Selection-screen issue

HI All,
I have to call a F4 value request at the selection screen by choosing one of the two radio buttons in the selection screen.I know that for calling f4 value request I have to use SELECTION-SCREEN VALUE-REQUEST on <FIELD>.
but the problem is that i am not able to get the value of the radio button i.e. it is cheked or not.
<b><u>actual scenario:</u>
I have to upload a file using the function module.
I can upload the file either from pc or application server of sap.
so for pc upload i am using a function module which will open the browser, this will only happen when pc named radiobutton is checked.
but in case of application server the user have to manually enter the file path when the app radio button is clicked but in case of application server the browser should not popup.</b>

    MOVE: 'P_RPRT'   TO T_DYNFIELDTAB-FIELDNAME.
    APPEND T_DYNFIELDTAB.
    CALL FUNCTION 'DYNP_VALUES_READ'
      EXPORTING
        DYNAME                         = SY-REPID
        DYNUMB                         = SY-DYNNR
      TABLES
        DYNPFIELDS                     = T_DYNFIELDTAB
      EXCEPTIONS
        INVALID_ABAPWORKAREA           = 1
        INVALID_DYNPROFIELD            = 2
        INVALID_DYNPRONAME             = 3
        INVALID_DYNPRONUMMER           = 4
        INVALID_REQUEST                = 5
        NO_FIELDDESCRIPTION            = 6
        INVALID_PARAMETER              = 7
        UNDEFIND_ERROR                 = 8
        DOUBLE_CONVERSION              = 9
        STEPL_NOT_FOUND                = 10
        OTHERS                         = 11
    IF SY-SUBRC = 0.
      READ TABLE T_DYNFIELDTAB INDEX 1.
      IF SY-SUBRC = 0.
        MOVE T_DYNFIELDTAB-FIELDVALUE TO P_RPRT.
      ENDIF.
    ENDIF.

Similar Messages

SAP Query selection screen issues after ECC upgrade

Hi all
We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
All the fields required are available.
However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
Can anyone help identify the issue so that the issue can be resolved?
Thanks
Vinodh S

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

Variable Selection Screen Issue in WAD

Hi Guru's,
I have created a Query in 3.5 and having Variables for the same as Acutal Good's Issued Date & Plant. I am able to see the variable screen with selection option(Intervals) in Query level. But I am not able to see the Variable selection option as interval in Portal (WAD). The variable is showing only as single value.
Please suggest to get the variable selection screen as interval's.
Regards,
Bandi

Hi,
I got your point.When you open that query in Analyzer,it shows the variable screen and the variable is shown as a interval variable.But if you open the same query in Web Analyzer,the variable shown as single value variable.
This looks little weird because both Web and BEx Analyzer uses the same Query.Can you execute the query in RSRT Tcode and check how the variable shown(whether as a Single or interval variable).
And also check the variable definition.Try to create a new variable with the same settings and check the behavior.
Rgds,
Murali

Selection screen issue with hierarchy variable, due to compounding

Hello people,
I'm having this odd effect with a Hierarchy variable in the selection screen of a query, the IObject is 0PROFIT_CTR.
When I display the hierarchy values and pick up one of them, it returns ok to the sel.screen in this format: CO_AREA + "/" + ProfitCtr Value, example: "CANI/AR03". (CO_AREA is compounding of 0PROFIT_CTR).
Now, if I hit the "check" button in the selection screen, the system converts the value to an different one, by repeating twice the compounding (CO Area) value, therefore creating an incorrect value like this: "CANI/CANIAR03". Note the string after the "/" is supposed to have only the profit center value, however now has also CO Area value (repeated).
This value goes effectively to the query execution, but because this value does not exist, I get a message "SID value not found" and the effect is that the query does not get filtered by the value I picked up.
Note, the same happens if I go directly to the query execution without hitting the check button, as it seems internally the system its doing the same conversion before sending the value to the query.
I can't figure out if this is a problem of the variable, the hierarchy or the selection screen mechanism.... but I cannot find an explanation/solution.
I trust someone has already facing this!!
cheers and happy August to everyone.
Fernando

Sorry, but actually its the parent that needs tagging with "Never Share", not the level 0 member, so Alt_Entity1 and Alt_Entity2 etc, see Essbase DBA guide
understanding Implied
Sharing
The shared member property defines a shared data relationship explicitly. Some
members are shared even if you do not explicitly set them as shared. These
members are said to be implied shared members.
If you do not want a member to be shared implicitly, mark the parent as Never Share so
that the data is duplicated, and is not shared. See Understanding Shared Members for an
explanation of how shared members work.
So in the example above
Entity Dimension:
E1 (user has access)
E2
E3(user has access)
E4
Alt_Entity
Alt_Entity1 - Set to "Never Share"E1 (sharedmember)
Alt_Entity2E2 (sharedmember)
Alt_Entity3 - Set to "Never Share"E3 (sharedmember)
Alt_Entity4E4 (sharedmember
Thanks
Anthony

Infoset Query Selection Screen Issue

Dearf Experts,
I am a SAP-PM functional area. (Do know very little about technical sideof SAP)
I am working on SQ03/SQ02/SQ01 for the first time to create an Infoset query.
The output screen is incontrol and showing all the fields as per my specifications.
My problem is the Selection Screen. This is displaying to many things not desired by me.
1. Two tabs (I do not expect any tabs)
2. Many Screen areas, repeating the fields (1000,0100,0101,0102,0103)
The screen area of my specified fields in at the bottom.
My expectations about the selection screen is - just like simple one as in the case of SQVI.
Please help me in getting through this problem.
Regards
Jogeswara Rao

Gungor Ozcelebi,
Thank you very much for responding,
Exactly as you said, I am using Notifications logical database.
(I was suspecting this reason)
Infact I found about 8 fields (Perhaps related to Date fields, checkboxes etc) are automatically selected from the LDB.
My trials to delete them were invain. They reappear while saving.
I would be very thankful, if you help me in this case.
Regards...

BW-BPS Variable Selection Screen Issue

We currently use BW-BPS as our planning tool with the web-based interface. One of our planning web screens includes a cost center variable with the user selection configured as Input Field with Input Help. This allows the user to select the cost center using search parameters in a pop-up screen. I recently created a new web interface by copying the existing one and making minor changes. After generating it, the new interface works as planned, however the data in the cost center search pop-up box is garbled.
Since the original screen works fine, I theorized that the act of generating the interface caused the issue. I confirmed this by generating the original web screen without making any changes and it saw that it also has garbled pop-up search data. I then changed the setting from Input Field with Input Help to Dropdown Box and re-generated. This worked normally therefore the issue seems to specific to generating the Input Field with Input Help settings.
Are there any notes out there to correct this generation issue? We are currently on the following:
SAP_BASIS - 700 - 0025
SAP_ABA - 700 - 0025
PI_BASIS - 2006_1_700 - 0015
ST-PI - 2008_1_700 - 0004
SAP_BW - 700 - 0027
FINBASIS - 600 - 0020
SEM-BW - 600 - 0020
BI_CONT - 703 - 0016

Hi,
I got your point.When you open that query in Analyzer,it shows the variable screen and the variable is shown as a interval variable.But if you open the same query in Web Analyzer,the variable shown as single value variable.
This looks little weird because both Web and BEx Analyzer uses the same Query.Can you execute the query in RSRT Tcode and check how the variable shown(whether as a Single or interval variable).
And also check the variable definition.Try to create a new variable with the same settings and check the behavior.
Rgds,
Murali

Alv selection screen issue.

Hi,
In my requirement i want to disable the screen field based on condition.
in input screen..
posting date------------select option
period------------------paramter
if user enters posting date means want to validate period or throw error message.(not allowed to enter period) and vice versa.
am having no radio button.
LOOP AT SCREEN.
IF SCREEN-GROUP1 EQ 'ASD'.
IF mbudat IS not INITIAL.
SCREEN-INPUT = '1'.
ELSE.
SCREEN-INPUT = '0'.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
but it is not working.................Any one can suggest????/

Please don't repost the same question after having the previous rejected by a moderator.
This is relatively basic ABAP - please search and/or use help.sap.com.
<Thread locked>

Bex variable selection screen issue

Dear All,
I have three variables in my Bex report -- Submission date, User ID and Company Code. The variable -- 'Submission date' is of type 'Replacement Path'. Other two are User entry.
When I run the report, only the 'User ID' and 'Company code' variables are displayed. After I supply the values to these, 'Submision date' screen pops up. But I require that all the three variables on a single scren at a time.
Thanks,
Srinivas

Hi.....
O.k. I agree with you. But when I execute the report in Web(or in Portal), then in that case all the variables are displayed in the same screen. How is this possible ?
Thanks,
Srinivas

Issue with tabbed block in selection screen

Hi All,
I have created a report program with the following code.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
PARAMETERS: p1 TYPE c LENGTH 10.
SELECTION-SCREEN END OF SCREEN 100.
SELECTION-SCREEN BEGIN OF SCREEN 200 AS SUBSCREEN.
PARAMETERS: q1 TYPE c LENGTH 10.
SELECTION-SCREEN END OF SCREEN 200.
SELECTION-SCREEN: BEGIN OF TABBED BLOCK mytab FOR 10 LINES,
                  TAB (20) button1 USER-COMMAND push1,
                  TAB (20) button2 USER-COMMAND push2,
                  END OF BLOCK mytab.
INITIALIZATION.
button1 = 'Selection Screen 1'.
button2 = 'Selection Screen 2'.
mytab-prog = sy-repid.
mytab-dynnr = 0100.
mytab-activetab = 'PUSH1'.
AT SELECTION-SCREEN.
CASE sy-dynnr.
    WHEN 1000.
      CASE sy-ucomm.
        WHEN 'PUSH1'.
          mytab-dynnr = 100.
        WHEN 'PUSH2'.
          mytab-dynnr = 200.
      ENDCASE.
ENDCASE.
Execute the program and click on the second tab-page. Now, click on the 'Execute' button or press F8 (there is no specific functionality coded here).
The issue now is that the first tab-page is displayed, instead of the second tab remaining displayed. I require the navigation to remain within the second tab-page after the EXECUTE button is clicked.
Could someone help me out with this issue?
Regards,
Dinup
Edited by: Dinup Sudhakaran on Feb 18, 2008 1:40 PM

Hi,
Go through below document with example code.
It will help you.
Tabstrip Controls on Selection Screens
As with screens, you can now use tabstrip controls on selection screens. To do this, you must define a tabstrip area and the associated tab pages, and assign a subscreen to the tab pages. You do not have to (indeed, cannot) declare the tabstrip control or program the screen flow logic in your ABAP program, since both are automatically generated.
To define a tabstrip area with tab pages, use the following statements in your selection screen definition:
SELECTION-SCREEN: BEGIN OF TABBED BLOCK <tab_area> FOR <n> LINES,
                  TAB (<len>) <tab1> USER-COMMAND <ucom1>
                              [DEFAULT [PROGRAM <prog>] SCREEN <scrn>],
                  TAB (<len>) <tab2> USER-COMMAND <ucom2>
                              [DEFAULT [PROGRAM <prog>] SCREEN <scrn>],
                  END OF BLOCK <tab_area>.
This defines a tabstrip control <tab_area> with size <n>. The tab pages <tab1>, <tab2> are assigned to the tab area. <len> defines the width of the tab title. You must assign a function code <ucom> area to each tab title. You can find out the function code from the field SY-UCOMM in the AT SELECTION-SCREEN event.
For each tab title, the system automatically creates a character field in the ABAP program with the same name. Before the selection screen is displayed, you can assign a text to the field. This then appears as the title of the corresponding tab page on the selection screen.
You must assign a subscreen to each tab title. This will be displayed in the tab area when the user chooses that title. You can assign one of the following as a subscreen:
A subscreen screen defined using the Screen Painter.
A selection screen subscreen, defined in an ABAP program.
You can make the assignment either statically in the program or dynamically at runtime. If, at runtime, one of the tab titles has no subscreen assigned, a runtime error occurs.
Static assignment
Use the DEFAULT addition when you define the tab title. You can specify an ABAP program and one of its subscreens. If you do not specify a program, the system looks for the subscreen in the current program. When the user chooses the tab title, it is activated, and the subscreen is assigned to the tabstrip area. The static assignment is valid for the entire duration of the program, but can be overwritten dynamically before the selection screen is displayed.
Dynamic assignment
For each tab area, the system automatically creates a structure in the ABAP program with the same name. This structure has three components PROG, DYNNR, and ACTIVETAB. When you assign the subscreens statically, the structure contains the name of the ABAP program containing the subscreen, the number of the subscreen, and the name of the tab title currently active on the selection screen (and to which these values are assigned). The default active tab page is the first page. You can assign values to the fields of the structure before the selection screen is displayed, and so set a subscreen dynamically.
If you assign a normal subscreen screen to a tab title, the dialog modules containing its flow logic must be defined in the current ABAP program. If the subscreen is a selection screen, user actions will trigger the AT SELECTION-SCREEN event and its variants (see Selection Screen Processing). This includes when the user chooses a tab title. If one selection screen is included on another, AT SELECTION-SCREEN will be triggered at least twice firstly for the "included" selection screen, then for the selection screen on which it appears.
REPORT demo_sel_screen_with_tabstrip.
DATA flag(1) TYPE c.
SUBSCREEN 1
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p1(10) TYPE c,
            p2(10) TYPE c,
            p3(10) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN END OF SCREEN 100.
SUBSCREEN 2
SELECTION-SCREEN BEGIN OF SCREEN 200 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: q1(10) TYPE c OBLIGATORY,
            q2(10) TYPE c OBLIGATORY,
            q3(10) TYPE c OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF SCREEN 200.
STANDARD SELECTION SCREEN
SELECTION-SCREEN: BEGIN OF TABBED BLOCK mytab FOR 10 LINES,
                  TAB (20) button1 USER-COMMAND push1,
                  TAB (20) button2 USER-COMMAND push2,
                  TAB (20) button3 USER-COMMAND push3
                                   DEFAULT SCREEN 300,
                  END OF BLOCK mytab.
INITIALIZATION.
button1 = text-010.
button2 = text-020.
button3 = text-030.
mytab-prog = sy-repid.
mytab-dynnr = 100.
mytab-activetab = 'BUTTON1'.
AT SELECTION-SCREEN.
CASE sy-dynnr.
    WHEN 1000.
      CASE sy-ucomm.
        WHEN 'PUSH1'.
          mytab-dynnr = 100.
          mytab-activetab = 'BUTTON1'.
        WHEN 'PUSH2'.
          mytab-dynnr = 200.
          mytab-activetab = 'BUTTON2'.
      ENDCASE.
    WHEN 100.
      MESSAGE s888(sabapdocu) WITH text-040 sy-dynnr.
    WHEN 200.
      MESSAGE s888(sabapdocu) WITH text-040 sy-dynnr.
ENDCASE.
MODULE init_0100 OUTPUT.
LOOP AT SCREEN.
    IF screen-group1 = 'MOD'.
      CASE flag.
        WHEN 'X'.
          screen-input = '1'.
        WHEN ' '.
          screen-input = '0'.
      ENDCASE.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
ENDMODULE.
MODULE user_command_0100 INPUT.
MESSAGE s888(sabapdocu) WITH text-050 sy-dynnr.
CASE sy-ucomm.
    WHEN 'TOGGLE'.
      IF flag = ' '.
        flag = 'X'.
      ELSEIF flag = 'X'.
        flag = ' '.
      ENDIF.
ENDCASE.
ENDMODULE.
START-OF-SELECTION.
WRITE: / 'P1:', p1,'Q1:', q1,
         / 'P2:', p2,'Q2:', q2,
         / 'P3:', p3,'Q3:', q3.
This program defines two selection screens 100 and 200, as subscreens, and places a tabstrip control area with three tab pages on the standard selection screen. A subscreen screen 300 (from the same program) is assigned statically to the third tab page.
The layout of screen 300 is:
The input/output fields P1 to Q3 are defined by using the parameters from the ABAP program The pushbutton has the function code TOGGLE.
The screen flow logic for screen 300 is as follows:
PROCESS BEFORE OUTPUT.
MODULE init_0100.
PROCESS AFTER INPUT.
MODULE user_command_0100.
Both dialog modules are defined in the ABAP program.
When you run the program, the standard selection screen appears. In the INITIALIZATION event, the texts are defined on the tab titles, the subscreen selection screen 100 is assigned to the tab area, and the first tab title is activated.
User actions on the selection screen are processed in the AT SELECTION-SCREEN event block. In particular, it is here that the subscreens are assigned and tab titles activated when the user chooses one of the first two tab titles. This is not necessary for the third tab title, since the dynamic assignment (screen 300) is always placed in the structure MYTAB when the user chooses it.
Before the subscreen screen is displayed, the PBO module INIT_100 is executed. User actions on the subscreen screen trigger the PAI module. This includes when the user chooses a tab title. After that, the AT SELECTION-SCREEN event is triggered.
Messages in the status line show where an action has been processed.

At selection- screen output issue

Hi,
I have a issue regarding at selection-screen output event with radio buttons,
Fields are like,
Block B1
RB1
Block B2
RB2
   field 1 (Check box)
   field 2 (Check box)
User can select one radio button at a time. If the user clicks on radio button RB1 then fields under Block B2 will be disabled. If user click on RB2 field 1 and fields 2 will be input enabled. Could you please give the solution asap
Note: Radio buttons are in different selection screen blocks.

Check this code -
*SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
*PARAMETERS:
*Pi1 TYPE C RADIOBUTTON GROUP G1 DEFAULT 'X',
*Pi2 TYPE CHAR25,
*Pi3 TYPE C RADIOBUTTON GROUP G1,
*Pi4 TYPE CHAR25.
*SELECTION-SCREEN END OF BLOCK B.
*PARAMETERS check AS CHECKBOX.
*PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
*SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
*PARAMETERS: ip1(10) TYPE c,
           ip2(10) TYPE c,
           ip3(10) TYPE c.
*SELECTION-SCREEN END OF BLOCK b1.
*SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
*PARAMETERS: ip4(10) TYPE c MODIF ID bl2,
           ip5(10) TYPE c MODIF ID bl2,
           ip6(10) TYPE c MODIF ID bl2.
*SELECTION-SCREEN END OF BLOCK b2.
*AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
   IF show_all <> 'X' AND
      screen-group1 = 'BL2'.
      screen-active = '0'.
   ENDIF.
   MODIFY SCREEN.
ENDLOOP.
Regards,
Amit Khare
reward all helpful replies.

Issue with BEx selection screen

Hi Gurus,
We recently upgraded from BW 3.5 to 7.0. After the upgrade, while running the BEx queries the selection screen is not popping up and the query runs without the selections in it. Then the report errors out.... " Error Specify a value for variable XXXX".
Apparently, the query runs fine with selection when executed on WEB.
Did anyone of you come across with this issue..
Thanks
James.

Hi Guys
Run your query without the variable ,Try by removing the restrcition , if it is working fine without the variable then
I would suggest to check your variable once again like
      Check if 'Ready for input' check is checked for the respective variable,
       Remove the restriction ( drag out the variable )
      check your variable once again with all the setting and variable type
OR create a new varilable, if it is a customer exit type then check ABAP code written for populating values.
let me know if this helps,
cheers
sukhi

Issue with CALL SELECTION-SCREEN

Hi experts,
I am working on a report.
Here on the selection screen , based on the selection of some radiobuttons ,i want to call a secondary selection screen.
So i am using the following program code ,
AT SELECTION-SCREEN on BLOCk blk.
IF p_abc = c_x.
    CALL SELECTION-SCREEN 100 STARTING AT 20 5.
    IF sy-subrc <> 0.
      MESSAGE text-011 TYPE c_e .
    ENDIF.
ENDIF.
so currently , once i complete my slection on the screen 100 , the popup screen stays there and rest of the programing logic is executed correctly.
My issue is that , once i complete my slection on the screen 100, i want that the pop up should be closed
And then the the rest of the program logic should continue.
please guide me how ,this can be done.
Regards,
Rajesh Kumar.

Hi
The event AT SELECTION-SCREEN and AT SELECTION-SCREEN ON BLOCK are very similar, only the second event see the part of selection-screen defined in the block.
This events are triggered as soon as the user does something: so press ENTER, F8,........
If u want the second-selction screen is shown once and the main selection-screen has to be displayed under the second one, u can try to run the second one only if the report has to run, so if the user has pressed F8, code ONLI.
AT SELECTION-SCREEN on BLOCk blk.
CHECK SY-UCOMM = 'ONLI'.
IF p_abc = c_x.
CALL SELECTION-SCREEN 100 STARTING AT 20 5.
IF sy-subrc 0.
     MESSAGE text-011 TYPE c_e .
ENDIF.
ENDIF.
In tihs way the rest of the program will be executed, else u need to move all code of the event START-OF-SELECTION and END-OF-SELECTION in the event AT SELECTION-SCREEN, or, just as I said before, to move the calling of POPUP to event START-OF-SELECTION.
Max

Performance Issue with Selection Screen Values

Hi,
I am facing a performance issue(seems like a performance issue ) in my project.
I have a query with some RKFs and sales area in filters (single value variable which is optional).
Query is by default restricted by current month.
The Cube on which the query operates has around 400,000 records for a month.
The Cube gets loaded every three hours
When I run the query with no filters I get the output within 10~15 secs.
The issue I am facing is that, when I enter a sales area in my selection screen the query gets stuck in the data selection step. In fact we are facing the same problem if we use one or two other characteristics in our selection screen
We have aggregates/indexes etc on our cube.
Has any one faced a similar situation?
Does any one have any comments on this ?
Your help will be appreciated. Thanks

Hi A R,
Goto RSRT--> Give ur query anme --> Execute =Debug
--> No a pop up ill come with many check boxes select "Display Aggregates found" option --> now give ur
selections in variable screen > first it will give the already existing aggregate names> continue> now after displaying all the aggregates it will display the list of objects realted to cube wise> try to copy these objects into notepad> again go with ur drill downs now u'll get the already existing aggregates for this drill down-> it will display the list of objects> copy them to notepad> now sort all the objects related to one cube by deleting duplicate objects in the note pad>goto that Infocube> context>maintain aggregates> create aggregate on the objects u copied into note pad.
now try to execyte the report... it should work properly with out delays for those selections.
I hope it helps you...
Regards,
Ramki.

Issue with selection screen element on At slection scree

Hi All,
I am facing an issue with a checkbox which is present within the subscreen of a standard selection screen.
The issue is that the value of the combobox get toggled by itselfon the event mentioned below. I am unable to find out how this combo box value gets changed by itself on the screen events.I tried clear statemetns etc nothing is helping. I debugged with a watch point on this screen element and found this to happen.It just changes the value of the element to a previously held state.I m trying to clear the combobox but this event puts back the tick mark.How can I stop this.
AT SELECTION-SCREEN ON COL_FROM. "COL_FROM is another screen element diffrent from the combobox
Thanks

Hi Vighneswaran CE,
This event corresponds to the PAI module of the COL_FROM field. So, it gets executed each time you press any valid function code on the screen (unless there was an error in a previous field). Nothing abnormal here.
That's difficult to help you on that topic, you'd better tell us exactly what report it is, where you have added your code (and what code) to change the checkbox, ...
Best regards,
Sandra

If I do NOT use any event, except AT SELECTION SCREEN, Do I get any issues?

Hi Experts,
Pls. let me know that, If I do NOT use any event, except AT SELECTION SCREEN, Do I/prog. get any issues? (am also using AT SELECTION SCREEN OUTPUT for list box preperation).
For some reason(execution of the report prog. with ENTER button), am using ONLY these 2 events.
For full detials, pls. see my other thread with title,
Is it possible to execute a REPORT prog. with pressing of ENTER button?
thanq

Hi
srinivas see this program
i am executing this program with out any event it is not showing any error but not giving output
when i put start-of-selection then it is showing output
*& Report ZNNR_REPORT33
REPORT ZNNR_REPORT33 NO STANDARD PAGE HEADING MESSAGE-ID ZNNR LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
        MATNR LIKE MARA-MATNR,
        WERKS LIKE MARC-WERKS,
        PSTAT LIKE MARC-PSTAT,
        EKGRP LIKE MARC-EKGRP,
       END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
        EBELN LIKE EKKO-EBELN,
        EBELP LIKE EKPO-EBELP,
        MATNR LIKE EKPO-MATNR,
        WERKS LIKE EKPO-WERKS,
        LGORT LIKE EKPO-LGORT,
       END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X' user-command uc1.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
***********SCREEN MODIFICATIONS*******************
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
    IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
********END OF SCREEN MODIFICATIONS*****************
***************SCREEN VALIDATIONS *****************
at selection-screen.
SELECT SINGLE *
           FROM EKKO
           INTO EKKO
           WHERE EBELN IN S_EBELN.
IF SY-SUBRC <> 0.
    SET CURSOR FIELD 'S_EBELN-LOW'.
    MESSAGE E999 WITH TEXT-005.
    clear S_ebeln-low.
ENDIF.
********end of screen validation*****************
IF R1 EQ 'X'.
*ULINE AT /1(48).
    WRITE : SY-VLINE ,2 'MATERIAL NUMBER',
            21 SY-VLINE , 22 'PLANT',
            27 SY-VLINE , 28 'STATUS',
            43 SY-VLINE , 44 'GRUP', 48 SY-VLINE.
    ULINE AT /1(48).
ENDIF.
IF R2 EQ 'X'.
    WRITE : SY-VLINE , 2 'PO NUMBER',
           12 SY-VLINE, 13 'ITEM',
           18 SY-VLINE,19 'MATERIAL NUMBER',
           37 SY-VLINE, 38 'PLANT',
           44 SY-VLINE, 45 'GRUP',
           49 SY-VLINE.
    ULINE AT /1(50).
ENDIF.
start-of-selection.
*set pf-status '100'.
IF R1 EQ 'X'.
    SELECT MATNR
           WERKS
           PSTAT
           EKGRP
       FROM MARC
       INTO TABLE IT_PLANT
       WHERE WERKS = P_WERKS.
    LOOP AT IT_PLANT.
      WRITE : SY-VLINE , 2 IT_PLANT-MATNR COLOR COL_KEY,
             21 SY-VLINE , 22 IT_PLANT-WERKS COLOR COL_KEY,
             27 SY-VLINE ,28 IT_PLANT-PSTAT COLOR COL_NORMAL,
             43 SY-VLINE ,44 IT_PLANT-EKGRP COLOR COL_NORMAL.
    ENDLOOP.
ENDIF.
IF R2 EQ 'X'.
    SELECT EBELN EBELP MATNR WERKS LGORT
           FROM EKPO
           INTO TABLE IT_PONO
           WHERE EBELN IN S_EBELN.
    LOOP AT IT_PONO.
      WRITE : SY-VLINE , 2 IT_PONO-EBELN COLOR COL_KEY,
             12 SY-VLINE , 13 IT_PONO-EBELP COLOR COL_KEY,
             18 SY-VLINE , 19 IT_PONO-MATNR COLOR COL_NORMAL,
             37 SY-VLINE , 38 IT_PONO-WERKS COLOR COL_NORMAL,
             44 SY-VLINE , 45 IT_PONO-LGORT COLOR COL_NORMAL, 49 SY-VLINE..
    ENDLOOP.
ENDIF.
ULINE AT /1(50).
WRITE :/10 'PAGE NUMBER', SY-PAGNO, '/' ,SY-PAGNO.
ULINE AT /1(50).
WRITE :/10 'PAGE NUMBER', SY-PAGNO.

Selection-screen issue

Similar Messages

Maybe you are looking for