Selection texts are transported along report....
hi friends i have a doubt regarding selection texts.
i created selection texts for my report program . when i transport my report are this selection texts are transported along with my report or else do i need to do it explicitly.....
Hi Chaitanya,
When you transport you report, all the Text Elements i.e. Title and Headers, Selection Texts and Text Symbols also get transported along with your report.
You need not do explicitly.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa
Similar Messages
-
SAP Query selection texts are missing
Dear All,
I have a problem with selection texts when running a query.
There are two systems: development and test. In the dev system selection texts are displayed correctly but in the test system I got only something like:
SP$00001
SP$00002
SP$00003
SP$00004
%LAYOUT
I also transported the User group, the Infoset and the Query but this did not help.
Please, advice.
Thanks in advance and regardsJust want to add that I searched the web to find solution and the only relevant item I found was:
http://www.jt77.com/development1/programming-19276.html
However no solution found -
I want to change the selection text in the standard report/transaction .
I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction
Hi,
>
scoy123 wrote:
> I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction
Refer:-
CONSTANTS : c_comment(20) TYPE c VALUE 'write your comment'.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) c_comment.
PARAMETERS : p_matnr TYPE matnr.
SELECTION-SCREEN END OF LINE.
Hope this helps you.
Regards,
Tarun -
Selection texts while transporting
When a program is created and need to be transported to prodn , does selection texts always go with it?
It depends on how you have created a transport request. if you have created a transport request for
R3TR PROG ZXXXXXXXXXXXXX
Then it would move all the objects such as texts, screens, text elements, selection texts etc.
If you have created the transport request only as
R3TR REPS ZXXXXXXXXXXX
then it will only transport the source code and not the dependent objects. Hope it is clear.
CHeers
VJ -
Not able to transport selection texts in the program to QAS!
Hello All:
I have a query program that is created from SAP standard program and when I moved the program to QAS the program moved fine but selection texts are not moving! I created a seperate transport for those but still not able to!! Could anyone please give me any information?
Thanks.
MithunHello Mithun,
In a seperate transport add only the object type of selection text and add your selection test objects in se03->Object direct entries -> Change object direct entries.
Thanks,
Greetson -
Drop down in report for selection texts on selection screen
Hi,
I have a selection screen for a custom report on which there is a selection-option for entering text-symbol value from selection texts of the same report.
Could anybody please let me know how to put a drop-down so that users can see selection texts before entering into this free form field.
Otherwise, could anybody let me know which table stores text symbols of the report?
Regards
KasiHi,
Here is the sample code for dropdown list box in the selection-screen,
SELECT-OPTIONS: LB_MACRO_KOART MYLIST(1) 5 COMMENT.
AT SELECTION-SCREEN OUTPUT.
PERFORM ADD_VALUES_TO_KOART.
COMMENT = 'Account type'.
END-OF-SELECTION.
*& Form add_values_to_koart
text
--> p1 text
<-- p2 text
FORM ADD_VALUES_TO_KOART .
TYPE-POOLS: VRM.
DATA: MY_LIST TYPE VRM_VALUES,
VALUE LIKE LINE OF MY_LIST.
i_tab TYPE TABLE OF bseg WITH HEADER LINE.
DATA : BEGIN OF I_TAB OCCURS 0 ,
KOART TYPE C,
END OF I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'A'.
APPEND I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'D'.
APPEND I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'K'.
APPEND I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'M'.
APPEND I_TAB.
CLEAR I_TAB.
I_TAB-KOART = 'S'.
APPEND I_TAB.
CLEAR I_TAB.
Regards,
Azaz Ali. -
I have columns defined as readonly text area in a report. I have created a template so that all the reports fields have a font size of 9px. Everything sets to 9px except the fields defined as text areas. can the font size be changed on text area in reports?
Hi Brian,
you can add class="myClass"
to the HTML Form Element Attributes region of the page item.
This should allow you to apply the appropriate font-size etc.
Alternatively, you could apply them directly to the input tag in your style sheet.
input {font-size:32;}
Regards
Michael -
Selection-screen texts are not shown after transporting to QAS server...
Hello Experts,
We created a custom transaction for MB52(Display warehouse stocks) named ZMB52.
After I transported it to QAS server, the texts in the selection screen are shown
as for example, p_bukrs, etc. When I looked at its text elements, it is maintained
in German Language. My question is, should I translate it to English? And How do I
properly transport it.
Hope you can help me out here guys.Thank you and take care!Hi
Have you created your own Selection screen Text elements
or you simply copied the Std ones
If you have created on your own it should have asked for the request and should have been transported with the request
since you copied them as it is it is not displaying in ENglish language
Translate to english and see
otherwise create them in DEV with a request and transport it.
Reward points for useful Answers
Regards
Anji -
How to copy Report(including text symbols and Selection text) in Local file
Hi,
I have developed a Report in my testing system (Company dummy system) which contains lot selection text and Text symbols.
Is there any program that will copy that prohram along with all selection text and text symbold and save it on the floder and form the same program or different program i can upload program??
for example SAP has standard program <b>RSTXSCRP</b> from which i can export and import SAP Script to and from local file or system.
Please let me know at the earliest.
Regards,
PrasannaHI,
For scripts only that option is avaible in SAP.
For reports u can copy that report to another name otherwise release the request no and transport to one system to another system.
Final option is u have to save to one local file (green color icon) after that in which system, u want to upload the report means u have to create new report and upload it including selection-text itself.
Thanks,
Shankar -
Hi
Am working on a programme and i need this to be transferred to quality system.Can anybody tell me that the selection texts of this programme will be transported along with it or do i need to follow any separate procedure to transport selection texts...
thanks..if you are creating selection texts for the first time for your program it asks for the request number,
give your earlier request number that you created for your program.
if you are Transporting your program from DEV -
> Quality,program will takes selection texts.
suppose if your program already transported,now you are trying to create selecetion texts,you need to create separate TR for that and transport it seperately...
Hope it helps..... -
Adding Selection Texts to the transport request
Dear All,
1) I want to transport only "text elements" ( SE38->Text Elements) of an ABAP program. I am unable find how can I include this in a transport number. ( The other objects went safely to my quality system except this selection texts.)
Thanks for your time.
Regards,
KiranRich Heilman,
Unfortunately it did not ask me any request number.
My previous 1st transport failed in quality system and I created another request which went success to Quality system. As I thought I included all objects in the second request I directly used to transport to production. Transport was success but is is lack of texts ans selection screen texts.
Today is not very good day so far..
Gagan,
Thanks for the info. I had added manually "Report Texts". I hope this includes both "Text Symbos" and "Selection Texts".
Do you see any problem here by adding manually?
Message was edited by: Hari Kiran -
Select list with submit issue when they are referred in report region query
I have a page with a reporting region. Same region also has 3 different list items and depending on the value selected in each item, the report is refreshed. All the 3 list items are "Select list submit with submit"
Out of 3 items, 2 (say item2 and item3) are populated through dynamic LOV using the value in item1.
Additionally, when I select a default "ALL" value in in item1, I ignore values in item2 and item3.
With this background, I am a following issue:
1. I select a value other than Default value in item1 which filters the report.
2. Then I select some value in item2 which further shrinks the reports.
3. Now if I go back to item1 and select the default "All" value, the report is not refreshed with the new values of item1, item2 and item3. But it still shows the report based on value of item2 that I selected in step2.
How do I set the value of item2/item3 to null if value of item1 is default which is "All"
Any word of advise will be a great help!
Thanks,
GirishHi,
Make two computations each with the computation text NULL; or
Make one process with code like:
BEGIN
:P1_ITEM2 := NULL;
:P1_ITEM3 := NULL;
END;With the condition "Value of Item in Expression 1 = Expression 2"
Expression 1: P1_ITEM1
Expression 2: ALL
(or whatever the return value of ALL is...remember that this is case sensitive)
Mike -
Error During Activation while activating Report Selection Texts
Hi,
I've developed a report and the Transport Request for the Report has been migrated to Quality and Production Systems. Now, I have to make some more changes where I had to create another request.
Now, while activating the Selection Texts for the Report under the New Transport Request, it gives me an error message saying "Error During Activation". Could somebody tell me the reason and resolution for this error?
Thanks and Regards,
VenkatHi ,
Try activating it through se80 , as it activates the complete object .
In inactive head , with your user id see all the inactive object , may be there you can find the program , or the texts . Activate and see.
Regards,
Sureshp. -
Need to Update SELECTION TEXT and text symbols for report J_1IEWT_CERT.
Hello Experts,
My requirement is need to "Update SELECTION TEXT and text symbols for report J_1IEWT_CERT".
1. As I want to change text sysmbols for 006 to "Run in preview mode". Currently it showing "Type of output". Issue I am facing here is that whenever I deleting aur changing the same it throws an error : "Text symbol 006 is an original text and cannot b
deleted or renamed". How can I do the same.
2. Secondly I have to add two selection text also i.e. ZFATHER and PREV . And delete two selection text i.e. P_PDF and
P_SCRIPT. In this Tab there is only a Icon of deleting not an Addition button .So How can I add two more selection text.
Above are Manual Activities which is written in note 1486147. We already taken an acess key and it shows in editable mode but
not able to add/deletin/modify selection text and text symbols.
Please provide the solution as it is critical requirement.
Reagrds,
Supriya Bhatt.Hi Vishal Saxena,
Just go through the screens and do it .
[<li> Link1|http://4.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqL9rnvI/AAAAAAAAEs4/fPG7IG9yGK4/s1600-h/3-716953.JPG]
[<li> Link2|http://1.bp.blogspot.com/_O5f8iAlgdNQ/SjoVp3d9uEI/AAAAAAAAEso/ZxfkeNAiOZQ/s1600-h/1-715669.JPG]
[<li> Link3|http://2.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqIbpNpI/AAAAAAAAEsw/2ntYgX-i1Dc/s1600-h/2-716353.JPG]
Thanks
Venkat.O -
Assigning multi-language selection texts to a transport
Currently I am trying to add new languages to selection texts for custom abaps. To add the selection texts I am using the following steps:
Go into Tcode SE38.
Enter the program name, select Text Elements and click the Change button.
Go to the Selection texts tab.
In the menu, click on Goto --> "Translation"
When the popup appears, enter the translation language.
Expand the worklist until you get to the Text elements for the program.
Double click on the program line and then enter the new values.
I am able to exit at this point and the changes get saved. The problem is that by default they are saved to the $TMP development class. What is the best way to assign these to a transportable development class and then on to a transport?Check if your program is in a transport request?
Rgds,
Bhavani.
Maybe you are looking for
-
Server Process is not running in the WAS JAVA
Hi, The WAS JAVA have the resources Netweaver7.0 and java is j2sdk1.4.2_13 version Operating system is Windows2003 and database server is SQLserver2005. Previously it was running properly Now it giving the following Error. Any one of you please give
-
Hi, I am looking to run a Function Module at as a background job in a abap webdynpro application.Am using the following code to run the job by passing internal table (dynpro) to the FM . Is it possible to use the below code in ABAP Webdynpro.
-
Creation date of Purchase Document
Hi, While creation of PO, system picks current date by default but we can change the date or give back date. Can you tell me , we can fix some check where system does not accept back date PO creation. Thanks, Dharmveer
-
VIs for using UNIX pipes?
We're going to start working on an application that will eventually run on a UNIX machine, but in the meantime we'll develop on NT, which is what we're familiar with. One requirement is to communicate with another process through a UNIX pipe. Are the
-
Cube Remodelling in BI 7.0
Here is my scenario. I am working on a cube ZC_IC05 and this cube is compressed every month. Dimension 1 - 0material Dimension 2 - 0plant Dimension 3 - 0mat_plant (0mat_plant has 0plant compounding) For some reason 0mat_plant is incorrectly populated