Server details in crm project

HI expers,
I m new in crm, can any one pls explain me about server information in crm project.
How many server usually have and how crm is implemented in real time.
testing..developing ...stage...how move the data from diff stages..
highly rewarded by the answer.
[email protected]
thanks
hiten.

Dear Hiten,
Landscape is like a server system or like a layout of the servers or some may even call it the architecture of the servers viz. SAP is divided into three different lanscape DEV, QAS and PROD.
- DEV would have multiple clients for ex: 190- Sandbox, 100- Golden, 180- Unit Test.
- QAS may again have mutiple clients for ex: 300- Integration Test, 700 to 710 Training.
- PROD may have something like a 200 Production.
These names and numbers are the implementer's discreet on how they want it or they have been using in their previous implementations or how is the client's business scenario.
Development server is used for Development. Either Development/Golden Client is used for Configuration. Then all the developments and configuration data is transported Quality Server where you would test the configuration with test data. You would transport the same to Production if everything is right.
Now whatever you do in the Sandbox doesn't affect the other servers or clients. Whenever you think you are satisfied with your configuration and you think you can use it moving forward, you RE-DO it in the golden client (remember, this is a very neat and clean client and you cannot use it for rough usage). As you re-do everything that you had thought was important and usable, you get a transport request pop up upon saving everytime. You save it under a transport request and give your description to it. Thus the configuration is transported to the Unit Test client (180 in this example).
You don't run any transaction or even use the SAP Easy Access screen on the 100 (golden) client. This is a configuration only client. Now upon a successful tranport by the Basis guy, you have all the configuration in the Testing client, just as it is in the Golden client. The configuration remains in sync between these two clients.
But in the Testing client you can not even access SPRO (Display IMG) screen. It's a transaction only client where you perform the unit test. Upon a satisfactory unit test, you move the good configuration to the next SERVER (DEV). The incorrect or unsatisfactory configuration is corrected in Golden (may again as well be practised in the sandbox prior to Golden) and accordingly transported back to 180 (Unit Test) until the unit test affected by that particular config is satisfactory.
The Golden client remains the 'database' (if you wanna call it that) or you may rather call it the 'ultimate' reference client for all the good, complete and final configuration that is being used in the implementation.
In summary:
Landscape : is the arrangement for the servers
IDES : is purely for education purpose and is NOT INCLUDED in the landscape.
DEVELOPMENT ---> QUALITY -
> PRODUCTION
DEVELOPMENT : is where the the consultants do the customization as per the company's requirement.
QUALITY : is where the core team members and other members test the customization.
PRODUCTION : is where the live data of the company is recorded.
A request will flow from Dev->Qual->Prod and not backwards.
1. Sandbox server: In the initial stages of any implementation project, You are given a sandbox server where you do all the configuration/customization as per the companies business process.
2. Development Server: - Once the BBP gets signed off, the configuration is done is development server and saved in workbench requests, to be transported to Production server.
3. Production Server: This is the last/ most refined client where the user will work after project GO LIVE. Any changes/ new develpoment is done is development client and the request is transported to production.
These three are landscape of any Company. They organised their office in these three way. Developer develop their program in Development server and then transport it to test server. In testing server tester check/test the program and then transport it to Production Server. Later it will deploy to client from production server.
Presentaion Server- Where SAP GUI have.
Application Server - Where SAP Installed.
Database Server - Where Database installed.
Regards,
Naveen.

Similar Messages

CRM project requiring offline adobe form functuonality - at what effort?

I have a requirement to implement an adobe form as part of a larger CRM project. The users of the CRM application (Sales - Web Client) will utilise adobe functionality while online to create prefilled customer visit forms which they will copy to their outlook application. The adobe form will then be used in offline mode to record details of their customer visits whilst the sales person is in the field. The visit details will need to be sync'd at a later stage back to the CRM server. I have a question as to the effort required to set this up both from an analyst and programming perspective.
Am i right in assuming the creation of the adobe form would not be that time consuming (as we intend the form itself to be relatively straight forward) and the time will be primarily taken up in developing the interface to initially create the adobe form and then to take the data back into the CRM system once the form is completed.
What kind of effort are we talking about
Thanks in advance
Eddie

Hi Satya & sanjyoti,
I am facing a pecular problem in using Adobe forms.
I am able to pass data from webdynpo application, to the Interactive form(using mappings, as mentioned by satya).
But for the same form & WD application, i am not able to pass data from the Interactive Form, back to the WD application.
My scenario is like this:
I need to show a form, with some prefilled data, such as date, userID, etc. I populate the node in my WD application, & then call the form.
The form displays the above prefilled data. Now the user has to fill the remaining fields & click on submit(Submit-to-sap button). The onsubmit property of the Interactive form is mapped to a onaction event, where WD tries to read the data entered by the user.
The problem is that on clicking of the submit button in the form, the event is not getting called.
If i use a button in the WD view itself, then the action gets called, but there is no data. In short, the data is NOT getting passed from Interactive form to WD application.
Can you please help me out with this?
Thanks,
Hanoz

Configuration Problem at Step 3 (PIP server Details)

Hi All,
I am facing problem in Configuring the Project Portfolio Management: Primavera P6-EBS Projects PIP...when i enter in to the PIP Server details screen..and filled the following details:
where as Domain name and admin port and host are default as i did in the same for domain name,admin port,host...i gave the Admin user,Admin password..fields after that when i click on Managed server dropdown menu i am getting following error:"Cannot connect server".I checked with managed server and admin server both are running only but still am facing problem...
So,Please can any one helpme to find the solution for my problem..It is very essential.
Thanks in Advance

Did you fix that problem???
I got exactly the same one and would need an idea!
Many thanks
Roland
[email protected]

SAP CRM Projects Implemented or Done in India Required Urgent and Important

hi, friends and experts
      I wish u could send me SAP CRM Projects done in india with information including, Clients Name Operations, Duration and Location as soon as possible. Its urgent and important. Pls send the details.
                                                  thanking you
                                                         with regards
                                                   PRAVEEN

There are several potemtial root causes.
+ NetWeaver Mobile/DOE is not setup
+ DOE -> CRM should be Trusted RFC
+ CRM application user ID should be in DOE

Error 500--Internal Server Error in a Project Gantt Chart portlet

Hi All
I am getting Error 500--Internal Server Error in a Project Gantt Chart portlet of Corporate Dashboard.
We have recently installed the Primavera EPPM 8.1, here are the steps we followed to setup the Primavera EPPM 8.1
1) We have created the database schemas by using automatic database setup(by clicking on dbsetup.bat on the media files)
2) Installed Weblogic server 11gR1(10.3.4)
3)Created web logic domain as admin server
4) Installed P6 Web access and deployed on weblogic domain
5)Made changes to setEnvDomain file of weblogic domain to increase the Java Heap size and to locate the location of p6.war file
6)Reastred the weblogic domain
Now we can access the Primavera but in one of the portlet we are getting Error 500--Internal Server Error.
Please le me know if I miss any thing while installing or should I modify P6 configuration settings through p6 admin confiuration console.
Also it would be greatful if any one provide me th best practice to setup Primavera EPPM 8.1.
Thanks & Best Regards
Pradeep

Hello Pradeep
please delete a folder called fmwconfig in the path yourdomain\config\ for a folder called fmwconfig
restart P6 and try again

Reports with wrong Server details (using ODBC name instead of server name)

Post Author: jomuir
CA Forum: Administration
When I save a report either in Crystal Reports 11 (File save as, Enterprise u2013 Central Management Server) or Central Manager Console, Objects New Object I get an error.
On looking at the database all reports I am adding or saving are automatically taking the wrong server details, and it is a greyed out field, so I cannot edit it. I presumed it is getting this information from my ODBC settings, but appears to be using the ODBC name/description as the server name (The Database and usernames are correct). This is happening on every report!
Any ideas what I am doing wrong? How I can save or add new reports with the correct details?
Not sure if this will help, but the error message is:- Failed to open the connection. D:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\wdcsql1.reportjobserver\~tmp117852b044ee296.rpt

Post Author: jomuir
CA Forum: Administration
No, Crystal Reports in not installed on the server, and the ODBC settings are not setup on the server. However I did add the correct ODBC settings on the server but this has made no difference.
So do I need to setup all the ODBC settings in advance of anyone saving a report (I will need to try and find obtain them all)?
Should the server also have a version of Crystal Reports on it?
One report is working but it was added by the guy that installed it, and this report is using the same database as all the reports that I have added, and should be the same ODBC settings.
The server (server username) does not have access to the original location of the reports, so it cannot run the reports - however when I save them to the server via enterprise or the import tool, does a version of the report get saved on the server? If so can you point me in the direction of them, so I can try and run them via the server?

My Mail program has gone south on Leopard on my 27-month old Macbook. I can't send, even though the server details are correct. I tried reinstalling from the install DVD - but no go: no longer compatible, evidently.. What to do?

My Mail program has gone south on Leopard on my 27-month old Macbook. I can't send, even though the server details are correct. I tried reinstalling the Mail program from the install DVD, but no go; apparently that two-year old Mail is no longer compatible with my up-to-date Leopard. I tried deleting the account (hotmail) from Mail and setting up a different account (Yahoo). After loading all the inbox two things happened: first, I still couldn't send, and second, when I closed the Mail window the whole inbox then disappeared and doesn't come back. Although I couldn't reinstall the Mail program from the install DVD, would it still be possible to reinstall the whole system from that DVD? If I do, will I lose files or will there be another problem since that DVD is now over two years old?
Thanks for any suggestions; they will be much appreciated.
P.S. I've just noticed that now I can't change the desktop picture: I go through the motions in Preferences, but the new picture doesn't appear on the desktop. Is there a systemic problem?

You are waiting for an apology to something that happened over a year ago? Really? This is why there is a manager in the store. You have a problem with an employee you speak to the manager. Just like you did on the phone. You would have gotten your apology in July 2013.
Here is the information about your upgrade fee.
Upgrade Fee
It is because when you have a problem you (customers) go running to the store and want to take up the time of the reps to fix it. Other carriers have third parties that deal with technical support and those locations are few and far between. VZW provides this directly through their stores. Also, when you subsidize a $650 and pay $200 VZW has to pay $400. Your monthly service fee doesn't begin to scratch the surface of paying that back. Not with all the money that is put into the network and its improvements.
Then over a year later you get someone on the phone who apologized and offered to waive the fee on your phone and you didn't take it? That offer won't come down the pike again.
One thing you should know is that all these employees are people and as such they sometimes come off cross. I doubt that you speak to everyone so sweetly all the time. Cut them a little slack and put this whole thing behind you after 15 months. Either upgrade with VZW or move on.

How to send mail in PL/SQL using exchange server details.

Hi Experts,
Business user has provided us the exchange server details to send mails.How can I send mails thru PL/SQL using exchange server details.

user595740 wrote:
Business user has provided us the exchange server details to send mails.How can I send mails thru PL/SQL using exchange server details.Basic answer - not easily.
Oracle supports the standard application protocol SMTP - it does not support a proprietary protocol like that used by Exchange that only works on the Windows operating system. It however provides you with the flexibility to code this yourself.
If you for example use Microsoft MAPI (Mail Application Programming Interface), you can integrate it with PL/SQL using the external procedure (extproc) feature of Oracle.
In a nutshell, extproc enables you to create PL/SQL wrappers for public DLL calls. I posted sample code that demonstrates this in {message:id=2271919}. The sample code is for calling a DLL interface on HP-UX, but the concept is identical on Windows.

Getting the Server Details.

Hi All,
I am required to develop a Composite Application Service which will give the server details like HOSTNAME and PORT NO of the deployment server.Is there any way of fetching these details ?
Could someone please help me out with this issue ?
Regards,
Gaurav.

HI,
Are you talking about SAP server??
If it is ABAP stack, you can get by system-->status
If java stack, then you can get by URL http://<fully qualified hostname>:5<nn>00
where nn is the instance number.
Regards,
Kunal.

JCO server registred in CRM

Hi experts,
We´re calling a JCO server from our CRM 4.0 Instalation and followed the instructions found in some threads, our code looks like:
Start the server
public void startServers()
// Server 1 listens for incoming requests from system 1
// (Change gateway host, service, and program ID according to your needs)
     Properties properties = new Properties();
     properties.setProperty("jco.server.gwhost", "10.0.0.4");
     properties.setProperty("jco.server.gwserv", "sapgw00");
     properties.setProperty("jco.server.progid", "JAVASERVER");
     properties.setProperty("jco.server.unicode", "1" );
     JCO.Server server = new JCO.Server( properties, repository );
     srv[0]=server;
//    srv[0] = new Server("10.0.0.4","sapgw00","JAVASERVER",repository);
for (int i = 0; i < srv.length; i++) {
try {
srv.setTrace(true);
srv.start();
catch (Exception ex) {
System.out.println("Could not start server " + srv.getProgID() + ":
" + ex);
    }//try
}//for
When we use the Server constructor we find to get the two system get connected but sumetimes with abnormal behavior, our RFC destination are set to unicode.
If we use the JCO.Server constructor to set our server to unicode, we are only able to get the system connected without receive any message.
Any suggestion?
Thanks in advance.

Hi Jose,
in the line:
properties.setProperty("jco.server.unicode", "1" );
You explicitly set the property to use Unicode. In:
srv[0] = new Server("10.0.0.4","sapgw00","JAVASERVER",repository);
You don't use this option. So I think this is the main reason.
Regards
Gregor

FTP server details

How can i find out the ftp server details from the soa instance.And i want to send the records to database,so where can i load the files,in which server i have need to load the files.How we can find out the server details to load the files from soa instance.Any body have an idea plz provide the steps.Thq

Hi',
Check this
http://niallcblogs.blogspot.com/2011/07/soa-suite-11g-ftp-adapter.html
-Yatan

Managed Server not populating while installation in SOA server detail

I am facing an issue in installation of AIA. In the screen SOA server detail, managed server is not populating in dropdown option. I have installed Weblogic middle ware fusion in which admin server and managed server is running. Both are configured for by own machine and clustering is not done
I want to know these things.
1) Is there any problem with weblogic installation or configuration. Managed server and admin server is running fine
2) Do i need to configure node management to map admin server and managed server in fusion middleware?
3) Is there any compatibility mode issue? I am running the setup as administrator in window 7 OS for 32bit windows
Please help me in resolving this issue.
Thanks

Check for the following in your target soa server:
1. SOA components are correctly deployed.
2. soa-infra deployment is running and healthy.
3. node manager is able to start and stop the managed server properly.

Index server details in Trex monitor

Hi Experts,
Can you please tell me when we click on trexmonitor in portal we will get hte details like
http server details
nameserver details
index server details
Queue server details
and where can we find the details of index server could you please let me know ASAP.
Waiting for your responses
Regards,
Shilpa.

Yes Sir,
There are errors in component monitor and i have expanaded the node ands checked the errors that are as follows,
Component Monitor --> Services --> scheduler --> attachmentscheduler startup failed :
Configuration Error: No CM system assigned to this task
Component Monitor --> Services > reporting> Startup Error: exception in startup: Invalid RID: No repository manager found for prefix: /reporting
Component Monitor --> Repository Managers > reporting> startup failed
Component Monitor --> Repository Managers >taxonomy> Startup Error: taxonomy manager: start failed
We had assigned one server node to Scheduler Tasks.
Still there is same error.

Function module to find server details

Hi all,
Is there any function module that will
fetch me the system and server details.
Thanks
Mansi

Hi,
If you want to know abt the Database Server Details pls try the following FM
GET_DB_SERVER_OPSYSTEM_DB6
MSS_MON_GET_LINKEDSERVER
GET_CHG_DYNAMICSERVER_MS
GET_DYNAMICSERVER_MSQ
MSS_DBCP_SERVERINF
MSS_GET_SERVERINF
For SAP server Details pls try the following FM
PC_OLE_SERVER_CHECK
AS4_PTF_STATUS_ALL_SERVERS
MSS_GET_ALL_APPSERVER_INFO
MSS_GET_APPSERVER_INFO
BDL_SYSTEM_INFO
regards
ravi aswani

Doubts on CRM Project.

Hi friends,
Recently I Placed BW CRM project.
90 % extractions are generic function module extractions.
how crm data is extracted to BW.
what is the role
CRM middleware,BW adapter,CRM Analytics.
MY intension is how crm extractions differ from other extractions.
Thanks,
Madhu.

Dear Madhu,
Pls find the following links.
http://help.sap.com/erp2005_ehp_02/helpdata/en/c4/80fa3a0376a51fe10000000a114084/frameset.htm
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
The main 3 analytics in CRM are Sales Analytics:
http://help.sap.com/saphelp_crm50/helpdata/en/40/fad93f2e93f106e10000000a1550b0/frameset.htm
Service Analytics:
http://help.sap.com/saphelp_crm50/helpdata/en/f1/9dfb3b699bde74e10000000a114084/frameset.htm
Marketing Analytics:
http://help.sap.com/saphelp_crm50/helpdata/en/be/92fb3b28904f73e10000000a114084/frameset.htm
Extract CRM Contract data to BW.
Thanks,
Atin

Server details in crm project

Similar Messages

Maybe you are looking for