Serverfarm state is Out of services, still the associated VIP accepts connections.

Serverfarm state is Out of services, still the associated VIP accepts connections.
Why ?
Niklas

no....it's not related to the sticky entry.
If the server is down, the sticky entry is removed.
The ace may still accept the TCP connection if it is configured as L7....in other words, if you do any data matching/lookup (like urls, cookies, ...)
But the connection will be closed once the client sends data since ACE has no server to forward the request to.
This is expected.
Gilles.

Similar Messages

  • ACE: VIP Out of service, Still accepts TCP connections

    Hi Guys. I am looking at a issue with an ACE. SW is 3.0(0)A3(2.6)
    We have a setup where most of it appears fine. It detect the loss of rservers, probes fail, the VIP stops responding to Pings, but it still accept TCP connections, even though there is nothing behind to accept them.
    The question is, is this correct behaviour? and if so is there any reference I can look at to confirm?
    While this behaviour is inconvenient for us. I can see why it may actually be correct.
    Thanks,
    Paul.

    Hello Paul,
    This is expected behaviour for L7 LB connections:
    The 'down' VIP will reply to SYN requests, but will then send a RST packet.
    This is because the ACE doesn't know what to do with the L7 connection until it has been build up. Only when the L7 connection is 'open' we notice that all the vserver which could serve this request are down.
    So it is correct and expected, but not exactly desired. It's just a side effect of the design. So far I do not known of any plans to change this behaviour. However similar limitations have been addressed in the past, like: CSCsq17137.
    Hope this helps, Peter

  • How can I get the "Service Name" the user used to connect to the DB with

    My application has code that is dependent on the databases "Global Name" make application processing chooses. I want to switch that to the "Service Name" the the user connected to. I have looked at SYS_CONTEXT but I do not seem to see it their. Any ideas?

    Sky13 wrote:
    My application has code that is dependent on the databases "Global Name" make application processing chooses. I want to switch that to the "Service Name" the the user connected to. I have looked at SYS_CONTEXT but I do not seem to see it their. Any ideas?09:19:31 SQL> select * from global_name;
    GLOBAL_NAME
    V112
    09:19:39 SQL>

  • Excel Interactive View (excel mashup) - Is it out of service?

    Hello,
    I have an online report based on Excel Interactive View. The last week I noticed that it didn't work. I checked my code looking for bugs, but it is correct.
    So, I tried to check the status of the Excel Interactive View in the official site "www.excelmashup.com" but when I clicked on the green button (with the text "Excel Interactive View") I saw the same error message:
    "We're sorry. We're having trouble preparing the data right now"
    I've been seen this error from 10/10/13, before that day, I remember the interactive view was working fine.
    I repeated the test on Chrome v 29.0.1547.76, Mozilla Firefox
    24.0 and IE 10.0.9200.16721 with the same results from that date.
    To give you more details, if I click in the button "Excel Interactive View" at the site "www.excelmashup.com" using IE10 I see the next log on the browser's console:
    Request URL:http://excel.officeapps.live.com/x/16.0.1727.1037/_vti_bin/CrossDomainAjax.ashx/GenerateWorkbookFromHtml
    Request Method: POST
    Status Code: HTTP/1.1 500 Internal Server Error
    Request Headers 15:32:14.000
    User-Agent: Mozilla/5.0 (Windows NT 6.1; rv:24.0) Gecko/20100101 Firefox/24.0
    Referer: http://www.excelmashup.com/
    Pragma: no-cache
    Origin: http://www.excelmashup.com
    Host: excel.officeapps.live.com
    DNT: 1
    Content-Type: text/plain; charset=UTF-8
    Content-Length: 1451
    Connection: keep-alive
    Cache-Control: no-cache
    Accept-Language: es-ar,es;q=0.8,en-us;q=0.5,en;q=0.3
    Accept-Encoding: gzip, deflate
    Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
    Response Headers Δ560ms
    X-Powered-By: ASP.NET
    X-AspNet-Version: 4.0.30319
    Server: Microsoft-IIS/8.0
    Date: Fri, 11 Oct 2013 18:31:52 GMT
    Content-Type: text/html
    Content-Length: 1208
    Cache-Control: private
    In order to discard network issues when my browser request to the Office's Webservers (my local tests are made from Buenos Aires, Argentina), I repeated the experience in a server installed on the USA getting the same error.
    I guess if the service "GenerateWorkbookFromHtml" is out of service in the Office's Webservers because it is throwing a http error 500.
    Can anyone open the example without problems?
    Thanks in
    advance,

    Hi,
    Thank you for posting in the MSDN Forum.
    Since the issue is more relate to the Excel Interactive View on SharePoint 2013, I'd like to move it to SharePoint 2013 General Discussions and Questions forum.
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Please help, I can't figure out how to use the cable modem...

    I'm visiting my sister in Baltimore, Maryland for about 3 weeks, and I want to set up the internet on my macbook so i don't have to keep using her powerbook g4. She has a Motorola Comcast Cable Modem set up for her powerbook, but I can't figure out how to find the info about her connection so I can copy it down into my computer. I keep going to her system preferences section and clicking the network button, but none of the various internet connections shown are actually the one she uses to connect. Please tell me where I can find her cable provider's info in her powerbook and where, in my macbook, i can enter this information and get on the internet.
    p.s. i don't know if this is necessary info, but with the motorola cable modem came an installation disk for if you wanted to use the usb drive cord instead, but that disk isn't even read properly in my macbook. like, it lets me open up the disk and see all the files on it but it doesn't automatically start up an installation wizard so i really have no way of installing the items on the disk.

    well, i can't really tell if i am only allowed one connection with this isp. basically, whenever i plug in the ethernet cord, all of the information gets filled in in the ethernet section of the network, except for the router info. there is router info filled in on my sister's computer whenever i plug the cord into her computer, though. does that mean i can't also use the modem for my computer? sorry, this is both my first time using a mac and my first time using anything other than dial-up, so i'm pretty lost. thanks for the info you've given me thus far.

  • The agent extension is out of service. error

    The agent extension is out of service.
    ready state change and call control operations cannot be performed.
    The agent extension is back in service.
    all operations are back in service.
    I get this when the agent is just sitting there in a ready state.
    CUCM 7.0 UCCX 7.0
    I would appreciate any help you can offer.
    Dave 404 569-1752
    [email protected]

    The most common cause of this was the agent's phone restarted or a CTI interruption occured. This is typically something to start troubleshooting on UCM side. The CAD Troubleshooting Guide says essentially the same thing:
    Problem The agent’s state changed to Not Ready for no apparent reason.
    Symptom. In some situations, an agent’s state may change to Not
    Ready for no apparent reason.
    Cause. To determine the reason, check the reason code:
    ..other causes removed...
    ■ If the reason code is 32759, the agent’s state became Not Ready
    because the phone went out of service. Check to make sure the
    phone is still functional and that you can call the phone directly. If
    everything seems fine, it is most likely a temporary problem and the
    phone has since recovered. If the phone is still down, it is most
    likely a Unified CM problem. Please consult Unified CM support.
    Solution In many cases, an agent’s state becoming Not Ready is not a serious
    issue. Simply click Ready to change the agent’s state to Ready.
    To determine the reason code, do one of the following:
    ...other solutions removed...
    If the reason code is 32759, the agent’s state became Not Ready
    because the phone went out of service. Check to make sure the
    phone is still functional and that you can call the phone directly. If
    everything seems fine, it is most likely a temporary problem and the
    phone has since recovered. If the phone is still down, it is most
    likely a Unified CM problem. Please consult Unified CM support.

  • Health service agent state greyed out.

    I am having an issue with the Health Agent state and all of the agents are greyed out.  I have checked all the servers and the health service is running on all the agents and the rms.  I have restarted the service, deleted the health state folder,
    tried to repair the agents and still greyed out.  has anyone run into this issue need assistance.  scom 2010

    Have you tried the following steps.
    http://support.microsoft.com/kb/2288515
    http://blogs.technet.com/b/kevinholman/archive/2009/10/01/fixing-troubled-agents.aspx
    Juke Chou
    TechNet Community Support

  • I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go.

    I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information, his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go. Is there any way to eliminate his iCloud account and make mine the primary without rebooting it back to factory settings? There was an update, I believe, that I couldn't install because i didn't have his password that is what made me aware that his acct. was still active. I don't know what to do. Any help is greatly appreciated. Thank you.

    Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
    The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
    How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1. If you don't own another Mac
    a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    2. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    3. Partition and install OS X
    a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    c. An unusual problem may arise if all the following conditions apply:
              OS X 10.7 or later was installed by the previous owner
              The startup volume was encrypted with FileVault
              You're booted in Recovery mode (that is, not from a 10.6 installation disc)
    In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
    d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    4. Other issues
    a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • CSCts69270 - CCX CTI ports may stuck in out-of-service state when UCM Upgrade/Restart

    Symptom:
    CCX CTI ports (RP & IVR) may stuck in out-of-service state during CUCM upgrade or Restart.
    Conditions:
    During CUCM upgrade the The UCCX CTI ports (RoutePoint Triggers and few IVR ports) went into out-of-service state .
    This condition may happen during CUCM upgrade process or CUCM nodes restart. When this happens;
    The CUCM sate of down ports is "Registered".
    The UCCX state of down ports is "Out of Service"
    This was tested on following Release branch;
    CUCM Version: 8.6.2.10000-30
    UCCX Version: 8.5.1.11001-35
    JTAPI Version: 8.6(2.10000)-2
    CUCM is a 15 Nodes cluster over the LAN with 10 subscriber nodes.
    UCCX is a 2 Nodes-HA Cluster, with one Route point, and 300 ICT IVR ports.
    Workaround:
    After Upgrade completes, restart of CTIManager service from the CUCM nodes serving the CCX.
    Last Modified:
    Aug 26,2013
    Symptom:
    CCX CTI ports (RP & IVR) may stuck in out-of-service state during CUCM upgrade or Restart.
    Conditions:
    During CUCM upgrade the The UCCX CTI ports (RoutePoint Triggers and few IVR ports) went into out-of-service state .
    This condition may happen during CUCM upgrade process or CUCM nodes restart. When this happens;
    The CUCM sate of down ports is "Registered".
    The UCCX state of down ports is "Out of Service"
    This was tested on following Release branch;
    CUCM Version: 8.6.2.10000-30
    UCCX Version: 8.5.1.11001-35
    JTAPI Version: 8.6(2.10000)-2
    CUCM is a 15 Nodes cluster over the LAN with 10 subscriber nodes.
    UCCX is a 2 Nodes-HA Cluster, with one Route point, and 300 ICT IVR ports.
    Workaround:
    After Upgrade completes, restart of CTIManager service from the CUCM nodes serving the CCX.
    Last Modified:
    Aug 26,2013
    Known Affected Releases:
    (0)
    Known Fixed Releases:
    (0)

    Hello r.mata, do you have a question about this bug?  Regards, Wes

  • The Software Protection service entered the running state.

    I noticed this event fire once in minute.
     I can't see tree from leaves in System Log
    Log Name:      System
    Source:        Service Control Manager
    Date:          18.10.2012 08:44:17
    Event ID:      7036
    Level:         Information
    Keywords:      Classic
    Description:
    The Software Protection service entered the running state.
    Only big before that is that, I enabled BitLocker ??
    Some idea ?

    Hello,
    Has anything been found out about this?  We're running into the same issue except that it's logging every 30 seconds.
    Here's some info from the machines and when it's occurring:
    It only occurs when someone is connected to the machine through Remote Desktop.
    The machines are Amazon EC2 instances.
    Seems to only happen on machines that are connecting to RODC's. 
    Machines have limited connection to RODC's through security groups (machine based firewalls).
    They are Windows Server 2012 instances, small and medium instance types.  (See instance type details here:  http://aws.amazon.com/ec2/instance-types/instance-details/)
    Little or no extra software installed.  These were spun up from a basic WS2012 image and it started occurring shortly after.  There are other machines launched from the same image that do not have this issue.
    There are also some other machines connecting to the same RODC's with the same security group (firewall) settings that are not experiencing this issue.
    We are just using the standard Remote Desktop, not the 2012 Remote Desktop Services.  We have tried to install this but the install always fails.  See: http://social.technet.microsoft.com/Forums/windowsserver/en-US/3ab983ce-9290-49ec-81e6-a3adf34cb8b2/remote-desktop-services-failed-on-windows-2012-server-amazon-vpc-ec2
    The machines (the ones having this issue as well as the ones that do not have it) all have the exact same Windows updates installed.
    Here is the detail of the event:
    NOTE: Every 30 seconds it logs this exact message - entered the RUNNING state.  I do not see other messages stating it entered the Stopped state.
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="16384">7036</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-01T12:23:10.519607800Z" />
    <EventRecordID>35726</EventRecordID>
    <Correlation />
    <Execution ProcessID="520" ThreadID="588" />
    <Channel>System</Channel>
    <Computer>REMOVED</Computer>
    <Security />
    </System>
    - <EventData>
    <Data Name="param1">Software Protection</Data>
    <Data Name="param2">running</Data>
    <Binary>7300700070007300760063002F0034000000</Binary>
    </EventData>
    </Event>
    Any help or insight would be greatly appreciated...
    Thanks!
    Jeff

  • Using Caching Service when the Server Sleeps or Users have logged out?

    When the Mac Mini Server logs out all users, the OS X Server 3 should still be running to my belief.  Thus the Caching Service of the OS X Server 3 should still be running.  However, in a number of cases, I found that the time taken for an app download after the first time uses the same time for download.  So, I guess the Caching Service is not performing at all when there is no Logged-in user.
    I further wonder why there is a Sleep Button at the User Log-in Screen and no wonder that the Server will not be providing Services (e.g. Caching Service) when the Server is in Sleep Mode.  Will the Server 3 be providing Caching Service while the Mac Mini Server has enter Sleep mode and it's just my configuration problem?

    Here is an explanation of how caching server works.
    http://nbalonso.com/os-x-server-caching/
    In summary:
    Your server periodically talks to apple.  Compares notes.  Verifies it is authentic.  Gets a certificate from apple to prove it is authentic.
    If your device asks for something (contacts apple), Apple says that you have a local caching server, and responds with the info telling your device to try your local server first.  (includes certificate info, so your device is confident the local server that responds is actually authorized to do so).
    If that goes well, then fine.  If not, then you device falls back to getting the info from Apple's servers.
    If your server is asleep, then this process won't work.  Your server is supposed to phone home to apple (hourly?) to keep proving it is authorized to server updates, and to update Aple's record that it is authorized to serve updates for your private network IP address.

  • SCOM not generating alerts & The request to synchronize state for OpsMgr Health Service identified by "bdb1712b-0a9a-bbe3-9630-41f2da9f64a1" failed due to the following exception "System.Data.SqlClient.SqlException: Cannot open database "OperationsManager

    Hi Anyone can assisting on this. The SCOM 2007r2 i managed suddenly do not pump out alerts.
    I have perform full scom service restart(data access, agent, config). it no load up related datawarehouse like(stored, write)
    I also restarted my sql db services. It show me the error like this. Anyhow i can fix it
    The request to synchronize state for OpsMgr Health Service identified by "bdb1712b-0a9a-bbe3-9630-41f2da9f64a1" failed due to the following exception "System.Data.SqlClient.SqlException: Cannot open database "OperationsManager" requested
    by the login. The login failed.
    Login failed for user 'HK\svc-scomsdk'.
       at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at System.Data.SqlClient.SqlConnection.Open()
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at System.Data.SqlClient.SqlConnection.Open()
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
       at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
       at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
       at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
       at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
       at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
       at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
       at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)".

    Hi,
    I would like to suggest you reset the SDK account password (in this case, it seems like that the account is 'scomsdk'). And change the password for the account in service configuration.
    Please go through the below article for details:
    How to change the credentials for the SDK Service and for the Config Service in Microsoft System Center Operations Manager
    http://support.microsoft.com/kb/936220/en-us
    Regards,
    Yan Li
    Regards, Yan Li

  • One button login cannot change agent state because phone is out of service on 8861 phone

    I'm testing out the 88XX line of phones for our practice and I am getting the strangest error when trying to enter ready state using one button login.
    The phone states...
    one button login cannot change agent state because phone is out of service
    We are using extension mobility to login into the phone, then hitting the one button login service. (all of which works fine).
    Also if I use this same account on any of our older 79XX phones it works perfectly and I can go into ready state and receive calls.
    I only have issues on the 88XX line of phones.
    Any insight would be great, thanks.
    Davidt

    Hi Kim,
    We have seen this issue in our lab.
    But after configuring the authenticate presence and authenticate register and also you need to associate the respective session-server for the ephone-dn as shown below...it will work.
    voice register global
    mode cme
    max-dn 720
    max-pool 262
    load 7960-7940 P00308000500
    authenticate presence
    authenticate register
    tftp-path flash:
    create profile sync 0022049925121368
    ephone-dn 5
    number 1005
    allow watch
    session-server 1
    exit
    Hope it helps.
    Anand
    Please rate helpful posts

  • IPCC "The agent extension is out of service"

    We are using IPCC 4.0(3)_Build080, we have setup a new user in the system like everyone else. When this user tries to go into a ready state in the agent desktop he gets the following error:
    13:16:20 Cannot go to the ready state while the phone is out of service. Other state changes are possible.
    13:16:20 The agent extension is out of service.
    Ready state change and call control operations cannot be performed.

    Hi guys,
    Solution, for us, was to delete the phone from CUCM, and recreate it.
    This process took less than 1 minute…
    I located the device (phone) in CUCM by MAC address and deleted it.
    All  of our Service Desk phones are identical in config (they are setup for  Extension Mobility to allow for desk sharing) - so I simply "super-copied"  another SDA phone using the problematic phone's MAC, and changed the description.
    Next I associated  the 'newly created' device with the RMCM application user (User  Management > Application User > < whatever username you gave  for  your UCCX RMCM username>).
    Once the new "old" device had  registered, Joe Bloggs logged in with his extension mobility login,  logged into CAD, and was able to go 'Ready'.
    Solved.
    Information/background and initial troubleshooting:
    We are on...
    CUCM 8.0.2.40000-1
    UCCX 8.0.2.11004-12
    CAD 8.0.2.400 (says 8.0(2) at startup, the 'about' shows 8.0.2.400)
    We had the issue this morning where Joe Bloggs (SDA) was able to login to his phone (extension mobility), login to CAD (Cisco Agent Desktop), but could not go ‘Ready’ state.
    He was being presented the following error:
         07:20:29  Resource's Device is Off.
         07:20:29  The agent extension is out of service.
         Ready state change and call control operations cannot be performed.
    I logged into his device (phone) as myself and then logged into CAD. I was presented with the same error when attempting to go 'Ready'.
    Other SDA’s with the same device (phone) and device profile (extension mobility) config did not have any trouble on their phones – so appeared to have been a phone issue - or at least an issue between CUCM and the device.
    I had Joe Bloggs perform the factory default reset (unplug network cable, holding # - plug back in network cable, when line buttons flashed in sequence type 123456789*0#) – after reset, tested again, made no difference - the error persisted.
    Next, I disassociated Joe Bloggs from the DN (Directory Number/Extension) and then disassociated both the device and the device profile (ext. mobility) from RMCM ‘Application User’, saved – then re-associated – made no difference, the problem continued.
    Not sure why it happened - appears as though maybe the record of this particular device had become corrupt in CUCM somehow.
    Hope this helps someone else - as it was a lot quicker (for our setup) than disassociating user extensions and devices, etc.
    Cheers,
    Brett

  • I need to know all the questions below.  I had to restore my computer to original state and now even if I sign on it won't let me sync my ipad or iphone.  the message is that it is synced to another library and it could wipe out my data on the ipad.

    I need to know all the questions below.  I had to restore my computer to original state and now even if I sign on it won't let me sync my ipad or iphone.  the message is that it is synced to another library and it could wipe out my data on the ipad.  Am I understanding correctly? I am running Windows 7 but have never had any problems.  Thanks

    You need iTunes on the computer. There is no iTunes for your phone. See:
    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

Maybe you are looking for