Send Crdit Memo By Email (Tcode MR 90)
Hi,
Currently the credit memo is generated tgough MR90 for printing.
we need to send it by email. The credit memo script is a custom one. And the print program is MM70AMRA.
I cant not find any customer exit or BTE in this print program. What shall be my approach for this development?
Hi
Looks like BASIS issue.
Pls check the OSS Note - Note 787418 - Sent documents are not readable after upgrade
Pls contact your BASIS person
Regards
MD
Similar Messages
-
Trouble sending Voice memo through email.
i recorded a Voice memo at about 4 min 37 seconds and it keeps failing to send it off. I tried to reboot the phone and reload it, and send it over and over again with no luck.
Any suggestions?well all i can tell because it's an audio memo is that it is 4 min and 48 seconds long. I looked up in the iPhone guide and it says if it's too large it will alert me. It doesn't seem to have problem with size for it loads up in a email, but just keeps getting an error message while sending.
It ends up in the out box and keeps trying to send it. -
I recorded a long voice memo and can't listen to it or send it to my email. It keeps saying "preparing failed and "is being optimized for sharing at this time" help!!
Hi there,
The recording is an hour and 25 mins.
I have never been able to listen to it. When I hit play, it freezes and
doesn't play.
I get the error message when I'm trying to send to myself.
Love and Light,
Jacqueline
*“My soul is from elsewhere, I'm sure of that, and I intend to end up
there.” *
<< Personal information removed to comply with Verizon Wireless Terms of Service >> -
Auto send of PO via email once approved
hi Gurus,
We want to have an automatic sending of PO via email, once approved it is directly send to the vendor email no more t-code going to use. it is possible? what configuration we need to this set-up?
thanks,
Marina-You need to maintain e mail i.d in Vendor master.
-You need to maintain User email id in t code SU01, from which the mail need to be send.
Configuration for this.
- Go to NACE.
-Select EF and click on OUTPUT TYPES.
-Then select Output Type NEU and click on processing routines .
-In that you have to add a new entry - medium 5 - External Send
- Communication Strategy - CS01.
-Then you need to assign a program, form routine and form.
-You can use the standard program i.e. SAPFM06P, FORM routine is always ENTRY_NEU and standard MEDRUCK.
-Then in PARTNER FUNCTION you need to add a new entry : medium - 5 and function - VN .
-For subject of the mail go to Mail Title and Texts. In title give PO No. &EKKO-EBELN& .
-Under General data -> Replacement of text symbols give program as SAPMM06E and Form Routine as TEXT_SYMBOL_REPLACE.
-Now while creating a new purchase order , change the medium to External Send .
-Then go to Communication Method and select CS01.
- Need to Release the P.O in ME29N
- Go to tcode ME9F .
- Execute.
- Select the checkbox and click on Output Message.
- You will get a message MAII 00000000000001 generated .
- Use note no 191470
You can see the details in transaction code : Scot -
Vandor crdit memo, subsequent debit memo and subsequent crdit memo
Hi,
what is the difference between subsequent debit, credit and credit memo in MIRO transaction.
In case of vendor had given us credit note with relevant to particular for which we had already completed the invoice verification and payment also paid.
in this case what document should i use i.e crdit memo, subsequent credit memo or subsequent debit memo??
plz suggestHi,
Difference between Credit memo and subsequent debits/credits
Subsequent Debits/Credits are used in cases where the quantity is in the original invoice is to remain the same.
Example:
PO 10 - $10
GR 10 - $10
LIV 10 - $11 (Logistics Invoice Verification)
The vendor invoice is more than that in the Purchase Order.
In order to correct, the Vendor may send in another invoice for the Increased amount
or a credit memo for the reduce amount.
If you approve of the price increase,
post the subsequent invoice received as a Subsequent Debit Invoice.
If it is a credit memo that has been received for reducing $1 of invoice price,
then post the credit memo as Subsequent Credit.
This would retain the quantity but reduce the amount.
Subsequent Debit/Credit is for the case when the credit is not for the full amount
eg. if the Vendor decided to credit & only the $1 overcharged.
Credit memo is for the credit of the full amount and value.
Thanks
Kalyankumar -
Reg : Sending Script output to email
Hi,
I need to send script output to email.I have written the code for this functionality.
Functional guy has created output type ,but that output type is red in clor and when I click process log " it says Parameter DEVICE= is invalid "
Is there anything to be done from abap point for this error.
Actually I used these 2 fun.modules
DATA: LVF_DEVICE LIKE ITCPP-TDDEVICE.
DATA: LVS_ITCPO TYPE ITCPO,
LVF_DIALOG(1) TYPE C VALUE ' ',
LVS_RECIPIENT LIKE SWOTOBJID,
LVS_SENDER LIKE SWOTOBJID,
LVS_SNAST TYPE SNAST,
LVF_PROGRAM LIKE SY-REPID,
LVS_COMM_TYPE TYPE AD_COMM,
LVS_COMM_VALUES TYPE SZADR_COMM_VALUES.
DATA:
W_DEPT LIKE KNVK-ABTNR, "Department
W_PRSNR LIKE KNVK-PRSNR. "Person number
reset return code
RETCODE = 0.
IF NOT NAST-TCODE IS INITIAL AND NAST-NACHA EQ '5'.
SELECT SINGLE * FROM USR21 WHERE BNAME = SY-UNAME.
CALL FUNCTION 'ADDR_GET_NEXT_COMM_TYPE'
EXPORTING
strategy = nast-tcode
address_number = Kna1-adrnr
IMPORTING
comm_type = lvs_comm_type
comm_values = lvs_comm_values
TABLES
STRATEGY_TABLE =
EXCEPTIONS
address_not_exist = 1
person_not_exist = 2
no_comm_type_found = 3
internal_error = 4
parameter_error = 5
OTHERS = 6.
convert communication data
Always INT
LVS_COMM_TYPE = 'INT'.
clear LVS_COMM_VALUES-ADSMTP-SMTP_ADDR.
Get Contact persons number from KNVK
SELECT SINGLE * FROM KNVK WHERE KUNNR EQ NAST-PARNR
AND ABTNR EQ W_DEPT.
Get it from ADR6 table always
Select single * from adr6 where addrnumber = kna1-adrnr
AND PERSNUMBER = KNVK-PRSNR.
IF SY-SUBRC EQ 0 AND adr6-Smtp_addr NE ' '.
LVS_COMM_VALUES-ADSMTP-SMTP_ADDR = adr6-Smtp_addr.
ENDIF.
ENDIF.
MOVE-CORRESPONDING nast TO LVS_SNAST .
MOVE sy-repid TO LVF_PROGRAM.
CALL FUNCTION 'CONVERT_COMM_TYPE_DATA'
EXPORTING
pi_comm_type = lvs_comm_type
pi_comm_values = lvs_comm_values
pi_country = kna1-land1
pi_repid = LVF_PROGRAM
pi_snast = LVS_SNAST
IMPORTING
pe_itcpo = lvs_itcpo
pe_device = lvf_device
pe_mail_recipient = lvs_recipient
pe_mail_sender = lvs_sender
EXCEPTIONS
comm_type_not_supported = 1
recipient_creation_failed = 2
sender_creation_failed = 3
OTHERS = 4.
fill structure itcpo
ITCPO = LVS_ITCPO.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX = TOA_DARA
ARCHIVE_PARAMS = ARC_PARAMS
DEVICE = LVF_DEVICE
DIALOG = ' '
FORM = TNAPR-FONAM
LANGUAGE = NAST-SPRAS
OPTIONS = LVS_ITCPO
MAIL_SENDER = LVS_SENDER
MAIL_RECIPIENT = LVS_RECIPIENT
MAIL_APPL_OBJECT = ' '
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC NE 0.
CASE SY-SUBRC.
WHEN 7.
RETCODE = SY-SUBRC.
SYST-MSGID = 'VN'.
SYST-MSGNO = '096'.
SYST-MSGTY = 'E'.
SYST-MSGV1 = NAST-KSCHL.
SYST-MSGV2 = NAST-KAPPL.
PERFORM PROTOCOL_UPDATE.
WHEN OTHERS.
RETCODE = SY-SUBRC.
PERFORM PROTOCOL_UPDATE.
ENDCASE.
ENDIF.
and one more query is :
I want to know weather
"Are there any settings need to be done by BASIS people."
If Anyone has any idea plz reply.Hi
Use the below peace of code,I was used to send sales order confirmation script output as email.
Change History
Programmer Date Change Request Description
FKHURRAM 9/16/02 DU1K920151 Upgrade changes.
Use ADRC for Address Data
Print of an order confirmation by SAPscript
REPORT rvador01 LINE-COUNT 100 MESSAGE-ID vn.
TABLES: komk, "Communicationarea for conditions
komp, "Communicationarea for conditions
komvd, "Communicationarea for conditions
vbco3, "Communicationarea for view
vbdka, "Headerview
vbdpa, "Itemview
vbdpau, "Subitemnumbers
conf_out, "Configuration data
sadr, "Addresses
tvag, "Reason for rejection
vedka, "Servicecontract head data
vedpa, "Servicecontract position data
vedkn, "Servicecontract head notice data
vedpn, "Servicecontract pos. notice data
vbpa, "Sales Document: Partner
kna1, "General Data in Customer Master
riserls, "Serialnumbers
komser, "Serialnumbers for print
tvbur, "Sales office
tvko, "Sales organisation
adrs, "Communicationarea for Address
fpltdr. "billing schedules
INCLUDE yzrvadtabl.
*INCLUDE RVADTABL.
INCLUDE yzrvdirekt.
*INCLUDE RVDIREKT.
INCLUDE yzvedadata.
*INCLUDE VEDADATA.
DATA: retcode LIKE sy-subrc. "Returncode
DATA: repeat(1) TYPE c.
DATA: xscreen(1) TYPE c. "Output on printer or screen
DATA: BEGIN OF steu, "Controldata for output
vdkex(1) TYPE c,
vdpex(1) TYPE c,
kbkex(1) TYPE c,
kbpex(1) TYPE c,
END OF steu.
DATA: BEGIN OF tvbdpa OCCURS 0. "Internal table for items
INCLUDE STRUCTURE vbdpa.
DATA: END OF tvbdpa.
DATA: BEGIN OF tkomv OCCURS 50.
INCLUDE STRUCTURE komv.
DATA: END OF tkomv.
DATA: BEGIN OF tkomvd OCCURS 50.
INCLUDE STRUCTURE komvd.
DATA: END OF tkomvd.
DATA: BEGIN OF tvbdpau OCCURS 5.
INCLUDE STRUCTURE vbdpau.
DATA: END OF tvbdpau.
DATA: BEGIN OF tkomcon OCCURS 50.
INCLUDE STRUCTURE conf_out.
DATA: END OF tkomcon.
DATA: BEGIN OF tkomservh OCCURS 1.
INCLUDE STRUCTURE vedka.
DATA: END OF tkomservh.
DATA: BEGIN OF tkomservp OCCURS 5.
INCLUDE STRUCTURE vedpa.
DATA: END OF tkomservp.
DATA: BEGIN OF tkomservhn OCCURS 5.
INCLUDE STRUCTURE vedkn.
DATA: END OF tkomservhn.
DATA: BEGIN OF tkomservpn OCCURS 5.
INCLUDE STRUCTURE vedpn.
DATA: END OF tkomservpn.
DATA: BEGIN OF tkomser OCCURS 5.
INCLUDE STRUCTURE riserls.
DATA: END OF tkomser.
DATA: BEGIN OF tkomser_print OCCURS 5.
INCLUDE STRUCTURE komser.
DATA: END OF tkomser_print.
DATA: BEGIN OF tfpltdr OCCURS 5.
INCLUDE STRUCTURE fpltdr.
DATA: END OF tfpltdr.
DATA: pr_kappl(01) TYPE c VALUE 'V'. "Application for pricing
DATA: BEGIN OF char_val OCCURS 0,
atnam LIKE cabn-atnam,
atwrt LIKE ausp-atwrt,
END OF char_val.
FORM entry USING return_code us_screen.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing.
IF retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY
FORM PROCESSING *
FORM processing.
PERFORM get_data.
CHECK retcode = 0.
PERFORM form_open USING xscreen vbdka-land1.
CHECK retcode = 0.
PERFORM logo_selection.
PERFORM form_title_print.
CHECK retcode = 0.
PERFORM write_header_info.
PERFORM validity_print.
CHECK retcode = 0.
PERFORM header_data_print.
CHECK retcode = 0.
PERFORM header_serv_print.
CHECK retcode = 0.
PERFORM header_notice_print.
CHECK retcode = 0.
PERFORM header_inter_print.
CHECK retcode = 0.
PERFORM header_text_print.
CHECK retcode = 0.
PERFORM item_print.
CHECK retcode = 0.
PERFORM end_print.
CHECK retcode = 0.
PERFORM form_close.
CHECK retcode = 0.
*********************changes on 12/04/2007****************
TABLES: tsp01.
TYPES: BEGIN OF t_spool,
rqident TYPE tsp01-rqident,
END OF t_spool.
DATA: i_spool TYPE STANDARD TABLE OF t_spool,
wa_spool TYPE t_spool.
SELECT rqident FROM tsp01
INTO TABLE i_spool
WHERE rqowner = sy-uname.
SORT i_spool DESCENDING BY rqident.
LOOP AT i_spool INTO wa_spool.
ENDLOOP.
data: l_rqident type tsp01-rqident.
SELECT SINGLE rqident FROM tsp01 INTO l_rqident
WHERE rqowner = sy-uname.
DATA: l_spoolno LIKE tsp01-rqident VALUE '0000024884'.
TYPES: l_ty_tab_pdf TYPE tline OCCURS 0.
DATA: l_pdf TYPE l_ty_tab_pdf,
l_spool TYPE tsp01-rqident.
Type for binary attachment table.
TYPES: l_ty_tab_objbin TYPE solisti1 OCCURS 0.
DATA: l_objbin TYPE l_ty_tab_objbin.
l_spool = l_spoolno.
l_spool = l_rqident.
l_spool = wa_spool-rqident.
**/ Call the standard function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF' "#EC ARGCHECKED
EXPORTING
src_spoolid = l_spool
no_dialog = ' '
DST_DEVICE =
PDF_DESTINATION =
IMPORTING
pdf_bytecount = numbytes
pdf_spoolid = pdfspoolid
LIST_PAGECOUNT =
btc_jobname = jobname
btc_jobcount = jobcount
TABLES
pdf = l_pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
IF sy-subrc <> 0.
WRITE: / 'error', sy-subrc.
ENDIF.
**/ Convert the PDF format to the table type required for the
*attachment.
CALL FUNCTION 'QCE1_CONVERT'
TABLES
t_source_tab = l_pdf
t_target_tab = l_objbin
EXCEPTIONS
convert_not_possible = 1
OTHERS = 2.
IF sy-subrc <> 0.
WRITE: / 'error', sy-subrc.
ENDIF.
TABLES : soli.
TABLES : zpsdsalrep.
DATA: v_email TYPE soli-line.
DATA: v_email1 TYPE soli-line.
DATA: l_adrnr LIKE kna1-adrnr.
DATA: l_objky TYPE nast-objky.
DATA: l_zzterrmg TYPE zpsdsalrep-zzterrmg.
DATA: l_zsupervisor TYPE zpsdsalrep-zsupervisor.
DATA: l_kunnr TYPE kna1-kunnr.
DATA: l_kunnr1 TYPE vbak-kunnr.
SELECT SINGLE kunnr FROM vbak INTO l_kunnr1
WHERE vbeln = nast-objky.
SELECT SINGLE adrnr FROM kna1 INTO l_adrnr
WHERE kunnr = l_kunnr1.
CHECK sy-subrc IS INITIAL.
SELECT SINGLE smtp_addr FROM adr6 INTO v_email
WHERE addrnumber = l_adrnr.
SELECT SINGLE zzterrmg FROM zpsdsalrep INTO l_zzterrmg
WHERE zzsalesrep = l_kunnr1.
SELECT SINGLE zsupervisor FROM zpsdsalrep INTO l_zsupervisor
WHERE zzterrmg = l_zzterrmg.
SELECT SINGLE kunnr FROM kna1 INTO l_kunnr
WHERE sortl = l_zsupervisor.
SELECT SINGLE adrnr FROM kna1 INTO l_adrnr
WHERE kunnr = l_kunnr.
CHECK sy-subrc IS INITIAL.
SELECT SINGLE smtp_addr FROM adr6 INTO v_email1
WHERE addrnumber = l_adrnr.
DATA: l_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
DATA: l_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: l_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
DATA: l_doc_chng LIKE sodocchgi1.
DATA: l_objhead LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: l_tab_lines LIKE sy-tabix.
CONSTANTS: k_true TYPE boolean_flg VALUE 'X'.
DATA: l_mail TYPE somlreci1-receiver.
DATA: l_mail1 TYPE somlreci1-receiver.
DATA: k_mail2 TYPE somlreci1-receiver.
DATA: k_mail TYPE somlreci1-receiver.
l_mail = v_email.
l_mail1 = v_email1.
k_mail2 = text-006.
k_mail = text-007.
Creation of the document to be sent
File Name
l_doc_chng-obj_name = 'SENDFILE'.
Mail Subject
l_doc_chng-obj_descr = text-001.
Completing the recipient list
l_reclist-receiver = l_mail.
l_reclist-rec_type = 'U'.
APPEND l_reclist.
l_reclist-receiver = l_mail1.
l_reclist-rec_type = 'U'.
APPEND l_reclist.
l_reclist-receiver = k_mail.
l_reclist-rec_type = 'U'.
APPEND l_reclist.
l_reclist-receiver = k_mail2.
l_reclist-rec_type = 'U'.
APPEND l_reclist.
Mail Contents
l_objtxt = text-002.
APPEND l_objtxt.
CLEAR l_objtxt. " put in a blank line
APPEND l_objtxt.
l_objtxt = text-003.
APPEND l_objtxt.
l_objtxt = text-004 .
APPEND l_objtxt.
Calculate email size in bytes
DESCRIBE TABLE l_objtxt LINES l_tab_lines.
READ TABLE l_objtxt INDEX l_tab_lines.
l_doc_chng-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( l_objtxt ).
Creation of the entry for the compressed document
for the email text
CLEAR l_objpack-transf_bin.
l_objpack-head_start = 1.
l_objpack-head_num = 0.
l_objpack-body_start = 1.
l_objpack-body_num = l_tab_lines.
l_objpack-doc_type = 'RAW'.
APPEND l_objpack.
Creation of the document attachment
(Assume that the data in OBJBIN is in BMP format)
DESCRIBE TABLE l_objbin LINES l_tab_lines.
l_objhead = text-001 .
APPEND l_objhead.
CLEAR l_objpack.
**/ Creation of the entry for the compressed/attached document
l_objpack-transf_bin = k_true.
l_objpack-head_start = 1.
l_objpack-head_num = 1.
l_objpack-body_start = 1.
l_objpack-body_num = l_tab_lines.
l_objpack-doc_type = 'PDF'.
l_objpack-obj_name = text-005.
l_objpack-obj_descr = text-001.
l_objpack-doc_size = l_tab_lines * 255.
APPEND l_objpack. "/ .
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1' "/ .
EXPORTING
document_data = l_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = l_objpack
object_header = l_objhead
contents_bin = l_objbin
contents_txt = l_objtxt
receivers = l_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
IF sy-subrc <> 0.
WRITE: / 'unsuccessful', sy-subrc.
ELSE.
WRITE: / 'successful'.
ENDIF.
**/Take_note it is a requirement to do a commit work for the
email to go into transaction SOST.
COMMIT WORK. "/Take_note .
ENDFORM. "PROCESSING
S U B R O U T I N E S *
FORM ALTERNATIVE_ITEM *
A text is printed, if the item is an alternative item. *
FORM alternative_item.
CHECK vbdpa-grpos CN '0'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ALTERNATIVE_ITEM'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ALTERNATIVE_ITEM
FORM CHECK_REPEAT *
A text is printed, if it is a repeat print for the document. *
FORM check_repeat.
CLEAR repeat.
SELECT * INTO *nast FROM nast WHERE kappl = nast-kappl
AND objky = nast-objky
AND kschl = nast-kschl
AND spras = nast-spras
AND parnr = nast-parnr
AND parvw = nast-parvw
AND nacha BETWEEN '1' AND '4'.
CHECK *nast-vstat = '1'.
repeat = 'X'.
EXIT.
ENDSELECT.
ENDFORM. "CHECK_REPEAT
FORM DELIVERY_DATE *
If the delivery date in the item is different to the header *
date and there are no scheduled quantities, the delivery date *
is printed in the item block. *
FORM delivery_date.
IF vbdka-lfdat = space AND
vbdpa-lfdat NE space AND
vbdpa-etenr_da = space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_DELIVERY_DATE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "DELIVERY_DATE
FORM DIFFERENT_CONSIGNEE *
If the consignee in the item is different to the header con- *
signee, it is printed by this routine. *
FORM different_consignee.
CHECK vbdka-name1_we NE vbdpa-name1_we
OR vbdka-name2_we NE vbdpa-name2_we
OR vbdka-name3_we NE vbdpa-name3_we
OR vbdka-name4_we NE vbdpa-name4_we.
CHECK vbdpa-name1_we NE space
OR vbdpa-name2_we NE space
OR vbdpa-name3_we NE space
OR vbdpa-name4_we NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_CONSIGNEE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "DIFFERENT_CONSIGNEE
FORM DIFFERENT_REFERENCE_NO *
If the reference number in the item is different to the header*
reference number, it is printed by this routine. *
FORM different_reference_no.
CHECK vbdpa-vbeln_vang NE vbdka-vbeln_vang
OR vbdpa-vbtyp_vang NE vbdka-vbtyp_vang.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_REFERENCE_NO'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "DIFFERENT_REFERENCE_NO
FORM DIFFERENT_TERMS *
If the terms in the item are different to the header terms, *
they are printed by this routine. *
FORM different_terms.
DATA: us_vposn LIKE vedpa-vposn.
DATA: us_text(1) TYPE c. "Flag for Noticetext was printed
IF vbdpa-zterm NE vbdka-zterm AND
vbdpa-zterm NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_PAYMENT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
IF vbdpa-inco1 NE space.
IF vbdpa-inco1 NE vbdka-inco1 OR
vbdpa-inco2 NE vbdka-inco2.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_DELIVERY'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDIF.
Print different validity-data for the position
READ TABLE tkomservp WITH KEY vbdpa-posnr.
IF sy-subrc EQ 0.
vedpa = tkomservp.
IF vedpa-vbegdat NE space AND
vedpa-venddat NE space AND
NOT vedpa-vbegdat IS INITIAL AND
NOT vedpa-venddat IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV1'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSEIF vedpa-vbegdat NE space AND
NOT vedpa-vbegdat IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV2'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV3'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDIF.
Notice-rules for the positions.
MOVE vbdpa-posnr TO us_vposn.
CLEAR us_text.
LOOP AT tkomservpn WHERE vposn = us_vposn.
vedpn = tkomservpn.
IF us_text IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_NOTTXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
us_text = charx.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_NOTICE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDLOOP.
IF NOT us_text IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'EMPTY_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "DIFFERENT_TERMS
FORM END_PRINT *
FORM end_print.
PERFORM get_header_prices.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
PERFORM header_price_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'END_VALUES'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'SUPPLEMENT_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "END_PRINT
FORM FORM_CLOSE *
End of printing the form *
FORM form_close.
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
retcode = 1.
ENDIF.
SET COUNTRY space.
ENDFORM. "FORM_CLOSE
FORM FORM_OPEN *
Start of printing the form *
--> US_SCREEN Output on screen *
' ' = printer *
'X' = screen *
--> US_COUNTRY County for telecommunication and SET COUNTRY *
FORM form_open USING us_screen us_country.
INCLUDE yzrvadopfo.
INCLUDE RVADOPFO.
ENDFORM. "FORM_OPEN
FORM FORM_TITLE_PRINT *
Printing of the form title depending of the field VBTYP *
FORM form_title_print.
CASE vbdka-vbtyp.
WHEN 'A'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_A'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'B'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_B'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'C'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_C'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'E'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_E'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'F'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_F'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'G'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_F'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'H'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_H'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'K'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_K'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'L'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_L'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN OTHERS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_OTHERS'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDCASE.
IF repeat NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'REPEAT'
window = 'REPEAT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "FORM_TITLE_PRINT
FORM GET_DATA *
General provision of data for the form *
FORM get_data.
DATA: us_veda_vbeln LIKE veda-vbeln.
DATA: us_veda_posnr_low LIKE veda-vposn.
CALL FUNCTION 'RV_PRICE_PRINT_REFRESH'
TABLES
tkomv = tkomv.
CLEAR komk.
CLEAR komp.
vbco3-mandt = sy-mandt.
vbco3-spras = nast-spras.
vbco3-vbeln = nast-objky.
vbco3-kunde = nast-parnr.
vbco3-parvw = nast-parvw.
CALL FUNCTION 'RV_DOCUMENT_PRINT_VIEW'
EXPORTING
comwa = vbco3
IMPORTING
kopf = vbdka
TABLES
pos = tvbdpa.
Fetch servicecontract-data and notice-data for head and position.
us_veda_vbeln = vbdka-vbeln.
us_veda_posnr_low = posnr_low.
CALL FUNCTION 'SD_VEDA_GET_PRINT_DATA'
EXPORTING
i_document_number = us_veda_vbeln
i_language = sy-langu
i_posnr_low = us_veda_posnr_low
TABLES
print_data_pos = tkomservp
print_data_head = tkomservh
print_notice_pos = tkomservpn
print_notice_head = tkomservhn.
PERFORM get_controll_data.
PERFORM sender.
PERFORM check_repeat.
PERFORM tvbdpau_create.
ENDFORM. "GET_DATA
FORM GET_ITEM_BILLING_SCHEDULES *
In this routine the billing schedules are fetched from the *
database. *
FORM get_item_billing_schedules.
REFRESH tfpltdr.
CHECK NOT vbdpa-fplnr IS INITIAL.
CALL FUNCTION 'BILLING_SCHED_PRINTVIEW_READ'
EXPORTING
i_fplnr = vbdpa-fplnr
i_language = nast-spras
TABLES
zfpltdr = tfpltdr.
ENDFORM. "GET_ITEM_BILLING_SCHEDULES
*& Form ITEM_BILLING_SCHEDULES_PRINT
This routine prints the billing shedules of a salesdocument *
position. *
FORM item_billing_schedules_print.
DATA: first_line(1) TYPE c.
first_line = charx.
LOOP AT tfpltdr.
fpltdr = tfpltdr.
Output of the following printlines
IF NOT fpltdr-perio IS INITIAL.
periodische Fakturen
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERIODIC'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
bei periodischen nur eine Zeile
EXIT.
ELSEIF fpltdr-fareg CA '14'.
prozentuale Teilfakturierung
IF NOT first_line IS INITIAL.
CLEAR first_line.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERCENT_HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERCENT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ELSEIF fpltdr-fareg CA '235'.
wertmäßige Teilfakturierung
IF NOT first_line IS INITIAL.
CLEAR first_line.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_VALUE_HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_VALUE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ELSEIF fpltdr-fareg CA '3'.
Schlußrechnung
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_BILLING_SCHEDULES_PRINT
*eject
FORM GET_ITEM_CHARACTERISTICS *
In this routine the configuration data item is fetched from *
the database. *
FORM get_item_characteristics.
REFRESH tkomcon.
CHECK NOT vbdpa-cuobj IS INITIAL.
CALL FUNCTION 'CUD0_GET_CONFIGURATION' "#EC EXISTS
EXPORTING
instance = vbdpa-cuobj
language = nast-spras
TABLES
configuration = tkomcon
EXCEPTIONS
OTHERS = 4.
ENDFORM. "GET_ITEM_CHARACTERISTICS
FORM GET_ITEM_PRICES *
In this routine the price data for the item is fetched from *
the database. *
FORM get_item_prices.
CLEAR: komp,
tkomv.
IF komk-knumv NE vbdka-knumv.
CLEAR komk.
komk-mandt = sy-mandt.
komk-kalsm = vbdka-kalsm.
komk-kappl = pr_kappl.
komk-waerk = vbdka-waerk.
komk-knumv = vbdka-knumv.
komk-vbtyp = vbdka-vbtyp.
ENDIF.
komp-kposn = vbdpa-posnr.
CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
EXPORTING
comm_head_i = komk
comm_item_i = komp
language = nast-spras
IMPORTING
comm_head_e = komk
comm_item_e = komp
TABLES
tkomv = tkomv
tkomvd = tkomvd.
ENDFORM. "GET_ITEM_PRICES
FORM GET_HEADER_PRICES *
In this routine the price data for the header is fetched from *
the database. *
FORM get_header_prices.
CALL FUNCTION 'RV_PRICE_PRINT_HEAD'
EXPORTING
comm_head_i = komk
language = nast-spras
IMPORTING
comm_head_e = komk
TABLES
tkomv = tkomv
tkomvd = tkomvd.
ENDFORM. "GET_HEADER_PRICES
*& Form HEADER_DATA_PRINT
Printing of header data like terms, weights .... *
FORM header_data_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_DATA'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. " HEADER_DATA_PRINT
FORM HEADER_PRICE_PRINT *
Printout of the header prices *
FORM header_price_print.
LOOP AT tkomvd.
AT FIRST.
IF komk-supos NE 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_SUM'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'UNDER_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDAT.
komvd = tkomvd.
IF komvd-koaid = 'D'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TAX_LINE'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'SUM_LINE'.
ENDIF.
ENDLOOP.
DESCRIBE TABLE tkomvd LINES sy-tfill.
IF sy-tfill = 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'UNDER_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "HEADER_PRICE_PRINT
FORM HEADER_TEXT_PRINT *
Printout of the headertexts *
FORM header_text_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "HEADER_TEXT_PRINT
FORM ITEM_CHARACERISTICS_PRINT *
Printout of the item characteristics -> configuration *
FORM item_characteristics_print.
LOOP AT tkomcon.
conf_out = tkomcon.
IF sy-tabix = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_CONFIGURATION_HEADER'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPOR -
I am unable to listen to voice memos via Email.
When I record a voice memo (i.e. 12 seconds) and send it to my email, I am unable to listen to it, even though I have QuickTime.
- Can you listen to it on your iPod?
- Can you listen to it if you sync it to your computer?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order -
Can send but not retrieve emails using Thunderbird and Windows 8.1
Hi, I am not able to get Thunderbird to retrieve emails on a new laptop.
Last week I purchased a new laptop due to an imminent hard disk failure on my old laptop. I will call them "Old" and "New" laptops. (Old laptop is still working for the moment...)
The Old laptop is nearly 3 years old, and I have been using Thunderbird on it since new without any problems.
I have downloaded and installed Thunderbird on the New laptop, and can not get it to retrieve emails.
As the Old laptop is still working (at the moment), I am able to directly visually compare and check settings on both computers.
THE PROBLEM
Using Thunderbird on the New laptop, I am able to send emails, I can see all my old emails restored from the Old laptop using Mozbackup, but clicking Get Mail on the New laptop does not retrieve new
emails.
When I click Get Mail, the status message in the bottom left corner says "connected to .....<ISP>..." but does not actually get the emails. However, the Old laptop is still able to get emails as it always has.
My ISP is a large Australian telco that I have used for many years and I have not changed anything with my account. The ISP is POP3.
WHAT HAVE I TRIED
I deleted the email account created by restoring from Mozbackup, and attempted using the Thunderbird new account wizard, however Thunderbird did not recognise my ISP and would not create the account - even though it is working perfectly at the same time on the Old laptop.
All Firewalls I can find have been configured to allow Thunderbird, with the same configuration settings on both machines.
How do I know I can send but not Get emails from Thunderbird on the New laptop?
I have sent test emails to myself from the New laptop. Thunderbird sends successfully, I am able to preview the test emails via Mailwasher on the New laptop, and can read, reply, etc, to the emails if I log into my ISP webmail service. However I can NOT get Thunderbird to retrieve and download these emails on the New laptop. If I go to the Old laptop, Thunderbird works perfectly, retrieves and downloads all new emails, including these test emails.
I am now at the point where I do not know what else to try and would appreciate any suggestions.....
I have spent many hours over the last 3 days surfing the net, forums, Mozilla Support, etc, and tried everything suggested, without success. The only thing I have NOT tried is starting windows in Safe mode (as per some suggestions), as it is not a viable long term solution.
OTHER INFO
Computer Details;-
"Old" laptop;-
Windows 7 Home Premium - continuously updated with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed). Up to date.
MailwasherPro 2012 (subscription and licensed). Up to date.
Thunderbird 24.5.0 working perfectly. Up to date.
"New" laptop;-
Windows 8.1 - up to date with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed) - downloaded and installed. Up to date.
MailwasherPro 2012 (subscription and licensed) - downloaded and installed. Up to date.
Thunderbird 24.5.0 - downloaded and installed.
Note: I 'downloaded and installed' the Windows 8.1 version of these programs to avoid any potential compatibility problems restoring or copying from a Windows 7 backup version of the programs.
1) New laptop came with pre-installed with McAfee - which has been Uninstalled due to running Bitdefender (Windows searches for 'McAfee' return nothing found suggesting the Uninstall was successful).
2) Thunderbird has been added to both Bitdefender and Windows 8.1 firewalls on the New laptop.
3) Bitdefender and Windows security settings are identical on both laptops - as near as I can determine, I may be missing something - but have checked all settings 3 times by doing a side-by-side visual comparison.
4) Thunderbird settings are also identical and I am using the same email address and ISP that I have been using for many years.
5) I migrated Thunderbird settings, accounts and emails from the Old laptop to the New laptop using Mozbackup, then visually checked and compared all settings in Thunderbird between the two machines.
6) For info, I have used Mailwasher for many years as a simple way to preview and wash mail before running email programs such as Thunderbird - might be overkill, but I have also never had a virus or malware problem, so will keep doing this.
7) I have Uninstalled and re-installed Thunderbird on the New laptop twice, and done the same with Bitdefender once.
8) Any config changes I try on the New laptop, I either restart Thunderbird and / or restart the New laptop, or both.
9) I have not created a Windows 8.1 account and am not using SkyDrive.
10) Only other software I have installed on the New laptop is Google Chrome, Office Home 2013 and iTunes - all are working.
Thanks in advance....Well there is not much left. If telnet works then the path is clear and there is no hardware firewall blocking ports.
All that is left is software, so try windows safe mode with networking. A very handy way to eliminate software. it also actually disables most anti virus resident features and is preferred here because anti virus/security programs do not always disable or turn off when they say they have.
You might also try the McAfee removal tool. https://community.mcafee.com/thread/52788 I notice the rep said yes to both, they did not say not required.
Finally you could try creating a new profile, and see if it works just to exclude corruption of your existing profile. ( I doubt it but I am at the anything goes point)
Just as an aside, I have never had an email borne nasty and I for many years never even had an email virus scanner. So yes I think your a bit over cautious with mailwasher, if that is what your using it for. Thunderbird does not support scripting languages or flash, or most plugins in the email sandbox. The result is getting a virus from a mail in Thunderbird is really only possible, for all practical purposes, if you open that password protected zip from the young Russian woman and that is what the anti virus should be blocking anyway when the temp file is written. -
Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.
Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael -
Voice memos keeps emailing the same memo over and over.
I used voice memos just once two days ago. I created a short (30 secs) memo and emailed it to my yahoo account. The file keeps getting sent to my inbox. 20 times so far! I've deleted it from voice memo but it keeps getting sent. HOW DO I STOP IT! Anyone else had this problem? I'm with virgin mobile in Australia.
I have had this exact same problem. Over the past few days I've been e-mailed the same voice memo at least 50 times. I also have a yahoo account, maybe this has something to do with it. I even deleted the voice memo from my iPhone but it continues to be e-mailed over and over.
I don't have a solution, just wanted you to know it's happened to me too. -
Data from check boxes fails to be collected, when sending the PDF as email
Hi
I am working on an interactive PDF that should act as an ordersheet for clients to fill out. I am using Acrobat Pro 9, and everything works as intended, but when the client tries to send the order by email (By pressing a button that uses "submit a form" as actio, where it sends the whole PDF to a single email), the pdf pops up in the email client, and everything looks fine, except all of the checkboxes. None of them have been checked, even though the client have done so. I have searched the forums without luck, so now i am trying in here.
I have made sure that the client is using the version, that has the extended reader rights.
If you feel need additional information regarding the PDF, just ask.
Thank you very much for your time.Edit>Preferences>Email accounts>List of email accounts. Click the drop-down that says "add account" and select Gmail. After adding it, you can go to the account area and change it to default.
-
How to do debugging for sending inbound or outbound email via ERMS?
Hi Colleagues,
I send an email to '[email protected]' with email titile 'CIM: 318238 2013', and want to display inbound email in email assignment block within CIM Service Request 10001503 in ICX. But it fails to be displayed on Web UI. And there is no problem to browse inbound and outbound emails via t-code SCOT as below.
If I send an email to '[email protected]', there is no problem to display inbound email within one CIM Service Request in ICP as below.
One related class ZSCL_CRM_ERMS_AH_CIM_CSS=>IF_CRM_ERMS_SERVICE~EXECUTE is used to implement this function, I don't know how to do debugging when sending inbound or outbound email? Could please tell me more detailed steps?
Kind Regards
AndieHi Fabian,
Thanks for your reply.
How can I add this method ZSCL_CRM_ERMS_AH_CIM_CSS=>IF_CRM_ERMS_SERVICE~EXECUTE to the list in t-code SM50 for doing debugging?
And another question is that I cannot attach inbound email to CIM Request via ICX email address '[email protected]', but no problem to send inbound email using ICP email address [email protected] as below. Is there any authorization issue for this case?
Kind Regards
Andie -
Sending 'Dunning Letters' via Email ? - -has anyone succeeded ??
Hi
Has anyone had any joy with sending Dunning letters via email at all
We can get it to work via FAX , but get the following error when trying to send via email
'connection error on node'
even tho, there is nothing wrong with the node at all
via SCOT , we have the default conversion as 'raw text to txt' which works with everthing else
If we change to 'raw text' to 'pdf' we actually get two PDF's - one is blank however
When viewed via SOST, you cannot open it straight up, you have to open an attachment
when we queried this with SAP, they say that dunning letters are set up to open as attachments
The function module is almost identical to that used by statements and remiitances, which works absolutely fine
I have posted this on a more technical forum as it is not an FI issue, it is a technical problem, which i hope someone has come across and able to resolve for us
Many thanks
TonyHi
Have you see SAP Note 1042992 - Dunning by mail w/ SAPscript: Introductory text w/ attachmnt? Please, check the steps that this note suggests. At a release 46B I did with the enhancement F150D001 (at ECC 5.0 it is too), and you have a demo coding in include LX150F01.
I hope this helps you
Regards
Eduardo
PD: I forgot, according your coding check what is the email address for the customer, if the customer doesn't have email, then the letter goes to the SPOOL order. Check it in the include ZX* or in the BTE.
Edited by: E_Hinojosa on Mar 1, 2012 5:22 PM -
Unable to send a photo via email
I am currently trying to sending a photo via email from I-photo, I get the following message ==== The email server didn’t recognize your username/password combination.
Can anyone please advise ?????iPhoto Menu ->
Preferences ->
Accounts ->
Delete and recreate your email settings.
Alternatively, use Apple's Mail for the job. It has Templates too - and more of them. -
I need a List:
Name of sender and how many emails from that sender:
ex:
Wife - 50
Boss - 75
ESPN - 200
It would best to get them in a excel sheet so I can print, review and then make decisions to delete entire names that I know longer communicate with.See this thread here
Display number of emails by sender
Maybe you are looking for
-
Creating all binary strings with n 1's and n 0's
if i wanted to create all possible strings of n 1's and n 0's where there are never more 0's than 1's using 2 for loops and recursion how would i go about this? (the first for loop controlls how many 1's are in the string the second how many 0's up t
-
Changed Dates Are Not Being Saved
I bought a video capture device and am editing a bunch of old family films. I'm using the latest version of iMovie and am having problems with the clip dates. I can adjust the clip date in iMovie, to say 1984, but when I close iMovie and re-open it,
-
GIS Integration on Win 8 - Work manager 6.1
I understand that OpenUI API can be used to write native code ( .NET) to integrate GIS app wih Agentry app on Windows. If someone has implemented this on Windows, Please provide insights on this. I know that one can implement the GetExtensionString(S
-
i have a windows 7 pc with 2 gig ram now im trying to install adobe free download including flash and pdf reader but when i install it state can only have one instance on the computer so i downloaded the adobe uninstaller ran it it finished but still
-
Hi, I would like to change the profit center in one of the reports in KE5A. When I take out the Acutal line item reports, one of the GL shows profit center as Dummy but I would like to change it to 120. Where should I change it so that it appears in