Sent items are sometimes not saved

Hi,
I have an intermittent problem in Mail 2.0.5, where some e-mails are not being saved in the sent items folder I have set up.
I'm using IMAP, and have selected the option to store messages on the server, and have selected a folder to use for sent items. Most of my sent messages go there.
Sometimes, (as far as I can remember it's only when replying or forwarding) my sent messages disappear. If I look in the sent items folder immediately I've sent the message, I see it there for a split second before it vanishes. If I click on the arrow next to the message I've replied to or forwarded, I get an error stating the message could not be found. Spotlight turns up nothing when I look for these lost messages.
Does anybody have any suggestions?
Thanks a lot,
Ben

I have the same problem, and I think my mail is an older version 1.3.11 (I don't know why it's not updated though!!) Anyway... it's very frustrating, but I know that even it's not copied in the sent forder, the recipient receive the message. But We don't have any proof until the recipient reply or tell us that he had it. I could say that 97% of my message are copied in the sent folder and the other 3% is lost I don't know where... Why ? I don't understand... I there a probleme with the server .mac or the Mail app. ???
Thank you

Similar Messages

  • Sent messages are sometimes not saved

    Hello,
    This is a follow up to this thread, which was never answered and is now archived:
    http://discussions.apple.com/thread.jspa?threadID=2213207
    In Mail.app, using IMAP, my sent messages are sometimes not saved. I'd say about 1 in 20 never appear in my Sent folder. The recipients always receive these messages, so it's not a delivery problem. I just don't retain a copy of them. This is very frustrating if I send a cost estimate to a client, or a detailed description of a technical problem that I need to refer back to later.
    I've rebuilt my mailboxes and I've checked my IMAP folders on the server via a webmail interface, and the messages are not there.
    Has anyone else experienced this? It's hard to believe I'm the only one, but it's hard to search for this problem because my search results are always full of people who have lost or can't save -any- of their sent messages. My problem is intermittent and random.
    Thanks,
    -Arlo

    I have a similar occasional problem with an IMAP account using a Comcast Business Class Exchange server. I use Mail and my iPhone to access the account; I'm running OS X 10.6.4 on my laptop but my "sent messages" issue predates the latest release.
    The first time I noticed this issue I thought, "I'll just access my mail via the Comcast web portal. It'll be in the 'sent' folder there." No dice. The "sent" messages simply never stay on the server, yet my recipients get them.
    It's distressing. First, the solution would appear to be a switch to a MS mail client, which I swore off years ago. Second, I rely on having a "sent" message as a record. I switched off IDLE per your suggestion, Ernie, but otherwise I'm in the same boat as the others here. Please keep this thread alive. I'm hopeful that this can be resolved.

  • I am able to change and add bookmarks, but these changes are sometimes not saved when I restart Firefox.

    Since updating to Firefox 4, changes to bookmarks are saved sometimes after restart, but not usually (maybe 25% of the time). The problem sounds exactly like what is described on the [[Bookmarks not saved]] help page, yet after making all the recommended changes, the problem persists. I have also performed the recommended actions on the [[Toolbar keeps resetting]] help page, with no luck there either.
    The only other thing that I can think of that may be helpful is that I use Firefox Sync between two computers, and both seem to be having this problem.

    I have some more information, in case it helps. During one Firefox session, I made about 8 changes to my bookmarks.When I restarted Firefox, the first few changes I had made were saved, but the rest were not. Additionally, the favicons that were present during my last session (that I hadn't had before that session) were reverted to the default favicon. I hope this helps!

  • All my sent items are not visible in outlook

    When I send email from my iphone I can't see it in sent items in my desktop pc's outlook 2013. However, all inbox items are visible. My OS is windows 8 pro.
    Thanks

    Looking at the .mac mail folder, there are no black triangles, I have inbox, drafts and sent (and trash) icons.
    I tested the .mac mail (I know I keep saying "this site" but I don't know what else to call it?), and using this one it does keep a copy of the sent items. BUT using the Mail (the stamp icon mail) copies of sent items are not saved.
    I want to use the Mail one, because you can choose fonts and all that other stuff, which is why I even purchased the year membership! (otherwise I would just stay with Yahoo mail).
    I really don't have a clue about this stuff and I appreciate you taking your time here.

  • My sent items are not in the sent folder

    I went to Preferences and chose to have sent items in the folder but they are not there. Anyone have any suggestions?

    Looking at the .mac mail folder, there are no black triangles, I have inbox, drafts and sent (and trash) icons.
    I tested the .mac mail (I know I keep saying "this site" but I don't know what else to call it?), and using this one it does keep a copy of the sent items. BUT using the Mail (the stamp icon mail) copies of sent items are not saved.
    I want to use the Mail one, because you can choose fonts and all that other stuff, which is why I even purchased the year membership! (otherwise I would just stay with Yahoo mail).
    I really don't have a clue about this stuff and I appreciate you taking your time here.

  • ReportViewer Parameter area state not saved without to refresh in ie

    Hi from Germany,
    we have created a master detail report with 3 levels and some parameters defined. Connected are these 3 reports by drill throughs with "go to report"-actions. We use the report manager for the navigation to the reports.
    For a faster go back from a detail report to its higher level report again we added links in the header with go to url actions and the expression "javascript:history.go(-1)").
    It works great but in the ie (version 10 and 11, too) there is a not wanted behavior after the user has updated the parameter values and clicked on "Show report". The report is rendered now with the changed parameters fine BUT the parameter area
    is still opened.
        First question: Is there a way to collapse the parameter area also with the click on "Show report"-Button?
    Now users close often the parameter section and drill through to the next level report. When you go from there back (history.go(-1) or also with the browsers back-button) the report before opens but again with an displayed parameter area. It forgots that users
    have collapsed it before.
        2nd question: It seems that the last state with the closed parameter area was not saved (in the session?). Can someone explain me why and if there is a way to solve it?
    In firefox it works like we wanted. There is the parameter area collapsed automaticly after go back in history. It seems it is realy a bug in the ie.
    I have found out a workaround:
    when you close the parameter area in ie and click after it on the refresh-button on the reportviewer-toolbar then the collapsed state is registered and go back to this report opens it right with collapsed parameters. Also a refresh by the browser-button opens
    the report with collapsed parameters.
    It seems for me it is a bug, isn't it?
    Kind regards
    René
    René

    Hi René,
    If I understand correctly, you want to hide the parameter area when the report render in report server. I have create a simple report to test, however, I cannot reproduce the same issue.
    Based on my test, it has two situation when we go to subreport the parameter area cannot hide.
    If we are use “Go to URL” action jump to the subreport, it will not hide the parameter area.
    We have not pass the parameter value to the subreport, it will display the parameter area for us to choose parameter value.
    If you are not above situation, we can use “Go to URL”
    action to work around it. To add parameter (rc:Parameters, rc:Toolbar) in report URL to control the parameter area visibility. Please refer to the following URL:
    Http://ServerName/ReportServer/Pages/ReportViewer.aspx? %2fReportFolder%2fReportName&rs:Command=Render&rc:Parameters=Collapsed
    Reference:
    http://blogs.msdn.com/b/jgalla/archive/2009/03/23/hiding-parameter-area-when-viewing-reports.aspx?Redirected=true
    If there are any misunderstanding, please elaborate the issue for further investigation.
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Sales order some line items are showing not relavant

    Hi SD Guys,
    In sales order some line items are showing not relavant.
    Why are they showing a status of not complete or "not relevant"?
    Thanks
    Sunny

    Hi sunny,
                     plz check the each line item in the sales order controls by the item category, so check the item category , depends on the item category, pricing,delivery and billing takes place.
    regards,
    ram.

  • Sent Items folder is not available

    I am using Outlook 2010 and have configured my domains' email address as an account on the Outlook profile. On the left sidebar I see my email address listed as follows:
    > [email protected]
    Inbox
    Deleted Items
    Junk E-mail
    Sent Items
    I have configured my account to keep a copy of sent items. When I compose and email and send it I always get the "Sent Items folder is not available" message which I never got in Outlook 2003.
    However, as you can see above the Sent Items folder is listed! When I click on the Inbox node and select IMAP Folders I see that it is NOT subscribed to ANY folder. I press the Query button and select all folders (Inbox, Deleted, Junk, Sent) and press the
    Subscribe button. It doesn't produce any error message. I close that dialog and then reopen again to see my subscribed folders list and IT IS EMPTY!!!
    So why is it failing to subscribe to the Sent Items folder? This worked seamlessly in previous versions of Outlook, this "improvement" is obviously an anomalous behavior.
    http://www.virtual-aviation.net/

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Thanks,
    Ethan Hua CHN
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Sent items are not received...

    Hello community...
    Seeking some help on a strange problem. I constructed an email over a few days, then sent it to a number of people, and none of them received it. So I resent. Same result. So I forwarded it to myself as a test - a few days ago and it's still not appeared in my alternative email inbox.
    I have tried:
    - forwarding the email
    - replying all and changing the addrees
    - copy/paste into a few email and starting over
    This email refuses to go to any reciptient. Each time, the email DOES appear in my sent items, as though it has gone quite happily. Neither myself or my friends has any postmaster deivery failure messages or suchlike.
    (I got around the problem by copying/pasting into my gmail account and sending from there.)
    Any clue?
    Thanks
    Adrian

    Dear Riaz,
    Thanks for your suggestion. I checked but DNS is working fine. we have two ADDC and both are syncing properly. I also tried to see any wrong entries but could not found. repadmin /syncall works without error on both ADDC. We are facing this issue few time
    a day for users. i.e. if a user's sends email to another user. 10 times it'll reach normaly while one time it wouldn't go. similarly if somebody from outside send's email to our user who is added as a contact in our AD domain but works outside office, his
    email some times rejected by exchange server with the same error
    "The domain name in the email address is incorrect. Check the address.
    554 5.4.4 SMTPSEND.DNS.NonExistentDomain; nonexistent domain".
    while he is using the same domain which our internal user's are using (as smtp addres).
    I have a doubt on our broadband internet as we changed it a few days before with a different ISP and after that it started happening.
    Although I checked the ISP router, it's firewall settings etc etc but everything looks fine.

  • Icloud sent messages on device not saved in sent folder

    My icloud email is set up as an IMAP account on my Android phone and Windows computer (using EmClient).  Sent messages are not being saved to the sent folder.  I tried a message online in icloud and on my ipdad mini and there was no problem there with saving my sent message in the sent folder.  How can I fix this?

    This is a long shot, but Apple is going to start requiring you to set up app-specific passwords in order to allow third-party apps to access data from your iCloud account.  This is outlined in this document: Using app-specific passwords.  This isn't supposed to be implemented until October, but maybe changes are already taking place behind the scenes in the way third-party apps sync with iCloud that is causing them to "misbehave".
    Ask EmClient support if they are hearing from there customers that they can no longer sync with iCloud, and if is, if it is because of this new policy.   If so, you may need to just put up with it until Oct. 1st. when you can generate a password for these apps.

  • Sent Items (cached mode) not going to shared mailbox 'sent items.' Permissions Correct.

    Hello,
    I have about 15 users that work out of a shared mailbox.  According the article below, the email should go the the 'sent items' folder of the shared mailbox and this is not happening.
    http://blogs.technet.com/b/maliks/archive/2013/01/14/how-to-have-separated-sent-items-folder-in-shared-mailbox-in-outlook-2007-and-2010-exchange-server-2007-or-2010.aspx
    The users have Full Control Permissions - set from Exchange Mgmt Console.  They are members of the Security Group that has FC Permissions.  Outlook is in cached mode.
    Do the user accounts needs FC Permissions directly on the mailbox - as opposed to using a Security Group?
    Please Advise,
    Thank you

    I have not added the registry entries.
    Per the article - I have all users setup as described below - which is listed as the 2nd workaround.
    2. For Outlook 2010, you can also add the additional mailboxes as an additional Exchange account for this to work. However, this requires you to have full mailbox
    access rights for the additional mailbox (this has to be set by your Exchange administrator). You can then select it as a sending account and will be sending the message
    “as” that mailbox instead of “on behalf of” that mailbox.
    Thanks

  • Sent items from Blackberry not appearing in Outlook sent items

    I used to use hotmail and all sent items appeared in outlook sent items, I am now using outlook and they are not.  Please explain in very very simple language using no IT terminology(!!!) how I make my blackberry sent items show up in outlook!
    Thanks

    When you used hotmail and outlook, I take it you used to send all your email using outlook?
    Items you send on your blackberry should show up in your sent items on the hotmail website, but the sent items in outlook is separate, and will only show emails you actually send from outlook. It doesn't pickup sent items you've sent from the hotmail website or your blackberry - this is a limitation of outlook and hotmail, rather than blackberry.

  • "Sent Items" folder can not be synced up in time for Outlook 2013 cache mode

    Hi,
    I found a strange problem in Outlook 2013 cache mode. Hope anyone can help me find out if it is the new design of outlook 2013 or outlook 2013 issue.
    I am using Exchange 2013 and Outlook 2013 client. I created two outlook profiles in two machines separately with a same exchange user, the difference for the two profiles is one is in cache mode, and the other is in uncache mode.
    I launched outlook using the profiles in the two machines, go to "Sent Items" folder, I assume there are some messages in this folder in your mailbox, do below steps:
    1. modify one of the messages in the "Sent Items" folder from the profile in cache mode, in this case, the changes to the message will be synced up to the profile which is in uncache mode immediately.
    2. modify another messages in the "Sent Items" folder from the profile in uncache mode, in this case, the changes will never be synced up to the profile in cache mode.
    In the second action above, even if I clicked "Send/Receive" button, and waited for whole night, the changes was not synched up to the cached mode side. The way I can get the latest changes to the "Sent Items" folder is "clear
    offline items" and click "Update folder" or I need to remove and create the profile again.
    All in all, the changes to the items in "Sent Items" folder of Outlook 2013 which was did from cache mode will be synched up to exchange server side immediately, but the changes which was did from exchange server side will
    never be synched up to the cache mode side unless the end-user clear the offline items and update folder or create a new profile again.
    Any help would be appreciated, thanks in advance!
    Best Regards, Emily

    The first behavior is by design even in the previous version of Office.
    "1. modify one of the messages in the "Sent Items" folder from the profile in cache mode, in this case, the changes to the message will be synced up to the profile which is in uncache mode immediately." 
    Uploading local changes ---- By default, when you make a change locally, that change is synced to the server after 15 seconds. When you make another change within those 15 seconds, then the timer is reset again. As now you
    could in theory hold off synchronization indefinitely, there is the maximum timer. This timer is started after the first change that you made and when it reaches 60 seconds, then a synchronization will occur to upload all the changes that you have made thus
    far, no matter how many seconds are left on the upload timer.
    However, in second section, this should be a downloading server changes
    behavior ---- When a server side mailbox change occurs, Outlook is notified by the Exchange server of this change. By default, Outlook will then wait 30 seconds before synchronizing these changes. If there are any other changes occurring
    at the server level within these 30 seconds, then these changes are downloaded at the same time as well.
    At this time, please directly modify the message in sender items folders through Web-based access and then wait over 30 seconds to check if the items changes from cache mode profile. Please also test if we can reproduce that in other folder.
    Let me know the result. Thanks.
    Cheers,
    Tony Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please contact
    [email protected]

  • Line item data is not saving while creating a Sales order using Interactive

    Hi all,
    I am creating a sales order Using Interactive forms. In the form i am having Header data and line item data.I had created two structures one for Header data and one for Line item data. For entering  the LINE ITEM DATA i had created a Dynamic table with Buttons ADD ROW and DELETE ROW.
    User will Add the Row or Delete the Row based on the requirement.
    My issue is When ever the user clicks the SUBMIT button after entering the header data and 3 line items data , Sales order has been created with only first line item and the remaining two line items are not created.
    My Interactive form is like below
    HEADER DATA
    DOC_TYPE
    SALES_ORG
    DIST_CHN
    DIVISION
    PURCH_NO
    PARTN_ROLE
    PART_NO
    LINE ITEM DATA
                             ITEM_NO      MATERIAL          PLANT          QTY        COND_TYPE            COND_VALUE
    ADD ROW
    DELETE ROW
                                                                                    SUBMIT
    My  code for the method ONACTIONCLICK is like below
    method ONACTIONCLICK .
    data:
          Node_Adobe       type ref to If_Wd_Context_Node,
          Node_Zsaleheader       type ref to If_Wd_Context_Node,
          Elem_Zsaleheader       type ref to If_Wd_Context_Element,
          Stru_Zsaleheader       type If_Main=>Element_Zsaleheader,
          Node_Zsaleitem       type ref to If_Wd_Context_Node,
          Elem_Zsaleitem       type ref to If_Wd_Context_Element,
          Stru_Zsaleitem       type If_Main=>Element_Zsaleitem.
      data: header_data type BAPISDHEAD.
      data: item_wa type BAPIITEMIN.
      data: item_data type table of BAPIITEMIN.
      data: partner_wa type BAPIPARTNR.
      data: partner_data type table of BAPIPARTNR.
      data: sales_order type BAPIVBELN-VBELN.
      data: Errorlog type BAPIRETURN1.
    navigate from <CONTEXT> to <ADOBE> via lead selection
      Node_Adobe = wd_Context->get_Child_Node( Name = IF_MAIN=>wdctx_Adobe ).
    navigate from <ADOBE> to <Zsaleheader> via lead selection
      Node_Zsaleheader = Node_Adobe->get_Child_Node( Name = IF_MAIN=>wdctx_Zsaleheader ).
      Node_Zsaleitem = Node_Adobe->get_Child_Node( Name = IF_MAIN=>wdctx_Zsaleitem ).
    get element via lead selection
      Elem_Zsaleheader = Node_Zsaleheader->get_Element(  ).
      Elem_Zsaleitem = Node_Zsaleitem->get_Element(  ).
    get all declared attributes
      Elem_Zsaleheader->get_Static_Attributes(
        importing
          Static_Attributes = Stru_Zsaleheader ).
      header_data-DOC_TYPE = Stru_Zsaleheader-DOC_TYPE.
      header_data-SALES_ORG = Stru_Zsaleheader-SALES_ORG.
      header_data-DISTR_CHAN   = Stru_Zsaleheader-DISTR_CHAN.
      header_data-DIVISION = Stru_Zsaleheader-DIVISION.
      header_data-PURCH_NO = Stru_Zsaleheader-PURCH_NO.
      partner_wa-PARTN_ROLE   = Stru_Zsaleheader-PARTN_ROLE.
      partner_wa-PARTN_NUMB = Stru_Zsaleheader-PARTN_NUMB.
       append partner_wa to partner_data.
        Elem_Zsaleitem->get_Static_Attributes(
        importing
          Static_Attributes = Stru_Zsaleitem ).
      item_wa-ITM_NUMBER = Stru_Zsaleitem-ITM_NUMBER.
      item_wa-MATERIAL   = Stru_Zsaleitem-MATERIAL.
      item_wa-PLANT = Stru_Zsaleitem-PLANT.
      item_wa-REQ_QTY = Stru_Zsaleitem-REQ_QTY.
      item_wa-COND_TYPE   = Stru_Zsaleitem-COND_TYPE.
      item_wa-COND_VALUE = Stru_Zsaleitem-COND_VALUE.
      append item_wa to item_data.
    CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
      EXPORTING
        ORDER_HEADER_IN           = header_data
      WITHOUT_COMMIT            = ' '
      CONVERT_PARVW_AUART       = ' '
    IMPORTING
       SALESDOCUMENT             = sales_order
      SOLD_TO_PARTY             =
      SHIP_TO_PARTY             =
      BILLING_PARTY             =
       RETURN                    = errorlog
      TABLES
        ORDER_ITEMS_IN            = item_data
        ORDER_PARTNERS            = partner_data
      ORDER_ITEMS_OUT           =
      ORDER_CFGS_REF            =
      ORDER_CFGS_INST           =
      ORDER_CFGS_PART_OF        =
      ORDER_CFGS_VALUE          =
      ORDER_CCARD               =
      ORDER_CFGS_BLOB           =
      ORDER_SCHEDULE_EX         =
    endmethod.
    PLEASE SUGGEST ME IF ANY CODE CHANGE IS REQUIRED
    Thanks in advance
    Ajay

    Hi,
    The item data is not read because, the dynamically added rows should also reflect back to the Web Dynpro context. When the user clicks on Add Row, use the Onsubmit event to add a empty line to internal table and then bind it to the context. And if the user removes a row, remove a row from internal table and bind it back to the context.
    You may refer this article.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f0ed1-a17a-2c10-7db4-d515a5b047ed
    Regards,
    Runal

  • TS3276 sent items are no longer indexed, how to solve it?

    Sent messages are put in the map "sent" but are not displayed well. Only expeditor and subject are shown correctly. The content of mail or discussion is not correct, it comes from former emails related to another subject... quite ennoying. I guess the problem is caused by a wrong indexing. Any idea how can I solve it?

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

Maybe you are looking for