Sending Quiz Results to LMS

I've created a quiz. Now how do I set it up to send the
results to an LMS? And in what format are the results sent? Is it
an xml file that will have to be parsed.

Hi there
Normally you click Quiz > Quiz Settings (might be Quiz
Preferences) and look at the Reporting node. You enable it and
configure the options for your specific LMS. Each LMS is likely to
be different and will require different settings here.
To my knowledge it is not a XML file that is used. I believe
most of it is done with JavaScript.
Cheers... Rick

Similar Messages

Sending quiz data to LMS

Hi
In CP4 is there a way to send the quiz results at the end of the project? What i am runing into is, I have three slides that run after the quiz has been completed but it seams while the quiz is sending the data to the lms the project keeps going and so messes up the voice over and slides timing, at one point I have two slides voice over at the same time.
Mike

After trying a couple of times I am still having one of those days.
Even with Rod's suggestion of the new scorm template from Adobe, I am still finding that after the quiz results page the next two slides voice over is merging into one and they are not following the time line.. I think it is due to the data being transferred to the lms..
So to give you an idea of what I mean, I get something like this:
After completing the quiz - 20 questions we show the results page.
Then click next to continue from the results page.
Next slide starts but voice over only starts after a delay of up to 20-30 seconds then it starts. The total timeline for this slide is 38 seconds.
After time line for this slide reches 38 seconds we go to the next slide and voice over starts for that one.
Now I have two voice overs going at the same time until they both end as the second slide has an exit button on it and is paused until they click it.
Any ideas?
Mike

Send quiz results for users without Internet access

We have a group of developers in India who do not have internet access. I have created an eLearning course in C4 with a quiz at the end. For most users, they take the course through our LMS and we can report results without a problem. However, we have a group of developers in India who do not have internet access. Is there a way to capture name and quiz results and send them via email? Alternatively, we can open up a port to access Connect, but I still need to report name and quiz results.
Thank you,
FG

Hello,
Are those users connected in a network? If yes, with the version of Captivate 5 (will be available shortly) it will be possible to have the results send and stored on a server.
Lilybiri

Sending first result to LMS

Hi,
I'm looking for the correct quiz settings so that when allowed to retake a quiz, the first results/scores
are not passed to the LMS, but the final scores are passed.
Also, I need to know what to set so that if a quiz is failed, how to get the "complete" status to pass
to LMS. My LMS (Rollbook) is looking for "mastery score" and score, so I want the failed result
to cause Cp to set status to complete. Or can I not do that at all? will failed always mean incomplete?
Thanks in advance,
Denise

Further info: These are the course scenarios and results that I need to see.
1. course is presentation type method of content, without a quiz. Need LMS to display "completed/passed: without a score displayed
2. course is presentation type method of content with a quiz. 1 - 10 questions, user is required to take quiz and pass to consider course complete
- allowed 3 attempts to take and retake quiz, either first or subsequent sessions
- if first is failure, and user exits course window in LMS, need to display incomplete/in progress
- if final attempt is failure, and user exits course window in LMS, need to display complete and failed.
- if final attempt is passed, and user exits course window in LMS, need to display complete and passed
i.e., need to send complete status on final attempt, and actual result (pass/fail). And not send "max score"
3. course is presentation type method, with interaction in the Cp screens, with a quiz:
- allowed 3 attempts to take/retake quiz BUT want the retake to be the whole course, not just the quiz, so
would like the "continue" button on the results page to return to course start (so far continue only works
on attempt 1 and I've posted a separate problem on the continue button).
Need this course to work as described in #2 above.
Tried the course described in #3 today, and passed the quiz on first attempt, results displayed correctly,
but LMS displayed "incomplete". Achieving passed does not set status to complete, regardless the
number of tries on the quiz.
Thanks in advance for the help!!
Denise

How to send quiz results to a web page?

Okay, this should have taken 2 minutes, not 2 hours. Very frustrating. Here is the situation:
* Downloaded Captivate 5 Trial Version
* Created based quiz (which took forever to figure out how to set the correct answers -- HORRIBLE user interface for setup, but that is another issue)
* I want the results sent to a web page. I will code the web page & database calls, etc. to handle the information (I am a web developer). Just need the information sent somewhere!
Several big issues here:
1. When setting up a URL for the "Pass or Fail", nothing happens. User not taken anywhere. No "Post Results" button shown. The Captivate file just ends and that's it. ??
2. Finally figured out that I needed the "Internal Server" option chosen to have a Post Results button shown. Okay.
So when I click Post Results (after answering the 5 questions correctly), I am shown a login box. Why? What is this for? This is not needed. I am going to an INTERNAL SERVER. It is none of Adobe's business what this person's name/email is. What gives? Okay... anyways, I enter my own Adobe login information. It then says "Connecting..." then I get a Status Message that says "Unknown Error". Keep in mind this will be used by a general audience, of which approximately 99.9% will not have an Adobe ID, nor should they need one.
How I can easily have the Captivate file redirect the user to pages like this: Confirm.aspx?pass=yes or Confirm.aspx?pass=no.
I don't need anything fancy. But I do need something that works. This is terribly frustrating and I'm about to say it just doesn't work. Please tell me I am wrong.
Thank for your time and for reading this.
-Randy

The Quiz Results slide's Continue button actions are set under Quiz Preferences > Pass or Fail > If Passing Grade etc. By default, the Continue button is set to just continue on to the next slide after the Quiz Results.
After the user clicks the Continue button on the Quiz Results slide any Pass/Fail actions you've set up there will be evaluated and executed.
So if the user achieved a passing score, and you set up an action such as Go to URL in Current Window for that case, then the user should find themselves redirected to that URL. If there was a different action for Failure, and the user failed, then that should happen. But either of these will only happen after the Continue button is clicked.
I tested this by setting www.google.com as the go to URL and it worked. To see if the URL is the issue, try using another URL that you know everyone can get to. If that works, try to find out why the URL you want to use is not working. If no URL works, something else is interfering with the action.

Quiz Results without LMS

Is there a way in Captivate 3 without an LMS to report to
that will capture quiz questions answered correctly, skipped,
answered in correctly, etc.? The e-mail function only sends
pass/fail. I would appreciate any help you can give me.

Hi ClydeMJ,
I posted on this earlier.
Here
Hope it helps.
tiolorf

Articulate quiz results to LMS (Sumtotal)

Hi there,
When I upload an Articulate Quizmaker quiz directly into the
Sumtotal LMS (using Scorm), the results get transmitted to Sumtotal
without any problem. But when I place the quiz in a Powerpoint and
then publish it with Articulate, the scores don't get transmitted
to Sumtotal anymore. Neither does the status change to completed,
so apparently there is no communication at all.
How can I solve this?
Thanks
Gert

Hi Gert
Ummm, isn't this a question better suited for Articulate?
This is a forum intended for Captivate users.
Or did you mean to say "Captivate" instead of "Articulate"?
Cheers... Rick

Help Needed!! - Sending Quiz Results Via Email

Sorry guys if this is the wrong forum to post this topic in,
I created a piece of e-learning with a simple quiz. I want a
simple mail to be generated and sent to me once someone has either
passed or failed this quiz,
I think i'm doing everything right:
Preferences - Quiz - Reporting - i select the email option,
and enter my email address. This should mean that once a quiz is
completed a .csv file should be sent to my email account.
I then go on to publish the project as .swf file. It runs
through fine, but no mail is generated and sent? Does anyone have
any suggestions as to where i may be going wrong,
Sorry if this was posted before, i've had a look around and
couldnt see it?
Thanks,
Charlie

This is a double-post. Probably a forum malfunction.
Click
here to read or reply to the original thread.

Posting quiz results to LMS

Hi,
Can some one please suggest whats the best LMS tool out there in the market to publish the training manual. I tried Acrobat.com but i do not think it can be considered as LMS system? Any sugestions?
Thanks,
Krishna

What boggles my mind is why Adobe hasn't made a Captivate Reporting solution that writes to a Cold Fusion database like the Wamp/MySql solution. Cold Fusion is an Adobe product so you'd think they'd keep it at home.
Susan Wright (Equilady)
Remember, the mighty oak was just a nut that held its ground.
http://www.equilady.com

Sending flash quiz results to an LMS

Hey Guys,
Using Flash CS3, having issues getting flash to send quiz results to a LMS. Using the Flash quiz templates, exporting with SCORM 1.2 compliance. The LMS is able to track times attempted and if the lesson was complete or not, however the quiz results don't reach the LMS.
I think this can be resolved in the actionscript or the javascript that gets exported with the HTML file
Apparently you can control the javascript functions with FScommands from actionscript
Something like fscommand ("LMSSetValue","cmi.core.score.raw" + "," + integer);
I don't know where in the actionscript this should be triggered from
I can't find documentation from adobe about this function
Has anyone else come across this issue?

In case anyone was interested in an answer to this
Apparently fscommands are an older way of getting data to an LMS
The current way of doing it is using an external class to handle calls to and from the LMS
Philip Hutchison's site http://pipwerks.com/ has alot of helpful information on this topic
A good starting point is here http://pipwerks.com/2008/04/27/how-to-add-basic-scorm-code-to-a-flash-movie/
Hope this helps someone

Problems e-mailing quiz results

I'm trying to send quiz results to an e-mail address - it
does that fine at the end of the quiz, but it also sends a set of
"fail" stats on most slides, so the person taking the quiz ends up
with a stack of e-mail messages to send! I've tried different
variations of settings in Quiz Manager, I've also tried select the
actual buttons on the screens concerned and under Properties saying
that I do not want results from this screen...but I still get them.
Am I doing something really stupid, and is there an easy
answer to this?
Any help gratefully received!

I don't have an answer for you, but I am having the exact
same issue, so I am thinking if you are doing something stupid, so
am I, or MAYBE there is something wrong with Captivate2. I did this
very successfully in the previous version so I don't know what
could be causing the issue.
P.S. I just downloaded a project from the website and
converted it Captivate2 and published. Previously, it worked but
after conversion it began behaving the same way.

Adobe Presenter 9 quiz results reporting to LMS

We have over 50 users of AP9, and currently use a Success Factors LMS. Our AP9 quiz results are currently reporting only the cut/mastery score to the LMS student transcript, not the actual score the student gets. Any ideas? I've read all the help and tutorial material and it does not address the actual score reporting anywhere. What are the correct quiz and Reporting options settings to get actual scores reported for a final quiz? We SCORM wrap v1.2. Our LMS suppport says it is pulling what AP9 sends- which is the cut score. When we test as a learner, we can get 100% but if the mastery score is set at 80% we see as a learner we acheived 100% but only 80% score goes to our transcript. Does AP 10 function differently in this aspect than AP 9?
Thanks, Elizabeth

Hello,
I am experiencing a similar issue. Was a resolution ever found?

Presenter 7 tracking quiz results without a LMS

Is there a way to track quiz results from quizzes recorded in Presenter 7, without having a LMS? Thanks.

Same exact question I have. I would like to place the presenter file on our GoDaddy server (ugh, I know, not my choice) and have a way for the course taker and us to be able to view the scores of quizzes as well as the final score of the course. Any help with this would be highly appreciated.

CP4 Access/Excell import - Quiz result email sending

Hi - sorry for my bad english - i'm good in order a beer, but in technik a loser, so don't beat me.
First question: is there any way to fill up a quiz-pool from a Access or Excel database?
Second question: What can i do to send the result of the quiz to a email-account?
I have insert a email-address, but it is not working - maybe i have to do more ?
Thanks a lot for your help.
Friendly regards, Wolvo
PS.: If it helps for more understanding i can send this in german too

Hi Lilybiri - thanks a lot for your help.
If a customer like to create a big quiz perhaps for schools a.s.o. is the work on the base very time expensiv.
The quiz-pool in CP4 is helpfull, but not very good to handle - so it's maybe a good idea, to got a extern data base.
I have reporting to a email address anabled, and on the end of the quiz appears a buttun "send" without any function.
Maybe it is a problem of CP4 with W7 64 bit?
It would be very helpfull to report the resolved test to a email.
Friendly greetings, Wolvo

Can I generate a report from my Quiz results....

and Print them out after someone completes a quiz? Without
using a LMS or the email function?
I would like a participant to complete a simple pre
assessment activity and then have Captivate send the results to the
printer.
Anyone doing this?
Thanks in advance for any insight.

Hi Tide88 and welcome to our community
Captivate doesn't offer a built in way to do it, but you can
visit fellow Adobe Community Expert Paul Dewhurst's site
Raising
Aimee and grab a small widget that you drop on the Captivate
slide that allows the user to print.
I believe that Paul asks for donations in order to help keep
development going. And I can't underscore enough how useful his
widgets can be! So if we all continue to contribute, we will all
benefit.
Cheers... Rick

Sending Quiz Results to LMS

Similar Messages

Maybe you are looking for