Server Proxy --time out.

Hi,
  How can we process large amount of data in server proxy. Is there any parameter that can make server proxy run in background mode. currently the server proxy is timing out in ECC.
Thanks,
Viswas.

Viswas,
Can you pls. elaborate your rek. I mean what are you trying to do in proxy ( Code inside proxy)? You are trying to post data? or something else?
I think its better you debug your proxy code and check which statement is taking too much of time...
Follow blog below for debugging..
XI: Debug your inbound ABAP Proxy implementation
Let us know the statment which is taking too much of time.
Nilesh

Similar Messages

  • Whenever i try to update my iphone through the itunes it gives the error of server connetion time out

    whenever i tried to update my iphone through itunes it gives the server connection time out error and i am unable to update my software throught the iphone

    Hello ujl,
    The articles linked below provides steps that can help get your iPhone restored.
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/TS1275
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Cheers,
    Allen

  • 504 PROXY TIME OUT. The connection time out

    Hi
    one of our users is facing  504 proxy time out. The connection time out 
    using our ITS link.  what would be the possible solutions to reduce this kind of error.  
    Regards 
    MA.Sreenivasan

    Hello,
    If only a particular user is facing this problem, check with the user on what she/he is doing.
    if everyone is facing, have a look at ITS timeout parameters.
    ~rfcTimeOut
    ~userTimeout
    Regards,
    Siddhesh

  • I have Problem uploading photos to craigslist. It says it has a problem communicating with the server and times out. It works in explorer but not Firefox and I just recently downloaded the new version of firefox. Can you be of any help?

    Photos will not upload and the server times out.

    Well, two thoughts.
    The battery has completely discharged and will take overnight to recharge, so don't expect much in an hour.
    The battery has deep discharged and is now dead. It will never recharge and should be replaced.
    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.
    The flat fee for a battery exchange is, I believe, $99.00 USD.

  • Problem with Synchronous abap proxy time out

    Hi there.
    I have the following scenario:
                      sync                   sync
    3rd party <-->  PI    <--
    >  ERP
                       http                    abap proxy
    In the implementing class on the abap proxy i'm calling an standard BAPI, followed by a commit and returning the result.
    The 3rd party app has a mechanism that when a message fails, he'll retry each 5 mins until it gets the response.
    Last night there where some delays on ERP that cause the sync mesages to timeout, the 3rd party retried about 10 times to send the message until it finally went off. This morning i check and i have the same message 11 times on ERP!!, to my understanding if the sync comm timed out the process will abort and  the message will not be processed on ERP, does anybody knows if im missing some configuration for this to work this way??.
    Kind Regards,
    Roberto.

    Hi Roberto.
    There are a lot of time out configures in PI .
    Follow the link that explain about this:
    How to Investigate Timeouts In Synchronous XI PI Scenarios
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747
    I hope to help you.
    If you still keep this problem, you can ask me more about it.
    Regards..
    Bruno.

  • WRVS4400N causes my DNS server to time out

    Folks,
    I have a Fedora 11 box running behind a WRVS4400N router. From the box, standard network functionality such as ping, telnet, browsing, etc. works just fine. The problem is using the DNS server (Bind9) on the box. When this DNS server makes a request to external root servers, the connection just times out.
    As you may know, when a DNS request is made by Bind, the destination port is 53 and the source port could be anything from 1024 to 60000.
    I used tcpdump to trace the network packets. A UDP packet to port 53 of external root server is sent but the reply never comes back.
    I replace the Linksys router with another DLink router, things start to work fine. When I trace the network packets, I see that the reply is coming through. This leads me to believe that there is something wrong with my Linksys router.
    I am running the latest firmware on the router. I also did a factory reset to make sure that it is in a clean state.
    Has anyone else seen such a problem? How did you fix it?
    Thank  you in advance for your help.
    Regards,
    Peter

    did you try port forwarding? you may forward the port that will work for your DNS servers.

  • Crystal report Viewer Session times out for more data in Portal

    Hi All,         
         I am using below java SDK code to render a report in crystal report viewer. When i refresh report with more data(more parameter value) the server session times out in portal. Is there any way to fix this issue. The report loads data and then displays in Crystal report viewer, When more data is there the server times out as the server time is set to 60 sec. Is there any way to open the crystal report viewer as and when the report loads data to avoid server time out isse.
    Please help . Please let me know if I am missing something.. Thanks in Advance!!!
    CODE;
    <%@page language="java" contentType="text/html; charset=ISO-8859-1"
           pageEncoding="ISO-8859-1" session="false"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.OpenReportOptions"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.ReportClientDocument"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.ParameterFieldController"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKException"%>
    <%@page
           import="com.crystaldecisions.report.web.viewer.CrystalReportViewer"%>
           <%@page import="com.crystaldecisions.report.web.viewer.*"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%>
    <%@page import="java.io.Writer"%>
    <%@page import="java.io.IOException "%>
    <%@ page import="com.crystaldecisions.report.web.viewer.ReportExportControl" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat" %>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.DatabaseController"%>
                  <%@page
           import="com.crystaldecisions.sdk.occa.report.application.ReportSaveAsOptions"%>
           <% response.setHeader("pragma","no-cache");//HTTP 1.1
    response.setHeader("Cache-Control","no-cache");
    response.setHeader("Cache-Control","no-store");
    response.addDateHeader("Expires", -1);
    response.setDateHeader("max-age", 0);
    //response.setIntHeader ("Expires", -1);
    //prevents caching at the proxy server
    response.addHeader("cache-Control", "private"); %>
    <%
           String reportPath,Sharedpath;
           ReportClientDocument reportClientDocument;
                ParameterFieldController parameterFieldController;
                try{
                    reportPath = "reportlocation";
                 Sharedpath = "Target Location";
                    reportClientDocument = new ReportClientDocument();
                    reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
                         reportClientDocument.open(reportPath, OpenReportOptions._openAsReadOnly);
                         reportClientDocument.getDatabaseController().logon("Dbname", "dbpassword");              
                         System.out.println("Connecting...");
                       parameterFieldController = reportClientDocument.getDataDefController()
                   .getParameterFieldController();
                    parameterFieldController.setCurrentValues("", "param 1",
                         new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,29});
    parameterFieldController.setCurrentValues("", "Param 2",
                  new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23});
    reportClientDocument.saveAs("Target Report Name","Target Location", ReportSaveAsOptions._overwriteExisting);
           reportClientDocument.close();
           System.out.println("Finished...");              
    CrystalReportViewer viewer = new CrystalReportViewer();
    viewer.setOwnPage(true);
    viewer.setPrintMode(CrPrintMode.ACTIVEX);
    viewer.setReportSource(Sharedpath);
    viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
                  System.out.println("Finished...");
           }  catch (ReportSDKException e) {
                  // TODO Auto-generated catch block
                  e.printStackTrace();
    %>

    Hi All,         
         I am using below java SDK code to render a report in crystal report viewer. When i refresh report with more data(more parameter value) the server session times out in portal. Is there any way to fix this issue. The report loads data and then displays in Crystal report viewer, When more data is there the server times out as the server time is set to 60 sec. Is there any way to open the crystal report viewer as and when the report loads data to avoid server time out isse.
    Please help . Please let me know if I am missing something.. Thanks in Advance!!!
    CODE;
    <%@page language="java" contentType="text/html; charset=ISO-8859-1"
           pageEncoding="ISO-8859-1" session="false"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.OpenReportOptions"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.ReportClientDocument"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.ParameterFieldController"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKException"%>
    <%@page
           import="com.crystaldecisions.report.web.viewer.CrystalReportViewer"%>
           <%@page import="com.crystaldecisions.report.web.viewer.*"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase"%>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%>
    <%@page import="java.io.Writer"%>
    <%@page import="java.io.IOException "%>
    <%@ page import="com.crystaldecisions.report.web.viewer.ReportExportControl" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat" %>
    <%@page
           import="com.crystaldecisions.sdk.occa.report.application.DatabaseController"%>
                  <%@page
           import="com.crystaldecisions.sdk.occa.report.application.ReportSaveAsOptions"%>
           <% response.setHeader("pragma","no-cache");//HTTP 1.1
    response.setHeader("Cache-Control","no-cache");
    response.setHeader("Cache-Control","no-store");
    response.addDateHeader("Expires", -1);
    response.setDateHeader("max-age", 0);
    //response.setIntHeader ("Expires", -1);
    //prevents caching at the proxy server
    response.addHeader("cache-Control", "private"); %>
    <%
           String reportPath,Sharedpath;
           ReportClientDocument reportClientDocument;
                ParameterFieldController parameterFieldController;
                try{
                    reportPath = "reportlocation";
                 Sharedpath = "Target Location";
                    reportClientDocument = new ReportClientDocument();
                    reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
                         reportClientDocument.open(reportPath, OpenReportOptions._openAsReadOnly);
                         reportClientDocument.getDatabaseController().logon("Dbname", "dbpassword");              
                         System.out.println("Connecting...");
                       parameterFieldController = reportClientDocument.getDataDefController()
                   .getParameterFieldController();
                    parameterFieldController.setCurrentValues("", "param 1",
                         new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,29});
    parameterFieldController.setCurrentValues("", "Param 2",
                  new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23});
    reportClientDocument.saveAs("Target Report Name","Target Location", ReportSaveAsOptions._overwriteExisting);
           reportClientDocument.close();
           System.out.println("Finished...");              
    CrystalReportViewer viewer = new CrystalReportViewer();
    viewer.setOwnPage(true);
    viewer.setPrintMode(CrPrintMode.ACTIVEX);
    viewer.setReportSource(Sharedpath);
    viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
                  System.out.println("Finished...");
           }  catch (ReportSDKException e) {
                  // TODO Auto-generated catch block
                  e.printStackTrace();
    %>

  • [SOLVED] Pacstrap connection time-out

    SOLUTION: Don't be a newbie like me and not know what DNS stands for. What I did to solve my problem was simply modify my /etc/resolv.conf to point to 8.8.8.8 instead of my default gateway.
    G'day everyone, I apologize in advance for my lack of experience.
    I understand this distribution is not for beginners, but I personally love steep learning curves as it provides the most enjoyable and interesting experience for me.
    It's also the fastest way to learn.
    Albeit, I have yet to even successfully install Arch!
    I'm a little put off, but I've already deleted my Windows partition so now I am committed.
    Anyways, so I've been following the absolutely wonderful Beginner's guide. But I seem to have made some huge mistake, or something is terribly wrong.
    I'm only upto the part where it suggest typing "pacstrap /mnt base base-devel".
    However when I put that command in, I am eventually returned with:
    1 root@archiso ~ # pacstrap mnt base base-devel
    ==> Creating install root at /mnt
    ==> Installing packages to /mnt
    warning: database file for 'core' does not exist
    : : Synchronizing package databases...
    error: failed retrieving file 'core.db' from mirror.aarnet.edu.au : Connection time-out
    error: failed retrieving file 'core.db' from ftp.iinet.net.au : Connection time out
    Etc etc. I tried using the original Mirrorlist and that gave me back 30 odd different server connection time outs. So I switched to just the Australian servers. It managed to download the 'extra' and 'community' packages when I swapped (they weren't downloading earlier either).
    I've done a bit of searching (probably not enough) but I'm about to head off to sleep as it's almost midnight and I have work tomorrow. So I figured there's no harm in posting as that gives people many hours to respond. What I did find in my searching was that things like this occur when iPv6 is enabled. Unfortunately I don't have the luxury of restarting (or so I believe), because as you may have seen I'm actually trying to still install! So I'm a little stuck? Any help at all is appreciated, even if it's like
    ArchLinuxPro wrote:Get out of here, you are too noob, go look at *insert easy way to learn Arch Linux here*.
    Thanks,
    Aaron.
    Last edited by Ikbosh (2012-09-23 16:41:37)

    ajaykumar wrote:
    Hi lkbosh,
    Ikbosh wrote:Although, I started Arch up into a VM environment and had no issues installing base and base-devel.
    I think you can use those installed packages in order to install into your home computer. Please go through the following link
    Custom Local Repository - Howto
    I think it might help you in easy-install
    With regards,
    Ajay Kumar G
    Unfortunately there's no way for me to connect to this VM remotely from home. Our work network is locked up pretty tight.
    DSpider wrote:Or try the link above that: https://wiki.archlinux.org/index.php/Pa … _USB_stick
    I'd do that, but I'm too far away from getting a running Arch linux inside my VM (Ended up having to do work most of the day ), let alone enough time to configure Guest Additions
    plustwo wrote:
    can you ping google.com?
    you might also check your /etc/resolve.conf.
    and are going through a proxy perhaps?
    tnx
    Prior to deleting
    inet 192.168.2.232/24 brd 192.168.2.255 scope global eth0
    I was able to ping google. My "/etc/resolve.conf" pointed to my router and there are definitely no proxies that I'm going through.
    Off topic: Also, I just found out they are allowing pre-loading of Borderlands 2 D:
    I think I might have to just grab another SSD from here at work and use that for Linux.
    Because I deleted Windows 8 off my current SSD because it was being an arse and not letting CFDISK or Parted or GParted (Ubuntu Live) from seeing the partitions (I gave Arch ~10GB to mess with on the SSD and ~100GB on my HDD).
    Last edited by Ikbosh (2012-09-18 08:57:12)

  • Ftp time out

    when transfering a file to an ftp site, it appears final cut server first touches a new file on a remote ftp site, then encodes the source file, then starts uploading. this causes the connection to the ftp server to time out if the encoding takes a long time.
    unfortunately, i cannot change the timeout setting on the remote ftp server (not my server). anyone know how to prevent this? anyone know what fcs is using to upload via ftp? is there maybe a config file in the os where i can set a "keep alive" value?
    d.

    No, but I can give you a workaround:
    Instead of having a copy response encode to the FTP device, create a local watcher that you can set as the destination for your transcoding copy response. Be sure to wildcard exclude "fcsvr*" so that the watcher does not grab the file before it has been given its final name. On the watcher, apply a copy response with no transcode option followed by a delete response.
    If you are triggering a subscription on an existing asset to get this whole ball rolling, I also recommend adding a script response to the subscription stack after the transcode copy response. Make it do this:
    Command path = mv
    Parameters = "/<path to local watcher>/\[Title].mov" "/<path to local watcher>/\[Asset ID].mov"
    Include the quotes when you set the parameters, they are important. This response will rename your transcoded movie with a unique integer instead of the potentially FTP-unfriendly asset title value that is the default for copy responses. Of course, if your transcode makes something other than a .mov, adjust the parameters above for the file type suffix your transcode produces.

  • Secure site (OWA) times out after 10 min.

    I'm finding that Safari times out the session to OWA (Outlook Web Access) after about 10 minutes. The server side time out is set to 22 min.
    Is this something that can be fixed? I see no 'idle time disconnect' prefs in Safari.
    The PC's time out properly after 22 min.

    I found two things that were causing my troubles.
    First, port 25 on the switch going to the server was blocked. After this was opened I was able to receive mail to macosxserver02.binghamton.edu. Since this mail server is only used for Podcast Producer notifications, I'm hoping to have this port closed back down after I get Pcast Producer back up and running and fully tested.
    Second, when the upgrade from 10.5 -> 10.6 was performed, in ServerAdmin>Mail>Settings>Domain Name, only the .binghamton.edu was populated in this field, not the full domain name of macosxserver02.binghamton.edu. This was preventing me sending mail to our Google branded .binghamton.edu email addresses. Apparently 10.6 was looking locally for all the .binghamton.edu email addresses.
    A big thank you to Gordon for looking into this and helping me get this resolved.
    Cheryl

  • Delayed shutDown of server, set time?

    Hello,
    I have a macmini server and when I shut down the server it times out because I run VMware Fusin with 3 Linux VMs
    and it takes about 1,5minutes to suspend.
    Is there a way to specify the system to wait at least 120sec before shutting down?
    Sincerely,
    DB

    I'm not sure if the -t switch works in OS X, but it would be like this from the command line:
    sudo shutdown -s -t 120
    Or at a specific time:
    sudo shutdown -s -h 21:15:00
    The -f switch forces running applications to shutdown, but again I'm not sure if that switch works in OS X:
    sudo shutdown -s -f -t 120

  • Connection time out error in server proxy

    Hi
    My scenario is file to proxy. . It is synchronous scenario.
    I am giving wait time as input and in the proxy i wrote a code to wait till the inputed value and  after that send a response. it is working fine only if i give less than 60 sec.
    If i specify above 60 sec i am getting the connection time out error in SXMB_MONI.
    Please help me to solve this.
    Regards
    Divia

    To increase Timeout use
    Go to transaction SMICM........ Goto->services......choose HTTP.....edit this service.........increase maximum processing time and activate this service
    look blog for timeouts:
    The specified item was not found.

  • Oracle IRM Desktop connection to server times out

    I have installed IRM server on Linux VM and use https to make desktop client to connect to server. The desktop is running on Windows XP. I am getting connection time out very frequently when I refresh context or validate the server, which means the connectivity between desktop to server is not stable. It is very difficult to track down the root cause since there is no log for desktop client I can look at.
    Any input?
    -J

    I have the same problem. Ping works fine(http://irmserver:16100/irm_desktop/ping). There are connections both on server and on the desktop (netstat shows it). In logs on the desktop there are:
    "[5840] Сбой синхронизации для http://10.12.248.173:16100/irm_desktop
    Сообщение пользователя: "Невозможно установить соединение с сервером IRM"
    Код ошибки = 0x80040308 (0x80040E02)
    <?xml version="1.0"?><wininet_error>12002</wininet_error>
    [IrmBackground.exe]"
    On server side there is no information in the server logs.
    I am using IRM server - Oracle EL 4 x64, Oracle DB 11G x64, Oracle WL1034, irm server 11.1.1.4.0, irm desktop 11.1.20.86. Desktop on Windows XP Professional.
    There is no proxy server between irm server and desktop
    Although I found that the syncronization works after 2-3 attempts. It seems that the problem is in the short timeout of the irm desktop waitong for authorization when there are different platforms(Weblogic on linux and AD on MS)
    Edited by: tsibir on 11.02.2011 6:04

  • Session time out in Websphere Application Server

    Hi ,
    I am using Websphere Application server 5.1 . I need to set the session time out for my web application. Actually, i edited the web.xml and set the value
    <session-config>
              <session-timeout>10</session-timeout>
         </session-config>But when I am refreshing my jsp page, after 10-15 mts, i am able to get a valid page without any problem. Actually since the session time out is 10 mts , I should not get a valid page after 10 mts . I tried one more option for setting the session time out . I opened the admin console of my App server and set the session time out there too. But session not seems to be timing out after 10-15 mts. I am still able to get a valid jsp page. I have many session attributes in that page. So after 10 mts, i should not get a valid page.. I dont know, what's wrong in my configuration. If some body knows the answer please help me.
    thanks in advance.
    Aneesh K

    So what you're trying to achieve is that the ui closes or becomes invalid if no action has been performed for a certain time? That should be easy enough, install a javax.swing.Timer somewhere in your application and set it to the time you desire. Whenever the user performs an action, invoke reset() on the timer (it's a fairly cheap operation). If the timer fires, you know the timeout occured.
    You have to decide for yourself what you consider a 'user action' in this context. If you want the session to stay alive as long as the user is still doing something, just install an AWTEventListener, which can react to pretty much anything, mouse movement, keyboard input etc.

  • Session time out in Application server -reg

    hi friends
    We have Oracle Application server 10g in cluster mode in our organization. We are using Oracle Forms and Reports . But there is one issue. If the user keeps the screen idle for more than 20 min the system gets timed out and requires sdba authentication . We actually increased the time out value. But we could not able to remove sdba authentication. Our aim is to remove authentication after session time out. It is ok even if the application completely closes and comes out of the screen. But the user must not be asked to enter sdba credentials after system is idle for the time out period.
    M.C.Jayanarayan

    Hi,
    you posted this question to the JDeveloper forum, where it may be better posted to the application server forum or the Forms forum
    Frank

Maybe you are looking for

  • Firefox crashes at startup (no safe mode or profile manager; mal-ware free)

    Hello, I've been a loyal FF proponent for years. I'm running Windows 7 HP x64 with all the latest updates. The STRANGEST thing happened this week. I uninstalled my installation of firefox. I'm using a profile I've perpetuated for 3-4 years. I wanted

  • Sales Order creation using SAP NCo 3.0 x64

    Hi, I have been trying to create a sales order using the SAP NCo from Visual Studio (C#) and I'm stuck. The  code I have used is: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Threading.Tasks; usin

  • IDVD doesn't open after iMovie renders

    We just finished rendering a movie in iMovie 11.  The tutorial said that iDVD would open automatically and it just sits there.  IDVD doesn't do a darned thing.  The project is due in 3 days, so if anyone has the inside scoop, please let me know.. Tha

  • How can I set this up in Dreamweaver (pretty simple)

    In a nutshell, I need to know to have a dynamic image that automatically changes every 5 minutes or so Basically my client just asked me to add some manufacturer logos in my right nav colum (150w x 900h). The catch is he wants the manufacturer logos

  • IMovie-iDVD encoding error

    Hi All, Same story/different plot involving "there was an error during movie encoding". I made an iDVD from iMovie clips and extra .mp3 music clips. This DVD got burned and worked first time around. Then the DVD got a scratch and won't play from a ce