Send workitem to two users

Hi All,
I need to send a particular workitem to two users. One user is a fixed user and can be hard coded, the other user will be the initiator of the workflow. I have tried creating a container element, type SWD_AOBJID(dict data type radio btn) with multiline with the fixed user as initial value in the container and used container operation, add to table assignment type, to add the second user. But the workitem only reaches the initiator.Need some help on this.
Regards,
Shantanu.

Hello,
Check in the workflow log if the multiline container element really has two values and if so, if they're similar (eg both preceded by US). If so, it should work.
If not, try making it a multiline container like SWWWIHEAD-WI_AAGENT
regards
Rick Bakker
Hanabi Technology

Similar Messages

Can we keep Decision workitem in two users SAP inbox after canel action ?

I have a requirement like " Decision workitem is going to two SAP Users Inbox , when one user opens the work item and choose the cancel and keep workitem in inbox in that case also its disappering in other user's SAP Inbox"
is there any way to keep the work item in both users inbox when one person selects CANCEL AND KEEP WORKITEM IN INBOX ?
Please give me your input.
Thanks and Regards,
veerabrahmam

Rick Bakker wrote:
Hello,
>
> Is this in SBWP or UWL?
>
> This seems to be the SAP standard in some scenarios. You could have the workflow test for Reserved and unreserve it but then what happens if it was reserved on purpose.
>
> regards
> Rick Bakker
> hanabi technology
Hi Rickk ,
it is SBWP
it is intresting to see that case if one of approver reserves it for the purpose of evaluating later.
the thing is our onsite consultant asked like is it possible to keep the decision in the two approvers SAP Inbox after selecting cancel and keep workitem in the inbox.
is that possible ?

Problem in sending workitem to multiple users

Hi All,
i am sending a work item to multiple users for that i have created a multiline attribute the scenario is for plant maintaneance notification i am manipulating and passing the users into that attribute when i execute it manually in the log i can see the agents name in the attribute i have also added US infront of the users name . but my workitem is not getting displayed in the corresponding users inbox .
Thanks

check whether the task is a General task or not. If not make it general and then test. You should test by executing Tcode SWU_OBUF and then logout and login.
<b>Reward points if useful</b>

Issue in workflow workitem that gets triggered to two users at one time.

Hi All,
Below are the query details:
Module: HR
Area:      Workflow
Process: Hiring
There is an workflow in HR module that is triggered when an hiring action is run against an candidate.
There are two or three maximum approvers which is based on the position to which the candidate is hired.
Issue:
During the hiring process some times the workitem is getting triggered to two users at once.
One is the actual approver who should receive the workitem in his UWL and other is the user of our service center who is no where involved in the approval process.
Analysis Done:
We checked the workflow log and found that the actual approver's ID is getting displayed under agent and workflow is complete. But the other user's ID is no where shown in the log but he has received an workitem in his UWL that makes the issue still confusing.
Awaiting for experts suggestions.

Reply to Susan Questions:
You say that 'the workitem is getting triggered to two users at once' - do you mean that there are two workflow instances that are being kicked off at the same time when the hiring action is performed? Or is it that the workflow is generating two tasks that go to these different users?
Ans : There is a single task attached to the activity.
Is this a custom workflow?
Ans : Yes.
Are you certain that the erroneous task is only going to the user in the service center, or is it perhaps going to everybody (marked as a general task)?
Ans : The task is marked as general but the workitem is received by only one user of the service center at a time.
         As this issue has taken place 4 times in the past year all the 4 receiver were different belonging to different position.
Reply to Pavan Questions:
1. Did you try to check the SPRO settings with respect to Hiring Process ,is there any where based on the position does workflow is forwarding the workitem to the other user.
2. Check the other user Roles and in the Org Structure where he is located , there could be a possibility of wrong position holding.
Ans : We checked the org structure, but org structure of both the centers are different and independent there is no linkage    between the two.
*3. IF you are using custom workflow then check if any standard workflow is also getting triggered. Check *
Ans : Yes this is a custom workflow, but no other Standard workflow is being called.
4. Check in the SWEHR3 is any custom entries maintained.
Ans : No, entries are maintained in SWEHR3.
Additional Info :
The task that triggers the workitem has an send mail step before it.
The send mail activity is to notify receiver that there is an workitem lying in the UWL.This mail is received by the actual user and not by the other one.The next step is the task that creates workitem which gets triggered totwo different IDs.
This scenarios mostly has come up when the number of approver is 1. If the approver is more than 1 the workflow runs fine without deviating the workitem to any worng user.

Same Workitem to two diffrent user ID's

HI Team,
1.How to send same workitem to two different user ID's.Give some document for this requ .its urgent..
2.How to auto forwarding the workitem to another user id,if the person is on leave.I had tried SWIA ,but workitem is not listing there. Give me some valuable inputs.
Give me some idea ,its urgent ..
Thanks,
Ram.

Hi Raja Ram,
If u need to send a work item two more than one person u can also use this option.
1) Create a ztable and assign the two users in it.
2) Now create a method in that use SWC_GET_ELEMENT
and write a select statement to retrive the ztable.
3) Now the two values will be stored in a container.
4) now in Work item specify the name of the expression.
That's hit.
Regards,
Dheepak

How do we sync contacts and calendars (ONLY) between two iCloud accounts, two iPhones and one iMac with two user accounts?

This is complex. Until today we had one iMac with two user accounts - one for me and the other for my wife. We sync'd our calendars and contacts between our two user accounts using my iCloud account, thereby keeping our schedules coordinated and our contacts information always the same between us. Also, as I had an iPhone, I sync'd my phone with my iCloud account, thereby keeping the contacts and calendars in the two user accounts on the iMac AND my iPhone sync'd. (I also sync'd other things, like Notes and Mail and Safari settings, between my iPhone and my user account on the iMac, but my wife did not want to be burdened with all my emails showing up in her email account and I wasn't interested in hers, etc., so we didn't sync anything between us other than calendars and contacts.)
We've finally bought my wife an iPhone and set up an iCloud account for her. And of course she now wants to sync several items from HER account on our iMac to HER iPhone, but I don't want them, just as she doesn't want all of my other stuff. But we still want our mutual calendars and contacts to sync to HER new iPhone, just like they already do to mine. But I can't figure out how to CHANGE her iMac user account from using MY iCloud account on the iMac to using HER new iCloud account, and then having HER iCloud account speak to MY iCloud account but share JUST our calendars and contacts.
Originally I tried a workaround by simply having her iPhone log into my iCloud account. That works great for the calendars and the contacts. But...she can't sync anything else from her iMac account to her new iPhone because she's presently "forced" to use my iCloud account. And neither of us want to sync our other things to each other's iMac accounts or iPhones. Also as we're both using my iCloud account, in things like the Find My iPhone app, the Cloud is seeking two phones labeled with my name and none with her's. So we definitely don't want this as the set-up and communications network between our devices.
We want to set up our users on the iMac to sync to our SEPARATE AND DIFFERENT iCloud accounts and then have those iCloud accounts sync calendars and contacts (ONLY) between themselves, and then push that data to our separate iPhones (or the other way, from either of our iPhones to the individual accounts on our iMac and the other person's iPhone). Does this description make sense to you? I've diagramed it nicely using Keynote, but even thiough I can draw it, I can't figure out how to set up and configure all the devices to make it work. If you would like me to send the Keynote slides (just two of them - the current and desired configurations - please send your email address to me at [email protected] and I'll be happy to forward it to you.
If anyone can help me set this up I'd be most appreciative! Thanks so much. Merry Christmas and Happy New Year to all readers in this community!

BobT.
I had the same problem, and decided to look into it last night.
First of all, the solution I would like to have is for Apple to allow for selection of iCloud accounts per application, i.e. Contacts to one, Photo Stream to another. I believe this would be the most straight forward solution for the problem we are facing.
Since this is not an option I came up with a workaround. I was most interested in solving this for Contacts, so this is what I tested for. Now I have all 3 devices with the same contacts.
1) Turn off iCloud for Contacts on all devices. On the device that has the Contacts list that you would like to propagate to all others select to keep the contacts, and on the others select not to keep them.
Note that the current backups still exist on iCloud, so in case something goes wrong you can still turn the iCloud for Contacts back on to get your current Contacts back.
2) In iTunes, sync All Contacts with the phones, starting with the one with the Contacts content you chose to keep.
From this point on, the 3 devices should sync contacts with each other.
This, of course, will stop your iCloud backups of Contacts, but I don't think this is really needed. You are already storing copies of your Conacts on 3 devices, which for good parts of the day are likely not all co-located. You also potentially have Time Machine backups turned on, which would mean there is a 4th copy there as well. For the case of Contacts iCloud only complicates matter ... that is until Apple implements the solution I first wrote about.

I bought a new iphone and as i was setting my apple ID account and i signed in to my account and confirmed two useres with diffrent numbers that were signed to the same apple ID and it messed up my i messege and face time. how do i fix that ?

i bought a new iphone and as i was setting my apple ID account and i signed in to my account and confirmed two useres with diffrent numbers that were signed to the same apple ID and it messed up my i messege and face time. how do i fix that or delete one user ?

Hello sapiii96,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
To sign out of your Apple ID
Go to Settings > FaceTime, tap your Apple ID, and select Sign Out.
Go to Settings > Messages > Send & Receive, tap your Apple ID, and select Sign Out.
Best of luck,
Mario

Two users can't login to Bonjour, but other users can

All the Macs in my house are set to log into iChat on startup, which creates a defacto messaging network around the house. Quite handy. But now, on one particular machine (a G5 iMac iSight) two users can't seem to log into Bonjour, although on the same machine all the other users can.
I've looked at some other posts on this site, and have checked that Address Book shows 'me' as correct for both users. The Firewall is not set to Essential Services Only, and there is no limit on the bandwidth. The Quicktime streaming setting is set to 1.5 mbps.
In iChat, when using one of the two troublesome logins on the G5, when I click cmd-2 to bring up the Bonjour list, it says Bonjour is not enabled, and gives a click button to enable it. But clicking it does nothing - no effect whatsoever.
When those two same users use the external Buddy List (and an AIM screen name) their iChat works fine.

Hi Nick,
This is what I have found out.
It relates more to Shares shown in the Finder but may offer clues.
I have G4 Tower that has been upgraded from Jaguar actually, to Panther, Tiger and Finally Leopard.
Along the way I bought a MacBook Pro. (Now on Snow Leopard)
At this Point I changed the G4's Computer name to represent it was the G4 and called the MacBook Pro "MacBook Pro" rather than my first Admin Account name (otherwise both Computer names and Short names would have been the same)
I also changed the Leopard's My Card in the Address Book to give it a different Name in iChat.
Somewhere during this process the G4 ended up with a Ralph-G4.local ID, a computer's name of Ralph Johns's Computer, a Address Book ID of Ralph G4 and the short name of ralphjohns
The MacBook Pro has MacBook Pro as the Computer name and .local name and the short name is alsoralphjohns. The Address Book My Card is my full name.
Now in discussion with a Level 4 poster who knows more about this than I do I found out that in Leopard if File Sharing is Off the Bonjour ID is still supposed to show in the Snow Leopard Shares.
However if it is ON whether you use AFP or SMB or Both it is only supposed to appear once and mine was appearing twice.
Changing the Computer name to something else seemed to confuse things (I could not Log on to share from Either Computer)
Changing the name back resolved that but changed the .local ID on the G4 as well.
(Changing the .local name back to what it was before seems to have had now effect now.)
However the G4 now only shows once in the MacBook Pro Shares.
I do not think the Upgrades are the distinguishing feature more my poor attempts at making sure the new (then) MacBook Pro had a different ID than the G4.
I have been able to Bonjour Video and send files as well as see the Other Computer in the Bonjour Buddy lists.
So in summary.
The Address Book My Cards have to be Different.
Sometimes changing the Computer name or the .local name does seem to cause issues in File Sharing - which may have some influence on Bonjour as a whole.
Whilst my G4 was showing up in the MacBook Pro as two Shares it was listing the .local name and the Computer's Name as shown in Sharing which were different.
It maybe this if it is happening for this computer that may give clues.
7:59 PM Thursday; October 15, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Regarding to sending workitem in PO.

Hi Friends..
Iam creating one workflow for Purchase order referring standard workflow 20000075.Whenever iam create a PO it automatically trigger that workflow
and send an workitem to approver for to release PO.Everything is fine
but i need to display popup window while workitem reaches SAP user inbox.
(like send express statement in sendmail task).So how can i achieve it.
i need not sending any mail to approver so its not possible to include sendmail task.so how can i achieve it..
Thanks in advance
Gowrishankar

Open the template in PFTC and click change. Open the builder and double click on the node Release of purchase order(000093). Select the 'Other' tab and change the step priority to 1 (Highest). Save and activate the template and refresh the workflow runtime buffer using transaction SWU_OBUF. Then start a new instance as the process is NOT retrospective.
Regards
Gareth

Anyconnect client and clientless connections hang for two users

ASA 5525, v. 9.1(5)19
Anyconnect client 3.1.02026
I have two users who are unable to connect via the AC client or clientless through the web portal. Using the client, it will get stuck in a loop of "checking for updates". On the portal, the connection will proceed to the point of "Cisco Secure Desktop successfully validated... Success.. Reloading..please wait." Then it hangs there.
The issue occurs for the user regardless of which company laptop she logs onto. A help desk tech can use her laptop and successfully connect, but she cannot connect on her own laptop or on another laptop. (Same for the other user.) So the issue doesn't seem to be related to her laptop or the AC installation. (Help desk did reimage her machine early in the troubleshooting process before they realized that the issue seemed to follow the user.)
I've updated the hostscan file - no change in results. Client and clientless connections seem to be working fine for all other users. We're stumped. Suggestions, anyone? thanks!

The LDAP should be server folks -- Active Directory. Chances are whoever manages the ASA's should have access to at least look in Active Directory to look that up. If they don't they need it.
I obviously don't know a lot about what devices you are using, but if you are using ISE, there should be some type of MNT device (Monitoring and Troubleshooting) -- which is collecting the logs and, hopefully, sending them to some type of syslog aggregate collection tool (splunk?).
Otherwise, there should be a device called a CAM (Clean Access Manager) that is collecting logs -- which may also be propagated to a syslog aggregate tool -- although with CAM's, you can pull the reports right out of them in a comma deliminated file (.csv) and go through them that way.
-- The thing that gets me is that it happens to two users no matter what computer they try to connect from, no matter what network they connect from, and other users can authenticate and gain network access on those same devices.
-- That is why it is rather perplexing. Pretty much saying it has to be something with:
- the IP pool they are getting an IP from
- their AD credentials
- their username
- something along those lines, if the information provided was fully accurate.

Forwarding the workitem for multiple users

Hi All ,
I need to forward a workitem which is ready in ready status to multiple users , but I am not sure how is that possible.
1.I tried doing it with SWW_WI_FORWARD but it throws error that WI in ready status cannot be forwarded. how to achieve this
Moreover I have learned that by doing some settings in my SBWP would allow me to forward the work item from workflow administrator ,
2.the seting is goto sbwp->settings->workflow settings->personal settings->enable forwarding to multiple users , but i am not sure how it would enable me to do it,
please anyone can throw some light on the above two queries.
thanks in advance
C S Anand

Hi,
Go to transaction SWIA, put the workitem id, execute. then select the row and press Administrator Forward button(Shift+F12). before the button press, double click on the row and go to menu settings, click on Personal workflow setting, check the check box "Enable Forwarding of workitems to several users".
After pressing the Administrator Forward button(Shift+F12) button, Choose Agent pop up will come. Press the F4 button at Choose Agent pop up. Then Value range pop up will come. go to Users by Address data tab. Then press multiple selection button at the Users field. then put all the agents you need to forward and execute.
Thanks,
Saroj.

When I use messaging there are only two users who automatically go green (MMS?), and are undeliverable. I can't seem to change this. What am I doing wrong?

When I use messaging there are only two users who automatically go green (MMS?), and are undeliverable. I can't seem to change this. What am I doing wrong?

I use message and all other messages are non-sms. When I try to message these two accounts, they automatically use sms, everything I do is the same. The non-sms messages go through just fine (including pictures). The sms messages (no pictures) are always rejected; they have never gone through. They have never been able to send messages to me either (although they can send to others). I have a Verizon cellular data plan.

How can we send workitem after Po approval decision has been taken by appro

Hi.
How can we send workitem after Po approved decision has been taken by approver1 to approver2 in the same flow?
Regards,
Chow.

Some kind requests from a user who is of a different opinion:
Please create one thread for each different question, with a precise thread subject. It will make it easier to search for previously answers to the question someone has, and it will help keep each thread short.
Please do not introduce new questions on an entirely different topic in an existing thread.
Please always check if your answer has been answered already before you start a new thread.
Please do not ask the same question twice just because you did not receive an answer when you asked it first. Post a follow-up to your first thread if you want to make everyone aware that you are still looking for help to solve your problem.
Please mark questions as answered when you either have reiceived the answer, or solved the problem. It is also nice if you leave a little comment about how the problem was solved.
I guess that was all for today...

Given two user accounts on one iMac, how can I notify myself that I have email waiting on the other account?

I have two user accounts on the same machine to monitor (different security levels). I'm in on the main account most of the time but I need to know when the other has unread emails (Yes, different email accounts and they can't see each other). I tried setting up a rule that would send a note to me (to my other email account) when a message arrives but (a) I can't get the rule to execute when the email arrives, and (b) I can't send a non-secure note (eg., "New Mail Waiting") - all I can do is forward the email. Is there any way I can do this without learning AppleScript and writing it myself? (Both user accounts using the same iCloud account)
Thanks,
Don

The "Rule" probably won't work when that user isn't signed in and/or being used. My suggestion is to sign into that email's account on the web service. Example if you have an icloud.com email account, go to icloud.com and go to the little gear in the lower left. Set the rule there. Rules set there should work all the time, since it's "on" all the time. Where as if the rule was set on the Mac Mail app, it has to be opened and what not.
KOT

Letting two users share one synced iCal Calendar

Hi all,
I'm looking for a way to share a single iCal calendar between two users, giving both users the ability to make changes to the calendar. Is this possible with Apple's iCal?
As an example, say I'd like to create a calendar for a trip itnerary. I'm in New York and my host ("Sara") is in San Francisco. I open my iCal, select the "Itinerary" calendar and enter a few events into it. Then, Sara opens her iCal and it automatically loads the "Itinerary" calendar, showing the events I've entered. Knowing San Francisco better than I do, she decides to alter my "Explore Chinatown" entry by extending the hours. The next time I open my iCal, I see the changes Sara made in the "Itinerary" calendar.
I'm sure this has probably been asked before, but even though I searched for it I couldn't find information answering this question. If you can point me in the right direction, I'd really appreciate it.
Thanks in advance!
-Meitar
Mac OS X (10.4.3) iCal Version 2.0.3

If I understand .Mac's services correctly, it
features the ability to let users subscribe to a
calendar, that is read another person's published
calendar, but NOT to make changes on that calendar
and then send these changes back to the publisher,
transparently. Unless I'm mistaken in this regard,
.Mac does not provide a means to let two users share
a single iCal calendar which they can BOTH make
changes to and BOTH keep synced with the other user's
calendar.
yes it does!!!!!!!!
simply log into the single .mac account from any number of computers and use isync. We do this every day between our office & home computers. The calenders in ical are idendical on both. Any alteration can be synced to .mac and the other computer will pick up the change next time it is synced. If there is a conflict, isync will ask which version (either .mac or the computer being synced) to use.
I think that you are confusing publishing calenders and syncing them
However, even if that can be done with .Mac (and if
it can, I'd love to learn how), I require a solution
that doesn't utilitze .Mac because in my particular
situation, the other user with whom I want to share
calendars does not have a .Mac subscription and will
not be able to get one.
The other user does not need a .mac account. The whole point is that they are syncing to the one (ie your) account.
Therefore, I need a solution
that does not rely on .Mac.
Wrong. It would seem that .mac would work.
The only problem is that all the calenders in ical will sync.

Send workitem to two users

Similar Messages

Maybe you are looking for