Serious problems after upgrade to firmware 5.1

Hi, I have uploaded firmware 5.1. to my iPhone 4 and ever since the phone crashes frequently and goes into "repairmode".....I only get to restart it pressing Home and "On" Button for longer....I tried setting it up as new iPhone but problem continues...anybody any idea? Best iFitch55

You're welcome.
An iOS update cannot cause a hardware failure. It can bring an underlying and unknown problem to the surface but not cause it.
If this were possible and the update caused this for many iPhone 4 users, the habitual whiners would be here in droves. If someone else did experience the same, this would change or do what for you?

Similar Messages

Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu

Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu, for which i never kept any password.
Any DEFAULT Password so that i can unlock the settings menu.

That's quite odd, just repeat the update process
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Serious Problem After Upgrading Firmware

After upgrading the firmware to my Airport Express, Airport Admin Utility doesn't recognize the base. The AE seems dead, the reset daes'nt work, but the lights still flash. Does anyone could help me?
PS: I'm sorry for my english!

When you say base, is the Airport Express your base or do you have another base station. If you have another base station, once you factory reset the Express, it no longer recognizes your wifi system. If your Express is your base and the only router in the system. Unplug it, take a paper clip or ball point pen. Push in the on the reset button, continue to hold the reset button in while plugging in the Express into your power outlet. Hold the button while the amber light flashes several times and then becomes solid. Then you can release the reset button and wait for the Airport to reinitialize. Then run your utility again scanning for the base which will show up identified by its factory ID, not what you named it before. When you bring it back into your system whether as a base station or extending the range of your computer name it a different name than you did before and use a different password.

N73 - Another Problem after upgrade the firmware t...

Except the slow contact search problem (solved by Unplug the battery), I still suffered from some application install problems.
1. Whenever I restart the phone, a message 'Installing' always poped up, and the phone not responding for around 2-3 minutes. And then an error message 'Unable to complete ....' prompted.
2. The K-Mobile Client application losted after upgrade, and I tried to reinstall it , but resulted error by 'File corrupted'

Usually that annoying installation process in the beginning can be removed by deleting that installation file in MMC>\Private\10202dce . Most of them does not have the real title of the application. To delete the right one, you need to go to the application manager first and look at the title of the application that cannot be installed nor removed. Ones you know the titles, plug in ur phone to ur computer and browse MMC>\Private\10202dce , some title of the applications from the application manager should be listed there. Delete whatever you find is listed "not installed" in application manager (app cannot be installed or removed), but first make sure to make a backup of it somehow just in case you make an error. After you delete the file/files restart ur phone. The annoying installation process should not appear anymore. Note that by just removing that file may not fully remove the files it created. For advice, if you install applications in ur phone make sure you have backup of them stored in ur computer so that if the installed applications in ur phone stops working properly all you need to do is to reinstall using the original/backup sis files.
- Is this a Signature? -

Serious problem after upgrading to 10.6.3

After I've upgraded to 10.6.3 my MacBook Pro has done some strange thing (actually 2 times). I think it has something to do with Safari.
The situation happened the same way 2 times - I've started Safari and click on one of Top Sites. At that time macbook freeze (just mouse could move, but f.e. dock didn't change the size when I move to there) and after few seconds the monitor starts blinking (for few seconds). When I tried to do something (click somewhere, change volume etc.) it somehow did it after few seconds (15-20). But the computer didn't come back to normal. So after, let's say, 2 minutes I had to turn it off by pressing power button for few seconds...
It is really strange and I'm kind of worried of my macbook. Please help!

Hurray!! Solved!
The QTip was the solution. I couldn't see any dirt inside, and compressed air didn't help either. Also the first round or QTipping wasn't working - but then, gently turning and even more gently pressing turned out to be it.
A little grey color on the white cotton showed, that something definately was not right here. And now it works.
Thanks guys.
P.S. Even though I'm lucky to have one of three german Apple Stores nearby, I'm happy to not needing a new logic board..

USB Share broken after upgrade to Firmware 1.05.36

Hi, Problem after upgrade to Firmware 1.05.36. When connecting USB disk there no share created for the newly connected disk. The result is: Broken functionality backup to USB diskBroken functionality restore from USB disk It worked OK before thefirmware upgrade (I have been using this a lot). I have checked through ssh login: the disk mounts ok. Please fix!!

Yes, that's exactly what I mean - the shares that are automatically created when you insert the drive (ie the functionality you seem to have lost). There's no setting to enable/disable that, at least that I know of. It should just always automatically do it. The shares themselves are just links in the /shares folder, to the relevant mount folder if what I can see on my MCM via SSH is what I think it is. You may be able to manually make the links yourself via the command prompt as a work-around. Please note that I haven't tried this myself, as my one works. But what I would do is try and install the firmware image again over the top of your current one. You can download it manually from this page and then install it via the dashboard using Settings > Firmware Update > Manual Update. There should be a button there that you press and point it to the firmware image file you downloaded and stored on your local machine. If the button isn't there, try a different browser (I find on my Windows machine it doesn't appear under Chrome, I have to use IE for that job).

Problems after upgrade bios to v4.3 - P67A-GD65

Hi to everybody,
I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
Also there was information about what is new in this version of bios fw as:
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
so may be there have benn occured a problem that mb can not save edited settings correctly?
3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
Thanks for your replies from now on.
Greetings.

Quote from: momosala on 02-April-13, 17:54:22
I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
Flash using method 1.
And tell us if that works.
thank you for reply that fast i will try asap and tell here.
Btw, have you ever face a problem as i wrote above?

Problems after upgrade: Leopard to Leopard no longer works

My sister upgraded to Leopard on her iMac(c2d) to Leopard yesterday. Earlier in the day we were able to do video chats with a number of people(her machine Tiger to Fathers machine Leopard). However, since upgrading, we've experienced weird behavior for video chats. Basically in her window she won't see her image(the small one), and I don't see her at all. We've tested this out with a number of other iChat accounts and get the same results. Btw, all machines that are chatting with her are using Leopard. Also, all other forms/capabilities work: screen sharing, sharing of pictures, audio chats.
Anyone out there have similar problems after upgrading from Tiger to Leopard? I have done the usual adjustments of bandwidth and QT settings, as well as restarts. What else should I try?
tia,
n

I finally resolved this problem: I think the issues/steps would be helpful for anyone who experiences iSight off or not working problems after upgrading to Leopard(then to 10.5.1) on a intel 20" iMac :
Problem:
-If you have an internal iSight on an iMac and your camera works fine in Tiger
-If you upgrade to Leopard
-If Chat camera doesn't show your image (iSight off) even though the green light is on
-You can see the other persons video on iChat
-Your friends can here you and you can share screens, files, etc.....everything but have them see you
These are the initial steps I took:
- Deleted the pLists(or stored preferences for the Application) described at the top of this thread
- Was told it might be slow internet connection so did various things: disconnected other computers, changed wireless to "G" only
- Specifically Opened of ports spec'd for Leopard on router (even though I hadn't needed to do this under Tiger)
- Tried chats with various people on various fast/slow networks
- Restarted all aspects of the network: router, wireless access point, computer
- Checked to see if the iSight was shown in 'System Profiler'. It was found in 'About This Mac->More Info->System Profiler->USB'
- Clicked Video icon in iChat Buddies window(to the right of your name) and coudn't see my image
- Opened 'PhotoBooth' and coudn't see my image(black screen)
- Opened iMovie and couldn't capture video via the iSight(black screen)
- Opened iChat->Preferences->Video and couldn't see my image
- Validated that 'Camera is Enabled' in iChat->Video->Camera is Enabled
If you are experiencing a similar problem with you built-in iSight, I would probably focus on the last 5 things that I did. What they showed me was that the iSight was just not capturing video even though it was capturing sound in 3 different applications.
The solution to iSight Off or iSight Not Responding or No Video is......reset your computer! I had thought my sister performed this but it turns out she hadn't. Here's the link to this procedure:
http://docs.info.apple.com/article.html?artnum=303446
Very easy to do though: Power off computer and unplug all cables, including power cable for at least 15 seconds. Plug everything back in and power up the computer and retry clicking on the 'Video' icon next to your login name. If you see yourself then...problem is solved.
While I eventually found posts in several other forums, it took me the better part of a week. To try this simple step. I wish I had done so straight away. Oy. I guess I learned a lot about ports, speed etc.
I hope this helps.

Problems after upgrading to iTunes version 6

Hello,
I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
1. deleting sidb file
2. doing the msconfig thing suggested in discussion boards
3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
I'm not sure where to go from here.
Any help would be apppreciated -- I'd like to be able to open iTunes!

Hello,
I used Nickroo's post:
I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
Windows XP

Permission problems after upgrade to 10.5 on early Power PC G5 Tower

Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
The Xserve runs 10.3.9, any help would be greatly appreciated.
We have read through the forums regarding permission problems after upgrading and even tried some tips found here.

You really should check things out first before speaking.
Here are the requirements for 10.5;
Mac OS X v10.5 Leopard requires:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Some features require a compatible Internet service provider, fees may apply.
Some features require Apple's MobileMe service; fees apply.
Allan

Choppy video streaming after upgrading E4200 firmware to ver. 1.0.03

Video streaming was fine until I upgraded the firmware. Is it possible to downgrade the firmware?

You mentioned in your post that you upgraded the latest firmware. So after upgrading the firmware did you reset the router? It is recommended to reset the router after firmware upgrade. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. After this process reconfigure the router. Power light should blink when you perform the reset process.
After the process reconfigure the router as per the ISP setup.. Then try to do the following steps:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
          1] Open the software and go to the option which says "Router Settings"
          2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
         3] Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your router's main/ basic setup page)
         4] Then go to the Wireless tab, keep network mode as mixed,
For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

Layouts problem after upgrade

Hello, I have a problem after upgrade from 2007 to 8.81 PL 05.
Since we upgrade SAP, the layout changed.
For example, in a credit note if it has 3 lines, in the layout will appear 2 lines in a page and 1 in other page.
if the credit note has 4 lines, in the layout will appear 3 lines in a page and 1 in other page.
What could it be?
Thanks in advance.

Hi!
lines are not duplicated, they just printed on different pages:
- if doc has just 2 lines - printed form is good
- if doc has 3 items, two of them are printed on the first page, 3d - on the second page
- if doc has 4 items, 3 of them are printed on the first page, 4th - on the second page
When we are printing directly from the server everything is working fine. But printing from all Clients gives us this issue that is described above.
SAP re-installation for all users will take too much time. May be exist any other option that we can try?
we really appreciate your help
Natalia

Problem after upgrading to ICS 4.0.4

i have different problem after upgrading my SE Live with Walkman to ICS 4.0. After upgrading, my sd card always full. I have try to remove some files but after that it full again. Finaly i found that there are tumbnail file with size precisely same with my empty space. I delete that file, but the empty space not recover, its only recover after unmounting sd card. But its not hold for long time, after one minutes its happen again, my sd card is back fully again, and the same file is back to exist. Please help me, is that a virus or bugs from ICS?? i very frustation with this case
thanx for your help

Do you have many pictures?
Have your tried to reinstall the phone software using SUS to check if the problem remains?
http://www.sonymobile.com/gb/tools/update-service/
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Several problems after upgrading to iO6

My iphone is with multiple problems after upgrading to iOS 6. Applications are closing alone, the screen goes black and then back to the home screen. does not connect to internet (3G and Wi-Fi) connections as cutting. Throw another quick update to fix this, or do I have to change to the Galaxy SIII; Iphone is Terrible!!

Try the Padma extension.
*Padma: https://addons.mozilla.org/firefox/addon/padma/

Serious problems after Mavericks installation with External Drive Lacie P9220.

Experiencing serious problems after Mavericks installation with External Drive Lacie P9220 1TB. Mac Finder totally locked!
I had to format the External hard drive with a Windows PC (fat32), then format again with my IMac (mac Journal.) and hopefully restored data from time machine backup.
So far so good but system looks unstable. Some software were not able to write on the hard drive.Some strange things happens. With Mountain Lion never had an even minor issue.
I read many discussion regarding problems with WD, just wondering if anyone had the same problems with Lacie and if there is any tip to solve the
problem.
Many thanks.
Marco

Thanks very much for your reply.
Unfortunately I couldn't find a solution because the article refers to whom have configured the drive with included software and drivers that came with the drive.
This is not my case, I never used any third party soft ...only OS X disk utility ...
best
marco

Serious problems after upgrade to firmware 5.1

Similar Messages

Maybe you are looking for