONS s_conn FOR sflight_wa-connid.
DATA s_conn_wa LIKE LINE OF s_conn.
SELECTION-SCREEN END OF SCREEN 500.
Handling selection screen events
AT SELECTION-SCREEN ON p_carrid.
IF p_carrid IS INITIAL.
    MESSAGE 'Please enter a value' TYPE 'E'.
ENDIF.
AUTHORITY-CHECK OBJECT 'S_CARRID'
                      ID 'CARRID' FIELD p_carrid
                      ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
    MESSAGE 'No authorization for carrier' TYPE 'E'.
ELSEIF sy-subrc <> 0.
    MESSAGE 'Error in authority check' TYPE 'A'.
ELSE.
    IF sy-ucomm = 'ONLI'.
      CALL SELECTION-SCREEN '0500'.
    ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF sy-dynnr = '0500'.
    IF s_conn IS INITIAL.
      MESSAGE 'Please enter values' TYPE 'W'.
    ELSE.
      SELECT *
             FROM sflight
             INTO TABLE sflight_tab
             WHERE carrid = p_carrid AND
                   connid IN s_conn.
      IF sy-subrc <> 0.
        MESSAGE 'No flights found' TYPE 'E'.
      ENDIF.
    ENDIF.
ENDIF.
Main program
START-OF-SELECTION.
Reward points if useful
Regards
Anji
Message was edited by:
        Anji Reddy Vangala

Multiple selection screen.

hi all,
       how to create multiple selection screens,
i need 3 selection screens how to do it?
wats the maximum number selection screen can be created in a report.
regards
Suprith

SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
PARAMETERS: p1 TYPE c LENGTH 10,
            p2 TYPE c LENGTH 10,
            p3 TYPE c LENGTH 10.
SELECTION-SCREEN END OF SCREEN 100.
SELECTION-SCREEN BEGIN OF SCREEN 200 AS SUBSCREEN.
PARAMETERS: q1 TYPE c LENGTH 10,
            q2 TYPE c LENGTH 10,
            q3 TYPE c LENGTH 10.
SELECTION-SCREEN END OF SCREEN 200.
SELECTION-SCREEN: BEGIN OF TABBED BLOCK mytab FOR 10 LINES,
                  TAB (20) button1 USER-COMMAND push1,
                  TAB (20) button2 USER-COMMAND push2,
                  END OF BLOCK mytab.
INITIALIZATION.
button1 = 'Selection Screen 1'.
button2 = 'Selection Screen 2'.
mytab-prog = sy-repid.
mytab-dynnr = 100.
mytab-activetab = 'PUSH1'.
AT SELECTION-SCREEN.
CASE sy-dynnr.
    WHEN 1000.
      CASE sy-ucomm.
        WHEN 'PUSH1'.
          mytab-dynnr = 100.
        WHEN 'PUSH2'.
          mytab-dynnr = 200.
        WHEN OTHERS.
      ENDCASE.
ENDCASE.

Setting ranges as default values for a selection screen value

i have a selection screen parameter s_yywrpc. For this s_yywrpc i have to set some range of values as default values.
Can u tell me how can i do that .
select-options:s_yywrpc for vbak-yywrpc.
for this parameter i have to set MSPG, MSP, FMP, FMPG, CFEG, FCFG, CMSG, CMSP as the default values in selection screen
can anybody tell me how can i code this
thanks
pavan

>
pavan kumar wrote:
> i have a selection screen parameter s_yywrpc. For this s_yywrpc i have to set some range of values as default values.
> Can u tell me how can i do that .
>
> select-options:s_yywrpc for vbak-yywrpc.
> for this parameter i have to set MSPG, MSP, FMP, FMPG, CFEG, FCFG, CMSG, CMSP as the default values in selection screen
>
> can anybody tell me how can i code this
>
>
> thanks
> pavan
in the intialization event.
INTIALIZATION.
s_yywrpc-low = 'MSPG'.
s_yywrpc-sign = 'I'.
s_yywrpc-option = 'EQ'.
append s_yywrpc.
s_yywrpc-low = 'MSP'.
append s_yywrpc.
do it all for the values.

How to insert a standard selection screen on moduled program?

Hi All,
Selection screen can be easily done in classic report by just simply invoking the event "SELECTION-SCREEN"
SELECTION-SCREEN BEGIN OF ...
SELECT-OPTIONS ...
PARAMETERS ...
In the case of moduled program, there will be a PBO and PAI, I have a requirement on my 2nd screen where I need to have a selection screen, but the SELECTION-SCREEN event is not applicable for NOT TYPE 1(Executable) Program.
My Dialog Program Flow:
Main Screen -> Display Screen (should be SELECTION SCREEN) -> Output (3rd screen)
What's the best alternative solution on this scenario?
Thanks.

Hi All,
I layout and detailed my question, please see my scenario below:
screen 9000
MODULE user_command_9000 INPUT.
CASE ok_code.
     WHEN 'CREATE'.
        CALL SCREEN 9001.
     WHEN 'DISPLAY'.
         "SHOULD CALL A SELECTION SCREEN HERE
         "AFTER THE SELECTION SCREEN, IS ANOTHER SCREEN FOR OUTPUT
    ENDCASE.
TOP include
SELECTION-SCREEN BEGIN OF SCREEN 9003 AS SUBSCREEN.
PARAMETERS P_PLANT TYPE T001W-WERKS.
SELECT-OPTIONS: S_MATNR    FOR MARA-MATNR,
                  S_LICHA    FOR MCHA-LICHA,
                  S_LIFNR    FOR LFA1-LIFNR.
SELECTION-SCREEN END OF SCREEN   9003.
Questions:
1. on the PAI of my main screen 9001, how can I call the SUBSCREEN I created using CALL SUBSCREEN?
    the code:
        CALL SUBSCREEN 9001 INCLUDING 'PROG_NAME' '9002',
     is not working / syntax error.
2. Should I call it like this?
    WHEN 'DISPLAY'.
       CALL SCREEN 9002.
   Screen 9002 PBO
        CALL SUBSCREEN 9001INCLUDING 'PROG_NAME' 9002',
     is not working / syntax error.
Thanks all.
Edited by: Jaime Cabanban on Dec 2, 2009 5:29 PM

Need to populate description beside its selection screen

Hi
I need to populate description of the following field beside its selection screen.
can someone guide and help..
for eg:
If i enter 1 in the selection screen. its following description shd be populated next to it
Kamlesh

I tried working on ur logic.
the error which I am getting is as follows:
Kindly help me with the error.
the name of the comment can be up to 8 character long. can u help me wht shd i put
code is below
selection-screen: begin of line,
                  comment 1(7) p_shift_desc,
                  position 33.
                position 1(8) COMMENT p_shift_desc FOR FIELD P_shtim,
                 COMMENT 13(35) p_sht_de.
parameters :      p_shtime TYPE tc37a-kaptprog OBLIGATORY. " Shift
selection-screen: comment 50(40) p_sht_desc,
                  END OF LINE.
atselection this is the code written.
tables : tc37t.
DATA : lv_shift TYPE tc37t-kaptprog.
        lv_shiftd type tc37t-ktext.
SELECT kaptprog
      UP TO 1 ROWS
    INTO lv_shift
    FROM tc37a
   WHERE kaptprog EQ p_shtime.
ENDSELECT.
IF sy-subrc NE 0.
    MESSAGE e034 WITH text-002 p_shtime text-003.
ENDIF.
IF NOT p_shtime IS INITIAL.
    SELECT SINGLE * FROM tc37t WHERE spras = sy-langu AND kaptprog =
    p_shtime.
    IF sy-subrc = 0.
      p_shift_desc = tc37t-ktext.
    ENDIF.
ENDIF.
ENDFORM.                    " validate_shift

RFDOPR10 selection screen modifications

Hi,
I am attempting to modify the transaction S_ALR_87012178. I have copied RFDOPR10 into ZRFDOPR10.
I need to modify the selection screen. The problem I am encountering is that there are only some selection-screen elements in the report. Where are the other ones coming from? IE. Customer selection through Line item selection.
The only elements that I can find in the report are Output Control and Further selections.

Option 1:
On the program attributes screen where the link to the logical database is, there is a field "Selection Screen" which for some logical databases gives you a choice of what selection screen the LDB will provide, perhaps even a blank one.
Option 2:
In some cases where a selection screen is set up by a logical database, there are options available in customizing through SPRO to control the layout of that selection screen.
The one I am familiar with is logical database PNP for HR where the resulting selection screen can be changed significantly in HR customising.
It may be that there are some similar options for the DDR selection screen - I suggest you check the relevant area of the IMG (SPRO), particularly any "Information System" customizing options.
hope this is of some assistance.
Andrew

SAP Selection Screen

Hi All,
i was trying to call the Selection Screen on the basis of the Radio button present on the initial selection screen.
can you please to let me know where i can give call to second selection screen and where to declare that selection screen.
currently i am calling my second selection screen in EVENT 'AT SELECTION-SCREEN' .
but i am getting a dump 'Dynpro does not exist'.
thnaks in advance for your help
Regards,
Himanshu Sharma

Hi,
Refer to the following code:
PARAMETERS : p_rb1 RADIOBUTTON GROUP grp1 USER-COMMAND ucom DEFAULT 'X',
             p_rb2 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS s_matnr FOR mara-matnr MODIF ID nit.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-group1 = 'NIT'.
      IF p_rb1 EQ 'X'.
        screen-active = 0.
      ELSE.
        screen-active = 1.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Regards,
Rajesh Kumar

Regarding execution of smartforms without a selection screen.

Hi ,
I would like to know whether it is possible to generate a smart form, by calling a function module in a report program without the option of selection screen.Can anyone suggest me in this regard.
Thanks in advance,
Shwetha Korlepara.

Hi,
You can do if the smartform generated does not require any input from selection screen.
Check these links.
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
Get back in case of any clarifications.Kindly reward points by clicking the star on the left of reply,if it helps.

Common SELECTION-SCREEN in reports for reuse

Dear ABAPERS,
I have a number of ABAP reports with similar but complicated customized selection screen (i.e. implemented using SELECTION-SCREEN statement). I would like to "package" the codes for SELECTION-SCREEN in a common routine in an include program, so that all my reports can just use it (instead of all reports duplicating the same selection screen codes). Any changes to the selection screen can be made through the single source.
However, an error :
Within FORM routines and function modules, the SELECTION-SCREEN statement is not allowed.
Is there any other way to accomplish this goal ? Thank you.
Regards
KC

Hello Kir,
The only way to be able to re-use a screen, selection-screen or otherwise, is when the screen is a subscreen.
Have one report program where you have got the selection screen defined as follows -
report ztest.
selection-screen begin of screen 1010 as subscreen.
parameters : test like t001-mandt.
selection-screen end of screen 1010.
Have a second program with normal screen, which has a subscreen area.
report ztest1.
data : repid type syrepid,
dynnr type sydynnr.
repid = 'ZTEST'.
dynnr = '1010'.
call screen 100.
Screen 100 has a subscreen area and its flow logic will be something like this -
PROCESS BEFORE OUTPUT.
call subscreen subscreen_area_name including repid
dynnr.
PROCESS AFTER INPUT.
call subscreen sub1.
Now, each time you make a change to the selection-screen's definition in program ZTEST, the change will always be reflected in all the other programs which are using it as their subscreen.
Regards,
Anand Mandalika.

Adding Container in the selection screen

Hi ,
I have a special requirement, I need to place a
long text editor in the selection screen. can any one explain it. this requirement is in HR report including PNP Logical database.
is it possible to add the Long text container ?
Thanks In Advance.
With Best Regards
Nag

I resloved the issue ..
Thanks
Nags

Dynamic selection screen change in Selection Screen.

Hi Experts,
I am not getting dynamic screen change on selection screen. can you give solution for the following scenario.
I have 3 radio buttons on selection screen. Example: R1, R2, R3.
I have 5 fields on selection screen. Example : F1, F2, F3, F4, F5.
When i select radio button 1 i will get F1 field screen only.
When i select radio button 2 or 3 i will get F2 and F3 fields screen only.
When i select radio button 3 i will get F4 and F5 fields screen only.
Any one give me solution for the above scenario very much thankful.
Thanks in advance,
Sai

Hi
try this code,
REPORT ZTEST_3RB.
TABLES : KNA1,EKKO,VBRK.
PARAMETERS : SALES RADIOBUTTON GROUP VIJJ USER-COMMAND VJY ,
PUR RADIOBUTTON GROUP VIJJ ,
BILL RADIOBUTTON GROUP VIJJ ,
TOTAL AS CHECKBOX.
SELECT-OPTIONS : S_CUSTNO FOR KNA1-KUNNR MODIF ID AKP DEFAULT 1000 TO 1033,
S_PONO FOR EKKO-EBELN MODIF ID VKP,
S_BNO FOR VBRK-VBELN MODIF ID PKP.
INITIALIZATION.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SALES = 'X'.
IF SCREEN-GROUP1 = 'VKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'PKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ELSEIF PUR = 'X'.
IF SCREEN-GROUP1 = 'PKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'AKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ELSEIF BILL = 'X'.
IF SCREEN-GROUP1 = 'AKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'VKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
i think this will help your problem,
Regards,
Vijay

Selection Screen - can it be better ?

Similar Messages

Maybe you are looking for