Send Step BPM Error

Hi,
I got a permanent error in BPE in the send step of loop 4.
I am unable to trace what the error is as i cant see anything in the container nor any mapping error in the trace column also.
Let me know where else i need to check for this.
All i have is the following in the message column.
Message ID 0044E1B8004400320039003700380039 alread y exists in called system (pipeline CENTRAL)
Regards
Krish
Edited by: Krish on Apr 28, 2011 9:43 AM

Hi,
Check the end condition of the loop is valid.
-Supriya.

Similar Messages

Synchronous Send step showing errors in process designer

Hi All,
I have few questions in using a synchronous send step in
BPM.
Can I use a synchronous send step without opening Sync/async bridge.
When is the sync/async bridge opened?
Scenario:
File async --> XI (receive async) --> sync send step to J2ee application (HTTP post) --> async response send to File
Sync Abstract Interface:
Input:
Message type (same as outbound)
Response:
Message type (same as Http response)
When I use the synchronous step, I see errors in the process designer saying
Message to be sent and synchronous interface are not of the same type. This happens for both request and response message.
Please help me.
Regards,
Meher

I think the Problem is with the INTERFACE Determination.
You need a BPM for the above scenario, but not a Sync/Asynch Brindge
In BPM
Step 1 : Receive from File 1
Step 2 : Do Transformation from File1 format to J2EE Request Format
Step 3 : Send a Synchronous send Step to J2EE
Step 4 : Transform the HTTP response to your File2 Format Response
Step 5 : Send the Response to File2
Interface Determination
File1 to j2ee Request
J2ee Request/Response To J2EE Request/Response
J2ee Response to file 2
Please check your Interface determination very closely.

BPM handle empty message in send step

Hi, Friends:
I have a following BPM sceario(PI7.1 EHP1)
It mainly has following steps:
Receive -> Transformation (Multi-Mapping) -> Fork (4 branches: one send step each branch)
The multi-mapping result is to generate 4 types of messages based on logic.
Sometimes all 4 types of message generated, and sometimes only one type of message generated.
When there is a message not generated, the send step generate error which is not caught in exception branch.
I searched forum, so far not lucky to find solution.
Any idea how to handle empty message (do not send it) in send step?
Regards
Liang
Edited by: Liang Ji on Dec 7, 2010 8:42 PM

Hi, Abhishek:
The reason to use Fork is that all the branches can be reached.
By using switch, it only judge one input value and only one condition turns true.
Actually in most cases, the number of my input value is more than one, saying two or more message types generated.
And this is not multi-line situaion, because the messages generated are different types.
Your reply remind me to add switch inside fork.
Regards
Liang
Edited by: Liang Ji on Dec 8, 2010 5:32 PM

Error Handling in BPM - Send Step

Hello,
I would like to implement the following two error handlers using BPM:
1. There is a send step which sends a message to an HTTP receiver. If the HTTP server is down I would like to add 3 retries and just in case after the third retry fails there should be an error Email sent. So I am wondering whether a communication error (which happens in the HTTP receiver communication channel) is delivered back to the process engine so that it can be handled using BPM.
2. I also need to apply a validation using XML schema. So if validation fails the error should also be returned to the process engine so that it can be handled in the integration process.
Are those two requirement possible as described (returning communication and validation errors)? Or do I have to follow another approach?
Thank you very much!

Hi Florian,
>>2. When I activate transport acknowledgement and there is an error in XML validation outbound channel request I get an system error acknowledgement back however the error branch is NOT taken either!
Correct send step using transport acknowledgment will check whether the message was transmitted or not
Check this link http://help.sap.com/saphelp_nw04s/helpdata/EN/43/65ce41ae343e2be10000000a1553f6/content.htm
>>3. And NOW it gets interesting: When I simulate step 2 again an cancel the error message afterwards then the error branch is taken! Not very useful in my opinion if error messages have to be canceled first. The error branch seems to be pretty useless for me in case of asynchronous send steps.
Again when you cancelled the message it was not received successfully by the receiver system and hence it raised exception (as mentioned in the Exception of send step.)
I will suggest you to try using Application Acknowledgment in send step. Also If you provide the steps of BPM then it will be more helpful.
Also have a look at this :
Asynchronous send step can raise exception only when
1. Thrown when a permanent system error occurs:
a. In the case of an asynchronous send step, the exception will only be triggered if an error occurs during the transfer to the pipeline. Errors that occur during mapping in the pipeline, do not trigger an exception.
b . In the case of a synchronous send step, the exception is also triggered by permanent system errors that occur in the pipeline or while transporting the message to or from the pipeline.
Regards
Suraj
Edited by: S.R.Suraj on Sep 8, 2009 6:41 AM

File BPM Webservice IDOC .........Error in BPM workflow(Sync send step)

Hi all,
I have the same type scenario that is file initiates the bpm that invokes the Webservice.the file data goes into bpm as the input data of the webservice and webservice gives the response and then the web-service response is mapped to
idoc and finally posted to R/3.
The interface sI created:
1.outbound Async -
>for file
2. Abstract async----
>bpm reciever step.
3.Abstract sync----
>bpm sync send step.
4.inbound sync -
>for the webservice to recieve the reqst and to send the response to Abstract sync
5.Abstract async----
>to send the data out of BPM
6.inbound async----
for idoc
created 3 communication channel.
1.file adapter: sender
2.SOAP adapter: Recv
3.IDOC adapter: Recv
created 3 reciever determination
Business process instance in ID
reciever agreement(2)
interface determaination
But getting a problem in BPM.
I think the scenario is logically correct as I have seen previous
SDN suggestions.
But getting the problem in BPM's sync step.and the SOAP rec channel is also inactive.in BPM workflow I can see the recv step is getting file req data but after that in the sync send step
its stuck up.getting error.
Please sir suggest me.

Remove the interface you created for Idoc that is inbound async one. use the imported Idoc itself as the interface and also as the message type. Everything else looks good though i did not really evaluate ur ID configuration..
VJ

BPM error at send step

hi experts,
In a simple File to File using BPM Scenario, messages are processed up to send step (only 2 steps are there recv and send). The receive side is okay. i can monitor the messages that are being picked up in the monitor. In adapter both sender and receiver adapters are showing green.
How to trouble shoot inside BPM errors; i tried SXMB_MONI -> selected PE from the message -> chose graphical description, where it shows red and an error in the send step.
the SXMB_MONI shows error in outbound message side. and the pipeline stops at Call Adapter.
thanks in advance,
nikhil
Happy 2008

hi Farooq!!
Others are working.
see, this is a simple scenario File BPM File and it uses simple message type and interface too. The interface mapping working fine. The Integration Process uses no correlations, just transferring the file as it is. IP is checked(F7) no errors found. when running, it picking the file and upto call Adapter it is working. in the SXMB_Moni it shows error in the outbound (PE) status. When we check it in the WorkFlow diagram, it shows error in the send step as Adapter Framework Server, still other scenarios are working fine with the BPM.
please leave good suggestions and checks
thanks,
nikhil

BPM Error: Synchronous Send Step

Hi All,
I am getting the below error in the synchronous send step of my BPM.
Interface urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
I am trying to send a query and get data from a table in this step. I have an abstract synchronous interface attached to this step and I have an inbound synchronous interface at the configuration side as the receiver for the BPM sync. interface.
The errored out interface is the abstract interface used as the response message at the BPM sync step.
Does anyone has encountered this before?
additional error info)(
Work item 000000364714: Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed
Message no. WL821
Diagnosis
The calling of the object method for the work item ended with a return value for which no handling is modeled in the workflow.
System Response
The work item was forced into the error status.
Procedure
Refer to your workflow system administrator.
Procedure for System Administration
Also check the binding between the task container and the method container.
Appreciate your help!
Regards,
Shiny

Hi,
e urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
Are u using 7.1 versin of PI, if so can u check if u r consistently using operation name in interface
Babu

BPM - Send Step to HTTP - How to capture the error?

Hi gurus,
I have a BPM with a Send Step that connects to an http server. I need the following:
- If the HTTP returns code 200, end the BPM
- If the HTTP returns another code, wait 5 minutos and try the send step again.
I've made a LOOP with a flag. Inside the LOOP I have a BLOCK with an exception branch.
In the send step I put in the field "system error" to go to the exception branch and in the exception branch i'm setting my flag to do the loop one more time.
My problem is that the Send Step is not triggering the exception branch! The http returns 405 or 504 and it continues like everything is okey.
Can you help with this?
Thanks in advance !
MD.

Hi Ramakrishna,
Once you create the session, Process the session using
the report RSBDCSUB using submit statement.
It would list out the erroneous records.
Hence, while submitting, just say submit RSBDCSUB in background and export output list to memory.,
Then you can retrieve the list from memory using the FM LIST_FROM_MEMORY into the internal table and finally send the email by the fm you have already mentioned.
Regards,
Ravi

Error in send step in BPM

Hello,
I ehanced an existing BPM where a send step sends data to a J2EE system. I inserted a switch and put the existing send step to one branche and a new send step to the otherweise-branche. The new send step interrupt with an error:
<b>No exception defined for fault message hostname http://xml.apache.org/axis/</b>
But there is an exception branche defined. An idea what's the problem?
I didn't define a message called hostname, so where he got this name from?
thx
chris

No, everything seems fine.
Here is the payload of response :
<i>
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
</i>

How to handle error in Syncrounous Send step in BPM.

Hi All,
i am inserting the data into target database and getting the response from the target database in to XI(BPM) here i am sending the data as a bunch(packets), i mean i am splitting the recods into packets and inserting these packets into target database through Sync Send step... now my problem is how can i handle if any of the packet(one set of bunch recors) was fail, how can i handle this exception.
Thanks in advances for your suggesions and solutions which came by your huge experiences.
B'rgrds,
Srinivas

Since the requirement is to catch the Exception proceed as:
Include a Block in your BPM --> Include the Send Step -> Right-click on the Block and choose insert Exception Branch> In the Exception Branch inlcude the logic that you want to implement in case of error.
Possible Exception Handling logics:
1) Send email to support personnel notifying him of the error and let the remaining process continue
2) Send email to support personnel notifying him of the error and cancel the process
3) Cancel the process.
Make sure that you create a Exception Handler to be included in the Block and also in the System Error section of the Send Step.
Regards,
Abhishek.

BPM send step not executed in BPM (after Message split)

Hello everybody,
we use BPM:
We have a paralell Block which should send the rows of a multiline element. In SXMB_BPE_MONI the send step is not executed?
Any idea?
Thanks lot, regards Mario

HI,
Go to SXMB_MONI_BPE->and check the workflow log (technical details).and go to SXI_CACHE and check the return code of the Integration Process. It should be zero. If not try to activate the same
If there is no error then go with like this-
Also check the Syntax in Integration Repository with F7. Change the IP and activate it. If there is no syntax errors.
Then reimport the IP into Directory and then test your scenario
Regards,
Moorthy

Sync Send step in BPM.

hi all,
My BPM flow starts with a single message that I split using a message map into a list of messages into a block which is foreach mode to be sent synchronously one by one splitted messages to an Oracle stored procedure via the JDBC adapter. After the mapping step, the flow goes into a ParForEach block that executes the sync Send step to the JDBC adapter, and then has a Container Action that collects the responses.
My problem is that BPM seems to not like executing a synchronous send from inside a block. The first execution of the send step will produce an error in the BPM flow.
thanks in advance.
srinivas.
Edited by: sri_rambo on Nov 27, 2009 8:06 AM

My problem is that BPM seems to not like executing a synchronous send from inside a block.
BPM does support SYNCSend step inside a Block....but not for ForEach/ ParForEach mode of execution.
I think you are following this procedure from quite a long time.....sync send inside a foreach block.
Regards,
Abhishek.

Fault message in synchronous send step in BPM

Hi,
When executing a synchronous send step in BPM it is possible to handle application errors (fault messages) with an exception branch. But how do you get hold of the actual data in the Fault message(faultText, faultURL, faultDetail etc) for further processing (mapping)?
Kind regards Johan

Johan,
u have to define another container element in integration process.
For that container element an Async Abstract interface has to created with falult message as the message.
Do u have the fault message defined already...
Also go through this thread.
Fault message handling in BPM
-Naveen.

How to read fields from response message in send step in BPM

Hi ,
I have one BPM scenario where I am using synchronous send step to insert data into database and to get response back from database as success or failure .My scenario involves inserting data into multiple tables and in multiple rows . If all the inserts are successful then I want to write success message else I want the messaage as error . So can we read all the SQL response and store it in container varibale and the have soem decision logic ?

Hi,
for everyinsertion, you will get a response
<INSERT_COUNT> </INSERT_COUNT>
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
if the value ==1 , then insertions is sucessful, if value ==0, then insertion not succsful.
So, in your mapping, just check if any of the values is 0 and if yes, then decide if you have to write a sucess message or a failure message.
Regards,
Bhavesh
Regards,
bhavesh

BPM synchronous send step - Fault message extraction

Hello Experts,
I am developing a BPM with Asynch RFC -> synch Webservice -> Asynch RFC scenario.
I have defined fault message in the synchronous interface used in the send step for web service, and also defined
exception branch where an alert is thrown.
In the alert, i want to send the fault text from the fault message. How can i do that??
Thanks

Hi Mona,
SOAP adapter doesnt support fault messages.
check stephan's reply @ How catch the SOAP Fault Message ?
> SOAP adapter does not support fault message.
> Any fault is treated as error.
> fault messages are only supported for XI messages (ABAP or Java proxies) and RFCs.
Fault message handling is not possible inside BPM.

Send Step BPM Error

Similar Messages

Maybe you are looking for