Service Cost in MCI4 report

Hi PM/CO Gurus,
We are using ECC 5.0 and in MCI4 report (planner Group Analysis), Total Planned Cost, Total Actual Cost field contains data. But the report doesn't shows Service Cost, even though field is available. We are using Control Key PM03.
What need to be done for displaying the service cost in that field?
Your valuable updates are requested in this regard.
Thanks in advance,
Vinod

Hi Unmesh,
Thanks for your update. It is working. Can you please confirm one more thing in this regard? It is providing the updated cost from the day of assigning the Value categories to the Cost Key Figures. How I can update the historical cost? What is the process/procedure involved. Whether there is any standard SAP procedure for this.
Thanks & Regards,
Vinod

Similar Messages

Order cost plan in report CN41N

Hi Gurus,
Would appreciate if any one of share what is 'Order Cost Plan" in report CN41N.
Infact, the values displayed in Order cost plan column neither coincide with either Project Cost Plan nor Actual cost displayed.
Looking forward to hear and thaks in advnace.
Thanks,
PSR

Hi PSR,
Order Cost Plan in CN41N is PM Order Plan Costs figure.
If you create PM Order and assign WBS Element/Project Def in Additional Data Tab of PM Order after planning Material services system will consider WBSE as Costing object and Plan and Post cost on WBSE. It will appears in CN41N in Order Cost Plan column.
Please check
Hope this will help you.
Regards,
Swapnil Kharul.

Data missing in PMIS - MCI4 report

Hello Experts,
we are missing data of the last 3 months in MCI4 report,before this it is giving all data. Also, I have checked SPRO settings in Information System for PMCS, value categories assignment to cost key figures and found it is fine but still facing this problem. Kindly guide if i have missed something, or please guide me all config settings that is required for MCI4 report.
Thanks in Advance.
DM
Edited by: Deepak M on Feb 15, 2009 8:08 AM

Continuation:
Next I ran Setup Plant Maintenance IS (transaction OLPM, program RIPMS001). I used values as follows:
Info structure = S115 (your value would depend on what report data you are updating. You can fine the Info structure for you report by running the standard analysis PMIS report, then using the menu Extras > Selection Log to see what Info Structure is used).
Save Under Version = &( I left this as defaulted in by SAP. It appears this is a temporary version name that the data will be compiled into. Later on you copy it over to version 000.
Temporary Version = \ I left this as defaulted in by SAP
Server group = I left this blank
Number of parallel Processes = 1. When I used a value greater than 1 it caused issues with the Oracle SAPARCH file getting filled up. BASIS recommended I use a value of 1.
Name of Run = I left the defaulted value created by SAP
Package Size = 1000. I used the value defaulted by SAP
New Run = blank. I unchecked this. It appears that if I checked this it did not update all historical data.
Block all documents = blank I left this value as defaulted by SAP
Merge Parallel = blank I left this value as defaulted by SAP.
I then ran in background.
When finished I executed my PMIS reports using the temp version &( so I could check the data. However in order to be able to select the temp version on the report selection screen, I had to set user parameters MCR = u2018Xu2019 (Menu System > User Profile > Own Data > Parameters tab.)
Once I was happy the data was correct I executed Setup: Copy/Delete version (Transaction OLIX, program RMCSISCP). I executed in two steps: delete old data then copy new data.
I deleted data for my Info Structure and version 000.
Then I copied data for my info structure from the temp version u2018&(u2018 to version 000. I left all other selections on this program as defaulted by SAP.
Some SAP notes that may be useful: 64636, 779840, 112841
Hope that helps
Philip

Asset Balances & Cost Line items Report

Hi,
I am looking for a Report which would combine Asset (S_ALR_87011963)balance report and Cost line item Report(CJi3) for Projects.

Hi,
The flow is like this ( if u r using timesheets for confirmation):
CAT2 : Timesheet: Enter Times : User enters the time.
CATS_APPR_LITE : Approval of timesheet
CAT5 : Transfer to Projects.
This will post cost to Projects.
Another way of getting the Actual cost is Confirmation using CN25 or CN29.
Regards,

After Installing SQL Server 2012 Service Pack the RDL reports do not work

I installed SQL Server 2012 Service Pack on backEnd sharepoint and also on BI Server that host Reporting Service.(Before installation everything was working properly)
After this installation the RDL reports do not open and I receive this error message.
The permissions granted to user 'domain\username' are insufficient for performing this operation. (rsAccessDenied)
I also receive the same error message on changing DataSource, Parameters and subscription.
I should mention that, I am using Reporting Services in the Integration Mode. I want to open and modify RDL reports from SharePoint and inside the SharePoint Document Library.

Hi Hedayat,
Thanks for posting your issue,
To solve this problem you have to grant your SQL Reporting Service Application Pool
Account (whatever is running your SQL Service Application, see Central Admin -> Manage Service Application -> SQL Server Reporting Services)
Full Control to the web application that report is being deployed to in your particular case.
Or you could just use the powershell command below:
$webApp = Get-SPWebApplication –Identity http://yoursharepointapp
$webApp.GrantAccessToProcessIdentity(“domain\SSRSAccount”)
Also, check out below mentioned URLs for more details and fixes of this issue
http://paulliebrand.com/2013/09/25/ssrs-and-permissions-granted-to-user-are-insufficient-for-performing-this-operation/
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/4ea477ec-ea12-4a3e-bc33-2fcf9d52b84e/error-rsaccessdenied-nt-authoritynetwork-service-are-insufficient?forum=sqlreportingservices
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Key figures in Cost elemnt based report

Dear All,
I have created a Cost Element based Report for the Project using report painter. In this same report, I want to pull a key figure(the key figure is 'remaining forecast planned costs") which is coming from cost forecasting report (Report 12CTC1 from transaction CJE0).
The issue is this 'key figure' is not available for report made in report group 6P3(report group for cost element based report). Is there anyway I can pull this particular key figure in my report.
Thanks in advance !
Regards,
Mahendra Dighe

Also if you're using HR data, the employee data is time dependent, so that for each employee number there are any number of records. This may be causing the aggregate reporting condition that you mentioned. In BW it's important to recognize that the master data also can play a role in how many records are returned. The infoprovider is not the only source of additional records. For example:
Employee has three records in the time range.
Salary infoprovider has only one.
Results will contain THREE records, one for each employee record, all with the same salary record. On an aggregate basis, the salary results will be multiplied by three.
Time dependent master data can be a source of much confusion. For some HR reporting, I have created a 'most current' employee master data record that is not time dependent, and is loaded daily. I then use that for data models such as salary or other separate infoproviders.

Key figures in cost element based report

Dear All,
I have created a Cost Element based Report for the Project using report painter. In this same report, I want to pull a key figure(the key figure is 'remaining forecast planned costs") which is coming from cost forecasting report (Report 12CTC1 from transaction CJE0).
The issue is this 'key figure' is not available for report made in report group 6P3(report group for cost element based report). Is there anyway I can pull this particular key figure in my report.
Thanks in advance !
Regards,
Mahendra Dighe

Also if you're using HR data, the employee data is time dependent, so that for each employee number there are any number of records. This may be causing the aggregate reporting condition that you mentioned. In BW it's important to recognize that the master data also can play a role in how many records are returned. The infoprovider is not the only source of additional records. For example:
Employee has three records in the time range.
Salary infoprovider has only one.
Results will contain THREE records, one for each employee record, all with the same salary record. On an aggregate basis, the salary results will be multiplied by three.
Time dependent master data can be a source of much confusion. For some HR reporting, I have created a 'most current' employee master data record that is not time dependent, and is loaded daily. I then use that for data models such as salary or other separate infoproviders.

Difference between Reporting Services Sharepoint Mode and Reporting Services Add In for Sharepoint 2013

Hi, We are building company site with Sharepoint 2013 Enterprise Edition and were wondering what is the difference between Reporting Services Sharepoint Mode and Reporting Services Add In for Sharepoint 2013? What are the roles/purposes of each one? What
happens if only Reporting Services Sharepoint Mode installed or vise versa.
Thank you in advance

Reporting Services in SharePoint mode is a service for displaying, managing, and creating SSRS reports within SharePoint. The addin is a pre-req for SharePoint that is used to display reports and is required for Reporting Services in Native or SharePoint
mode, but does not by itself do anything.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Project Server 2013 Excel Services and Perfomance Point reporting

Hi
Is there a way to show Enterprise Fields that consists of multiple values in Excel Services and Performance Point reports. It seems to be a big product limitation that this cant be done out of the box
thanks
Willem
Willem

Hi Willem,
Indeed multi values custom fields are tricky to be managed through reporting.
Here is a post done by a friend on our blog about
multi value custom fields in Excel reporting.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Vendor - asset - cost center wise report

Hi Friends.
Good morning,
Please let me know vendor,asset and cost center wise report ( ie for all vendors at a time.)
Regards
Srini

Hi,
From T.Code: AR02 you will derive your expected report.
for vendor select dynamic selection and select ORIGN DATA Tab here you will get vendor field.
Regards
Viswa

"Cost Rollup - No Report" not updating costs for some items.

Hi ,
We have an issue with "Cost Rollup - No Report" program. When it is run for all items in an Organization, some item costs were not getting updated.
"Include in Cost Rollup" flag in Master Item form and in Item Costs form is enabled for these items. When we run the report for specific item , it is working fine, cost
is getting updated. Only when we run the report for all items of an org, we are having this issue. Any suggestion or help in this regard is highly appreciated.
Thanks in advance,
Pavan.

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

VA01-TAD how to capture service cost

Dear Experts,
My client has a business scenario of services done to his client site.
these services are booked in sales order with service material - item category TAD. in my pricing Procedure i have all condition types with EK01
I wish to capture the service cost in sales order with EK01 , I have entered manually it is in inactive state.
could you please suggest me the sales order capturing the service cost ?
Regards,
Pratheep

Thanks G. Lakshmipathi
I am great with your suggestions
Testing service is done by scientists at company premises , the samples are given by customer.
i have a service material , named - Water testing - in accounting view of material master - maintained 100 USD for cost involved
Now if i have punch this service material in my sales order, will it fetch the cost through VPRS condition type, maintained determined cost in item category TAD
Regards,
pratheep

Preparation of cost center wise report

hello experts,
I want to know the tcode for cost center wise expenses reports.
i have tried the ksb1 but it is working only for one cost center at a time.
i want to prepare the cost center expenses report for all cost center in company in following format.
cost center
Amount
what procedure should i follow?
Please help.

You can use KSB1 but create a Cost Center Group with KSH1 to make it easier. You can also create a group of groups to form a hierarchy so you can analyze at different levels. Hope that helps.

How to SeeThe Cost Center Budgeting Report

Hi Experts,
I am preparing the scnario for Cost Center Budgeting,once we enter the details in the budgeting plan,,we will post to the cost centers as well.after that how can we see the Cost Center Budgeting Report....will it be available in S_ALR_87013611 or anything else????
Regards
Sap Guru

You are right, i.e you can view the budget/planning report from S_ALR_87013611. But some other reports are available to view the planning data like S_ALR_87013612, S_ALR_87013613, S_ALR_87013614 where you can view the actual vs planning data. You can view only planning data from KSBL, KSBP etc.
Thanks,
Regards,
Ramnath V.

Cost center summary report

Hello,
I have to create one Cost center summary report.
I have not found line item cuve but not summary.
Is any one have any document in that.
Thanks in advance
Thanks
CPY

You can use 0CO_OM_CCA_9, 0CO_OM_CCA_1 data source for cost center line item reports.

Service Cost in MCI4 report

Similar Messages

Maybe you are looking for