Send different different email templates to the approver for each level

Hi,
I have implemented 4 level sequential BPEL approval flow,
And I have 4 email templates corresponsding to each approval level.
Now, how to send these different email template upon reaching to different approval level.

Good afternoon tedkord,
Welcome to the forum! I’m sure you were very excited to get your hands on the Samsung Galaxy Note 4 after its release. It is disheartening to hear that your experience with the $200 gift card trade-in promotion may have gone so awry due to some misinformation.
It is true that a 2-year agreement or installment billing agreement is required to qualify for this promotion. Our associates and agents should have all of the necessary information available to provide our customers with accurate and transparent information. It certainly seems like this may not have occurred during your interactions. I apologize if this is not what you were advised when you inquired on multiple occasions in regards to your desire to purchase the phone at full retail price.  
I am sorry if this was not the news you were hoping for when you reached out to us on the forum. I hope that in the future you will give us the opportunity to provide you with a better experience, and that this particular experience has not influenced your future shopping destination.
If you should have any questions, please let me know.
Respectfully, 
Tasha|Social Media Specialist | Best Buy® Corporate
 Private Message

Similar Messages

  • What are the privledges for each level of the support communities

    do i need to say more?

    Hi:
    That is a question I have never had before!
    I have been posting on Apple's user-to-user forums for over 10 years.  Before I began trying to help others, I received a good deal of very helpful information from other people.The time I spend varies - depending on what I am doing that day and my own interest level in reading posts (and then trying to suggest approaches to problems).  Since I retired several years ago,  I spend more time here than when I was working.  People who post here are all volunteers - this is not a job for us.
    The Level 7 is something new when Apple released the new ASC and re-defined the levels.  In the "old days," I was a L4.  As I recall, it took about five or six years to reach that level.
    Points are obtained if the original poster thinks you have helped them (or solved a problem).  The point award is completely voluntary.  In my own experience, I probably get points from every fifth or sixth post I make.  Either I do not give useful advice or the OP is unaware of the point thing - or just not interested. 
    In summary, we would not do this if we did not genuinely get satisfaction from trying to help other people.  It can be frustrating at times, but mostly more positive than negative.  When I dipped my toes in the water and began trying to use my limited knowledge of Apple computers to help others, I was tentative.  One of the positive things I have personally gotten from reading all these posts is that I have learned a great deal from others over time. 
    I got wordy...sorry for the windy answer to your question.
    Barry

  • Leave mails send to specefic email adresses on the server?

    I have several email adresses at my mail account, but for different users. I want Mail just to download my emails (send to my email adress) and leave the rest (send to other email adresses, but on same account) on the server.
    In Windows Mail I could put up a rule for the program not to download mails send to specefic email adresses from the server, but this doesnt seem to be an option in the Mail on the Mac OS. Any solution for this?

    Firefox doesn't do email, it's a web browser.
    If you are using Firefox to access web mail, you need to seek support from your service provider or a forum for that service.
    If your problem is with Thunderbird, see this forum for support.
    [http://www.mozillamessaging.com/en-US/support/]
    or this one
    [http://forums.mozillazine.org/viewforum.php?f=39]

  • Can not send mail from PR Workflow to the approver

    Dear all,
    I have issues about send mail from PR Workflow to the approver.
    Now when user create PR and the corresponding user can receive the workflow items in SBWP.
    But no email from the user to approver.
    If I assign authorization SAP_ALL to the user that create PR. The approver can recieve the workflow item PR in SBWP and email to their mail
    Can you tell me about the authorization that can allow the user to send the workflow item PR in SBWP and email to the approver?
    Now user can send mail to external and internal mail and I also configured the mail server in SCOT and can successfully send a mail to users in SO01 by manually creating a message.
    Now the approver not receive any email but can receive a workflow item in SBWP
    Regards,
    Pannee

    Dear all,
    Thank you for all suppport, Now I can solve issues.
    Regards,
    Pannee

  • How to send a group email and have the recipients hidden?

    How do I send a group email and have the recipients hidden?

    I have a new OSX 27" iMac that is running Maverick. 
    RE: group emails, I am trying to omit individual recients and have tried the following options without success.
    1) Mail- Composing- checked "Automatically- Bcc"
    2) Mail- Composing- unchecked "when sending to a group, show all member addresses"
    The result is that all names continue to show up with email addresses for group emails.
    HELP!  HELP!  HELP!
    Lynn 

  • My outlook is sending two invites in the icloud calandar. How can I stop this? I ony want the email send with my email address not the apple email

    My MS outlook on the PC is sending two invites in the icloud calandar. How can I stop this? I ony want the email send with my email address not the apple email.

    My phone is the 4.  Not the 4s. And I went there but it's nowhere the option to delete from server.
    I only see: ask before deleting and it's on. 

  • FM to read the different steps in workflow and the status at each step

    Hi All,
    Is there any FM in SAP which gives the detail roadmap of the steps taken in a workflow and the diffrent status or decision at each step.
    I am looking for something like what you see when you click on the "STARTED WORKFLOW" in the business workplace outbox.
    Which shows up the "steps in the process so far "  and the decision and the agents for each of them.
    Thanks,
    Charan.

    Hi,
      You can get the status according to the task. please check with FM "SAP_WAPI_GET_WI_DELTA".
    Regards
    SM Nizamudeen

  • Different chart for each level hierarchy in report designer

    Is there a way to display a different chart for each level of the hierarchy in a report designer? I want a different chart for each level. That is, if there are 5 nodes in level 4, I want 5 different nodes. Is there a way to do this? I tried to insert the chart inside a cell in each level, but it shows the same chart for all nodes instead of a different chart for each node.

    Has any one tried using a context sensitive chart?  According to this, it seems like this should be possible, but I am having no luck.
    http://help.sap.com/saphelp_nw70/helpdata/en/47/a99a0a5fdb0985e10000000a42189c/frameset.htm

  • How do I send a group email messages then save it for later???

    How do I send a group email messages then save it for later???is there a way that i can save couple of people for whenever want to send an email for them by clicking on my save group get access easily to specific people.
    Thankssss

    You can set up email groups in Contacts. The articles says Address Book (Contacts old name), but it still works.
    Contacts – Create Mail Group

  • How can I stop the number of unread emails showing on the icon for my main account including the number of emails in my gmail account as well?

    How can I stop the number of unread emails, displayed on the icon for my main account, including the number of unread emails in my gmail account as well? The number is accurate (unlike the many users who seem to have phantom unread emails) it's just that I want each acc to show its own total, as it did before.  I suspect I fiddled with some setting unwittingly.  It seems to do it first thing each morning, particularly.  Many thanks

    If you go to Settings>Notification Centre>Mail each of your email accounts will appear here separately. You can then change if Badges are displaye on the Mail App - which will show you the number of emails - or not.
    Regards,
    Steve

  • Automatic trigger of the information for the approval for maintenance

    Hai all,
    I am maintaining one equipment which needs the approval for the maintenance based on the hierarchy (From bottom level to   the top level). Also it is required the information about  the status of the equipment whenever it is going for approval at each level.Once the concerned person is approved at his level, the mail should trigger to the next level person sothat he would come to know the updated status of the equipment to enable further approval.
    1.Is it possible to map in PM as a sign of approval for maintenance in equipment master or by any method ?
    2.Is it possible to trigger the mail automatically once the concerned incharge approved his part ?
    Plz reply,
    Regards,
    Suresh babu.

    hi suresh,
    Plz find the mentioned user status for order approval , admin,financial approval before release....se wether it mite help you.....
    The same was posted for one of the previous thread...
    1.statno status text lowrange higer range
    1 PFA Pendi Apprv 1 3
    2 ADMA Adm apprv 2 3
    3 FINA Finan apprv 3 3
    now ur object type;- is order
    for PFA:- Select this is intial status
    for ADMA;- Select business transaction ;-release mentione forbidden button,create authorization key1 and give it here for this status
    for FINA:- Select business transaction:- releasemention allowed buttoncreate authorization key2 and give it here for this status
    2. Assign this key in authorisation profile and this is mentioned in role and for this role user is assigned.Take basis help from here
    3. Now it will work in this way ;-
    a.)when ur order is created ur intial user status is PFA,
    b.)after saving , it goes to admin dept , for admin approval,user has to change the user status manually-here system checks wether the user is authorised to perform this function via key.this user cannot release the order
    c).then order is checked financally and user status is changed manually to FINA,and once order gets this status order can be released by this useras mentioned in business transaction
    Automatic Mail is possible through work flow...
    regards
    pushpa

  • Approval for each phase in task

    Hi Everyone
    I am using task list to create Projects. I have field named - "Phases" with values of Planning, Monitoring, Executing, Closing.
    I want to have approval for each phase from approver. Need suggestions on how do I show each approval for each phase for project? Should I create different fields for each approval? I can create approval workflow so that when user change phases it will send
    out an e-mail to approver, but how user will know which approval is for which phase while looking at project item in the list.
    Your suggestions are appreciated.
    Thanks

    Hi Swetha,
    For your situation, once any phase is approved, you could send an email to notify task creator the certain phase is approved.
    If you need to let users who can access the item know the approved phases, you might add some other fields in the list. For example, add the multiple choices that has:
    Request Initiation
    Initiation approved
    Request Plan
    Planning phase approved
    Request Closure
    Closing phase approved
    And add an extra action in workflow to change the field's value per the approve status.
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Table to identify the datatarget  for each infopackage .

    Hi All,
    Is there any simplest way to identify the datatarget for each  infopacakge  instaed of  checking each infopacakge to identify the target.We have nearly 1000 infopackges loaing to different data targets.Is there any simplest way to identify which infoackge is loading which data target. like any table.
    Regards,
    Sirisha

    Hi Ashok,
    The table you have mentioned above will show only the infosource and datasource names not the data target names.please let me know if there is any other table which shows datatarget names .

  • How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

    How to let the user define the colors for each plots in the graph (I
    use LabVIEW 7)?

    Hi,
    Take a look at this example, it uses property nodes to select tha
    active plot and then changes the color of that plot.
    If you want to make the number of plots dynamic you could use a for
    loop and an array of color boxes.
    I hope this helps.
    Regards,
    Juan Carlos
    N.I.
    Attachments:
    Changing_plot_color.vi ‏38 KB

  • Get the Count for each row

    I'm trying to get the count for each row to total count for each month
    Something like this
    Hardware     |      Jan
    Monitors       |       5
    Processors   |      137
    Printers        |      57
    etc........
    How can I write a query for this. I can get the Hardware column but don't know how to get the next column.

    If you can provide more data like sample input DML statements it would have been wonderful..
    Assuming is , you need a pivot. Here is an article on basic Pivot..
    http://sqlsaga.com/sql-server/how-to-use-pivot-to-transform-rows-into-columns-in-sql-server/
    something like this may be..
    DECLARE @Input TABLE
    Hardware VARCHAR(20),
    [Date] VARCHAR(20)
    INSERT INTO @Input VALUES('Monitor', '01/01/2014'), ('CPU', '01/01/2014'), ('Monitor', '01/03/2014')
    , ('ABC', '01/01/2014'),('Monitor', '02/01/2014')
    ;WITH CTE AS
    SELECT Hardware, LEFT(DATENAME(M, [Date]),3) AS [MonthName] FROM @Input
    SELECT *
    FROM
    SELECT Hardware, [MonthName], COUNT(Hardware) AS Count FROM CTE GROUP BY Hardware, [MonthName]) a
    PIVOT (MAX([Count]) FOR [MonthName] IN ([Jan], [Feb])) pvt
    Please mark as answer, if this has helped you solve the issue.
    Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

Maybe you are looking for