Sending first result to LMS
Hi,
I'm looking for the correct quiz settings so that when allowed to retake a quiz, the first results/scores
are not passed to the LMS, but the final scores are passed.
Also, I need to know what to set so that if a quiz is failed, how to get the "complete" status to pass
to LMS. My LMS (Rollbook) is looking for "mastery score" and score, so I want the failed result
to cause Cp to set status to complete. Or can I not do that at all? will failed always mean incomplete?
Thanks in advance,
Denise
Further info: These are the course scenarios and results that I need to see.
1. course is presentation type method of content, without a quiz. Need LMS to display "completed/passed: without a score displayed
2. course is presentation type method of content with a quiz. 1 - 10 questions, user is required to take quiz and pass to consider course complete
- allowed 3 attempts to take and retake quiz, either first or subsequent sessions
- if first is failure, and user exits course window in LMS, need to display incomplete/in progress
- if final attempt is failure, and user exits course window in LMS, need to display complete and failed.
- if final attempt is passed, and user exits course window in LMS, need to display complete and passed
i.e., need to send complete status on final attempt, and actual result (pass/fail). And not send "max score"
3. course is presentation type method, with interaction in the Cp screens, with a quiz:
- allowed 3 attempts to take/retake quiz BUT want the retake to be the whole course, not just the quiz, so
would like the "continue" button on the results page to return to course start (so far continue only works
on attempt 1 and I've posted a separate problem on the continue button).
Need this course to work as described in #2 above.
Tried the course described in #3 today, and passed the quiz on first attempt, results displayed correctly,
but LMS displayed "incomplete". Achieving passed does not set status to complete, regardless the
number of tries on the quiz.
Thanks in advance for the help!!
Denise
Similar Messages
-
I've created a quiz. Now how do I set it up to send the
results to an LMS? And in what format are the results sent? Is it
an xml file that will have to be parsed.Hi there
Normally you click Quiz > Quiz Settings (might be Quiz
Preferences) and look at the Reporting node. You enable it and
configure the options for your specific LMS. Each LMS is likely to
be different and will require different settings here.
To my knowledge it is not a XML file that is used. I believe
most of it is done with JavaScript.
Cheers... Rick -
How to make google-search to redirect to first result (automatically) ?
Hello,
I have just installed the latest version of FF on my windows 7.
When I search using google-search by either:
1. Writing somethong in the adress bar and pressing enter
2. Writing something in the search box (thats on the same line as the adress bar)
I am not being redirected automatically to the first result.
How can I change it so that I will go to the first result automatically after pressing enter ?
Thanks in advance for the help!hello belgiamit, you can do it for the address bar the following way:
enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up), search for the preference named '''keyword.url''' & double-click and set that entry to
http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q= -
Error while sending JDBC Results to XI
Dear members ,
I have configured a JDBC Sender based on PLain J2SE Adapter Engine.
When i start the adapter ,i get an error message
ERROR: Finished sending query result to Integration Engine with error "com.sap.aii.messaging.net.TransportException: Sending message '8ba707a0f78911d98f64c565c0a8004d' to Integration Server failed with 'SYSTEM_NOT_CONFIGURED_AS_XMB': '', context '?' , must retry". Skip confirmation and proceed with next query
Can anybody help me out.
My Configuration is as follows :-
jdbc adapter java class
classname=com.sap.aii.messaging.adapter.ModuleDB2XMB
version=30
mode=DB2XMB
Integration Engine address and document settings (example, see docu)
XI.TargetURL=http://hwsapxi:8000/sap/xi/engine?type=entry
XI.User=xiappluser
XI.Password=welcome1
XI.QualityOfService=EO
XI.SenderParty=
XI.SenderService=Factory_Sender
XI.ReceiverParty=
XI.ReceiverService=Factory_Receiver
XI.Interface=FactoryMessageInterface
XI.InterfaceNamespace=http://sap.com/factorydataRavindra,
It could be that the AE was not configured properly during installation. Please refer to the below link and see it helps you narrow down your problem.
Installation - Plain J2SE Adapter Engine
http://help.sap.com/saphelp_nw04/helpdata/en/b3/cc633c3a892251e10000000a114084/frameset.htm
regards,
SK -
Error occurred while sending query result: 'java.lang.NullPointerException'
I am doing end to end scenario from SQL server to File
JDBC --XI -- File
I am getting the following Error while monitoring the sender CC in RWB
"Error occurred while sending query result: 'java.lang.NullPointerException'
Please Help !!Hi,
To see the Adapter Error log, try:
http://<XiServerHostName>:<J2EE-Port>/MessagingSystem
Try viewing the Audit Log for each message (Newspaper Icon)
Regards,
Amitabha -
Send query results to a file using Toad
Hello,
I have a select statement that generates xml rows, and I need to send the results to a file. I am using TOAD VI. The rows generate ok but when I right click and choose the save as option all I end up with is an empty file.
Is there a way I can just send the results directly to a file instead of to the screen?
Thanks.user11293056 wrote:
Would you happen to know of a website that shows how to create an xml file using SQL*Plus?
Thanks.A search of asktom.oracle.com for the following phrase found a couple interesting pages:
table(xmlsequence(cursor
On such page is this one:
http://asktom.oracle.com/pls/asktom/f?p=100:11:1074646661177911::::P11_QUESTION_ID:4061080732051
As an experiment, you might take a look at the output of the following (replace SELECT * FROM MY_TABLE_HERE with your SQL statement):
SELECT
FROM
TABLE(XMLSEQUENCE(CURSOR(
SELECT
FROM
MY_TABLE_HERE
)));Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc. -
Sending synchronization results by mail
Hello,
i've been asked a question and am not sure about the answer.
Is it possible to send synchronization results by mail ?
So for me it gets to :
- is it possible to get the result you see in the webtogo manager in a log file with just the result and number of recordings synchronized.
- is it possible to send the results by mail for each synchronization.
I was thinking about a job, we do synchronizations every nights, but i am really not familiar with these
Thanx for your help
Message was edited by:
tib_tibbyHi,
if I understand your question right, you can get the information you need from MOBILEADMIN.C$SYNC_HISTORY table. I'd recommend to create some periodically executed job, store the last processed id (C$SYNC_HISTORY.SESSION_ID) in some table and look for rows with session_id value greater than the last processed one. Than if there're any new sync-rows, you can send them via email or do whatever you like... -
Sending ALV result as Excel file in email and in background mode
Hello,
My need was to developp a generic program to send ALV result in a Excel file by email (as we have already a program to send any spool in PDF format).
I found package SALV_EXPORT which contains very interesting things.
I have done a program with following selection-screen parameters:
- Name of a program to call
- execution variant linked to this program
- several output options (mail, save as local file, save on application server...)
data: g_guid type guid_32.
data : l_xxml_data type xstring.
g_guid = cl_salv_export_db_storage=>create_guid( ).
export l_mode = 'M' to memory id 'ALV_EXTRACT_MODE'.
export l_guid = g_guid to memory id 'ALV_EXTRACT_GUID'.
* call the program with its variant
submit (p_prog)
using selection-set p_vari
and return.
* Get back the data
l_xxml_data = cl_salv_export_db_storage=>import_xmlstring( guid = g_guid ).
Here, we have a XML data (ALVXML or XML for Excel, i don't know) which is the ALV result with the layout applied (either the alv layout specified on selection-screen of called program or default layout).
This solution is so simple that i wonder that it's not documented (or i haven't found the documentation).
If anybody knows any problem with this solution, has anyu remarks or want to add some enhancement, don't hesitate to post..
Hope this help
ChristopheA review of comments in ALV driver code shows references to "Mendocino" which I believe is now called 'Duet". It's part of SAP and Microsoft Office integration suite:
http://www.sap.com/solutions/duet/index.epx
I have used this method of extracting ALV reports in the past but I don't think it's released for general use.
Thanks,
Abdul Rouhi
Washington, DC -
Sending the result of report to printer
hi friends,
i written code for my report and actually my requirement is to send the result of this report directly to the printer without displaying the list.
could u plz guide me how to go for this task.
regards,
malli.Check this ... yo will find an answer as this is a similar question thread
Printing report directly from printer;
Regards,
Santosh -
Error while sending query result
Hi all,
I am working on a JDBC-XI-IDoc scenario. In my sending JDBC adapter configuration, i have given the Query SQL statement as <b>SELECT * FROM SAP_PROMOTION</b> and Update SQL statement as: <b><TEST></b>
But when i go to adapter monitor, i am seeing an error as follws:
<b>Error: Sending query result failed with com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve binding for the given channelId: Binding:CID=875514bc047b3557a5b53dfb5ef4babe; - retry
last retry interval started 10:54:09 2006-05-25
length 60,000 secs</b>
Can anybody help me how to solve this problem.
Regards,
DivijaDivija,
Am not sure if this is the exact cause for your problem, but would anyways suggest that you take a look at it,
<i>classes12.zip is not compatible with JDK 1.4.</i>
From the note : <b>831162</b>
Oracle JDBC Driver (classes12.zip / classes12.jar) Deadlocks
<b>Q: I have deployed the Oracle classes12.zip / classes12.jar JDBC driver as per the instructions in the XI Configuration Guide.
Unfortunately, I frequently notice hanging database connections. A thread dump taken according to the instructions in note 710154 shows one or more blocking JDBC Sender/Reciver threads and optionally that the JVM has detected a deadlock.
A: The Oracle classes12.zip / classes12.jar driver is compatible with Java 1.2 and Java 1.3 only, but not with Java 1.4. Please upgrade to a current driver (ojdbc14.jar), which does support the Java 1.4 JVM you are using.
Please make sure that you remove classes12.zip / classes12.jar from aii_af_jmsproviderlib.sda prior to adding the new driver as per the instructions in the answer to question #1 above as you will get a class name collision otherwise (all JARs from aii_af_jmsproviderlib.sda are loaded into the same class loader and the driver class name of both driver versions is the same).
Before deploying the updated driver, ensure that the new version is still compatible with your Oracle database server release. For details, please refer to the release notes provided by Oracle.</b>
Regards,
Bhavesh -
Is it possible to send report results as an email attachment in BW3.x ?
Hi Friends,
I have a requirement wherein I need to automate the process to run the report via Reporting Agent..and also to send the results as an e-mail attachment.
Is it possible to do so in BW 3.x..?
I was trying to see if I can run the report using the Reporting Agent Settings, using the Web Templates tab. However I did not see any follo-up actions available for Web templates, but found so for the Exceptions.
Can you please help and let us know if there is a way to do that and what options are available..?
Thank You
Sri lz70d73.1 version.
try to follwong links
loginto rsa1
u will see tab of REPORTING AGENT, press that tab.
u need to schedule the jobs as u schedule process chains,
select ur query, make the time arrangement, select output format,
output type i.e.
http://help.sap.com/saphelp_nw04/helpdata/en/45/67bd3cad649f5ce10000000a114084/content.htm
Reporting Agent Configuration
After the two steps configuration
1 - configure the agent settings for web templates
2 - scheduling package which is a reporting agent scheduler
In RSRAJ Starts a Reporting Agent Job
SAP show-mw the folow information...
All Reporting Agent settings processed
My Questions is ---Where the system save the query data ????
In RSRAM Reporting Agent Monitor in Schedule --> Execution Target --> i have information of aplcation Server. -
Sending query result as html email
hi,
I have requirement to send query result as html emial to user, is there a possibility to send it?
database is 11.2.3
thanks,
7ZGoogle is your friend
http://oracle-base.com/articles/misc/email-from-oracle-plsql.php
https://www.google.nl/search?q=send+email+oracle+database+11g -
Send Query Results to Application server in CSV format
HI All,
I need to schedule a query on a regular basis and send the results to Apllication server in csv format(rows will be more than 65,000).
I tried RSCRM_BAPI transaction but i think it has lot of restrictions like, cannot use texts, calculated keyfigures, etc. so cannot use this.
cannot use Infospoke since there are calculated keyfigures in the query.
Information Broadcasting is not setup in my system
Tried WRITEQUERY but it only send the results to Spool, special handling is needed to move the data from spool to Appl. server.
is there any other way i can achive this, is it even possible?
Thanks,
S.B.I dont know if this helps.
1)You can save the file as a normal CSV file on your desktop.
2) and Based on the ABAP code using ( OPEN DATASET and CLOSE DATASET statements) You can put your file into the application server
but i am not sure if you can use this methodilogy for an automated and continous process
Regards
satish -
Send report result to mobile phone
Hi,
Is it possible to send report result information to a mobile phone via SMS/text?
Thanks,
MilindFor a complete mobile BW scenario check these docs
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d354ab90-0201-0010-5484-8fd287c30066
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/27ed0b95-0501-0010-63bb-dde7b5040910
hope it helps
Andreas -
Adding prompts dynamically and then send the results to users via email
Hi,
We have to schedule the reports for auto delivery to users at a specific time period. Please, tell me the mechanism to schedule them and how to assign prompt values to them. Currently, the reports are run by users by selecting prompts from the dashboard. If we schedule them, we will have to add some of these prompts dynamically and then send the results to users via email.
Thanks in advance!Hi,
I haven't tested it myself...but may be the following steps can help you.
Fill some session variables depending on the the name of the user who logs in (this can be done easily be creating different session variables and put some executing order in it)
Then you use these session variables as default values for your prompts. So the report will be executed making use of this default values.
And by scheduling your ibot..you can send it by mail.
I don't know if it's this what you're looking for...probably you have to base your prompt values depending on the users that are selected in your ibot?
Hope it can help y ou in some way or another...
KR,
A
Maybe you are looking for
-
ZENWSBROWSER on Win2000 Citrix server
When trying to remote control using the Zenwsbrowser app (DS auth), the box says Desktop Management - "Processing Request, Please Wait" - then the box disappears and that's it - no remote control. However, on that same user's session, if you go into
-
Problems opening EPS-files in Illustrator CS5.1
I have problems opening some EPS-files that I downloaded from Shutterstock. Their support person told me to contact your support. I'm using Illustrator CS5.1 on a PC. When I try to open the files Illustrator's suddenly not responding and I have to cl
-
Encore CS5 freezes on "initiating transcoding" during startup
At the moment I am a very frustrated Encore CS5 user. Help. I cannot get Encore to open. The program will start and when it gets to "initiating transcoding" it will become non responsive and the only way to stop it is to turn the power off on the c
-
Problem Photoshop subscription
I signed up for photoshop month to month subscription but it's states my trial has expired. What am I doing wrong?
-
Hard Drive Not Mounting, but showing connected in Disk Utility
I accidentally locked myself out of my external hard drive. While it was connected, I went into the Info and went under "Ownership & Permissions" and unchecked the Ignore ownership on this volume and I clicked the You Can drop box and changed it to N