Serial No. tobe assigned to issue material in prod order confirmation scree

Hi,
have one material to be issued against production order in CO11N, this issued material should get one serial number atomatically.
regards.

Dear,
In an Production order CO01/CO02 allows the user on header level to assign serial numbers to the production order.
For component you can not do this in confirmation screen For the work around refer this link,
[Serial Number For Components |Re: Reg serial numbers for components]
Regards,
R.Brahmankar

Similar Messages

  • System msg M3418 Serial numbers already assigned to this material Error

    Is it possible in IMG to change msg M3418 Serial numbers already assigned to this material...
    From an error msg into a warning?
    Thanx
    Andreas

    Found it...
    OIS2.

  • BAPI or FM to get material goods issue for a prod order

    Hi
    I need a FM to get the material goods issue for a prod order. Please let me know.
    Thanks and regards
    Harish

    Hi Harish,
    use FM <b>BAPI_GOODSMVT_CREATE.</b>
    have a look at this thread ..
    FM for good issue for production order
    Regards,
    Santosh

  • Restricted issue material in "work order"

    Hi All
    How to restrict the material at the time of the process of issue material in work order?
    we need to restrictive to Not to be wasteful.
    any can help my problem?
    thankyu..
    The pooh

    Hi PS
    Sorry if my question make you confused. but actually im need to have a system that we can restricted issue material.
    In our company have the rule that we can only take some part consumable.
    for example :
    in one month, we can only take the part just 100 pc. we not allowed to take the part more than 100 pc.
    so we must restrict that.
    Best Regards,
    the pooh

  • Automatic Valuation Type assignment while issuing material.

    Dear All,
    I am Issuing material from a Storage Location for Production. Split valuation is on at some of the production materials. I had configured the Stock Determination, in which following are the steps for this:
    1) Create Stock Determination Group. (These groups are dependent on the material types on which split valuation is on)
    2) Create Stock Determination Rule. (Only one rule is created PP01 for Production issuance)
    3) Define Stock Determination Strategy headers.
    4) Define Stock Determination Strategy Item. (Both the valuation class is define with one storage location with special stock indicator F = Unrestricted company own stock and priority indicator is 1 for the both).
    5) I assign Stock Determination Rule to Inventory Management & Production Order.
    6) I determine Stock Determination Group in Material Master also.
    Still the automatic determination of Valuation type is not determining while issuance of the material through 261 movement type.
    Please anyone can help me for the above issue or if there is any other way around please let me know.
    Regards.
    SAK.

    There is a Button (Icon) which you need to click for the stock to be determined, have you tried that?

  • Error while issue material against production order

    Hi,
      In our development server recently we have created on ecompnay code and plant by copying the one existing company code and plant,  now for this new plant I have created new profit center with KE51  and after that I have create done cost ceneter in that this new profit center is assign   now while goods movment with MB1A with movmen type 201, 202  it works OK system is not giving any error  but while issue the material against production order in MB1A with movement type 261 system is giving error message
    No postings can be made to profit center DUMMYBAOPC in company code MT50
    Message no. KM183
    Diagnosis
    Profit center DUMMYBAOPC cannot receive postings in company code MT50.
    this profit center DUMMYBAOPC we use in old compnay code and for this new company code is not activated  for new we have new profit center  then it is  linking to that  what can be the solution.
    regards,
    zafar

    Hi,
      After asigning new profit center in the Production order problem solve.
    regards,
    zafar

  • Need a Badi to look the good issue status for prod order before good receipt in MIGO

    Hi ,
    Need a Badi to look the good issue status for compoents for prod order before good receipt in MIGO.
    Example : There are 10 comps need to be issued to production order to make any assy but 6 comps were issued
    and remaining 4 comps are not yet issued.,in this situation if I try to do goods receipt for prod order through MIGO.,system should populate the warning
    message saying still goods issue are pending for prod order.
    Please advise .
    Thanks
    Prasad

    Hi Prasad,
    Before trying with a BAdI, have you tried to control this behaviour thru the Order confirmation parameters (OPK4)?
    Note that you can have a termination in case of having problems in the goods movements..
    Take a look of this and the SAP help:
    Termination of Confirmation if Incorrect Goods Movements
    Controls if the confirmation is terminated in the event of incorrect goods
    movements.
    Use
    This enables you to terminate the confirmation in the event of incorrect
    items, for example, to prevent postprocessing records.
    Dependencies
    The indicator is only evaluated if either no process control key or one
    process control key has been stored that enbles the goods movements to be posted
    in dialog AND for which the "provide error handling for goods movements"
    indicator is active. If there are incorrect goods movements, the system behaves
    as follows:
    A log is issued that gives information on the incorrect goods movements
    If these incorrect goods movements are determined by inventory management,
    then the option of correcting these errors is offered in the error handling
    If the correction is not successful, the confirmation is terminated
    Kind Regards,
    Mariano

  • Issuing material to Service order contractor and tracking it

    Hi Experts,
    We are creating service activity PR, PO, Service acceptance as per standard SAP. We would like to issue materials to this contractor on free of cost and he would return balance material, if any.
    We can reserve material for this activity and goods issue against this reservation (using movement type 221). But this material will be consumed in project.
    Is there any solution for this?
    Regards,
    RSVRMurthy.

    Hi Murthy,
    From the scenario explaination I believe you make a common procurement for the project and provide it to the service executed by various departments such Electrical Instrumentation etc.
    In that case create a Procurement WBS element in your project structure along with the mechanical,electrical instrumentation WBS structure.Make all project related procurements under this procurement WBS element by attaching material through dummy Internal activities(as you cannot attach material directly to WBSE).
    Your department WBS element will have all the subcontractor service activities.When you want issue the material to a particular subcontractor activity,make a stock transfer from Procurement WBS element to the WBS element to which the service activity is attached(in your case 1000 M).Till now it will be in the inventory.When the subcontractor provides you the actual consumption data, make a goods issue to that service activity(in your case 800M).
    In this way you can track the
    1)total procurement of cable
    2)Cable lying with each subcontractor
    3) actual cable consumption by subcontractor
    4)actual material cost realising against the actual execution activity.
    But there are some points to be noted,
    Hope you will be following Project stock concept, with procurement type being Res+PR for WBS.In this case the reservation will be in the internal activity under with Material(Cable) is attached.That is in the procurement WBSE.So while closing the project you have to clear those open reservation.You have option for clearing open reservations while confirming.As I mentioned earlier the internal activities are dummy, you should have a control key with cost irrelevant.
    One more point to note, while issuing the material to the service activity, you have to make a manual issue as there wont be any reservation against this service activity(that is you cannot adopt details of the reservation).
    regards

  • Email PDF file name issue via output determination - order confirmation etc

    Hi,
    I can email pdf files via output determination. Unfortunately the file name is same as sapscript name. How do I change it to the name I want for example document number.
    Thanks,
    Jai

    Hi Jaideep,
    You can change the mail title at Output determination.
    T/code NACE--> Application > Outputtype> Select O/P --> select Mail title and texts --> specify your text( with language) in "title" .
    Whenever Script send via e-mail the text you have entered will apear as mail title.
    Hope this may help you.
    Lanka

  • Cannot delete a serial number assigned to a material on a contract

    Hi
    We had the BOM header material created with a serialization profile that led to creating serial numbers for both header and the components in the equipment master when a contract was created. But the business required the serial number only for the components to be created in the EM. So we created a dummy serialization profile and attached it to the header material to allow when the material used in the new contracts will not create a serial number for the header.
    The issue is with the existing contracts with the material, current workaround the business is carrying out is inactivating the serial number of the BOM header and on the contract adding the rejection code to the line items and then create new line item with the same material and continue to invoice. This breaks the link in the document flow.
    To avoid this we created some dummy material and try to move the serial number of the existing header material to the dummy material in IQ02. And when we try to delete the serial number attached to the material on the sales order. It allows to delete but when we save the document it automatically creates another serial number eventhough the material has a dummy serialization profile on the material master.
    Please let me know is there any other to acheive this instead breaking the document flow of the contracts.
    Thanks in advance
    Praba

    Hi,
    Please follow the solution below:
    1, Go to u201CMM02u201D select u201CSales Genrl/Plantu201D Tab, in this remove serial Number profile assigned to the material master, and save
    2, Go to u201COIENu201D, here you deselect the u201CSerial Numberu201D group, by which the assignment of continuous serial No. with No. range would be un-assigned, and save.(use this option provided if you assigned your serial numbers using "OIEN")
    3, Please also try u201CDeactivatingu201D the serial Nos. in the following Menu Path:
    Plant Maintenance & Customer Service > Technical Objects > Serial No. Management > Deactivate Lock for Internal assignment of Serial Numbers.Here you may have to deselect the u201CNo Blocku201D for u201CCu201D RFID Equipment with Serial Number or your assigned category, and save.
    Now try with your process, I am sure it should work out.
    Regards
    DSR
    Edited by: D.Srinivasa Rao on Nov 26, 2011 6:41 AM

  • Table for storing serial number data assigned to material in delivery doc.

    Hi All,
    Kindly tell me the table name in which the serial numbers assigned to the material in the delivery document are stored.
    I have seen VBPM table, but it is not been updated.
    regards
    Ravi

    Hi
    There is no particular table wherin the serial number is stored for a material. A Ztable has to be created for the serial number to flow from the delivery.
    For a combination of material and serial number, there exists an equipment number. Go to IQ03 and enter the serial number and get the equpment number details. Go to table EQUI and enter the equipment number to get the serial number (SERNR field).
    Award points if the above info helps.
    Regards

  • Serial number status of semi finished material.

    Hi Gurus,
    I have a serialized finished product.
    I have a serialized semi finished material as a component of that finished product.
    After issuing the semifinished to the production order of the finished product, the serial number status of the semifinished item becomes AVL.
    I dont want the semifinished serial number to be reused once it is issued to a production order and the finished material from that production order is delivered .
    Help me in acheiving this.
    Thanks in advance.
    Regards,
    Gowrisankar.p

    Hi Gowri Shankar,
    You should maintain a User Status Profile for the Serial Number Profile, (Through Equipment Category).
    Once the Semi finished Material with a particular Serial Number is Issued for a production order. The status should change to Say " Used". Then this Serial Number cannot be assigned again to a new Semifinished Goods.
    User Status profile should be defined in transaction BS02.
    Thanks And Regards,
    Balasubramanian.

  • Getting error in ME22 " Account assignment mandatory for material"

    Hi SAP Gurus,
    In ME22 tansaction I am entering 1 new line item, and system is not allowing and throwing error as " Account assignment mandatory for material:8121-1045 ( Enter account assignment catagory) but user dont want entering account assignment is mandatory. Please give your input on this issue.
    Thanks,
    Sharan.

    Hi Sharanappa
    The account assignment catagory becomes Mandatory when
    "Value Updating" is Not selected for the particular valuation Area for the Material Type
    For Maintaing the same pls follow the below Path
    SPRO>LOGICTICS GENERAL>MATERIAL MASTER->BASIC SETTING->MATERIAL TYPES-->DEFINE ATTRIBUTES OF MATERIAL TYPE
    Regards
    Vikrant

  • Report as per Customer Account Assignment group or Material Account Assig

    Hi,
    I require report as per customer account assignment group or material account assignment group.
    Can you please tell me how to fullfill this requiremetn.
    I have go for ZReport or any standard report is available.
    Regards,
    ch.srinivas

    Hi,
      You could have gone for a query but unfortunately,you cannot use table TSTMT in a query so I think ZREPORT would be a better option.
    Regards
    Karan

  • VAT against Free Issue Material

    Dear Sir,
    We have a scenario where we get Free Issue Material from our Customer . We do MIGO against the receipt of  such Material , without referencing the Purchase Order .
    We are required to avail the VAT also against the receipt of such Material .
    We request sap gurus to kindly guide us as what steps are required to be followed to  avail / record the VAT  against such supplies .
    Rgds
    B Mittal

    hi
    there is no value , where is the possiibility of VAT .VAT is nothing but value added turnover.
    regards
    srinivas kona

Maybe you are looking for