Send IDOC from Business Connector to SAP faster

Hi Developer!
I need to send a very lot of IDOC converted from XML files from the Business Connector to SAP. The XML files are in different directories pro business partner, but they have a same type (ISU_MSCONS).
My problem, that the import take a lot of time. Only in every 3 seconds (IDOC creation time) gets (or works up?) the SAP one IDOC. I start diferent services pro partner at the same time to import the IDOCs, but I couldnt short the 3 second work time in the SAP. So you can count it easy, that in 1 minute I can import 20, in 1 hour 1200, in 1 day 28800 IDOCs instead of 100.000.
It is really parallel import? Have anybody any idea to make the import more faster. I know (asked the SAP Administrator) so, one BC - SAP connection (Program_ID) has more pools (= threads) in the SAP at the same time.
Thanks any help,
Charlie

Hi Satish,
You can achieve this requirement
1)If your external system going to support web service cals then send IDoc from External system as a web service, in PI use sender side SOAP and receiver side IDoc receiver channel to send IDoc.
or
2)Use proxy program ,implement the same ALE logic in PI.
or
3)Copy the Extenal IDoc message in to file folder as XML,then use file adapter to pick up this message and send it SAP using IDoc.
Regards,
raj

Similar Messages

Send IDoc from External System to SAP system

Hi Folks,
I have a requirement to send IDocs from an external system to the SAp system. Basically the external system is a subsystem which is able to send & receive idocs. The external system is currently able to send idocs to SAP system through the ALE layer but now we have to replace it by PI. Now the external system has to send teh IDocs to the SAP ECC system through the SAP PI 7.0.
Kindly let me knowq how I can achieve it.
Regards,
Santosh

Hi Satish,
You can achieve this requirement
1)If your external system going to support web service cals then send IDoc from External system as a web service, in PI use sender side SOAP and receiver side IDoc receiver channel to send IDoc.
or
2)Use proxy program ,implement the same ALE logic in PI.
or
3)Copy the Extenal IDoc message in to file folder as XML,then use file adapter to pick up this message and send it SAP using IDoc.
Regards,
raj

Idoc outbound from business connector

Hi,
I'm trying to map values to idoc from business connector(4.6). The flow is
map
transformhierarchytoflat
ale outbound process.
When I test the application, it's showing a null pointer exception . I have doubt in what all values should i give for control records ??
Shall i create a new routing rule for this ?
Any help or suggestion will be of great help .
Thanks in advance.

HI,
You are getting the Null Pointer Exception due to missing of Values in any of the context variables or the fields from mapping on target side.
Please check the data that you are passing may have any null values and whcih are not acceptable. Test the message mapping with test Tab.
The Mandatory control records, such as Sender/ receiver Ports, Partner Profiles etc, you need to pass.
Thanks
Swarup

RFC Error while trying to access function module from business connector

Hi,
I am getting the following RFc exceptions in BC server when we invoke the service pub.sap.client:invoke fail as a flow step in Idoc_Status_Add(this service is calling a function module in sap namely ZYBC_IDOC_STATUS_ADD_FROM_BC which Adds status to Idoc (from Business Connector).But no trace of failures are recorded in sap side
except 1: rfc_failure in BC trace files under monitoring.I need to know the root cause of these errors as the same services have run finely later and IDOCs were also processed successfully without any problem.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: See RFC trace file or SAP system log for more details
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1217)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3684)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3129)
at com.wm.pkg.sap.rfc.SAPSession.invoke(SAPSession.java:437)
at pub.sap.client.invoke(client.java:297)
at java.lang.reflect.Method.invoke(Native Method)
at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:496)
at wm.server.net.EmailTransaction$RunService.write(EmailTransaction.java:1375)
at wm.server.net.EmailTransaction$RunService.run(EmailTransaction.java:1218)
at com.wm.util.pool.PooledThread.run(C:/NT/Perforce/basis/4.1.0-terra/module/core/source/com/wm/util/pool/PooledThread.java:103)
at java.lang.Thread.run(Unknown Source)
could anyone throw light on how this kind of error can be resolved and why it occured?
Thanks.

What does the RFC trace file and log say? Has there been any dump on the SAP server? Check the logs and transaction st22 in your SAP system to see if the RFC-module has dumped.
My guess is the problem is in the RFC-module, I think you should start looking there.
regards,
Dionisios

Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

Hi all,
I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
2. SLD is OK: Technical System and Business System are correct for these two SAP System.
3. Integration Repository: all designed Object is OK.
4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
5. Runtime WorkBench: is OK. "Test Message" Function of "Integration Server" is OK.
In general, it is all OK.
But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
Thanks a lot for all in advance,
Best regards,
Vinh vo

Hi,
Possible checks
At R/3 side
1) Check in SMQ1 and SM58
At XI Side
1) Check in SMQ2 and IDX5
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Seshagiri

Error sending IDOC from external Java application to Sap ERP system

Hi Experts!
When I try to send Idoc from Java application to XI an error occurs : no service for system CLNTJAVA, client in Integration Server.
My question is: What value the setSenderPort() is excepting?The Java third party business system's logical name or the ERP business system's logical name where the JCO can be found?I tried both of them, but still have the problem.
Please help. I read all threads about this error, but non of those can help me.
My relevant java sourcecode:
doc.setSenderPort("CLNTJAVA");
The XI documentation says that:In the case of non-SAP senders, the entry in the SNDPOR field is interpreted as a logical system name, and the corresponding business system is searched for in the runtime cache.
Both case(third party business sytem and erp business system) I have configured the ID i think correctly. I made a business systems,I configured the adapter specific identifies,I made the IDX1 port,I made the RFC destination,I polled the IDOC type with IDX2 transaction, I have made full cache refresh,I configured the INTEGRATION_DIRECTORY_HMI rfc destination,but I do not made any communication channels, receiver determinations, receiver agreement.
My configurations if it can help for you.
Hostname:sapsp5
System name: NE2
Clients:
000 ERP
001 Integration Server
SLD configurations:
Third Party Technical system name: Java_sytem
Business System:CLNTJAVA
Logical system name: CLNTJAVA
ID configurations:
Business System:CLNTJAVA
adapter-specific identifiers:logical system:CLNTJAVA, the rest is initial,because I cant change it.
IDX1 port name: CLNTJAVA the client is 001. the rfc destination is client_001.
I think the IDX1 port and the adapter specific identifiers are wrong. is it?
my java source if the sender is the JCO
doc.setSenderPort("INTSERV");
My configurations if the sender is the JCO.
SLD configurations:
Technical system name: NE2
Business System:INTEGRATION_SERVER_NE2
Logical system name: INTSERV
ID configurations:
Business System:INTEGRATION_SERVER_NE2
adapter-specific identifiers:logical system:INTSERV,system NE2,client 001.
IDX1 port name: INTSERV the client is 001. the rfc destination is client_001.
Could this error be an autorization error?I tired to connect to the xi from the Java, with the user PIISUSER extended with PISUPER roles.
Thank very much.

Hi!
My SNDPOR already set to my source business system's logical name if you check my configurations(JAVACLNT), so there is another problem unfortunately. I set SNDPRN to JAVA, but it still does not work.
Check this configuration please(posted here:
No service for system ... in Integration Directory)
doc.setMessageType("ACC_DOCUMENT");
doc.setRecipientPort("SAPSE1"); // get stuck in XI mapping if not set
doc.setRecipientPartnerType("LS");
doc.setRecipientPartnerNumber("SE1CLNT500");
doc.setSenderPort("SAP3MA");
doc.setSenderPartnerType("LS");
doc.setSenderPartnerNumber("TREMACLNT");
doc.setClient("100");
Inside XI configuration integration builder
Business Service: Service: TREMACLNT
Under the menu Service - Adapter specific identifiers
Idoc Adapter Logical system: TAPPMAN (This thing is important when sending idoc XI -> SAP and should match the logical sys in the receiving SAP system)
IDoc Adapter and RFC adapter R/3 Sysytem ID: 3MA
Client: 100
In IDX1 trans
Port: SAP3MA (Note that the 3MA here is matched against the IDoc Adapter and RFC adapter R/3 Sysytem ID: 3MA)
(a not so well documented feature)
Client: 100
RFC Destination: SE1 (A SAP test system from where IDOC def can be imported, rfc dests are setup in SM59)
I guess that your idx1 port name is the same as the SNDPOR value. I think it should be, because the XI is whatching the IDOC traffic in the idoc adapter port, so you should send the IDOC from external system to the adapter port. Is it right?
My idx1 port is the same as my SNDPOR value in Java,but still came the error.

Issue in sending IDOC from BODS to SAP

I am getting issue while sending IDOC from BODS to SAP.
Job is getting failed with error : "No authorization to send Idoc with message type CREMAS"
I have checked last authorization in SU53 and it is Successful !!
What would be reason because of which job is getting failed with Authorization error?

Go to sm58-->Select IDOC_INBOUND_ASYNCHRONOUS this function module, in menu mar select edit--> execute LUW.
or take help from sap basis team, can you please check user in the source system have authorizations profile. 'S_BI-WX_RFC' for this u can refer sap note :150315.
if you need more information refer this document:
How to check a BW - SAP source system connection - SAP NetWeaver Business Warehouse - SCN Wiki

Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7

Hi,
I try to send idoc from SAP r/3 4.6C to PI 7. I had made ALE configuration in my sender system ( SAP 4.6C) but idocs are not sent to PI. In SM58 i have message "Name or password is incorrect (repeat logon)". Yet i'm sure that user and password are correct because if i test RFC destination using SM59 , test is OK.
Is somebody can help me ?

Hi,
In R/3 :
my RFC destination is type 3 and point to XI. The port in the partner profile point to this RFC destination. ( all seems good !).
In Xi : i created a port and i load manually idoc in idx2 to be sure that RFC destination was OK. Nothing in IDX5.
When i send idoc MATMAS using BD10 from R3 to Xi i have something very strange: first the message B1 038 "1 master IDocs set up for message type MATMAS" and just after
the XI logon screen appears !! Then message "1 communication IDoc(s) generated for message type MATMAS" and this idoc stay in SM58 with message "Name or password is incorrect (repeat logon)".
Somebody can give me requires caracteristics for XI user used in R/3 RFC destination ?

How to send IDocs from a non-SAP system to a SAP system

Hi everyone i am new to SAP R/3 System.
Currently i am required to send IDocs from a non-SAP system to a SAP R/3 System.
There is a guide on Cost-Effective and Quick Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface. But its from a SAP system to a non-SAP system and i am able to do that.
Is there any step by step guide where they teaches you how to send IDocs from a non-SAP system to SAP system via similar method?
Thank You!

Hi,
I hope this link may help you......
http://publib.boulder.ibm.com/infocenter/iisinfsv/v8r1/index.jsp?topic=/com.ibm.swg.im.iis.ds.entpak.sapr3.use.doc/topics/c_pack_r3_Introduction.html

How to send IDOC from nonSAP to SAP

Hi ;
I need to send IDOC from nonSAP to SAP. I have experience it with XI and BC..but now I need sending IDOC to SAP directl without these tools..
Can you explain it via sample? (I know already how to create port , define LP from we20,we21 ).
Firstly Do I need to create a RFC destination ? and I want to send IDOC as XML by HTML post method..Which port must I send?
Must this port point to this RFC?
Thanks.

Hi,
Here you have to generate an IDOC and convert into XML format and put at required server
third party will accept the IDOC XML not the IDOC.
Just check with ur third party in which format the data is accepted.
if its IDOC XML then u can use the file receiver adapter and place the IDOC XML file on 3rd party folder.
You use the IDoc adapter to have IDocs (intermediate documents) processed by the Integration Engine. IDocs from SAP systems Release 3.1x or higher are supported. You can also use the IDoc adapter to connect non-SAP systems to the Integration Engine.
The IDoc adapter converts the IDocs to IDoc XML format so that they can be processed by the Integration Server pipeline.
You can also transfer XML in IDoc format received from the Integration Server to connected systems. The Integration Server pipeline must convert the received XML to IDoc XML, and then transfer this IDoc XML to the IDoc adapter. The IDoc adapter converts the IDoc XML to native IDoc format and sends the IDoc to the identified receiver system using the standard IDoc interface.
Regards,
Shamma

IDoc Inbound Business Connector

Hello
I am trying to send an inbound IDoc to SAP via Business Connector. This is shortly to be replaced by XI.
The flow in Business Connector creates a routing rule which is blank because it is not finding the control information from the IDoc I believe.
I think I am missing a step in my flow.
Currently the flow is
document to record
Transform hierarchy to Flat.
Map ( mapping the fields into the IDoc)
Record to Idoc
Inbound process
The inbound process always fails because it doesnt recognise the message type, sender etc.
This is all the idoc and in record to Idoc this is an input with an output of Idoc list which is passed to the inbound process.
However Idoclist I believe doesn't seem to contain any data.
I think a step is missing can anyone help??
Thanks

Hi,
Please see this.
Hi,
BC adapter can be used when you want to communicate to a existing interface on Business Connector. If you are talking to SAP, you use RFC / IDOC adapters.
The SAP Business Connector (BC) is used in a large number of SAP production environments. SAP Business Connector will probably be gradually phased out and replaced by SAP XI technology. For the short term SAP Business connector and SAP XI will inevitably continue to coexist in companies IT landscapes.
See Below links
Integrating your SAP Business Connector with SAP XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/96ed2129-0b01-0010-2e91-c45e1fad0d03
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4f27ad80-0c01-0010-f8b8-c5e153a16ca1
Before XI
Before XI
webMethods Integration Server Vs. SAP Business Connector 4.7 (BC)
Choose the Right Adapter to integrate with SAP systems
/people/ravikumar.allampallam/blog/2005/08/14/choose-the-right-adapter-to-integrate-with-sap-systems
Thanks
akshay

Sending IDOC from R/3 to MII error

Hi,
We are trying to send IDOC from R/3 4.7 to MII 12.1 (SP8 patch 9 on NW CE 7.11).
We followed the guide below:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3861e693-0e01-0010-e791-9b44d2693e6c
Connection of message listener to R/3 works fine.
RFC connection test from R/3 to message listener was successful.
But when we try to do model distribution we get this error " - Communication error occured. Server repository could not create function template for 'MODEL_VIEW_REPLICATE'.
Maybe someone encountered this error and can help to resolve it.
Thanks in advance.

Hi Michael,
What do you mean by "manually registered the ProgID"? The message listener configuration property is as below:
ProgramID: MII_IDOC_CONNECT_5
MaxReaderThreadCount: 1
SAPClient: 800
UserName: GAOMX
Password: xxxxxxxx
Language: EN
ServerName: blade01a.memc.com
PortNumber: 00
BindingKey: XMIIIDOC
And also, following is error message found from LOG VIEWER of the MII server:
here is one
Message: not supported FunctionModule MODEL_VIEW_REPLICATE for IDocActivationSpec
Date: 2011-07-21
Time: 15:30:18:060
Category: /System/Server/Connector/Rfc
Location: com.sap.mw.jco.jra
Application: sap.com/sapjra~xMIIIDOC05
Thread: Thread[Managed_Application_Thread_20,5,Managed_Application_Thread]
Data Source: j2ee/cluster/server0/log/system/server_00.log
and another one
Message: Server repository could not create function template for 'MODEL_VIEW_REPLICATE' caused by: java.lang.RuntimeException: not supported FunctionModule MODEL_VIEW_REPLICATE used with IDocActivationSpec registered for MII_IDOC_CONNECT_5 on system blade04a_MIT_00
Date: 2011-07-21
Time: 15:30:18:061
Category: /System/Server/Connector/Rfc
Location: com.sap.conn.jco
Application: sap.com/sapjra~xMIIIDOC05
Thread: Thread[Managed_Application_Thread_20,5,Managed_Application_Thread]
Data Source: j2ee/cluster/server0/log/system/server_00.log
Thanks,
Mike

Business Connector to SAP XI migration

Hi Experts,
1)Customer is using Business connector with R/3 46C .
2) Now R/3 4.6C will be Upgraded to ECC6
3) We need to first find out if the BC will work with ECC6 or not. If not we will need to give them the Approach for BC to XI Migration.
if XI has to be used what will happend to the interfaces running in BC ...is their any way that we can use that in XI and work....
or ...we need to do developmet from the scrach...
Thanks
Rupesh

Hi,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
http://www.sap-hefte.de/download/dateien/917/052_lesesprobe.pdf
Business connector --
WAS - Business Connector
business connector documentation
SAP Business Connector
Business connector
Will Business Connector 4.6 be affected by new Daylight savings changes
Business connector
More info on XI can be found at https://service.sap.com/xi
and webAS on http://help.sap.com/saphelp_nw04/helpdata/en/f3/e20f3adfd0a706e10000000a114084/frameset.htm
Check this also-
http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
http://www.yellow2b.com/Yellow2B-Content_C-Content_full_1112108163571.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
Thanks,
Satya Kumar

Sending IDoc from R/3 to XI -ongoing

Hi,
With reference to my previous errors while sending IDoc to XI from R/3 system. I have resolved errors with help of Seshagiri and Kummari advise and help. But now I am getting new kind of error, while sending IDoc from R/3 its getting passed from R/3, but while checking it in XI throug SXMB_MONI I am getting below error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_POCreateIdoc_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_POCreateIdoc_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can any one advise me on this?
Thanks & Regards
Manish

Hi,
There were so many Mapping Objects under different Namespaces and under that different Message Mapping trees.
Under one tree I have tested the XML message and found the below error:
Cannot produce target element /ns0:MT_POFile/POItem/Price. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd Cannot produce target element /ns0:MT_POFile/POItem/Price. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
Kindly check if this is the correct error I am getting related to SXMB_MONI error message.
Regards,
Manish

EDI file to IDOC using Business connector 4.6

Hi Gurus,
We have a requirement of converting the EDI file to IDOC using Business connector 4.6 (943 & 944 ) one Inbound and other is outbound ..
Can any one of you share the document on developing the scensrio ... we have searched couldnt get the same.
Thanks in advance .
Ramamurthy

Hi Raj,
Thanks for the reply , Yes currently we also having the project using PI as rightly said we are using the seeburger and then converting the EDI format to XML and then mapped in IR to the IDOC .
also using Item field conversion we developed some projects , similarly we have developed using modules too .
Since the Business connector is new to us we didnt able to catch hold on where to import the Java program that we write in the Business connector ... from Jothi reply understood the server side configuration.
In case of BC where is that we need to implement the java code if you can share some thing on this would be good .
Could you please share on how to transform and then implement the code in the BC ....
Thanks,
Ramamurthy

Send IDOC from Business Connector to SAP faster

Similar Messages

Maybe you are looking for