Corrupt file attachment when sending sapscript form by mail
i have requirment to send sapscript through mail but when open my attachment it is giving file is corrupted.let me know where i am wrong
i am specifying the code here
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
* MAX_LINEWIDTH = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
* PDF_DELETE_OTFTAB = ' '
* PDF_USERNAME = ' '
IMPORTING
bin_filesize = binfilesize
* BIN_FILE =
TABLES
otf = datab[]
lines = pdftab[]
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH it_pdf[].
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
EXPORTING
line_width_dst = '255'
TABLES
content_in = pdftab[]
content_out = it_pdf[]
EXCEPTIONS
err_line_width_src_too_long = 1
err_line_width_dst_too_long = 2
err_conv_failed = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
"Subject of the mail.
w_document_data-obj_name = 'MAIL_TO_HEAD'.
w_document_data-obj_descr = 'Regarding Mail Program by SAP ABAP'.
"Body of the mail
w_body_msg = 'This is body of mail msg.'.
APPEND w_body_msg TO i_body_msg.
CLEAR w_body_msg.
"Write Packing List for Body
DESCRIBE TABLE i_body_msg LINES g_tab_lines.
w_packing_list-head_start = 1.
w_packing_list-head_num = 0.
w_packing_list-body_start = 1.
w_packing_list-body_num = g_tab_lines.
w_packing_list-doc_type = 'RAW'.
APPEND w_packing_list TO i_packing_list.
CLEAR w_packing_list.
"Write Packing List for Attachment
w_packing_list-transf_bin = 'X'.
w_packing_list-head_start = 1.
w_packing_list-head_num = 0.
w_packing_list-body_start = 1.
DESCRIBE TABLE it_pdf LINES w_packing_list-body_num.
w_packing_list-doc_type = 'PDF'.
w_packing_list-obj_descr = 'PDF Attachment'.
w_packing_list-obj_name = 'PDF_ATTACHMENT'.
w_packing_list-doc_size = w_packing_list-body_num * 255.
APPEND w_packing_list TO i_packing_list.
CLEAR w_packing_list.
"Fill the document data and get size of attachment
w_document_data-obj_langu = sy-langu.
READ TABLE i_body_msg INTO w_body_msg INDEX g_tab_lines.
w_document_data-doc_size = ( g_tab_lines - 1 ) * 255 + STRLEN( w_body_msg ).
"Receivers List.
w_receivers-rec_type = 'U'."Internet address
w_receivers-receiver = p_mail.
w_receivers-com_type = 'INT'.
w_receivers-notif_del = 'X'.
w_receivers-notif_ndel = 'X'.
APPEND w_receivers TO i_receivers .
CLEAR:w_receivers.
"Function module to send mail to Recipients
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_document_data
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
sent_to_all = g_sent_to_all
TABLES
packing_list = i_packing_list
contents_bin = it_pdf
contents_txt = i_body_msg
receivers = i_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
MESSAGE 'Mail Successfully Sent' type 'S'.
ENDIF.
Edited by: sam_ins123524 on Oct 8, 2010 9:31 AM
Edited by: sam_ins123524 on Oct 8, 2010 9:33 AM
Moderator message: subject corrected for you, please use a more descriptive one next time, also use code tags.
Edited by: Thomas Zloch on Oct 8, 2010 10:51 AM
Hi,
Once you get otf data, Use FM 'SX_OBJECT_CONVERT_OTF_PDF' to convert it to PDF. Then use CONTENT_BIN to send mail.
Refer below code:
* Converting OTF data to single line
LOOP AT I_OTF INTO WA_OTF.
CONCATENATE WA_OTF-TDPRINTCOM WA_OTF-TDPRINTPAR INTO WA_PDF.
MOVE WA_PDF TO WA_CONTENT_TXT.
APPEND WA_CONTENT_TXT TO I_CONTENT_TXT.
CLEAR: WA_CONTENT_TXT.
ENDLOOP.
* Converting to PDF Format
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
FORMAT_SRC = C_OTF
FORMAT_DST = C_PDF
DEVTYPE = C_PRINTER
CHANGING
TRANSFER_BIN = WA_TRANSFER_BIN
CONTENT_TXT = I_CONTENT_TXT
CONTENT_BIN = I_CONTENT_BIN
OBJHEAD = WA_OBJHEAD
LEN = V_LEN_IN.
*- Send mail
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = L_WA_DOCUMENT_DATA
TABLES
OBJECT_CONTENT = I_CONTENT_BIN
RECEIVERS = L_I_RECEIVERS.
Similar Messages
-
Has anyone experienced Apple Mail flattening .PSD file attachment when sending?
One of my students encountered the case when Apple Mail flattens .PSD file when sending an attachment.
Running latest Mac OS X 10.6.2 (10C540) Mail Version 4.2 (1077). Multi layered .PSD file 120K was saved on desktop and than attached to email. None of the Adobe applications were running at that time. After it was sent, the attached file in Send mail folder was flattened and it size dropped to 88K.
The flattened file was sent to destination. Although we could not reproduce this problem on the other computers, it always happens on this particular machine.
When the problem was reported to Apple, the answer from engineers was more disturbing than the problem itself.
They said "... it is OK to flatten the file to reduce the size of attachment when sending. It is expected email behavior". I am very troubled by this attitude from Apple. Flattening the image discards information contained in individual layers. This is actually EDITING the contents of an attachment when sending it.
Has anyone experience this problem? Also, I would appreciate feedback on Apple's position that it is OK to edit attachments when sending them withou asking the user first.Marian,
I'm afraid you have missed the point. People send binary files via email all the time: images, video and music clips - in fact any attachment is a binary file. Underlying protocols are implementation details, a mail client may choose any form of encoding/encryption to send an attachment. However, the internet standard requires that an attached file is delivered exactly as it was sent, mail clients/servers are not allowed to take upon themselves to "optimize" attachments without the end user knowledge and permission. It creates a dangerous precedent. In this particular case my photography student had no way of knowing that for whatever reason his particular setup would flatten the image and ruin his homework.
Also, none of the protocols: FTP, SMTP or HTTP is inherently binary or MIME encoded, it depends on the settings and implementation ( Check RFC's)
I am not asking for a work around, which is trivial. I am simply trying find how serious is the problem. This is not a normal behavior, I know for certain only about two cases when it happens. With such a rare occurrence it seem to be a bug rather than a feature. That is why Apple reaction to is so surprising.
Sergei Petrov
http://spandas.com -
Sending sapscript form to an external mail
i need to send sapscript form to an external mail like for example a yahoo mail from SAP. i need an ABAP code that performs this function. its urgent, please
1) REPORT PROGRAM - RSTXPDFT4 ,
FIRST GENERATE SPOOL REQUEST THEN DOWNLOAD SAPSCRIPT TO PDF FILE ON LOCAL PC.
2) copy this code to send this downloaded form to external mail -
*& Report ZGILL_SENDMAIL_PDF *
REPORT ZGILL_SENDMAIL_PDF .
INCLUDE ZGILL_INCMAIL. "SEE BELOW FOR INCLUDE PROGRAM CODE.
* DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
* SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case DEFAULT '[email protected]'.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY DEFAULT 'C:TEMPSALARY_SLIP1.PDF'.
* AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
* START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
* FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
* CHECK_DOS_FORMAT =
IMPORTING
* DRIVE =
EXTENSION = extension
NAME = name
* NAME_WITH_EXT =
* PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
**********************iNCLUDE pROGRAM*********************************************
*& Include ZGILL_INCMAIL *
* Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
* FORM
FORM ml_customize USING objname objdesc.
*----------- Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
*--------- Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
* FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
* FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
* FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
*--------- Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
* IMPORTING
* COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
* Header Data
* Already Done Thru FM
* Main Text
* Already Done Thru FM
* Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
* Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
* Receiver List
* Already done thru fm
ENDFORM. "ml_prepare
* FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
* CONTENTS_HEX = objhex
* OBJECT_PARA =
* object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
* FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
*-------------- Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
*------------- Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
* FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
*-------- Data
DATA : pos TYPE i.
DATA : len TYPE i.
*------------ Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
***********************INCLUDE END********************************* -
Sending sapscript form by email
dear experts
i want to send sapscript forms by email from sap. how is it done. is there any configuration that needs to be doneHello,
I have done in case where we are sending to an external mail id.
Check the code it may help u.
REPORT Z_SCRIPT .
DATA: itcpo LIKE itcpo,
tab_lines LIKE sy-tabix.
Variables for EMAIL functionality
DATA: maildata LIKE sodocchgi1.
DATA: mailpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: mailhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: mailbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailrec LIKE somlrec90 OCCURS 0 WITH HEADER LINE.
DATA: solisti1 LIKE solisti1 OCCURS 0 WITH HEADER LINE.
PERFORM send_form_via_email.
FORM SEND_FORM_VIA_EMAIL *
FORM send_form_via_email.
CLEAR: maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
REFRESH: mailtxt, mailbin, mailpack, mailhead, mailrec.
Creation of the document to be sent File Name
maildata-obj_name = 'TEST'.
Mail Subject
maildata-obj_descr = 'Subject'.
Mail Contents
mailtxt-line = 'Here is your file'.
APPEND mailtxt.
Prepare Packing List
PERFORM prepare_packing_list.
Set recipient - email address here!!!
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
APPEND mailrec.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = maildata
put_in_outbox = ' '
TABLES
packing_list = mailpack
object_header = mailhead
contents_bin = mailbin
contents_txt = mailtxt
receivers = mailrec
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
ENDFORM.
Form PREPARE_PACKING_LIST
FORM prepare_packing_list.
CLEAR: mailpack, mailbin, mailhead.
REFRESH: mailpack, mailbin, mailhead.
DESCRIBE TABLE mailtxt LINES tab_lines.
READ TABLE mailtxt INDEX tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
Creation of the entry for the compressed document
CLEAR mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
APPEND mailpack.
Creation of the document attachment
This form gets the OTF code from the SAPscript form.
If you already have your OTF code, I believe that you may
be able to skip this form. just do the following code, looping thru
your SOLISTI1 and updating MAILBIN.
PERFORM get_otf_code.
LOOP AT solisti1.
MOVE-CORRESPONDING solisti1 TO mailbin.
APPEND mailbin.
ENDLOOP.
DESCRIBE TABLE mailbin LINES tab_lines.
mailhead = 'TEST.OTF'.
APPEND mailhead.
Creation of the entry for the compressed attachment
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'OTF'.
mailpack-obj_name = 'TEST'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
APPEND mailpack.
ENDFORM.
Form GET_OTF_CODE
FORM get_otf_code.
DATA: BEGIN OF otf OCCURS 0.
INCLUDE STRUCTURE itcoo .
DATA: END OF otf.
DATA: itcpo LIKE itcpo.
DATA: itcpp LIKE itcpp.
CLEAR itcpo.
itcpo-tdgetotf = 'X'.
Start writing OTF code
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'Z08V3_COLLI'
language = sy-langu
options = itcpo
dialog = ' '
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'START_FORM'
EXCEPTIONS
error_message = 01
OTHERS = 02.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
window = 'MAIN'
EXCEPTIONS
error_message = 01
OTHERS = 02.
Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
EXCEPTIONS
error_message = 01
OTHERS = 02.
MOVE-CORRESPONDING itcpo TO itcpp.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
result = itcpp
TABLES
otfdata = otf
EXCEPTIONS
OTHERS = 1.
Move OTF code to structure SOLI form email
CLEAR solisti1. REFRESH solisti1.
LOOP AT otf.
solisti1-line = otf.
APPEND solisti1.
ENDLOOP.
ENDFORM.
I am sending to [email protected].
So proceed in similar manner and let me know if u face any problem.
Regards -
Attach picture in SAPSCRIPT form
Hi, do anyone know how to attach picture in SAPSCRIPT form?
Pls guide step by step or provide code example .
Thanks.If I want to attach graphic/pic dynamically to Vendor in RFQ (Request for Quotation) print form, how to attach?
FYI, I develop RFQ in sapscript form.
Thanks. -
Where XML and related file belong when send from FCP to Color?
Hi(Bonjour)!
Where XML and related file belong when send from FCP to Color?
I want to start a fresh project and delete all previous tests.
Michel BoissonneaultHi(Bonjour)!
I messed up with preference for home directory.
Thank you.
Michel Boissonneault -
When I click attach when sending an email with an attachment I get a dropdown that says "single image" or "default multiple". I choose one. Nothing happens as far as offering a choice as to what doc or photo to attach. I continue between the attach and attachment and still nothing .What do i need to do?
Hmmm, Permissions are messed up somewhere!?
Can you open to pic say in Preview, select All, Copy, 7 Paste into Mail? -
When sending email from the Mail App or through other Apps on my iPad, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design, especially since I had already checked the From: address.
iPad 4 running iOS 8.1.33rd party email addresses have to be deleted on every synmced mac product, although I have 1and1.co.uk and my imac updatetes the mails in that account from mac mail.
Yahoo etc is a 2 step deleting process but good to get your emails pushed when on the go.
LJ
http://www.facebook.com/The.Cowboy.Party -
Adobe PDF-based print forms - how to send pdf-form by mail?
Hello All.
I have created a PDF-form and now I want to send the form by mail without
seeing it on my screen first. I want it to be done in the backround.
I'm not using java/abap web dynpro.
Can somebody help me with this?
Thanks, Barak.hi
good
go through this link hope this would help you solve your problem
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8cd6adbb-0301-0010-39ba-938c601d5db9
reward point if helpful.
thanks
mrutyun^ -
How can I request a return receipt when sending email from Leopard Mail?
Has anyone found a way to request return receipts when sending email with Leopard Mail?
see this [link|http://discussions.apple.com/thread.jspa?messageID=7244096�].
However,
this is only possible if the email client of the e-mail receiver supports this feature and it is turned on. if it doesn't support it or it supports it but the feature is turned off there is absolutely nothing you can do. -
Files corrupting when sending email attachments from Mail & Thunderbird
Hi All
I'm hoping that someone will be able to help here as this problem is driving me crazy!
Most if not all of my email attachments are corrupting when sending from Apple Mail and Thunderbird. I'm also having issues with publishing files via FTP from Rapidweaver 5! I have spoken to BT about the issue but they have tested the line and say everything is OK.
The strange thing is, it's happening on my MacBook Pro (Mountain Lion) and my Mac Pro (Lion). The problem's also happen when I'm using a friends high speed internet connection so that only leaves the server. I'm really out of my depth with the server side of things though. I did have a reply from Servage (my hosting company) who said I may have been the subject of a hack and an upload script!! Not sure what this means or how to check if this is the case. One question though, would this corrupt email attachments as well as uploading to the server?
Many thanks
MarkFurther to the above: I have now found that the same corruption happens when I email attachments and FTP from my PC laptop, so this rules out a computer issue. I have also swapped wireless routers and exactly the same problem. As mentioned above, I don't get the corruption when using another internet connection.
Also, I have an iPhone which I've restored to factory default settings and when I take a photo with the phone and email it (using my home wireless network), the file corrupts, everytime.
Using services such as YouSendIt and WeTransfer, gives the same problems!
I'm desperate for help on this one and I'd even pay someone to resolve it! -
I can't get the file attachment in a web form to work
I have a web form made in Business Catalyst that I'm having some problems with. I have added a file attachment option, but I can't get this to work properly.
When a user chooses a file and sends the form, the message that is being sent includes the name of the file that was attached, but not the file itself! What am I doing wrong?
This is the web form (in Norwegian, but you get the idea of where the file upload is) In this form, the file "produktark_plusstjenester.pdf" has been attached.
The e-mail that is being sent now looks like this (I have removed the private information). But as you can see, it mentions the file produktark_plusstjenester.pdf (94,45 kb), but it is not attached in the e-mail itself.
Hope someone can clarify this for meFile on web forms is attached to the case. Go to the case in the admin and you can retrieve the file.
-
Sending sapscript form through Email
Hi,
I modifyed a std sapscript form for customer statement and that output i want to send to the customer through Email.So now i need a help for further what are the steps need to be do for sending that form by email.Pls be in details so that for me easy to solve this.
Thanks,
Rajendra.Hi ,
I am using the below code to send the form output by mail but it is not working for me.pls correct my code where i want to change so that i can solve my issues.
DATA: itcpo LIKE itcpo,
tab_lines LIKE sy-tabix.
Variables for EMAIL functionality
DATA: maildata LIKE sodocchgi1.
DATA: mailpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: mailhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: mailbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailrec LIKE somlrec90 OCCURS 0 WITH HEADER LINE.
DATA: solisti1 LIKE solisti1 OCCURS 0 WITH HEADER LINE.
parameter: p_email1 like somlreci1-receiver .
PERFORM send_form_via_email.
FORM SEND_FORM_VIA_EMAIL *
FORM send_form_via_email.
CLEAR: maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
REFRESH: mailtxt, mailbin, mailpack, mailhead, mailrec.
Creation of the document to be sent File Name
maildata-obj_name = 'TEST'.
Mail Subject
maildata-obj_descr = 'Subject'.
Mail Contents
mailtxt-line = 'Here is your file'.
APPEND mailtxt.
Prepare Packing List
PERFORM prepare_packing_list.
Set recipient - email address here!!!
mailrec-receiver = p_email1.
mailrec-rec_type = 'U'.
APPEND mailrec.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = maildata
put_in_outbox = ' '
TABLES
packing_list = mailpack
object_header = mailhead
contents_bin = mailbin
contents_txt = mailtxt
receivers = mailrec
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
ENDFORM.
Form PREPARE_PACKING_LIST
FORM prepare_packing_list.
CLEAR: mailpack, mailbin, mailhead.
REFRESH: mailpack, mailbin, mailhead.
DESCRIBE TABLE mailtxt LINES tab_lines.
READ TABLE mailtxt INDEX tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
Creation of the entry for the compressed document
CLEAR mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
APPEND mailpack.
Creation of the document attachment
This form gets the OTF code from the SAPscript form.
If you already have your OTF code, I believe that you may
be able to skip this form. just do the following code, looping thru
your SOLISTI1 and updating MAILBIN.
PERFORM get_otf_code.
LOOP AT solisti1.
MOVE-CORRESPONDING solisti1 TO mailbin.
APPEND mailbin.
ENDLOOP.
DESCRIBE TABLE mailbin LINES tab_lines.
mailhead = 'TEST.OTF'.
APPEND mailhead.
Creation of the entry for the compressed attachment
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'OTF'.
mailpack-obj_name = 'TEST'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
APPEND mailpack.
ENDFORM.
Form GET_OTF_CODE
FORM get_otf_code.
DATA: BEGIN OF otf OCCURS 0.
INCLUDE STRUCTURE itcoo .
DATA: END OF otf.
DATA: itcpo LIKE itcpo.
DATA: itcpp LIKE itcpp.
CLEAR itcpo.
itcpo-tdgetotf = 'X'.
Start writing OTF code
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'Z2006FICSE'
language = sy-langu
options = itcpo
dialog = ' '
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'START_FORM'
EXCEPTIONS
error_message = 01
OTHERS = 02.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
window = 'MAIN'
EXCEPTIONS
error_message = 01
OTHERS = 02.
Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
EXCEPTIONS
error_message = 01
OTHERS = 02.
MOVE-CORRESPONDING itcpo TO itcpp.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
result = itcpp
TABLES
otfdata = otf
EXCEPTIONS
OTHERS = 1.
Move OTF code to structure SOLI form email
CLEAR solisti1. REFRESH solisti1.
LOOP AT otf.
solisti1-line = otf.
APPEND solisti1.
ENDLOOP.
ENDFORM.
Hope i can expect the feedback soon from you guys.
Thanks,
Rajendra. -
File Attachment field on web form
Hello all
A really simple question but I cant seem to work it out. I have added a file attachment field to a web form but when somebdy uploads a image using this form my client does not get the file. I assumed it would go to his email but this does not seem to be the case? Is there a way that I can direct this files to a location or email account?
Any info would be great
regards
MartinBecause of the posibility of big files (up to 100mb) being stored sending those through emails is basiclaly not possible for the most part - they are emails. Even Google Gmail has a top out of 25mb which is bigger then most.
The file is stored agaisnt the case in the system. The file in the workflow mentioned should at least be a link you click through to get the file via the admin. If not you click the case link and get it in there anyway. -
Facing problem with logo in the PDF attachment when sending mail...
hi friends,
i'm facing problem with logo in the PDF attachment to the mail.
my requirement:
1. enter spool number and mail id in the selection screen.
process:
1. now the program will fetch the spool data and converts it to PDF.
2. but when i'm trying to send mail with this PDF as attachment.
when i open the PDF file from the mail, logo is not coming properly (looks disturbed).
can anyone help me how to resolve this issue...
thanks in advance, murashali.hi dinakar, thanks for your mail...
logo looks good in spool/script/smartform.
even it look good when i download this spool to pdf and to the presentation server as pdf file.
i'm using CONVERT_OTFSPOOLJOB_2_PDF.
when i used CONVERT_ABAPSPOOLJOB_2_PDF, is gives a msg - 'spool number not found'.
here i'm using folloing code to pass pdf to the function module: SO_NEW_DOCUMENT_ATT_SEND_API1.
code:
Transfer the 132-long strings to 255-long strings
lt_mtab_pdf[] = pdf[].
LOOP AT lt_mtab_pdf INTO lwa_mtab_pdf.
TRANSLATE lwa_mtab_pdf USING ' ~'.
CONCATENATE lv_gd_buffer lwa_mtab_pdf INTO lv_gd_buffer.
CLEAR lwa_mtab_pdf.
ENDLOOP.
TRANSLATE lv_gd_buffer USING '~ '.
DO.
lwa_mess_att = lv_gd_buffer.
APPEND lwa_mess_att TO lt_mess_att.
CLEAR lwa_mess_att.
SHIFT lv_gd_buffer LEFT BY 255 PLACES.
IF lv_gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
NOTE: problem i believe is with ''. i'm getting this tilt symbol () in my pdf internal table. here in the above code the line TRANSLATE lv_gd_buffer USING '~ ' is changing the existing tilt to space. so my logo is getting disturbed.
even i tried with REPLACE this tilt with other char, but it doent work.
can you give any idea...
Maybe you are looking for
-
IPhoto 9 - Photoshop Elements 9: Saved photos not showing thumbnails
After editing iPhoto images in PE9 and saving them, I cannot see the updated thumbnail in iPhoto. If I double-click on the photo, I can see the edited version, but where is the updated thumbnail? I read Old Toad's advice to set the file saving prefer
-
HT5019 thunderbolt to hdmi not responding
the thunderbolt for HDMI is not working. any suggestions. Mike
-
Error reports converting a vi from LV8 to LV7.1
Neatly working VI in LV8.0 for some reason I am converting it into earlier version of LV7.1. When I opened from LV7.1, I got the error message (report attached). Hope somebody help me out to avoid coding from scratch. Kousy
-
Configuring BI on Existing ECC 6.0 System
Hi All, We have an ECC6.0 system and currently there is a requirement to configure BI, can any one share the experience of doing it. I think we need to Install the BI_CONT addin and are there any taks involved after it? Regards, Ershad Ahmed
-
When I left for class this morning, I checked the bus schedule like usual (on the iPad), with no problems. It worked perfectly. I turned it off and left for class. I get back from classes today and turn my iPad, to come to a "Cannot connect to Linksy