Send one message to two receivers simultanously

Hi,gurus:
I wanna know how can we send one message to two receivers simultanously.
Our scenario is file to file,and we add two receivers in receiver determinations,and leave the conditions empty.
But it seems the message was only sent to one receivers.
Any ideas?

Hi...
You should be able to send same file to two different receivers. For that you need to create :
1. Two communication channels for two receivers
2. Add two receivers in the Receiver Determination ( under Configure Receivers)
3. Two interface determination for two receivers
4. Two receiver Agreements having two different receiver CC.
5. Only one sender agreement.
If you have created all the above objects, you should be able to send a file to two receivers.
Thanks,
Pooja

Similar Messages

Send the same message to two receivers with some time difference..

Hi
I want to send the same message to Two receivers with the slight time difference.. becuase but not at the same time.. if the same time means.. just we can specify the two receivers in the one receiver determination..
but if i want to send the same message to Two reveivers with the time difference means..(after sending the message to first receiver.. after some time gap.. i need to send the message to second receiver..
this type of scenarios how can we do.. is it possible to do with out BPM... please suggest me the solution..
Thanks
Jain .P

Hi Jain,
With BPM you can easily do it.
i am giving you the steps:
1)first add a receive strep to get your message
2)then, put a receiver determination step with a multiline receiver container element assigned to its Receivers property.
3)then, put a block in dynamic mode(ie. ForEach/ParForEach mode) and assign the multiline receiver container element to its multiline element and assign a simple(single line) receiver container element to its current line property.
4) add a send step within the block, choose Receivers List in its Receiver From property and choose the current line receiver element in its Receivers property.
5) then add a wait step in the BPM, in its type select Wait Specified Time Period and then mention the duration in your desired time unit.
**Reward points if helpful...
--Sankar Choudhury

One Sender system (sync) and two receivers system(Sync) . Pls help

Hello All,
For one Sender system (sync) and two receivers system(Sync)
as I am using BPM for it.
CRM sender system (RFC)
DM (RFC) and ERP Receiver systems (RFC)
Pls let me know
In Receive there is only two mode
1. Async
2. Open S/A bridge
So do i need to choose Async mode for sender RFC.
Pls tell me the BPM flow steps for my scenario
Regards

Use Open S/A bridge
The scenario could be done wihtout bpm. Ur requirement is not clear but here could be the steps. Steps.
Receive
Sync send
Sync send
Async send
Regards,
Prateek

When I am sending one message, mac mail shows sending several (6 last time), is it virus?

when I am sending one message, mac mail shows sending several (6 last time), is it virus?
mac mail also freezes from time to time and closes for no reason

It is not a virus. It's a bug in Mail that fails to reset that count, so it keeps incrementing each time you send a message. When it says it's sending 6 messages, that really just means you're sending the 6th message since you last opened Mail.

Splitting one message into two files

Hi all,
I have a case where I have to generate two files for a single incoming message.The scenario is as follows-
I have the following structure as target -
- Structure 1 with some fields in it
- Structure 2 with some fields in it
I have done the mapping of the target with the source.
Now what I require is a separate file for structure 1 and another file for structure 2
Thanks,
Sandeep

You need to use BPM for this.
First create a message mapping with one source and two targets.
To add more message types to a mess map, go to the Messages tab (there are 3 tabs: Design, Test, Messages ).
Then you need one transformation and two send steps in the BPM.
regards
SKM

Cfmail spool sending one message at a time

I have mx7 standard installed on win 2003 server
a cfmail page sends files to the spool corectly.
The spool is only sending out one message every 60 seconds or
so. Changing the spool interval has no effect.
these need to go out a lot faster than this.
the mail.log is showing this but i'm not sure it's the
problem.
Aug 4, 2006 11:19 AM Error 0
Exception reading response; nested exception is:
java.net.SocketTimeoutException: Read timed out
Aug 4, 2006 11:18 AM Error 0
Exception reading response; nested exception is:
java.net.SocketTimeoutException: Read timed out
Aug 4, 2006 11:17 AM Error 0
Exception reading response; nested exception is:
java.net.SocketTimeoutException: Read timed out
Aug 4, 2006 11:16 AM Error 0
Exception reading response; nested exception is:
java.net.SocketTimeoutException: Read timed out
Aug 4, 2006 11:15 AM Error 0
Exception reading response; nested exception is:
java.net.SocketTimeoutException: Read timed out
thanks for any help in advance.

I would suggest playing with the other mail specific
settings, such as #of mail delivery threads, but my guess is you've
already messed with these.
Perhaps it has nothing to do with CF, but rather a bottleneck
with the process that is creating the emails. How many emails are
you trying to send?
Is it a query driven mail tag?
Another aspect to check would be the version of JRUN being
used by CF. You might find an update to a newer version of JRUN
would solve the problem.
Given the errors you've listed (SocketTimeout), they seem to
be JAVA specific.
In any case, good luck!
bh

TS3276 Hi. Just started using Mac Mail on a macbookpro v10.6.8. I tried to send a message with two excel (for mac) files attached. One attached as a file, one inserted all the text into the message body. Help?

Just started using my Mac Mail program instead of web mail. When I went to attach two pdf files, one attached as a file, the other inserted all the text into the body of the email message. How do I get it to attach both pdf's as files?

I think you're confusing two different things. If you attached PDF files and one of them displayed the PDF icon in the message window, that means it was more than one page. If you saw what appeared to be the actual document for the other PDF file, that means it's only one page and it's normal for it to display that way.
However, I seem to recall there may (or should) be a button at the bottom-right of the message window that allows you to display those files as icons, even if they're one page. If not, there's a third-party addition you can use to add that feature:
http://lokiware.info/Attachment-Tamer

Send a message to multiple receivers from the same service

Hi all,
I registered on SAP community several months ago, I found many good hints and solutions to some of the problems encountered in XI and for which I thank you, but this is the first time I address a question to a common issue, written already about.
I have a scenario with 1 File FTP sender adapter and 2 Receiver adapters:1 FTP adapter and 1 MAIL adapter. The input message is sent to one of these receiver adapters based on the value taken by a specific field from the input message.The receiver adapters are using the same party and service.
The requirement is to solve this without using BPM.
I have read "multiple receiver" issue related blogs and tried to use the standard receiver determination. Thus, I have 1 Sender Agreement, 2 Receiver agreements (one for FTP and one for MAIL), 1 Interface Determinations (with the 2 inbound interfaces and interface mappings corresponding to FTP and MAIL output) and 1 standard Receiver Determination where I added the party and service twice and specified for both the condition. The condition is based on XPath, is correct.
In sxmb_moni, I get the error: "No receiver could be determined". If I remove one of the conditions, then the output is sent on both receiver adapters, instead of only the one that fulfills the condition.
Can you please give me some feedback on how to solve this problem? It is rather urgent.
I have also tried to create 2 Interface Determinations and have 2 Receiver Determinations, each one with the right condition. But I get the same error message.
Is the problem due to the fact that I don't use 2 different services ?
If you know how this can be solved without using BPM, please reply.
Thanks a lot,
Alina hudea

> In sxmb_moni, I get the error: "No receiver could be determined". If I remove one of the conditions, then the output is sent on both receiver adapters, instead of only the one that fulfills the condition.
Hi,
I think the problem in Receive Determination. As you mentioned when you remove one of the condition then it works..
What I concluded is, I think while creating your Receiver Determination for multiple receivers you added the receivers by pressing the plus sign and that means you are using mulitiple receivers with "AND" condition, so in this condition when both the condition will be true then only you will get success.
What you can do is, Just remove one of the receivers and then add it by pressing the "OR" symbol i.e. by pressing this ( [ ] ) symbol and put your conditions as you like.
I hope what I have concluded is correct..
Regards,
Sarvesh

Bpm steps To Combine 2 scenarios to send one message first

Hi All,
We have two scenarios (Both are JDBC --> Idoc scenarios, one is to create Pick Confirmation Idoc and another one is to create Goods Movement Idoc) working fine most of the times. But sometimes Pick Confirmation Idocs getting created first instead of Goods Movement Idocs., even though we are controlling which to pick up first from the JDBC poll interval.
If we want to combine these both scenarios in to BPM and send Good Movements first, what would be the steps in BPM?
Or is there any other way to send/create Goods Movement Idoc first even when both are polled same time from the Data base?
Thx
N@v!n

Hi Navin,
You can collect both the JDBC messages using this Collect & merge Pattern provided by SAP . In this process you can check the correct sequence of activities and can place required wait steps in the process of IDOC process.
Please see the link below -
http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/frameset.htm

How can a servlet send a message to two open browsers?

Hi,
I've a servlet which opens a JSP page in browser A.
This browser opens up second browser B, which gets data from the servlet.
When browser B submits a message back to the servlet I have to click on browser A to update it.
What I want is for the JSP page in browser B to submit a message to the servlet which will automatically update browser A.
Any ideas?
Thanks

But, if you have 10 browsers connecting to the same
Web Server, how does it know which response goes to
which browser?
Is there something in the HTTP header which tells it
which browser to go to?No, there's something in the TCP/IP connection which tells it where the response goes. And if you thought the answer to this question was going to tell you how to send responses to browsers that didn't send requests, it isn't. Because you can't.

Sending external video to two displays simultaneously

I'm trying to split the DVI-I output on a Macbook Pro to two devices - a Dell display (DVI) and an LCD TV (VGA). I've got an appropriate video splitter (http://www.xpcgear.com/dviisplitter.html) but am finding that OS X is too smart for it's own good - it autodetects one of the displays but ignores the other!
Is there any way to force OS X to simply output the video signal w/o autodetecting the display type?

You are posting in the Late 2008/2009 MBP forum - you may want to report this in the Original MBP Display forum, since the new (unibody) MBPs don't have a DVI output (and their output is digital only).

Sending a single message to two systems in an order

Hi all
I have a scenario where i need to send a message to two different systems,the messge is to be sent to the second system only after the first message has been completely prcocessed sucessfully.
Need an approach to acheive the above requirement.
Thanks all
Manohar.

Manohar,
There could be another way..
Use the option .. Operating System Command after Message processing. If your XI System is installed in Unix servers i believe it would be easy to send mail. If in windows search in google for softwares. I cant remember any names right now..
Search if sdn/google about more on the above option.
Or you can use BPM. In send step select Acknowledgement(Transport). So once the ack is received the process would move to the next Send Step(Send Mail).
Regards,
Sumit

How to send the same message to two SMTP servers

hi,
I need to send a message to two different SMTP servers.
I want to avoid the creation of new MimeMessage with a new Session.
the only way I've found was to keep a reference to the Properties instance that was used in the Session creation, and modify its "mail.smtp.host" property.
Is there another way? I must be missing something.
thanks,
ofer

hi,
I've already found the solution, so I'll post it here.
first I'll explain the purpose:
I needed to send the same message to a normal email server, and (for some of the recipients) to a special SMTP server that is on a different machine.
the following code demonstrate the solution.
thanks for your help.
ofer
----------code---------------
public class MultipleSendTest {
private final static Session server1 = createSession("somesmtp_server.com");
private final static Session _server2 = createSession("another_smtp_server.com");
public static void main(String args[]) throws Exception {
//create the message
MimeMessage m = new MimeMessage(_server1);
m.setText("body text");
m.addRecipients(Message.RecipientType.TO, "[email protected]");
m.setFrom(new InternetAddress("[email protected]"));
//send
send(m, _server1);
send(m, _server2);
private static void send(MimeMessage message, Session session) {
//for logging only
String host = session.getProperty("mail.smtp.host");
try {
Transport transport = session.getTransport("smtp");
transport.connect();
transport.sendMessage(message, message.getAllRecipients());
System.out.println("sent to " + host);
transport.close();
} catch (MessagingException e) {
System.out.println("failed to send to " + host);
private static Session createSession(String host) {
Properties properties = new Properties();
properties.setProperty("mail.smtp.host", host);
return Session.getInstance(properties);
----------code---------------

Send same data to two systems

I tried several ways but failed. And I'm very confused, Is somebody tell me the correct way?
send the same message to two receivers.
So there is one Receiver determination, what about interface determination?
Shoud I use different message interfaces and mapping for two receivers?
Thanks very much.

if you want to send same data to two systems this is how it will be
1 outbound interface
2 inbound interface (this is for more clarity. The interfaces will use the same message type)
1 Message mapping
2 interface mapping
1 Receiver determination
2 interface determination
1 sender agreement
2 receiver agreement
This is just 1 design out of the many But i guess the above sud be clear enough.

Brand new LG G2 and unable to send picture messages?

i was able to send picture messages until two days ago. Now I am unable too. Is there anything I can do to be able to send pictures again?

I was told by a service tech that this is a known problem with the LG G2. It apparently was caused by a google update and they aren't correcting it till September, by apparently doing another update.. I am on my 2nd LG G2 phone. My 1st one worked for3 months and started not sending pics or receiving pics with messages. The 2nd one worked for 3 days before it started doing the same thing. I did everything they told me to do plus a hard reset which I did several times and only works for 3 days. And who wants to reset their phone every 3 days. My phone also will only let me open a few emails before I get a "failed" "server not responding", try again later. Have no idea if that is connected with the pic text messages or not, but it is annoying. If google can not get the issue corrected then I understand they will issue new phones. I really don't understand how everything is connected and if someone can explain it further I'd like to hear. Hope this helps.

Send one message to two receivers simultanously

Similar Messages

Maybe you are looking for