Server console doesn't show EJB section

Hi!
I tried to deploy EJB example (statelessSession.Trader) for WebLogic Server 5.1
(sp8) on NT 4. Server said that the ejb deployed, but I don't see ejb section
in the server console. There is only "console subsystem" in console screen. When
I run a client for the statelessSession.Trader I get a notion "Exception in thread
"main" java.lang.NoClassDefFoundError: javax/naming/NamingException". What is
wrong?

Better to make sure the EJB is deployed. You can run "java weblogic.Admin
t3://localhost:7001 xx xxx LIST" to browse the JNDI tree
"Alex" <[email protected]> wrote in message
news:3add1d05$[email protected]..
>
Hi!
I tried to deploy EJB example (statelessSession.Trader) for WebLogicServer 5.1
(sp8) on NT 4. Server said that the ejb deployed, but I don't see ejbsection
in the server console. There is only "console subsystem" in consolescreen. When
I run a client for the statelessSession.Trader I get a notion "Exceptionin thread
"main" java.lang.NoClassDefFoundError: javax/naming/NamingException". Whatis
wrong?

Similar Messages

Server 2008 Fax Server console doesn't show outgoing faxes

We are sending faxes from Windows XP clients through our Server 2008 Fax Server. Most of the faxes are sent, however the Server Fax Console never shows any faxes as being sent. The Fax Console does show the Incoming faxes that have been received. What can I do to get a log of the outbound faxes so we know they were sent successfully?
Thanks.

Hi,
Thanks for the post.
Please perform the following steps to check it:
Open Fax Service Manager.
In the left pane, right-click Fax, and then click Properties.
3. On the Archives tab, please check the "Archive all faxes to this folder" item, and the sent faxes will be stored in this folder.
In addition, you could also use the following method enable activity logging for a fax server.
Open Fax Service Manager.
In the left pane, right-click Fax, and then click Properties.
On the Activity Logging tab, select the Log incoming fax activity check box to start logging incoming faxes and the
Log outgoing fax activity check box to start logging outgoing faxes.
You should receive an alert that the Fax service needs to be stopped and then restarted. If you do not, then right-click
Fax, click Stop, right-click Fax again, and then click
Start.
Thanks,
Miles
This is not a fix for this issue. I would hardly call this a workaround. We have admins that need to address fax sending issues when the faxes don't go through. Seeing the global outbox and sent items is a must for us. It needs to be
available from the fax console so the admin (secretary types, not IT admins) can review the issues.

Exchange 2007/2010 Console doesn't show up Exchange 2007 Databases after RBAC Implementation

I have implemented a RBAC model after which Exchange 2010/2007 Console won't show up Exchange 2007 Mailbox Databases.
Everything was working fine up until the Users were members of "Exchange Recipient Administrators" Group.
I have created Custom Roles based on PArent Roles, Mail Recipients, Mail Recipient Creation, Distribution Groups & Public Folders and assigned that to a universal security group "Helpdesk operations". I removed membership for Helpdesk operations
from "Exchange Recipient Administrators" Group and assigned the Custom Roles to "Helpdesk Operations" using the cmdlet below:
New-ManagementRoleAssignment "Custom Role" -SecurityGroup "HelpDesk Operations"
Exchange 2010 console shows Exchange 2010 Databases but not Exchange 2007 DAtabases. Exchange 2007 console doesn't show up any databases on New-Mailbox and simply displays a message "No Objects Found".
Even Get-MailboxDatabase REturns blank output on Exchange 2007 SHell. Please help me with this and let me know in case if there is something that i need to be looking at!
any help on this is much appreciated.
M.P.K ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your question. ~~ This
Information is provided is "AS IS" and confers NO Rights!!

Hi,
I recommend you use the following cmdlet and check the result.
Get-MailboxDatabase -Server "Exchange 2007 server name"
In my environment, if I don't specify the Server parameter on Exchange 2010 Management Shell, Exchange 2007 mailbox database can't be displayed. If I specify the Server parameter, Exchange 2007 mailbox database will be displayed.
What's more, please check if the account you use has been delegated the Exchange View-Only Administrator role.
Here is a thread for your reference.
Get-MailboxDatabase
http://technet.microsoft.com/en-us/library/bb676367(v=exchg.80).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

BPEL Console doesn't show any instances created

Hi,
We are using file protocol to read the files from trading partner into B2B. File is successfully processes by B2B. I can see that in reports.
Then I have defined a BPEL process to Dequeue the messages from B2B using AQ Adapter, transforms and places the files in the local file system.
The BPEL process is simple flow with one receive , transform and invoke activity.
I have configured AQ adapter using WSIF browser. I can see the deployed document definition in browser.
I have the TP agreement deployed, BPEL process deployed, but I don't see the 850 file processed. BPEL Console doesn't show any instances created. How would I know where what went wrong?
Please help.

Try using java oracle.tip.adapter.b2b.data.IPDequeue to dequeue the message and see if you can dequeue
Then you'l be able to pin point if the issue is with your BPEL or with B2B Queue's
Kalyan

IStat doesn't show fan section

I wake up my lovely Imac MC813 today and noticed iStat doesn't show fan section at all (see screenshot):
So what happened? How I can fix this? Didn't find anything about this problem.

Click the "i" button on the top left. The option will appear, Click the "sections" tab at the top. At the bottom of the list set Fans "on". Click Done at the bottom.
Regards,
Captfred

Windows Server 2008 doesn't show install date

Windows Server 2008 doesn't show install date for applications and update.<br /><br />It only shows "Unspecified", at the very top.<img alt="" src="http://social.technet.microsoft.com/Forums/getfile/286394"
/><img alt="" src="http://social.technet.microsoft.com/Forums/getfile/286395" />

In Programs and Features, you can have more options by right click on the tabbed window showing Name, Publisher and Installed on. May be you can check that once otherwise try to reinstall the features using Turn Windows features on /off.

Oracle Application Server Control Console doesn't show any servers

Hi there.
I'm configuring the Identity Manager, and in the process of doing so, I've to user tthe OASCC to do some operations.
I've discovered how to launch the OASCC and I can access it. The problem is that after configuring the ias_admin password the main menu doesn't show information.
Here is the link to the print screen with the main menu: [http://picasaweb.google.pt/r.vilhs/Oracle#5276306768949033090]
Am I missing something?
Regards,
Ricardo Vilhena

I have the same problem and I checked my target.xml file - it was in place and it contained both target records - with port number 18200 - I tried to acces this address, but it gave 404 error - actaully - this is better than nothing - beacause it indicates that someone is listening to this port, but it has no default page to display. Well - documentation states that 18200 is Oracle Management Agent port but I have not yet figured out what to expect from it. In my installation I have observed:
1) I have running app server 10.3.1 on port 7777, but the weolcome page doesn't display the login portlet for logging in this server - so - I have not logged into it.
2) I have problems accessing app server 10.2.1 on port 15001, I guess it is down and I have tried to start it from start menu entries - without result. I guess - this is very important server - it contains the forms.
But weill - at present I cann't see anu connection between these two server and the entries in the target page on port 18100, I guess - that this page should display both server, but in the post was said only entry for on port... Maybe management agent is for boths app servers (and not separate agent for each server?)?

BPM console doesn't shows the deployed application in BPM console

Hi Friends,
i developed a BPM process in Jdeveloper and deployed in the weblogic server. Enterprise manager shows that application but in BPM workspace doesn't shows that application to initiate the process form BPM console. any one can you please let me know why the weblogic server shows this peculiar behavior?
Thanks
Hari Mandadapu

Did you create an initiator task with corresponding Task Flow within the BPM Project?
Only when you add an initiator task it will show up in the BPM Workspace.
An initiator task differs from a regular human workflow task.
Otherwise you can only start the process from Enterprise Manager or Webservice Call. Check out if the process show up in Enterprise Manager.
Regards,
Martien

Enterprise Manager Console doesn' t show the correct data

Hi everyone,
we use a oracle 10gR1 rac with two nodes.
we use the oracle enterprise manager console but it does not work all parts of.
And the console is wrong with some parts of the data shows.
for example ;
in the home page, Performans Analysis section shows the date two months earlier. Why ?
(Period Start Time 25.Ara.2010 21:00:59 Period Duration (minutes) 60,02)
other example ;
in the performans tab, host section does not show any data.
why doesn't work this section?
what can i do?
oracle version = 10.1.0.5
OS platform = AIX node1 3 5 00C5116E4C00
thanks.

Hm... could be that your machine is low on RAM for java apps (yours and OEM Console). (You can check resource consumption via perfmon)

Task manager on windows server 2008 doesn't show the memory from newly installed 2nd CPU

Hi,
We have a dual processor dell power edge t410 running windows server 2008 (64-bit), standard edition. I have recently added a 2nd xeon x5560 quad-core processor (first one is also x5560 with 32GB (4x8) memory) and 16GB ram (4x4). Seems like the new CPU is
recognized in BIOS, Dell's server admin app and task manager shows 16 vertical boxes (hyper threading is on both cpus) under Performance->CPU Usage History and these boxes show processor load spread relatively evenly across all threads. On the other hand
the additional memory for this CPU is visible in the BIOS, Dell server admin but not in the task manager, which still shows the 32gb under performance->physical memory. Rammap also shows only 32GB.. Currently running proprietary processes that along with
the metafile and windows own ring up nearly 30GB, which in turn causes system latency for GUI and apps, as if the additional 16GB are not there...
So the questions are these:
1) does anybody know why the added memory doesn't show up in the task manager / rammap?
2) if the new memory doesn't show up, does this mean that Windows does not use it (which should be impossible if the CPU is utilized, unless I am wrong about windows using the cpu..)?
Thank you,
- Kiril

Thanks for the reply Ravikumar,
Unfortunately this solution is inapplicable to my version of the OS as it is 64-bit and not 32-bit. Do you have any other ideas?
Best,
- Kiril
Yes, PAE((Physical Address Extension) is supported only on 32-bit versions of the
Windows, operating system 64-bit versions of Windows do not support PAE. For information about device driver and system requirements for 64-bit versions of Windows, see
64-bit System Design. The Address Windowing Extension (AWE) API is supported on 32-bit systems. It is also supported on x64 systems for both native and Wow64 applications.
Useful link for Address Windowing Extensions is:http://msdn.microsoft.com/en-us/library/windows/desktop/aa366527(v=vs.85).aspx
If the above info does not help you, please contact dell as suggested by
Shaon Shan.
Regards, Ravikumar P

Console doesn't show active JMS Destinations

We were running some JMS tests and hit the maximum number of
transactions limit.
Now when we try to bring up the console to see the state of our message
queues = the console dosn't show a thing on that page.
Why doesn't the console work?
Thanks

Close inactive apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen
http://support.apple.com/kb/ht5137

Logging into 'Other' (Server) login doesn't show though bind does

Working on an OS 10.5.6 Advanced server that was set and users were only using AFP, but no DNS and Open Directory. So carefully went through and set these up.The standard testing 'checkhost' and all, shows DNS is working correctly. Client computers had the DNS pointer changed and went through Dirctory Utility and did the binding. Server indicates these computers are bound. One of four client computers works as expected, "Other" shows as a login choice and can log into the server. All the different client accounts work throught this station. Three computers show as Bind being setup, but the "Other" login simply doesn't appear. All but one are running 10.5.6, with one computer running 10.4.11. All three computers that show as bound, can sign in via Go > to the AFP share(s) just fine, only the server/network login doesn't appear. Have checked everything we can think of and need further suggestions on how to resolve this issue? - Lewis

LDAP is indeed listed and home folders have been created in an Auto-Mount directory. Everything appears just like the computers on this network that are binding OK and show an "Other" login. Now I have noticed one thing... every so often when I open Directory Utility - it shows the staus as "nonresponding" with a red dot. If I hit "Connect" it changes to a green OK dot, but upon logout/login the "Other" is still not a choice. Ran Disk Repair, Repair Permissions, re-ran the combo updater of the current system - 10.5.6. Ran the unbind on the computer and removed computer from Workgroup manager... still no joy. Just do not see a way to get a reliable Bind and network login? Bind seems to be happening... but "Other" as a network login just doesn't show.

Server Admin Doesn't show info for Software Update Service

In server admin, under the settings and available updates, I see a list of available updates, but they are labelled with the hash code for the update, not the name, and the info panel doesn't show any information like it should. We have our corporate firewall configured to allow connections to the server apple uses for this service so that we can get the updates. Any suggestions?

That option is only available after upgrading to iOS 5. It appears you have a 2nd generation unit, which can not be upgraded beyond iOS 4.2.1.

Javascript console doesn't show

I have followed the procedure to enable the JS console but it doesn't come into view.
I'm designing/testing a form in Livecycle, writing code. When testing the code the console window used to show up with any error messages but it no longer shows.
I have enabled it in the Acrobat edit/pref dialog.
Any ideas? Thanks

Do you have the Acrobat application open?
What changes have you made?
Have you applied updates or had updates applied?
Have you installed Reader?
Have you upgraded to newer major version of Acrobat?

Solaris Management Console doesn't show user's groups

Hello friends:
I am using Solaris 10 under Sparc.
i am having some problem with Solaris Managemen Console
With users -> users accounts -> edit a user
when i click on Groups TAB i can read:
The groups can not be listed. You can ....
It has been running, but sice 1 day ago it doesn't...
We don't use NIS or LDAP, only files.
/etc/nsswitch.conf is nsswitch.dns
groups command runs ok
cd /etc
ruben@laika:/etc$ ls -l nsswitch.*
-rw-r--r-- 1 root sys 1120 Apr 8 13:08 nsswitch.conf
-rw-r--r-- 1 root sys 1120 Jan 21 23:29 nsswitch.dns
-rw-r--r-- 1 root sys 757 Jan 21 23:28 nsswitch.files
-rw-r--r-- 1 root sys 1248 Jan 21 23:29 nsswitch.ldap
-rw-r--r-- 1 root sys 1228 Jan 21 23:28 nsswitch.nis
-rw-r--r-- 1 root sys 1558 Jan 21 23:29 nsswitch.nisplus
ruben@laika:/etc$ groups ruben
users
ruben@laika:/etc$
Where could be the problem?
How could i reinit solaris management console server.
Solaris has been restarted a lot of times without result :(
Thank's

i have reinstalled solaris and the problem continues.
Under Solaris Management Console groups and users doesn't run ok. Editing an user i can't see groups and editing groups i can't see its users...very very extrange.
A bug?
I don't know what is happening :(

Server console doesn't show EJB section

Similar Messages

Maybe you are looking for