Sending sapscript form to an external mail
i need to send sapscript form to an external mail like for example a yahoo mail from SAP. i need an ABAP code that performs this function. its urgent, please
1) REPORT PROGRAM - RSTXPDFT4 ,
FIRST GENERATE SPOOL REQUEST THEN DOWNLOAD SAPSCRIPT TO PDF FILE ON LOCAL PC.
2) copy this code to send this downloaded form to external mail -
*& Report ZGILL_SENDMAIL_PDF *
REPORT ZGILL_SENDMAIL_PDF .
INCLUDE ZGILL_INCMAIL. "SEE BELOW FOR INCLUDE PROGRAM CODE.
* DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
* SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case DEFAULT '[email protected]'.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY DEFAULT 'C:TEMPSALARY_SLIP1.PDF'.
* AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
* START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
* FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
* CHECK_DOS_FORMAT =
IMPORTING
* DRIVE =
EXTENSION = extension
NAME = name
* NAME_WITH_EXT =
* PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
**********************iNCLUDE pROGRAM*********************************************
*& Include ZGILL_INCMAIL *
* Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
* FORM
FORM ml_customize USING objname objdesc.
*----------- Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
*--------- Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
* FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
* FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
* FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
*--------- Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
* IMPORTING
* COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
* Header Data
* Already Done Thru FM
* Main Text
* Already Done Thru FM
* Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
* Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
* Receiver List
* Already done thru fm
ENDFORM. "ml_prepare
* FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
* CONTENTS_HEX = objhex
* OBJECT_PARA =
* object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
* FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
*-------------- Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
*------------- Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
* FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
*-------- Data
DATA : pos TYPE i.
DATA : len TYPE i.
*------------ Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
***********************INCLUDE END*********************************
Similar Messages
-
Sending sapscript form by email
dear experts
i want to send sapscript forms by email from sap. how is it done. is there any configuration that needs to be doneHello,
I have done in case where we are sending to an external mail id.
Check the code it may help u.
REPORT Z_SCRIPT .
DATA: itcpo LIKE itcpo,
tab_lines LIKE sy-tabix.
Variables for EMAIL functionality
DATA: maildata LIKE sodocchgi1.
DATA: mailpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: mailhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: mailbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailrec LIKE somlrec90 OCCURS 0 WITH HEADER LINE.
DATA: solisti1 LIKE solisti1 OCCURS 0 WITH HEADER LINE.
PERFORM send_form_via_email.
FORM SEND_FORM_VIA_EMAIL *
FORM send_form_via_email.
CLEAR: maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
REFRESH: mailtxt, mailbin, mailpack, mailhead, mailrec.
Creation of the document to be sent File Name
maildata-obj_name = 'TEST'.
Mail Subject
maildata-obj_descr = 'Subject'.
Mail Contents
mailtxt-line = 'Here is your file'.
APPEND mailtxt.
Prepare Packing List
PERFORM prepare_packing_list.
Set recipient - email address here!!!
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
APPEND mailrec.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = maildata
put_in_outbox = ' '
TABLES
packing_list = mailpack
object_header = mailhead
contents_bin = mailbin
contents_txt = mailtxt
receivers = mailrec
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
ENDFORM.
Form PREPARE_PACKING_LIST
FORM prepare_packing_list.
CLEAR: mailpack, mailbin, mailhead.
REFRESH: mailpack, mailbin, mailhead.
DESCRIBE TABLE mailtxt LINES tab_lines.
READ TABLE mailtxt INDEX tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
Creation of the entry for the compressed document
CLEAR mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
APPEND mailpack.
Creation of the document attachment
This form gets the OTF code from the SAPscript form.
If you already have your OTF code, I believe that you may
be able to skip this form. just do the following code, looping thru
your SOLISTI1 and updating MAILBIN.
PERFORM get_otf_code.
LOOP AT solisti1.
MOVE-CORRESPONDING solisti1 TO mailbin.
APPEND mailbin.
ENDLOOP.
DESCRIBE TABLE mailbin LINES tab_lines.
mailhead = 'TEST.OTF'.
APPEND mailhead.
Creation of the entry for the compressed attachment
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'OTF'.
mailpack-obj_name = 'TEST'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
APPEND mailpack.
ENDFORM.
Form GET_OTF_CODE
FORM get_otf_code.
DATA: BEGIN OF otf OCCURS 0.
INCLUDE STRUCTURE itcoo .
DATA: END OF otf.
DATA: itcpo LIKE itcpo.
DATA: itcpp LIKE itcpp.
CLEAR itcpo.
itcpo-tdgetotf = 'X'.
Start writing OTF code
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'Z08V3_COLLI'
language = sy-langu
options = itcpo
dialog = ' '
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'START_FORM'
EXCEPTIONS
error_message = 01
OTHERS = 02.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
window = 'MAIN'
EXCEPTIONS
error_message = 01
OTHERS = 02.
Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
EXCEPTIONS
error_message = 01
OTHERS = 02.
MOVE-CORRESPONDING itcpo TO itcpp.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
result = itcpp
TABLES
otfdata = otf
EXCEPTIONS
OTHERS = 1.
Move OTF code to structure SOLI form email
CLEAR solisti1. REFRESH solisti1.
LOOP AT otf.
solisti1-line = otf.
APPEND solisti1.
ENDLOOP.
ENDFORM.
I am sending to [email protected].
So proceed in similar manner and let me know if u face any problem.
Regards -
H can we send script form to client through mail.
h can we send script form to client through mail.
<<removed by moderator>>
Search SDN for more details on these...
Thanks,
Anmol.
Edited by: kishan P on Apr 6, 2011 11:49 AM -
Corrupt file attachment when sending sapscript form by mail
i have requirment to send sapscript through mail but when open my attachment it is giving file is corrupted.let me know where i am wrong
i am specifying the code here
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
* MAX_LINEWIDTH = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
* PDF_DELETE_OTFTAB = ' '
* PDF_USERNAME = ' '
IMPORTING
bin_filesize = binfilesize
* BIN_FILE =
TABLES
otf = datab[]
lines = pdftab[]
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH it_pdf[].
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
EXPORTING
line_width_dst = '255'
TABLES
content_in = pdftab[]
content_out = it_pdf[]
EXCEPTIONS
err_line_width_src_too_long = 1
err_line_width_dst_too_long = 2
err_conv_failed = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
"Subject of the mail.
w_document_data-obj_name = 'MAIL_TO_HEAD'.
w_document_data-obj_descr = 'Regarding Mail Program by SAP ABAP'.
"Body of the mail
w_body_msg = 'This is body of mail msg.'.
APPEND w_body_msg TO i_body_msg.
CLEAR w_body_msg.
"Write Packing List for Body
DESCRIBE TABLE i_body_msg LINES g_tab_lines.
w_packing_list-head_start = 1.
w_packing_list-head_num = 0.
w_packing_list-body_start = 1.
w_packing_list-body_num = g_tab_lines.
w_packing_list-doc_type = 'RAW'.
APPEND w_packing_list TO i_packing_list.
CLEAR w_packing_list.
"Write Packing List for Attachment
w_packing_list-transf_bin = 'X'.
w_packing_list-head_start = 1.
w_packing_list-head_num = 0.
w_packing_list-body_start = 1.
DESCRIBE TABLE it_pdf LINES w_packing_list-body_num.
w_packing_list-doc_type = 'PDF'.
w_packing_list-obj_descr = 'PDF Attachment'.
w_packing_list-obj_name = 'PDF_ATTACHMENT'.
w_packing_list-doc_size = w_packing_list-body_num * 255.
APPEND w_packing_list TO i_packing_list.
CLEAR w_packing_list.
"Fill the document data and get size of attachment
w_document_data-obj_langu = sy-langu.
READ TABLE i_body_msg INTO w_body_msg INDEX g_tab_lines.
w_document_data-doc_size = ( g_tab_lines - 1 ) * 255 + STRLEN( w_body_msg ).
"Receivers List.
w_receivers-rec_type = 'U'."Internet address
w_receivers-receiver = p_mail.
w_receivers-com_type = 'INT'.
w_receivers-notif_del = 'X'.
w_receivers-notif_ndel = 'X'.
APPEND w_receivers TO i_receivers .
CLEAR:w_receivers.
"Function module to send mail to Recipients
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_document_data
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
sent_to_all = g_sent_to_all
TABLES
packing_list = i_packing_list
contents_bin = it_pdf
contents_txt = i_body_msg
receivers = i_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
MESSAGE 'Mail Successfully Sent' type 'S'.
ENDIF.
Edited by: sam_ins123524 on Oct 8, 2010 9:31 AM
Edited by: sam_ins123524 on Oct 8, 2010 9:33 AM
Moderator message: subject corrected for you, please use a more descriptive one next time, also use code tags.
Edited by: Thomas Zloch on Oct 8, 2010 10:51 AMHi,
Once you get otf data, Use FM 'SX_OBJECT_CONVERT_OTF_PDF' to convert it to PDF. Then use CONTENT_BIN to send mail.
Refer below code:
* Converting OTF data to single line
LOOP AT I_OTF INTO WA_OTF.
CONCATENATE WA_OTF-TDPRINTCOM WA_OTF-TDPRINTPAR INTO WA_PDF.
MOVE WA_PDF TO WA_CONTENT_TXT.
APPEND WA_CONTENT_TXT TO I_CONTENT_TXT.
CLEAR: WA_CONTENT_TXT.
ENDLOOP.
* Converting to PDF Format
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
FORMAT_SRC = C_OTF
FORMAT_DST = C_PDF
DEVTYPE = C_PRINTER
CHANGING
TRANSFER_BIN = WA_TRANSFER_BIN
CONTENT_TXT = I_CONTENT_TXT
CONTENT_BIN = I_CONTENT_BIN
OBJHEAD = WA_OBJHEAD
LEN = V_LEN_IN.
*- Send mail
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = L_WA_DOCUMENT_DATA
TABLES
OBJECT_CONTENT = I_CONTENT_BIN
RECEIVERS = L_I_RECEIVERS. -
Sending sapscript form through Email
Hi,
I modifyed a std sapscript form for customer statement and that output i want to send to the customer through Email.So now i need a help for further what are the steps need to be do for sending that form by email.Pls be in details so that for me easy to solve this.
Thanks,
Rajendra.Hi ,
I am using the below code to send the form output by mail but it is not working for me.pls correct my code where i want to change so that i can solve my issues.
DATA: itcpo LIKE itcpo,
tab_lines LIKE sy-tabix.
Variables for EMAIL functionality
DATA: maildata LIKE sodocchgi1.
DATA: mailpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: mailhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: mailbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailrec LIKE somlrec90 OCCURS 0 WITH HEADER LINE.
DATA: solisti1 LIKE solisti1 OCCURS 0 WITH HEADER LINE.
parameter: p_email1 like somlreci1-receiver .
PERFORM send_form_via_email.
FORM SEND_FORM_VIA_EMAIL *
FORM send_form_via_email.
CLEAR: maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
REFRESH: mailtxt, mailbin, mailpack, mailhead, mailrec.
Creation of the document to be sent File Name
maildata-obj_name = 'TEST'.
Mail Subject
maildata-obj_descr = 'Subject'.
Mail Contents
mailtxt-line = 'Here is your file'.
APPEND mailtxt.
Prepare Packing List
PERFORM prepare_packing_list.
Set recipient - email address here!!!
mailrec-receiver = p_email1.
mailrec-rec_type = 'U'.
APPEND mailrec.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = maildata
put_in_outbox = ' '
TABLES
packing_list = mailpack
object_header = mailhead
contents_bin = mailbin
contents_txt = mailtxt
receivers = mailrec
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
ENDFORM.
Form PREPARE_PACKING_LIST
FORM prepare_packing_list.
CLEAR: mailpack, mailbin, mailhead.
REFRESH: mailpack, mailbin, mailhead.
DESCRIBE TABLE mailtxt LINES tab_lines.
READ TABLE mailtxt INDEX tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
Creation of the entry for the compressed document
CLEAR mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
APPEND mailpack.
Creation of the document attachment
This form gets the OTF code from the SAPscript form.
If you already have your OTF code, I believe that you may
be able to skip this form. just do the following code, looping thru
your SOLISTI1 and updating MAILBIN.
PERFORM get_otf_code.
LOOP AT solisti1.
MOVE-CORRESPONDING solisti1 TO mailbin.
APPEND mailbin.
ENDLOOP.
DESCRIBE TABLE mailbin LINES tab_lines.
mailhead = 'TEST.OTF'.
APPEND mailhead.
Creation of the entry for the compressed attachment
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'OTF'.
mailpack-obj_name = 'TEST'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
APPEND mailpack.
ENDFORM.
Form GET_OTF_CODE
FORM get_otf_code.
DATA: BEGIN OF otf OCCURS 0.
INCLUDE STRUCTURE itcoo .
DATA: END OF otf.
DATA: itcpo LIKE itcpo.
DATA: itcpp LIKE itcpp.
CLEAR itcpo.
itcpo-tdgetotf = 'X'.
Start writing OTF code
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'Z2006FICSE'
language = sy-langu
options = itcpo
dialog = ' '
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'START_FORM'
EXCEPTIONS
error_message = 01
OTHERS = 02.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
window = 'MAIN'
EXCEPTIONS
error_message = 01
OTHERS = 02.
Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
EXCEPTIONS
error_message = 01
OTHERS = 02.
MOVE-CORRESPONDING itcpo TO itcpp.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
result = itcpp
TABLES
otfdata = otf
EXCEPTIONS
OTHERS = 1.
Move OTF code to structure SOLI form email
CLEAR solisti1. REFRESH solisti1.
LOOP AT otf.
solisti1-line = otf.
APPEND solisti1.
ENDLOOP.
ENDFORM.
Hope i can expect the feedback soon from you guys.
Thanks,
Rajendra. -
Sending from Business workplace to External mail ID
Hi,
Please Some help me on this issue am getting below error when am trying to send mail from Business Workplace to External Mail
Cannot process message , no route from SAPUSER TO abc123 at gmail dot com
I done configuration by refereeing below.
Please follow these steps:
1.) tcode = SCOT
2.) double click SMTP
3.) under "SMTP Connection" section, fill in your mail host IP(ex: webmail.sap.com) and the port number(25) and code page = No conversion.
4.) under "Supported address types", make sure Internet is checked, and click on "Set". The Address area has to be *
5.) To test route,
SCOT -->Utilities --> Routing test
RecipientAddr.type = INT
Recipient addr. = abc.xyz at sap dot com
6.) You also need to set the Default Domain.
SCOT --> Settings --> Default Domains (webmail.sap.com)
7.)Now go to tcode SBWP,compose a mail and in the recipient address,enter abc.xyz at sap dot com and send.
8.) Come back to SCOT and click on Utilities-->Start send process(CtrlF7) and execute.+
Thanks,
GALHi
Same problem with me.
Mails are not sending to external mail id.
Pls help me out!
Regards. -
Issue in External send - smart forms
hi All,
i have written a new print program for smart form and have assigned it to zoutput type.
The print preview and spool are perfectly fine.
when i give the medium as external send, it is not sending any attachmnet to the external mail id i gave.
my code is as follows.
PERFORM set_print_param USING ls_addr_key
ls_dlv-land
CHANGING ls_control_param
ls_composer_param
ls_recipient
ls_sender
ret.
FORM SET_PRINT_PARAM USING IS_ADDR_KEY LIKE ADDR_KEY
IS_DLV-LAND LIKE VBRK-LAND1
CHANGING CS_CONTROL_PARAM TYPE SSFCTRLOP
CS_COMPOSER_PARAM TYPE SSFCOMPOP
CS_RECIPIENT TYPE SWOTOBJID
CS_SENDER TYPE SWOTOBJID
RET TYPE SY-SUBRC.
DATA: LS_ITCPO TYPE ITCPO.
DATA: LF_REPID TYPE SY-REPID.
DATA: LF_DEVICE TYPE TDDEVICE.
DATA: LS_RECIPIENT TYPE SWOTOBJID.
DATA: LS_SENDER TYPE SWOTOBJID.
LF_REPID = SY-REPID.
CALL FUNCTION 'WFMC_PREPARE_SMART_FORM'
EXPORTING
PI_NAST = NAST
PI_COUNTRY = IS_DLV-LAND
PI_ADDR_KEY = IS_ADDR_KEY
PI_REPID = LF_REPID
PI_SCREEN = XSCREEN
IMPORTING
PE_RETURNCODE = RET
PE_ITCPO = LS_ITCPO
PE_DEVICE = LF_DEVICE
PE_RECIPIENT = CS_RECIPIENT
PE_SENDER = CS_SENDER.
IF RET = 0.
MOVE-CORRESPONDING LS_ITCPO TO CS_COMPOSER_PARAM.
CS_CONTROL_PARAM-NO_OPEN
CS_CONTROL_PARAM-NO_CLOSE
CS_CONTROL_PARAM-DEVICE = LF_DEVICE.
CS_CONTROL_PARAM-NO_DIALOG = 'X'.
CS_CONTROL_PARAM-PREVIEW = XSCREEN.
CS_CONTROL_PARAM-GETOTF = LS_ITCPO-TDGETOTF.
CS_CONTROL_PARAM-LANGU = NAST-SPRAS.
CS_CONTROL_PARAM-REPLANGU1
CS_CONTROL_PARAM-REPLANGU2
CS_CONTROL_PARAM-REPLANGU3
CS_CONTROL_PARAM-STARTPAGE
ENDIF.
ENDFORM.
after this i am calling smart form with all the required parameters.
CALL FUNCTION gv_function
EXPORTING
control_parameters = ls_control_param
output_options = ls_composer_param
archive_index = toa_dara
archive_parameters = arc_params
mail_recipient = ls_recipient
mail_sender = ls_sender
user_settings = space
IMPORTING
JOB_OUTPUT_INFO = ls_job_info
TABLES
zmm_purord_at = zmm_purord_at
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
i am not getting any mail to the desired mail id.
Any pointers to this would be highly appreciated.
Regards,
Sreekanthhi All,
i have written a new print program for smart form and have assigned it to zoutput type.
The print preview and spool are perfectly fine.
when i give the medium as external send, it is not sending any attachmnet to the external mail id i gave.
my code is as follows.
PERFORM set_print_param USING ls_addr_key
ls_dlv-land
CHANGING ls_control_param
ls_composer_param
ls_recipient
ls_sender
ret.
FORM SET_PRINT_PARAM USING IS_ADDR_KEY LIKE ADDR_KEY
IS_DLV-LAND LIKE VBRK-LAND1
CHANGING CS_CONTROL_PARAM TYPE SSFCTRLOP
CS_COMPOSER_PARAM TYPE SSFCOMPOP
CS_RECIPIENT TYPE SWOTOBJID
CS_SENDER TYPE SWOTOBJID
RET TYPE SY-SUBRC.
DATA: LS_ITCPO TYPE ITCPO.
DATA: LF_REPID TYPE SY-REPID.
DATA: LF_DEVICE TYPE TDDEVICE.
DATA: LS_RECIPIENT TYPE SWOTOBJID.
DATA: LS_SENDER TYPE SWOTOBJID.
LF_REPID = SY-REPID.
CALL FUNCTION 'WFMC_PREPARE_SMART_FORM'
EXPORTING
PI_NAST = NAST
PI_COUNTRY = IS_DLV-LAND
PI_ADDR_KEY = IS_ADDR_KEY
PI_REPID = LF_REPID
PI_SCREEN = XSCREEN
IMPORTING
PE_RETURNCODE = RET
PE_ITCPO = LS_ITCPO
PE_DEVICE = LF_DEVICE
PE_RECIPIENT = CS_RECIPIENT
PE_SENDER = CS_SENDER.
IF RET = 0.
MOVE-CORRESPONDING LS_ITCPO TO CS_COMPOSER_PARAM.
* CS_CONTROL_PARAM-NO_OPEN
* CS_CONTROL_PARAM-NO_CLOSE
CS_CONTROL_PARAM-DEVICE = LF_DEVICE.
CS_CONTROL_PARAM-NO_DIALOG = 'X'.
CS_CONTROL_PARAM-PREVIEW = XSCREEN.
CS_CONTROL_PARAM-GETOTF = LS_ITCPO-TDGETOTF.
CS_CONTROL_PARAM-LANGU = NAST-SPRAS.
* CS_CONTROL_PARAM-REPLANGU1
* CS_CONTROL_PARAM-REPLANGU2
* CS_CONTROL_PARAM-REPLANGU3
* CS_CONTROL_PARAM-STARTPAGE
ENDIF.
ENDFORM.
after this i am calling smart form with all the required parameters.
CALL FUNCTION gv_function
EXPORTING
control_parameters = ls_control_param
output_options = ls_composer_param
archive_index = toa_dara
archive_parameters = arc_params
mail_recipient = ls_recipient
mail_sender = ls_sender
user_settings = space
IMPORTING
JOB_OUTPUT_INFO = ls_job_info
TABLES
zmm_purord_at = zmm_purord_at
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
i am not getting any mail to the desired mail id.
Any pointers to this would be highly appreciated.
Regards,
Sreekanth -
How to send "SPOOL" on SAP MAil or external mail in background???
I tried using 'SO_DOCUMENT_REPOSITORY_MANAGER' function but it failed when I run it in background. I learned that it calls a screen at the middle of the process which needs user input to go on with the process.
Is there other way that I could send spool on SAPMail or external Mail in background??? Any suggesstions will be greatly appreciated.. thanx...see below sample function module, you can use in backgroud also
FUNCTION Z_SEND_MAIL_FOR_SPOOLLIST.
""Local interface:
*" IMPORTING
*" VALUE(SPOOLNUMBER) LIKE SY-SPONO DEFAULT SY-SPONO
*" VALUE(MAILNAME) LIKE SOOD1-OBJNAM DEFAULT 'NOTE'
*" VALUE(SUBJECT) LIKE SOOD1-OBJDES
*" VALUE(RECEPIENT) LIKE SY-UNAME OPTIONAL
*" VALUE(DLI) LIKE SOOS1-DLINAM OPTIONAL
*" TABLES
*" TEXT STRUCTURE SOLI OPTIONAL
*" EXCEPTIONS
*" ERROR
DATA: OBJECT_HD_CHANGE LIKE SOOD1 OCCURS 0 WITH HEADER LINE,
OBJPARA LIKE SELC OCCURS 0 WITH HEADER LINE,
RECEIVERS LIKE SOOS1 OCCURS 0 WITH HEADER LINE.
OBJECT_HD_CHANGE-OBJLA = SY-LANGU.
OBJECT_HD_CHANGE-OBJNAM = MAILNAME.
OBJECT_HD_CHANGE-OBJDES = SUBJECT.
OBJECT_HD_CHANGE-OBJSNS = 'F'.
OBJECT_HD_CHANGE-VMTYP = 'T'.
OBJECT_HD_CHANGE-SKIPS = 'X'.
OBJECT_HD_CHANGE-ACNAM = 'SP01'.
OBJECT_HD_CHANGE-OBJCP = 'X'.
RECEIVERS-RCDAT = SY-DATUM.
RECEIVERS-RCTIM = SY-UZEIT.
IF DLI IS INITIAL.
RECEIVERS-RECNAM = RECEPIENT.
RECEIVERS-RTUNAM = RECEPIENT.
ELSE.
RECEIVERS-RECNAM = DLI.
RECEIVERS-ADR_NAME = DLI.
RECEIVERS-RECESC = 'C'.
ENDIF.
RECEIVERS-SNDEX = 'X'. " Express-Mail
APPEND RECEIVERS.
OBJPARA-NAME = 'SPI'.
OBJPARA-LOW = SPOOLNUMBER.
APPEND OBJPARA.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
OBJECT_HD_CHANGE = OBJECT_HD_CHANGE
OBJECT_TYPE = 'RAW'
OWNER = SY-UNAME
TABLES
OBJCONT = TEXT
OBJPARA = OBJPARA
RECEIVERS = RECEIVERS
EXCEPTIONS
OTHERS = 01.
IF SY-SUBRC NE 0.
RAISE ERROR.
ENDIF.
ENDFUNCTION. -
Send Workitem to external mail ID and Execute?
Hi all,
I have requirement to send a WorkItem to Approvers External Mail ID and executes there.I have tried to send text mail to Approver's external mail id using Fm SO_NEW_DOCUMENT_SEND_API1.
It is working fine but how to send WI to external mail id?
Is there any way?
Regards,
ArpitaHi AC,
there is a way out for the problem which you have where the user doesnt want to put his SAP userid and pwd and wants him to take directly to the SAP screen.
For this you need to create a shortcut in your SAP logon pad for the transaction.
and since you want him/her to go directly to the tcode, you need to put an entry in your sapshortcut.ini
-pw "password"
So what this entry does is the moment user clicks the workitem in Outlook, it would directly take him to the t-code for which you have created the shortcut, without asking him/her credentials.
For your second issue, yes if 2 users get workitem, if any one reserves or executes the workitem, it automatically deletes from the other users SAP inbox.
Hope it helps.
Aditya -
How Sapscript form can be send by mail
Hello all,
I want to send a Sapscript form by mail.
I think it should first be converted to PDF form and than need to be send by mail.
I have created a z form which is a copy of standard for medruck and also have changed the standard program SAPFM06P. So I need to add functionality in z program so that i can send the sapscript form by mail.
Can any body let me know the complete process how can i do it?
ThanksHi,
Just follow the below code . I am giving the code which starts from OPEN_FORM. After that one submit program is there u can see the code.
*& Form display_layout
text
--> p1 text
<-- p2 text
FORM display_layout.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
device = 'PRINTER'
DIALOG = 'X'
form = 'YFIL_DUNN_01'
LANGUAGE = SY-LANGU
options = itcpo
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
canceled = 1
device = 2
form = 3
options = 4
unclosed = 5
mail_options = 6
archive_error = 7
invalid_fax_number = 8
more_params_needed_in_batch = 9
spool_error = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT i_tab INTO wa_tab.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = '531'
FUNCTION = 'SET'
TYPE = 'BODY'
window = 'MAIN'
IMPORTING
pending_lines = wa_tab.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
result = itcpp
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
OTHERS = 5.
IF sy-subrc = 0.
IF ( itcpp-userexit IS INITIAL AND
NOT itcpp-tdspoolid IS INITIAL ).
p_spool = itcpp-tdspoolid.
SUBMIT yfir_mailsend_pdf_attachment WITH p_spool = p_spool
WITH p_kunnr = p_kunnr.
ENDIF.
ENDIF.
ENDFORM. " display_layout
*& Form modify_duedate
text
--> p1 text
<-- p2 text
FORM modify_duedate.
SELECT SINGLE mat_rec_no
mat_rec_date FROM yfi_matno
INTO (v_mat_rec_no, v_mat_rec_date)
WHERE vbeln = wa_tab-vbeln.
CHECK sy-subrc EQ 0.
SELECT SINGLE zterm
FROM vbrk INTO v_zterm
WHERE vbeln EQ wa_tab-vbeln.
CHECK sy-subrc EQ 0.
SELECT SINGLE zdays
FROM yfi_payment INTO v_zdays
WHERE zterm EQ v_zterm.
IF sy-subrc EQ 0.
wa_tab-zfbdt_due = ( v_mat_rec_date + v_zdays ).
wa_tab-due_days = ( sy-datum - wa_tab-zfbdt_due ).
IF wa_tab-due_days LE 0.
wa_tab-due_days = 'N/A'.
ENDIF.
IF ( wa_tab-umskz = 'A' AND wa_tab-shkzg = 'H' ).
wa_tab-zfbdt = ' '.
wa_tab-zfbdt_due = ''.
wa_tab-due_days = ''.
ENDIF.
MODIFY i_tab FROM wa_tab INDEX sy-tabix.
CLEAR: v_mat_rec_no, v_mat_rec_date, v_zterm, v_zdays.
ENDIF.
ENDFORM. " modify_duedate
SUBMIT PROGRAM :
REPORT yfir_mailsend_pdf_attachment MESSAGE-ID yf.
*& Program Name : *
& Author :
*& Creation Date : *
*& Program Type : *
*& SAP Release : *
*& Description : *
*& Transport No : *
*& Transaction : *
*& Send document with OTF/ALI attachment from spool to externalreci-
*& pient. OTF/ALI document is converted to PDF/HTML format duringthe
*& SAPconnect send process.
*& This report serves as example documentation for the function
*& modules SO_NEW_DOCUMENT_ATT_SEND_API1 and SO_DOCUMENT_SEND_API1.
*& Following this example you should be able to develop your own
*& report to send documents with all kinds of attachments.
Creation of the entry for the compressed document
*& TABLES:
TABLES : kna1,
adr6.
*& INTERNAL TABLES:
***********PDF Declaration*******
DATA: BEGIN OF i_spool OCCURS 0,
rqident LIKE tsp01-rqident,
rqo1name LIKE tsp01-rqo1name,
rqclient LIKE tsp01-rqclient,
END OF i_spool.
*& VARIABLES :
DATA: client LIKE tst01-dclient,
name LIKE tst01-dname,
objtype LIKE rststype-type,
type LIKE rststype-type.
DATA: spoolno LIKE tsp01-rqident,
download TYPE c VALUE 'X', "AS CHECKBOX DEFAULT 'X',
p_file LIKE rlgrap-filename
VALUE 'C:\Invoice.pdf', "#EC NOTEXT
otf LIKE itcoo OCCURS 100 WITH HEADER LINE,
cancel,
pdf LIKE tline OCCURS 100 WITH HEADER LINE,
doctab LIKE docs OCCURS 1 WITH HEADER LINE,
numbytes TYPE i,
arc_idx LIKE toa_dara,
pdfspoolid LIKE tsp01-rqident,
jobname LIKE tbtcjob-jobname,
jobcount LIKE tbtcjob-jobcount,
is_otf.
Data Declaration
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
*objpack-head_start = 1.
*objbin = ' | '. APPEND objbin.
*DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
objpack-head_start = 1.
*& PARAMETERS:
PARAMETERS : p_spool LIKE tsp01-rqident NO-DISPLAY,
p_kunnr LIKE kna1-kunnr NO-DISPLAY.
*& M A I N P R O C E S S
*& START OF SELECTION.
START-OF-SELECTION.
SELECT SINGLE
adr6~addrnumber
adr6~smtp_addr
FROM adr6
INNER JOIN kna1
ON kna1~adrnr = adr6~addrnumber
INTO CORRESPONDING FIELDS OF adr6
WHERE kna1~kunnr = p_kunnr.
IF sy-subrc = 0.
Create receiver list
reclist-receiver = adr6-smtp_addr. "<-- customer address
reclist-rec_type = 'U'.
APPEND reclist.
ENDIF.
***Convert Spool request to PDF
PERFORM pdf_convert.
docdata-obj_name = 'MAIL_AEIW'.
docdata-obj_descr = 'Dunning'.
Main Text
objtxt = 'Hi,'.
APPEND objtxt.
objtxt = 'Dunning'.
APPEND objtxt.
objtxt = 'Regards'.
APPEND objtxt.
Write Packing List (Main)
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
APPEND objpack.
Create Message Attachment
Write Packing List (Attachment)
att_type = 'PDF'.
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
*objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-doc_size = tab_lines * 255.
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 1.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = 'Attached Document'.
APPEND objpack.
*check for not maintaining customer address
IF reclist IS INITIAL.
MESSAGE e000 WITH 'Please Maintain Customer e-Mail ID'.
LEAVE LIST-PROCESSING.
ELSE.
Send Message
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel.6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
OBJECT_PARB =
receivers = reclist
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ELSE.
WRITE 'Mail sent successfully'.
ENDIF.
ENDIF.
WRITE: / 'End of Program'.
*& Form pdf_convert
text
--> p1 text
<-- p2 text
FORM pdf_convert.
DATA: date1 LIKE sy-datum,
time1 LIKE sy-uzeit,
period1 LIKE tsp01-rqcretime.
date1 = sy-datum.
time1 = sy-uzeit.
date1 = date1 - 1.
CONCATENATE date1 time1 INTO period1.
SELECT rqident
rqo1name
rqclient FROM tsp01 INTO TABLE i_spool
WHERE rqowner = sy-uname AND
rqclient = sy-mandt AND
rqident = p_spool.
IF sy-subrc <> 0.
WRITE: / 'No Spool Request created today'(003)
COLOR COL_NEGATIVE.
EXIT.
ENDIF.
SORT i_spool DESCENDING BY rqident.
READ TABLE i_spool INDEX 1.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
authority = 'SP01'
client = i_spool-rqclient
name = i_spool-rqo1name
part = 1
IMPORTING
CHARCO =
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP =
SIZE =
STOTYP =
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4.
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = i_spool-rqident
no_dialog = ' '
DST_DEVICE =
PDF_DESTINATION =
IMPORTING
pdf_bytecount = numbytes
pdf_spoolid = pdfspoolid
OTF_PAGECOUNT =
btc_jobname = jobname
btc_jobcount = jobcount
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_dstdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
CASE sy-subrc.
WHEN 0.
WHEN 1.
WRITE: / 'Error On Spool Job'(002)
COLOR COL_NEGATIVE.
EXIT.
WHEN 2.
WRITE: / 'No Permission'(003)
COLOR COL_NEGATIVE.
EXIT.
WHEN 3.
WRITE: / 'Conversion Not Possible'(004)
COLOR COL_NEGATIVE.
EXIT.
WHEN OTHERS.
WRITE: / 'Incorrect Destination Device'(005)
COLOR COL_NEGATIVE.
EXIT.
ENDCASE.
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
EXPORTING
line_width_src = 134
line_width_dst = 255
TABLES
content_in = pdf
content_out = objbin
EXCEPTIONS
err_line_width_src_too_long = 1
err_line_width_dst_too_long = 2
err_conv_failed = 3
OTHERS = 4.
ENDFORM. " pdf_convert -
External Mail's Sending Via Abap Code
<u>Hello, everyone.</u>
I have a problem with an external mail's sending, I have to solve it very quickly.
I'm tring to send mail to a specific address with an attachment but it doesn't work.
Does any one has some source code that works (with file attached) ?
Thanks in advance,
RebekaHi rebeka,
1. There is some trick involved
in the binary files.
2. I have made a program (and it works fantastic)
ONLY 6 LINES FOR EMAILING
BELIEVE ME
ITS A FANTASTIC PROGRAM.
IT WILL WORK LIKE OUTLOOK EXPRESS !
3. The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
amit m. -
Sending of GR & GI slips through external mail
Hi All,
Kindly suggest me, to achieve following client requirement.
The requirement is to send the GR and GI slips through external mail to "Goods Recipient" for MIGO transaction.
Many thanks,
VenkatYou might want to use the message type MLGR (mail at goods receipt), but
this message type will only work with the Message transmission medium 7
(SAPoffice) and the processing routines:
Program : RSNASTSO
FORM routine: SAPOFFICE_AUFRUF
this is, unfortunately, you will be unable to send out an external
mail (transmission medium 5) to your vendor using the message type MLGR.
For a message type MLGR to be outputed, it is necessary to flag in the
Purchase Order Header the 'Goods receipt message' indicator (EKKO-WEAKT)
and, as you can read in the F1-on-line help for this indicator:
"Indicator: Goods receipt message
Indicator specifying that the system is to issue an appropriate message
to the buyer following each goods receipt in respect of this purchase
order".
Therefore, the system has been designed to send an internal e-mail to
the User ID who created the purchase order (buyer). This is made via
SAPoffice and medium 7. However, the system has not been designed to
send an external e-mail to the vendor.
You can also check the IMG Activity Documentation for the activity
'Output Determination' under the path:
SPRO
-> Materials Management
-> Inventory Management and Physical Inventory
-> Output Determination
"Output Determination
In Inventory Management, output is text that is created at the time of
goods movements. There are output documents such as:
.- goods receipt/issue slips ( example, GR/GI slips, pallet slips)
.- labels
.- kanban cards
.- MAIL messages which Inventory Management uses to communicate with
other departments (purchasing or materials planning, for example).
Note:
In the case of a goods receipt for a purchase order, MAIL messages are
sent to purchasing in two cases:
.- if Purchasing has set the indicator "GR output" in the purchase
order,
.- if an order price quantity has been entered at the time of a goods
receipt which lies outside the tolerances (for a warning message).
In the case of a goods receipt of missing parts, a mail message is sent
to the MRP controller if the missing parts check is active for the
plant.
The standard system contains all settings for this output. You only
have to maintain the mail texts for the following output types:
MLGR (GR message)
MLMD (GR quantity variance)
MLFH (goods receipt of missing part)".
Therefore:
1.- MAIL messages within Inventory Management are used to communicate
with other departments (purchasing or materials planning, for
example), but not to send out information to vendors.
2.- MLGR (GR message) are sent out to the Purchasing department only
when the indicator "GR Message" has been set in the purchase order. -
How to send sapmails to external mail systems
Hi,
how to send sapmails to external mail systems....
like if we want to mail a purchase order from SAP System to *@yahaoo.com or @.com.
TY.hi manish,
u can do it.
chk this .
chk this code
DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
*& Form f_send_mail
text
--> p1 text
<-- p2 text
FORM f_send_mail .
*store the vendor name, vendor email id , employee name and employee
*email id in the internal table int_crb
Creation of the document to be sent
CLEAR doc_chng.
REFRESH objpack.
REFRESH objhead.
REFRESH reclist.
REFRESH objtxt.
File Name
doc_chng-obj_name = 'SHIPMENT'.
Mail Subject
CONCATENATE 'Shipment Document No.' int_crb_mail-shipdocnum
'Cleared.'
INTO doc_chng-obj_descr SEPARATED BY ' '.
Mail Contents
objtxt-line = 'Hi,'.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
CONCATENATE 'Shipment Document Number ' int_crb_mail-shipdocnum
' cleared for move.' INTO objtxt-line SEPARATED BY ' '.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
CLEAR objtxt.
objtxt-line = 'Regards '.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
objtxt-line = 'SAP '.
APPEND objtxt.
CLEAR objtxt.
APPEND objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN(
objtxt ).
Creation of the entry for the compressed document
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
APPEND objpack.
Completing the recipient list
target recipent
CLEAR reclist.
reclist-receiver = int_crb_mail-empperid. "employee email ID
"wf_empperid.
reclist-express = 'X'.
reclist-rec_type = 'U'.
APPEND reclist.
copy recipents
CLEAR reclist.
reclist-receiver = int_crb_mail-smtp_addr."vendor email id
reclist-express = 'X'.
reclist-rec_type = 'U'.
reclist-copy = 'X'.
APPEND reclist.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
COMMIT WORK.
SUBMIT rsconn01
WITH mode = 'INT'
WITH output = ' '
AND RETURN.
ENDFORM. " f_send_mail
for any clarifiaction pls mail me.
pls reward points, if this helped u.
regards,
anversha.
[email protected] -
Send External mail with Attchment from SAP
Hi All,
OUR REQUIREMENT: We need to send EXTERNAL MAIL with ATTACHMENT(Excel) form SAP .
We have developed a function module which converts the internal table data into Excel Format and sends it as an attachment to External Mail.
ISSUE : But our issue is we are unable to open that document using GOOGLE DOCS Could any one help me how to do this.
it was thriughing error like
Error log is .
''Sorry, we are unable to generate a view of the document at this time. Please try again later.
You can also try to download the original document by clicking here. Alternatively, you can view the plain HTML (automatically redirecting).
Regards
Venkat .
Edited by: venkata pradeep on Mar 5, 2012 10:26 AM
Edited by: venkata pradeep on Mar 5, 2012 10:28 AMIs the excel file recognized by MS Excel? If not, then issue is you have wrongly converted your attachment and/or your FM to create an excel file was wrongly coded or you have passed it wrongly to your mail code.
If you consider an OOP approach in sending external mail, refer to this link:
http://wiki.sdn.sap.com/wiki/display/Snippets/SendingmailwithattachmentusingObjectOriented+Approach -
Sending external mail with excel attachment from SAP
Hi All,
I am trying to send a external mail from SAP. Mail is getting posted correctly with attachment having type excel. If attach file has more than 1 records then in mail it is coming in a single lines. it is not getting wrap.
e.g. my attach internal table has records like LINE1
LINE2
LINE3
output in attach excel file is : LINE1 LINE2 LINE3
in attach file it should come line by line.
source code of my function module is as follows :
FUNCTION ZXI_SEND_MAIL_WITH_ATTACHMENT.
""Local Interface:
*" IMPORTING
*" REFERENCE(SUBJECT) TYPE SO_OBJ_DES OPTIONAL
*" REFERENCE(ATTACH_NAME1) TYPE SOOD-OBJDES
*" REFERENCE(EXT1) TYPE SOODK-OBJTP
*" REFERENCE(MAIL_ID) TYPE ADR6-SMTP_ADDR
*" TABLES
*" IT_CONTENT TYPE SOLI_TAB OPTIONAL
*" IT_ATTACH TYPE SOLI_TAB OPTIONAL
DATA: send_request TYPE REF TO cl_bcs.
DATA: document TYPE REF TO cl_document_bcs.
DATA: sender TYPE REF TO cl_sapuser_bcs.
DATA: recipient TYPE REF TO if_recipient_bcs.
DATA: exception_info TYPE REF TO if_os_exception_info,
bcs_exception TYPE REF TO cx_document_bcs.
DATA i_attachment_size TYPE sood-objlen.
Creates persistent send request
send_request = cl_bcs=>create_persistent( ).
TRY.
*****Create txt mail document**************************
document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = it_content[]
i_subject = subject ).
**************Creates Attachment 1***********************
CALL METHOD document->add_attachment
EXPORTING
i_attachment_type = ext1
i_attachment_subject = attach_name1
i_att_content_text = it_attach[].
Add document to send request
CALL METHOD send_request->set_document( document ).
Get sender object
sender = cl_sapuser_bcs=>create( sy-uname ).
Add sender
CALL METHOD send_request->set_sender
EXPORTING
i_sender = sender.
recipient = cl_cam_address_bcs=>create_internet_address(
i_address_string = mail_id ).
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'U'
i_copy = ' '
i_blind_copy = ' '
i_no_forward = ' '.
**********Trigger e-mails immediately****************************
send_request->set_send_immediately( 'X' ).
CALL METHOD send_request->send( ).
COMMIT WORK.
CATCH cx_document_bcs INTO bcs_exception.
ENDTRY.
ENDFUNCTION.
please suggest me a solution and thanks in advance.
Thanks&Regards,
SachinSee the sample code for sending attachment as Mail
Mailing with Attachment by ABAP Coding
Refer this link:
Mail with attachment.
FORM send_list_to_basis .
DATA: w_path LIKE rlgrap OCCURS 0 WITH HEADER LINE,
lt_index TYPE sy-tabix,
doc_type(3) TYPE c,
descr LIKE it_objpack_basis-obj_descr,
temp_data LIKE w_path,
temp1 TYPE string,
tab_lines TYPE i,
langu(15) TYPE c,
expirydate TYPE so_obj_edt,
L_FILE1(100).
CONCATENATE 'C:\' sy-repid '_' sy-datum '.XLS' INTO L_FILE1.
W_PATH-FILENAME = L_FILE1.
APPEND w_path.
CLEAR w_path.
wa_doc_chng-obj_descr = 'User List not logged on for 180 days'.
wa_doc_chng-obj_langu = 'E'.
wa_doc_chng-obj_expdat = sy-datum.
CLEAR w_subject.
CONCATENATE 'Please find attached document with list of users'
'not logged on for 180 days for client' sy-mandt
INTO w_subject SEPARATED BY space.
it_objtxt_basis-line = w_subject.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
it_objtxt_basis-line = text-004.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
CLEAR w_tab_line.
DESCRIBE TABLE it_objtxt_basis LINES w_tab_line.
READ TABLE it_objtxt_basis INDEX w_tab_line INTO l_cline.
wa_doc_chng-doc_size =
( w_tab_line - 1 ) * 255 + STRLEN( l_cline ).
CLEAR it_objpack_basis-transf_bin.
it_objpack_basis-head_start = 1.
it_objpack_basis-head_num = 0.
it_objpack_basis-body_start = 1.
it_objpack_basis-body_num = w_tab_line.
it_objpack_basis-doc_type = 'RAW'.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
LOOP AT w_path.
temp1 = w_path.
descr = w_path.
CALL FUNCTION 'STRING_REVERSE'
EXPORTING
string = descr
lang = 'E'
IMPORTING
rstring = descr.
CALL FUNCTION 'STRING_SPLIT'
EXPORTING
delimiter = '\'
string = descr
IMPORTING
head = descr
tail = temp_data.
CALL FUNCTION 'STRING_REVERSE'
EXPORTING
string = descr
lang = 'E'
IMPORTING
rstring = descr.
CALL FUNCTION 'STRING_SPLIT'
EXPORTING
delimiter = '.'
string = descr
IMPORTING
head = temp_data
tail = doc_type.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = temp1
filetype = 'BIN'
header_length = 0
read_by_line = 'X'
replacement = '#'
TABLES
data_tab = it_upload.
DESCRIBE TABLE it_upload LINES tab_lines.
DESCRIBE TABLE it_objbin_basis LINES lt_index.
lt_index = lt_index + 1.
LOOP AT it_upload.
wa_objbin_basis-line = it_upload-line.
APPEND wa_objbin_basis TO it_objbin_basis.
CLEAR wa_objbin_basis.
ENDLOOP.
it_objpack_basis-transf_bin = 'X'.
it_objpack_basis-head_start = 0.
it_objpack_basis-head_num = 0.
it_objpack_basis-body_start = lt_index.
it_objpack_basis-body_num = tab_lines.
it_objpack_basis-doc_type = doc_type.
it_objpack_basis-obj_descr = descr.
it_objpack_basis-doc_size = tab_lines * 255.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
ENDLOOP.
it_reclist_basis-receiver = '[email protected]'.
it_reclist_basis-rec_type = 'U'.
APPEND it_reclist_basis.
CLEAR it_reclist_basis.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = it_objpack_basis
contents_txt = it_objtxt_basis
contents_bin = it_objbin_basis
receivers = it_reclist_basis
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
IF sy-subrc EQ 0.
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
ENDFORM. " send_list_to_basis
Reward points if useful
Regards
Anji
Maybe you are looking for
-
My support team Sending meeting request for group of users . Problem is who are using Ex2010 / 2013 they are getting Meeting request like on printshot 1 : It means they are getting details for when and where option. Where on printshot2 that is corre
-
Message not working on Maverick OS X10.9.1
I am running OS X 10.9.1 (Maverick) and cannot get Messages to work. The version I have of Message is 8.0 (4218). Can anybody help fix this?
-
If I bought ipad air wifi with cellular version, can I insert my sim card of iphone5?
-
SQLite micro-optimization based on LiveDocs unclear
This article on Livedocs says you should add the database name in front of tables. http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118666ade46-7d47. html My question is, should I do that everywhere where a table name appears
-
As I said in the object, I can't update mesa. I'm using kde x86_64. To update the system I modified pacman.conf to ignore the update of mesa, then downloaded it from my mirror and installed manually with pacman -U. At the end, a good pacman -Syu work