Sequence settings for PAL DVD output

G'day,
I'm cutting my sister's wedding video. I have footage from 2 cameras - a Panasonic TM900 (1920x1080p50) and a Canon MVX430 (miniDV SD PAL "widescreen").
The intended media is DVD. I am using Final Cut Pro, and DVD Studio Pro.
I've read that I should use a PAL CCIR 601 5:4 720x576 frame size, with PAL CCIR 601 pixels in order to achive widescreen DVD playback.
And this seems right, as when I drag the HD and SD footage to the sequence, they both maintain their 16:9 ratios - with black borders top and bottom.
However once I start playing around with the footage... zooming in (ie increasing the scale in the Motion tab), or if I re-centre the footage, moving it around the frame, those borders move around or are completely lost.
Previously for this problem I have just used the crop function (with key frames as required) in the Motion tab, but that can get very painful.
Am I using the wrong work flow here? Should I be using an actual 16:9 frame from the start, instead of the 5:4 with borders?
Is there an easier way to maintain the borders?
Hope this makes sense...
For the record, I do have some understanding of what I'm doing, just was only taught what I needed to complete the projects I worked on at Uni, so don't have a full understanding of all of the complexities involved...
Thankyou
cosmic

>Should I be using an actual 16:9 frame from the start, instead of the 5:4 with borders?
Yes. Make your Sequence DVPAL anamorphic.
>Is there an easier way to maintain the borders?
Why do you want borders? On a 16:9 TV the screen will be filled. You will only see the borders on a 4:3 set.

Similar Messages

Sequence settings for importing DVD material

Hi there!
I am about to start a new project that will be shown at a convention on a big screen via projector.
Basically, I have recieved DVD's from around the world that I am supposed to edit into a montage. So far I have been opening them using MPEG streamclip and converting them into Quicktime Files.
Can anyone recommend the best possible Sequence settings to use as well as what Frame Size and Compressor to use when exporting from MPEg streamclip to FCP?
Thanks

use the sequence easy set-up for dv-pal (sweden is pal, yes?)
export your clips from streamclip using dv-pal as the type for PAL dvds.
for ntsc dvds, you need to pull the clips off as ntsc dv/dvcpro then using the advanced section of compressor, convert them to dv-pal.
mix by stirring lightly, put into a greased pan and place in a 350 degree oven for 30 minutes or until golden brown.
x

FCP Settings for progressive DVD Output

Hello FCP folk,
I'm working on a project that uses still photos as the only visual content, most of these are historic black and white. Wondering if I can take advantage of this and work towards a progressive scan DVD as the final out put.
Project is being edited in Final Cut 5, OS 10.4.3, playback through an ED and HD ready LCD monitor.
I'm wondering what the proper workflow should be to work towards this end. FCP settings? Output from the editing timeline options? DVDSP options ?
Any suggestions appreciated,
Thanks,
Drew

Thanks for that Ann.
I've done small samples at 720 x 25 720 x 50 1080 x 25 1080 x 50 before using Dynamic Link (which I must admit I've found very convenient and effective previously) to set up in Encore and burn without extras such as menus.
Playing back on a 37" TV we can't see a discernible difference apart from a little shimmer on horizontal lines.
I think I'll press ahead with 720 x 25 with this project which is what I've used before and am confident with but would welcome more advice on this topic.
I wonder if these settings would be even more critical should I need to output to Blue Ray
Norman

Settings for SD DVD output

Hi
Is there any advantage in editing in 1080 x 50 if final product will be on SD DVD?
Thanks
Norman

Thanks for that Ann.
I've done small samples at 720 x 25 720 x 50 1080 x 25 1080 x 50 before using Dynamic Link (which I must admit I've found very convenient and effective previously) to set up in Encore and burn without extras such as menus.
Playing back on a 37" TV we can't see a discernible difference apart from a little shimmer on horizontal lines.
I think I'll press ahead with 720 x 25 with this project which is what I've used before and am confident with but would welcome more advice on this topic.
I wonder if these settings would be even more critical should I need to output to Blue Ray
Norman

Sequence settings for 16:9

Hi,
Just doing some PAL tests of 16:9 HD to 16:9 SD downconvert.
What are the sequence settings for this?
If I use the normal DV PAL 48khz, the VIEWER window shows a normal 16:0 ratio, but the CANVAS window shows a letterboxed 4:3 window. When I export this project, I get a letterboxed 4:3.
If I need to give my European client a 16:9 SD project, what are the sequence settings.
Thank you kindly!

Thanks Michael,
I still get images in FCP and QT exports that are letterboxed. Is that normal? I guess I assumed 16:9 FCP project windows and QT export movies would be all image and no letterbox within a 4:3 window.

Best Settings for Exporting DVD Footage in a Movie File

Hello,
I've been trying to find the best settings for exporting DVD footage into a movie file from Adobe Premiere CS6.
I recently have been using my Magnavox DVD recorder for recording VHS tapes that I made long ago for shows and various other things, and no matter what, my footage doesn't come out as it needs to be.
Here's an example of what I did recently with my own settings:
http://www.youtube.com/watch?v=qFV4sT7rHGs
I'm not expecting HD footage, I know these are tapes, but I'm playing the raw footage on my Xbox 360, and it looks better than this. I had to directly use the VOB files on the DVD for this, as trying to rip the files into an AVI or any other format with a DVD ripper didn't do anything, in fact it degraded the quality and made the audio not play in Premiere.
So what would be some good settings for exporting a sequence with DVD footage that is from a VHS into a movie file, preferably one that wouldn't degrade the quality?
Thanks!

First, read Why not edit mpeg http://tangentsoft.net/video/mpeg/edit.html to get a general idea of why a VOB makes a very poor source file (which is a renamed MPG, with some other stuff like menu screens)
Also, Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
Once you have a DVD compliant VOB on your timeline, and understanding that a standalone DVD recorder sometimes plays fast-n-loose with "compliance" per the DVD specification, about all you can do is export to standard or widescreen DV AVI and accept the fact that re-encoding an already compressed file is just not going to give great results

What are the best imovie, mpeg4 settings for making dvds?

What are the best imovie, mpeg4 settings for making dvds?

• iMovie'08 to 11
- Share to Media Browser - AND as Large (or Medium) - HD or other resolutions degrades the final result
iMovie'08 to 11 are not the tools of choise if quality is important as they all degrade the picture by discarding every second line when going from, Event's to Project's and this can not be mended.
iMovie HD6 and FinalCut delivers 100% of what any DVD-Authoring program needs.
• DVD is as standard MAX - intrelaced SD-Video - and can not be any better than this
• iDVD does only care about TIME / Duration as
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
• iDVD Does Region = Zero (to be played everywhere)
• Frame rate - DVD can be in two types PAL (25fps) and NTSC (29.97fps)
If Your material is 30fps then keep to NTSC (29.97fps), if 25fps keep to PAL.
One can feed iDVD the other frame rate - BUT RESULTING DVD WILL BE BAD
I use JES_Deinterlacer (free on Internet) to convert all material to the same and final frame rate
• NTSC - US etc
• PAL - EU etc
Yours Bengt W

Sequence settings for HD

what are the exact sequence settings for cutting 1080i60 footage in FCP? From my understanding; it's 1920 X 1080 with 59.94fps. But what fields should render first; upper or lower? I also need to know this info for using After Effects; I need to know the specifications so I can render my animations.
If there is anything else I should know, please let me know. thanks.

Open your preset in FCP or check your sequence settings and all that information will be there.

Proper sequence settings for importing Canon Rebel T2i footage

Greetings, all. I searched the forum and didn't find this question answered elsewhere, so I thought I'd ask.
I'm using Adobe Premiere Pro CS4, version 4.2.1, and I'm trying to find the ideal sequence settings for the Canon Rebel T2i, which records in MPEG-4 AVC/H.264, with adjustable frame rate. I am running on Apple Mac OSX 10.8.2.
I've been editing with this footage for over a year now, and it's always been a struggle because I have to render all footage before I can even play it in Premiere. When first imported, the render bar above the timeline is yellow.
I'd like to see if I'm doing this incorrectly; to know if I have a simple sequence setting that's incorrect. What sequence settings should I use for my imported footage to start out green and not require a lengty render for video that isn't even edited yet?
Thank you,
-Matt

>When first imported, the render bar above the timeline is yellow
I think this is written for CS5, but the concept should be the same
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html

Best settings for older dvd players

anyone have any recommendations on bit rate or other compression settings for older dvd players? everything i produce plays fine on my personal dvd player that actually says dvd-r on the front, but i continuously have problems with clients players having pixel issues of freezing up. i've tried lower bit rates and such but i'd rather not go into all the different angles and just see what you guys say.
I can't be the only person out there that has clients with cheapo players!
thanks in advance.

I don't think you are going to find a single solution to this problem. Just about every DVD player is going to have problems with some brands or types of recordable DVDs. Some things to consider or try:
1.) Educate your customers about potential DVD media problems. Potentially tricky since not everyone will freely admit or accept that such problems exist.
2.) Burn the DVD at the lowest possible rate (burn at 1X rather than 4X, etc.).
3.) Try a different brand of DVD-R.
4.) In special cases consider using DVD-RW rather than DVD-R (some older players will actually work better with DVD-RW).
5.) Consider using the best possible DVD recorder (I'd recommend Plextor drives mated with Roxio's Toast software).
6.) Use a commercial DVD mastering service (only practical if you want to duplicate several hundred discs -- too costly for small runs).

Sequence settings for combining HD videos, SD videos, and stills to DVD?

Hi,
After reading through the forum, I am still not sure whether I should be using the "lowest common denominator" sequence (DV NTSC preset to match the avi footage), the "highest quality" sequence (DSLR 720p preset to match the mov footage), or the sequence which best matches my desired final output (i.e. DV NTSC for DVD output) for a project consisting of HD 720p mov, SD 480i avi, and jpeg source files.
Obviously, a newbie like me should be using Windows Live Movie Maker or even PE9 rather than PP CS5 but I hate not having a timeline (among other things missing in WLMM) and I'd like to make use of the 8GB of RAM with my Windows 7 64bit system when editing the HD footage.
Thanks in advance for your feedback and any other suggestions you may have.

So there shouldn't be an issue if I use source video clips with lower audio sample rates for a sequence with a 48kHz sample rate...
There should be no real issue, as PrPro is very good at handling most common Bit-depths and Sample-rates. Just allow the program to go completely through the Conforming process. Depending on one's computer and the Duration (plus CODEC's, etc.), this should not take very long - just be patient.
Good luck,
Hunt
PS - I agree completely with Harm's comment on up-rezzing SD to HD, however there are a few programs, like Red Giant's Instant HD, that do a pretty good job. If your final output is SD, then definitely go with Harm's suggestions and down-rez (Effect>Motion>Scale) for the HD material.
PPS - for inclusion of stills, I Scale my images in PS to match my Project's/Sequence's Frame Size, though I have it from a very good source (Todd), that PrPro CS5 has improved the Scaling algorithms over previous versions.

Sequence Settings for HD to SD DVD

I have an HD Camcorder that records to a flash 8 GB memory card. Once I import the files into Final Cut Pro, I need to export using Compressor with the "DVD Best Quality for 90 minutes" option. The problem is that Compressor takes forever. Over 60 hours estimated.
I've tried changing the sequence settings before I add the footage to the timeline, but no matter which settings I use for the sequence, it still takes over 60 hours to export.
I've tried matching the video settings with the sequence, and almost any other combination I can think, but there are simply too many "Trial & Error" options to go through.
Is there a setting(s) for the sequence in Final Cut Pro, that when you export to Compressor it doesn't take that long?
Any suggestions would be great?
Thanks.

David, I'm using a Samsung HMX-H100. An example of the file name is: HDV_001.MP4
I'm shooting in HD, 1080i. Overall, the length of the footage is about 45 minutes. Sometimes I use an external scratch disk, but I couldn't tell a difference when I was using one and not.
My sequence settings have been varied. I have let the sequence match the video clip settings, I have changed the sequence settings before I added the footage and then let the sequence settings stay like that.
In Final Cut Pro in the sequence settings, I've used the default presets, and changed it as well. Since my final goal is to burn an SD DVD, I'm looking for the best sequence settings that will allow for the fastest export from Compressor, and still maintain the HD clarity that the footage was shot with.
Let me know if you need any more details.
Thanks.

Help please with capture / sequence settings for DVCAM PAL 16:9

Simple question but I'm baffled by choices for capture/sequence using FCP6 to capture 16:9 PAL DVCAM. Have tried esay set up (not enough options) and also sequence and capture settings manually too many options ) and always seem to end up with borders top and bottom, not full viewer / canvas at correct aspect ratio. Can someone tell me correct settings. I'm baffled by inclusion of 5:4 aspect ratio and whether in the compression box under advanced settings in the sequence settings bow I should select 4:3 or 16:9 and in the seq. settings box itself whether I should check anamorphic 16:9.In audio/video settings (summary tab) there's also a question about playback settings which is set to '(missing) apple firewire pal 720x568'. What's that about. Any assistance much appreciated.

Don't over think it. There's no reason why you should have to modify a capture preset in your situation. Use the easy setup for DV PAL 48 KHz Anamorphic (assuming your footage is anamorphic and not letterboxed). If you're seeing gray bars at the top and bottom of the canvas, hit ctrl-U to have the windows automatically adjusted to the right size. If you're seeing black bars, then your footage is probably letterboxed. You should use the regular DV PAL easy setup to capture that. If the Video Playback device is set to (missing) it's because your deck or camera is not turned on, or isn't connected to the computer.

Sequence settings for mixed 24f,30f

I shot a friend's wedding on a HVX in 24p on tape (not cards) and a 2nd camera 30fps on a consumer DV camera. I want to edit these together; I do not know what the Sequence settings should be or what challenges are involved. My final output is a DVD. Any help is appreciated.

24P on tape is still 30 fps. It's 24fps with a 3:2 pulldown added. Just set your sequence for NTSC 29.97 DV...
Patrick

Urgent: Progressive possible for PAL DVD?

Hi all
I'm making NTSC and PAL versions of the same DVD.
On the NTSC version we have encoded all the menus (short movies created in FCPX) as 23.98 progressive in Compressor, to stop the title text flickering due to interlacing. This worked perfectly, no more flickering text.
For the PAL version however Compressor's PAL DVD settings only mention 25i, no progressive options seem available.
Any suggestions on how to repeat this on the PAL side?
Thanks everyone - Jon

If you're creating a DVD, there's really no choice of codecs, since DVD video is a very specific and tightly constrained form of MPEG-2 video. MPEG-2 video is highly compressed and is not a high-definition format, so it is absolutely unavoidable that export to DVD video will cause some quality loss. This is true for even professionally created DVDs. There is an MPEG-2 DVD export preset in After Effects that you can choose from the Format menu in the Output Module Settings dialog box.
If, however, you're handing off your video as input to a larger work, and you need to create an intermediate file that preserves all detail for as long as possible in the post-production pipeline, then you should render and export using lossless encoding. My preference for creating losslessly compressed intermediate files from 8-bit-per-channel sources is the PNG video codec in a QuickTime (MOV) container.
See this FAQ entry (and the pages that it links to) for more information about compression and choosing settings for specific purposes:
http://forums.adobe.com/thread/729526
You mentioned "jerky" output. See this FAQ entry for information about losslessly encoded movies and how they are not suited for playback:
http://forums.adobe.com/thread/684381
Or perhaps the jerkiness is coming from the frame-rate mismatch between your 30fps source and 25fps composition. If so, then frame blending can help.

Sequence settings for PAL DVD output

Similar Messages

Maybe you are looking for